Laboratory of thin film energy materials
Nimetus
Laboratory of chemical thin film technologies (until February 28, 2023)
TalTech priority area
Research classification (Frascati)
Head of the research group
Research group member
Doctoral students
Keyword
solar cells
photocatalytic coatings
Overview
The key competences of the Laboratory of Thin Film Chemical Technologies are: Development of metal oxide and chalcogenide thin films and nanostructures by cost-effective chemical and vacuum based technologies. Development of solar cells, incl. semitransparent, for building, product integrated, indoor and IoT applications. Development of surface coatings for air and water purification; antimicrobial, electronic devices, gas sensors applications.
Important results
Based on thermoanalytical studies, we proved that the new precursor, tris (Oethyldithiocarbonato) -antimony (III), is suitable for deposition of Sb2S3 thin film at low temperatures and can be used indifferent types of solar cells. Solar cells based on Sb2Se3 thin films deposited by close spaced sublimation method resulted in efficiency of 5.3%; we described the crystallite orientation and deep defects in the Sb2Se3 crystals. We described the mechanism of photocatalytic degradation of pollutants on ZnO/NiOand ZnO/CuxO heterostructures, demonstrating up to 50% higher photocatalytic degradation efficiency compared to ZnO. The results pave the way for more efficient photocatalytic materials.
Related projects
Related department
Publications related to the research group
- Dittrich, T., Sydorenko, J., Spalatu, N., Nickel, N. H., Mere, A., Krunks, M., Oja Acik, I. Synthesis control of charge separation at anatase TiO2 thin films studied by transient surface photovoltage spectroscopy // ACS applied materials & interfaces (2022) 14, 38, p. 43163-43170.
https://doi.org/10.1021/acsami.2c09032 - Chen, Z., Dedova, T., Spalatu, N., Maticiuc, N., Rusu, M., Katerski, A., Oja Acik, I., Unold, T., Krunks, M. ZnO/NiO heterostructures with enhanced photocatalytic activity obtained by ultrasonic spraying of a NiO shell onto ZnO nanorods // Colloids and surfaces A : physicochemical and engineering aspects (2022) vol. 648, art. 129366.
https://doi.org/10.1016/j.colsurfa.2022.129366 - Juneja, N., Mandati, S., Katerski, A., Spalatu, N., Daskeviciute-Geguziene, S., Vembris, A., Karazhanov, S., Getautis, V., Krunks, M., Oja Acik, I. Sb2S3 solar cells with a cost-effective and dopant-free fluorene-based enamine as a hole transport material // Sustainable Energy & Fuels (2022) vol. 6, 13, p. 3220-3229.
https://doi.org/10.1039/D2SE00356B - Spalatu, N., Krautmann, R., Katerski, A., Karber, E., Josepson, R., Hiie, J., Acik, I. O., Krunks, M. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol : interrelation between grain structure, interface intermixing and solar cell performance // Solar energy materials and solar cells (2021) vol. 225, art. 111045, 13 p. : ill.
https://doi.org/10.1016/j.solmat.2021.111045 - Eensalu, J. S., Tõnsuaadu, K., Adamson, J., Oja Acik, I., Krunks, M. Thermal decomposition of tris(O-ethyldithiocarbonato)-antimony(III) - a single-source precursor for antimony sulfide thin films // Journal of thermal analysis and calorimetry (2022) vol. 147, 8, p. 4899-4913 : ill.
https://doi.org/10.1007/s10973-021-10885-1 - Dundar, I., Mere, A., Mikli, V., Krunks, M., Oja Acik, I. Thickness effect on photocatalytic activity of TiO2 thin films fabricated by ultrasonic spray pyrolysis // Catalysts (2020) vol. 10, 9, art. 1058.
https://doi.org/10.3390/catal10091058 - Pappu, S., Nanaji, K., Mandati, S., Rao, T. N., Martha, S. K., Bulusu, S. V. Cost-effective synthesis of electrodeposited NiCo2O4 nanosheets with induced oxygen vacancies : a highly efficient electrode material for hybrid supercapacitors // Batteries and supercaps (2020) Vol. 3, p. 1209-1219.
https://doi.org/10.1002/batt.202000121 - Krautmann, R., Spalatu, N., Gunder, R., Abou-Ras, D., Unold, T., Schorr, S., Krunks, M., Oja Acik, I. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation : [journal article] // Solar energy (2021) vol. 225, p. 494-500.
https://doi.org/10.1016/j.solener.2021.07.022 - Chen, Z., Dedova, T., Oja Acik, I., Danilson, M., Krunks, M. Nickel oxide films by chemical spray : effect of deposition temperature and solvent type on structural, optical, and surface properties // Applied surface science (2021) vol. 548, art. 149118.
https://doi.org/10.1016/j.apsusc.2021.149118 - Oluwabi, T.A., Katerski, A., Mere, A., Krunks, M., L., Oja Acik, I. et al. Application of ultrasonic sprayed zirconium oxide dielectric in zinc tin oxide-based thin film transistor // Journal of materials chemistry C (2020) vol. 8, 11, p. 3730-3739 : ill.
https://doi.org/10.1039/C9TC05127A - Ping, K., Brascinsky, A., Alam, M., Bhadoria, R., Mikli, V., Mere, A., Starkov, P. et al. Fused hybrid linkers for metal–organic framework-derived bifunctional oxygen electrocatalysts // ACS Applied Energy Materials (2020) vol. 3, 1, p. 152–157 : ill.
https://doi.org/10.1021/acsaem.9b02039 - Eensalu, J. S., Tõnsuaadu, K., Oja Acik, I., Krunks, M. Sb2S3 thin films by ultrasonic spray pyrolysis of antimony ethyl xanthate // Materials science in semiconductor processing (2022) Vol. 137, art. 106209 : ill.
https://doi.org/10.1016/j.mssp.2021.106209 - Polivtseva, S., Spalatu, N., Abdalla, A., Volobujeva, O., Hiie, J., Bereznev, S. Pulsed laser deposition of Zn(O,Se) layers for optoelectronic application // ACS Applied Energy Materials (2018) vol. 1, 11, p. 6505–6512 : ill.
http://dx.doi.org/10.1021/acsaem.8b01431 - Oluwabi, A. T., Gaspar, D., Katerski, A., Mere, A., Krunks, M., Pereira, L., Oja Acik, I. Influence of post-UV/ozone treatment of ultrasonic-sprayed zirconium oxide dielectric films for a low-temperature oxide thin film transistor // Materials (2020) vol. 13, 1, art. 6, 14 p. : ill.
https://doi.org/10.3390/ma13010006 - Gaffuri, P., Dedova, T., Appert, E., Danilson, M., Oja-Acik, I., et al. Enhanced photocatalytic activity of chemically deposited ZnO nanowires using doping and annealing strategies for water remediation // Applied surface science (2022) vol. 582, art. 152323.
https://doi.org/10.1016/j.apsusc.2021.152323 - Dedova, T., Acik Oja, I., Chen, Z., Katerski, A., Balmassov, K., Gromyko, I., Krunks, M. et al. Enhanced photocatalytic activity of ZnO nanorods by surface treatment with HAuCl4 : synergic effects through an electron scavenging, plasmon resonance and surface hydroxylation // Materials chemistry and physics (2020) vol. 245, art. 122767.
https://doi.org/10.1016/j.matchemphys.2020.122767 - Mandati, S., Dileep, R., Veerappan, K. G., Ramasamy, E. Large area bar coated TiO2 electron transport layers for perovskite solar cells with excellent performance homogeneity // Solar Energy (2022) vol. 240, p. 258-268.
https://doi.org/10.1016/j.solener.2022.04.060 - Tiismus, H., Kallaste, A., Vaimann, T., Lind, L., Virro, I., Rassõlkin, A., Dedova, T. Laser additively manufactured magnetic core design and process for electrical machine applications // Energies (2022) vol. 15, 10, art. 3665.
https://doi.org/10.3390/en15103665 - Montero, J., Welearegay, T., Thyr, J., Dedova, T., Oja Acik, I. et al. Copper–zinc oxide heterojunction catalysts exhibiting enhanced photocatalytic activity prepared by a hybrid deposition method // RSC advances (2021) vol. 11, 17, p. 10224−10234.
https://doi.org/10.1039/d1ra00691f - Koltsov, M., Krautmann, R., Katerski, A., Maticiuc, N., Krunks, M., Oja Acik, I., Spalatu, N. A post-deposition annealing approach for organic residues control in TiO2 and its impact on Sb2Se3/TiO2 device performance // Faraday Discussions (2022) vol. 239, p. 273-286.
https://doi.org/10.1039/D2FD00064D - Mandati, S., Sarada, B. V. Electrodeposited chalcopyrite CuInGaSe2 absorbers for solar energy harvesting // Materials science for energy technologies (2020) Vol. 3, p. 440-445 : ill.
https://doi.org/10.1016/j.mset.2020.03.001 - Boosagulla, D., Mandati, S., Misra, P., Allikayala, R., Sarada, B. V. Pulse electrodeposited zinc sulfide as an eco-friendly buffer layer for the cadmium-free thin-film solar cells // Superlattices and microstructures (2021) vol. 160, art. 107060.
https://doi.org/10.1016/j.spmi.2021.107060 - Shtepliuk, I., Khranovskyy, V., Gogova, D., Danilson, M., Krunks, M. et al. Excitonic emission in heavily Ga-doped zinc oxide films grown on GaN // Journal of luminescence (2020) vol. 223, art. 117265, 10 p. : ill.
https://doi.org/10.1016/j.jlumin.2020.117265 - Dileep, K. R., Mandati, S., Ramasamy, E., Mallick, S., Rao, T. N., Veerappan, G. Rapid assessment of photovoltaic activity of perovskite solar cells by photoluminescence spectroscopy // Materials letters (2021) vol. 299, art. 130056, 4 p. : ill.
https://doi.org/10.1016/j.matlet.2021.130056 - Ping, K., Alam, M., Kahnert, S. R., Bhadoria, R., Mere, A., Mikli, V., Käärik, M., Aruväli, J., Paiste, P., Kikas, A., Kisand, V., Järving, I., Leis, J., Kongi, N., Starkov, P. Multi-purpose heterogeneous catalyst material from an amorphous cobalt metal–organic framework // Materials advances (2021) vol. 2, p. 4009-4015.
https://doi.org/10.1039/D1MA00414J - Spiridonova, J., Mere, A., Krunks, M., Rosenberg, M., Kahru, A,, Danilson, M., Kritševskaja, M., Oja Acik, I. Enhanced visible and ultraviolet light-induced gas-phase photocatalytic activity of TiO2 thin films modified by increased amount of acetylacetone in precursor solution for spray pyrolysis // Catalysts (2020) vol. 10, 9, 21 p. : ill.
https://doi.org/10.3390/catal10091011 - Hector, G., Eensalu, J. S., Katerski, A., Oja Acik, I., Kärber, E. et al. Optimization of the Sb2S3 shell thickness in ZnO nanowire-based extremely thin absorber solar cells // Nanomaterials (2022) vol. 12, 2, art. 198.
https://doi.org/10.3390/nano12020198 - Misra, P., Atchuta, S. R., Mandati, S., Sarada, B. V., Rao, T. N., Sakthivel, S. A non-vacuum dip coated SiO2 interface layer for fabricating CIGS solar cells on stainless steel foil substrates // Solar energy (2021) Vol. 214, p. 471−477 : ill.
https://doi.org/10.1016/j.solener.2020.12.007 - Raadik, T., Spalatu, N., Krustok, J., Josepson, R., Grossberg, M. Temperature dependent optical and electrical characterization of SnS/CdS solar cell // Thin Solid Films (2022) vol. 743, art. 139069.
https://doi.org/10.1016/j.tsf.2021.139069 - Mandati, S., Misra, P., Boosagulla, D., Rao, T. N., Sarada, B. V. Economic pulse electrodeposition for flexible CuInSe(2)solar cells // Materials for renewable and sustainable energy (2020) Vol. 9, art. 19, 6 p. : ill.
https://doi.org/10.1007/s40243-020-00177-3 - Mandati, S., Misra, P., Boosagulla, D., Tata, N. R., Bulusu, S. V. Solar energy harvesting through photovoltaic and photoelectrochemical means from appositely prepared CuInGaSe2 absorbers on flexible substrates by a low-cost and industrially benign pulse electrodeposition technique // Industrial and engineering chemistry research (2021) Vol. 60, 5, p. 2197–2205.
https://doi.org/10.1021/acs.iecr.0c05934 - Tarraste, M., Kübarsepp, J., Mere, A., Juhani, K., Kolnes, M., Viljus, M. Ultrafine cemented carbides with cobalt and iron binders prepared via reactive in situ sintering // Solid state phenomena ; 320. : Trans Tech Publications Ltd, 2021. p. 176-180.
https://doi.org/10.4028/www.scientific.net/SSP.320.176 - Tarraste, M., Kübarsepp, J., Juhani, K., Kolnes, M., Viljus, M., Mere, A. Sintering of high Mn cemented carbides in Mn-rich environment // Defect and diffusion forum (2020) vol. 405, p. 402−407.
https://doi.org/10.4028/www.scientific.net/DDF.405.402 - Sydorenko, J., Mere, A., Krunks, M., Krichevskaya, M., Oja Acik, I. Transparent TiO2 thin films with high photocatalytic activity for indoor air purification // RSC advances (2022) 12, 55, p. 35531-35542.
https://doi.org/10.1039/D2RA06488J - Mandati, S., Misra, P., Boosagulla, D., Tata, N. R., Bulusu, S. V. Control over MoSe2 formation with vacuum-assisted selenization of one-step electrodeposited Cu-In-Ga-Se precursor layers // Environmental science and pollution research (2021) vol. 28, 12, p. 15123-15129 : ill.
https://doi.org/10.1007/s11356-020-11783-z - Svirskaite, L. M., Mandati, S., Spalatu, N., Malinauskiene, V., Karazhanov, S., Getautis, V., Malinauskas, T. Asymmetric NDI electron transporting SAM materials for application in photovoltaic devices // Synthetic metals (2022) vol. 291, art. 117214.
https://doi.org/10.1016/j.synthmet.2022.117214 - Andreasen, J. W., Arca, E., Bowers, J. W., Bär, M., Breternitz, J., Dale, P. J., Dimitrievska, M., Fermin, D. J., Ganose, A., Mandati, S. et al. Novel chalcogenides, pnictides and defect-tolerant semiconductors : general discussion // Faraday Discussions (2022) vol. 239, p. 287-316.
https://doi.org/10.1039/D2FD90057B - Olukan, T., Sydorenko, J., Katerski, A., Al Mahri, M., Lai, C.-Y., Al-Hagri, A., Santos, S., Chiesa, M. Insights into TiO2 thin film photodegradation from Kelvin Probe AFM maps // Applied physics letters (2022) vol. 121, 3, art. 031901.
https://doi.org/10.1063/5.0098788 - Boosagulla, D., Mandati, S., Allikayala, R., Sarada, B.V. Growth mechanism of pulse electrodeposited cadmium sulfide and zinc sulfide thin films with tartaric acid and glycerol as additives // Thin Solid Films (2021) vol. 741, art. #139011.
https://doi.org/10.1016/j.tsf.2021.139011 - Surženkov, A., Viljus, M., Antonov, M., Kübarsepp, J., Juhani, K., Kulu, P., Vägiström, H., Jankauskas, V., Leišys, R., Bendikiene, R., Adoberg, E., Peetsalu, P., Mere, A., Gregor, A. Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substrates // Surface and coatings technology (2022) vol. 446, art. 128771.
https://doi.org/10.1016/j.surfcoat.2022.128771 - Jalakas, T., Chub, A., Vinnikov, D., Spalatu, N., Gudkova, V., Krunks, M., Mere, A.,,Lahi, A., Lindvest, A. Development and application of energy producing solar pavement in Estonia // 2022 IEEE 63th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON): conference proceedings. : IEEE, 2022. 5 p. : ill.
https://doi.org/10.1109/RTUCON56726.2022.9978908 - Andreasen, J. W., Breternitz, J., Bär, M., Dale, P. J., Dimitrievska, M., Fermin, D. J., Fleck, N., Hages, C. J., Havryliuk, Y., Hawkins, C., Mandati, S. et al. Bulk and surface characterisation techniques of solar absorbers : general discussion // Faraday Discussions (2022) vol. 239, p. 180-201.
https://doi.org/10.1039/D2FD90056D - Agbenyeke, R., Andreasen, J. W., Benhaddou, N., Bowers, J. W., Breternitz, J., Bär, M., Dimitrievska, M., Fermin, D. J., Ganose, A., Mandati, S. et al. Materials design and bonding : general discussion // Faraday Discussions (2022) vol. 239, p. 375-404.
https://doi.org/10.1039/D2FD90058K - Andreasen, J. W., Bowers, J. W., Breternitz, J., Dale, P. J., Dimitrievska, M., Fermin, D. J., Ganose, A., Gurieva, G., Hages, C. J., Mandati, S. et al. Indium-free CIGS analogues : general discussion // Faraday Discussions (2022) vol. 239, p. 85-111.
https://doi.org/10.1039/D2FD90055F - Untila, D., Evtodiev, I., Caraman, I., Spalatu, N., Dmitroglo, L., Caraman, M. Optical and photoelectric properties of nanolamellar structures obtained by thermal annealing of InSe plates in Zn vapours // Physica status solidi (a) : applications and materials science (2018) vol. 215, 4, art. 1700434, p. 1-7 : ill.
https://doi.org/10.1002/pssa.201700434 - Ganchev, M., Dimitrov, D., Stankova, S., Katerski, A., Gadjov, I., Volobujeva, O., Mere, A., Bereznev, S., Krunks, M. Electrodeposited molybdenum oxide coatings for thin film chalcopyrite solar cells // 10th Jubilee Conference of the Balkan Physical Union. New York : AIP Publishing, 2019. art. 140002. (AIP Conference Proceedings ; 2075, 1).
https://doi.org/10.1063/1.5091317 - Ganchev, M., Katerski, A., Stankova, S., Eensalu, J. S., Terziyska, P. et al. Tin dioxide thin films deposited by sol - gel technique // AIP conference proceedings. New York : AIP Publishing, 2019. art. 140001, 8 p. (AIP Conference Proceedings; 2075A).
https://doi.org/10.1063/1.5091316 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Viljus, M. Effect of carbon stabilizing elements on WC cemented carbides with chromium steel binder // Materials science = Medžiagotyra (2019) vol. 25, 2, p. 202-206 : ill.
https://doi.org/10.5755/j01.ms.25.2.19619 - Misra, P., Mandati, S., Rao, T. N., Sarada, B. V. A multi-layer Cu:Ga/In sputtered precursor to improve structural properties of CIGS absorber layer // Materials today: proceedings (2021) vol. 39, 5, p. 2037-2041 : ill.
https://doi.org/10.1016/j.matpr.2020.09.545 - Chandra Dimri, M., Khanduri, H., Mere, A., Stern, R. Studies of doped LaMnO3 samples prepared by citrate combustion process // AIP conference proceedings. [S.l.] : AIP Publishing, 2018. art. 130015, 4 p. : ill. (AIP conference proceedings ; 1942, 1).
https://doi.org/10.1063/1.5029085 - Eensalu, J.S., Katerski, A., Mere, A., Krunks, M. Gas sensing capability of spray deposited Al-doped ZnO thin films // Proceedings of the Estonian Academy of Sciences (2018) vol. 67, 2, p. 124–130 : ill.
https://doi.org/10.3176/proc.2018.2.02 - Gromõko, I., Dedova, T., Polivtseva, S., Kois, J., Puust, L., Sildos, I., Mere, A., Krunks, M. Electrodeposited ZnO morphology transformations under the influence of SeO2 additive: Rods, disks, nanosheets network // Thin solid films (2018) vol. 652, p. 10-15 : ill.
https://doi.org/10.1016/j.tsf.2017.12.004 - Krustok, J., Raadik, T., Kaupmees, R., Grossberg, M., Kauk-Kuusik, M., Timmo, K., Mere, A. Observation of band gap fluctuations and carrier localization in Cu2CdGeSe4 // Journal of physics D : applied physics (2019) vol. 52, 28, art. 285102 , 7 p. : ill.
https://doi.org/10.1088/1361-6463/ab1afd - Dedova, T., Oja Acik, I., Polivtseva, S., Krunks, M., Gromõko, I., Tõnsuaadu, K., Mere, A. Influence of solution composition on sprayed ZnO nanorods properties and formation process: Thermoanalytical study of the precursors // Ceramics international (2019) vol. 45, 2, p. 2887-2892 : ill.
https://doi.org/10.1016/j.ceramint.2018.07.274 - Grossberg, M. Raadik, T., Krustok, J., Kauk-Kuusik, M. et al. Optical and structural properties of orthorhombic and tetragonal polymorphs of Cu2CdGeSe4 // Thin solid films (2018) vol. 666, p. 44-47.
https://doi.org/10.1016/j.tsf.2018.09.031 - Ganchev, M., Katerski, A., Stankova, S., Eensalu, J. S., Terziyska, P. et al. Spin - coating of SnO2 thin films // Journal of physics : conference series (2019) vol. 1186, art. 012027, 7 p. : ill.
https://doi.org/10.1088/1742-6596/1186/1/012027 - Chen, Z., Dündar, I., Oja Acik, I., Mere, A. TiO2 thin films by ultrasonic spray pyrolysis // IOP conference series : materials science and engineering (2019) vol. 503, art. 012006, 7 p. : ill.
https://doi.org/10.1088/1757-899X/503/1/012006 - Leontie, L., Sprincean, V., Untila, D., Spalatu, N. et al. Synthesis and optical properties of Ga2O3 nanowires grown on GaS substrate // Thin solid films (2019) vol. 689, art. 137502, 6 p. : ill.
https://doi.org/10.1016/j.tsf.2019.137502 - Abdalla, A., Bereznev, S., Spalatu, N., Volobujeva, O., Sleptšuk, N., Danilson, M. Pulsed laser deposition of Zn(O,Se) layers in nitrogen background pressure // Scientific reports (2019) vol. 9, 1, art. 17443, 10 p. : ill.
https://doi.org/10.1038/s41598-019-54008-1 - Mandati, S., Misra, P., Sarada, B. V., Rao, T. N. Copper chalcopyrites for solar energy applications // Transactions of the Indian Institute of Metals (2019) Vol. 72, 2, p. 271–288 : ill.
https://doi.org/10.1007/s12666-018-1455-0 - Oluwabi, A.T., Juma, A.O., Oja Acik, I., Mere, A., Krunks, M. Effect of Zr doping on the structural and electrical properties of spray deposited TiO2 thin films // Proceedings of the Estonian Academy of Sciences (2018) Vol. 67, 2, p. 147–157 : ill.
https://doi.org/10.3176/proc.2018.2.05 https://artiklid.elnet.ee/record=b2861743*est - Dundar, I., Kritševskaja, M., Katerski, A., Krunks, M., Oja Acik, I. Photocatalytic degradation of different VOCs in the gas-phase over TiO2 thin gilms prepared by ultrasonic spray pyrolysis // Catalysts (2019) vol. 9, 11, art. 915 ; 18 p. : ill.
https://doi.org/10.3390/catal9110915 - Klauson, D., Romero Sarcos, N., Kritševskaja, M., Kattel, E., Dulova, N., Dedova, T., Trapido, M. Advanced oxidation processes for sulfonamide antibiotic sulfamethizole degradation : Process applicability study at ppm level and scale-down to ppb level // Journal of environmental chemical engineering (2019) vol. 7, 5, art. 103287, 8 p. : ill.
https://doi.org/10.1016/j.jece.2019.103287 - Kolnes, M., Mere, A., Kübarsepp, J., Viljus, M., Maaten, B., Tarraste, M. Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder // Powder metallurgy (2018) vol. 61, 3, p. 197-209 : ill.
https://doi.org/10.1080/00325899.2018.1447268 - Podgurski V., Bogatov, A., Yashin, M., Viljus, M., Volobujeva, O., Mere, A., Raadik, T. et al. A comparative study of the growth dynamics and tribological properties of nanocrystalline diamondfilms deposited on the (110) single crystaldiamond and Si(100) substrates // Diamond and related materials (2019) vol. 92, p. 159-167 : ill.
https://doi.org/10.1016/j.diamond.2018.12.024 - Javed, K., Krumme, A., Viirsalu, M., Krasnou, I., Plamus, T., Vassiljeva, V., Tarasova, E., Savest, N., Mere, A., Mikli, V., Danilson, M., Kaljuvee, T. et al. A method for producing conductive graphene biopolymer nanofibrous fabrics by exploitation of an ionic liquid dispersant in electrospinning // Carbon (2018) vol. 140, p. 148-156 : ill.
https://doi.org/10.1016/j.carbon.2018.08.034 https://novaator.err.ee/873101/ttu-teadlaste-arendatud-tselluloosikangaga-saab-vajadusel-laadida-telefoni - Mandati, S., Dey, S. R., Joshi, S. V., Sarada, B. V. Two-dimensional CuIn1-xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications // Solar energy (2019) Vol. 181, p. 396−404.
https://doi.org/10.1016/j.solener.2019.02.022 - Spiridonova, J., Katerski, A., Danilson, M., Kritševskaja, M., Krunks, M., Oja Acik, I. Effect of the titanium isopropoxide : acetylacetone molar ratio on the photocatalytic activity of TiO2 thin films // Molecules (2019) vol. 24, 23, art. 4326, 14 p. : ill.
https://doi.org/10.3390/molecules24234326 - Eensalu, J., Katerski, A., Kärber, E., Oja Acik, I., Krunks, M. et al. Semitransparent Sb2S3 thin film solar cells by ultrasonic spray pyrolysis for use in solar windows // Beilstein journal of nanotechnology (2019) vol. 10, p. 2396−2409.
https://doi.org/10.3762/bjnano.10.230 - Eensalu, J.S., Katerski, A., Kärber, E., Oja Acik, I., Mere, A., Krunks, M. Uniform Sb2S3 optical coatings by chemical spray method // Beilstein journal of nanotechnology (2019) Vol. 10, 1, p. 198-210 : ill.
https://doi.org/10.3762/bjnano.10.18 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Kolnes, M., Viljus, M., Maaten, B. Ferritic chromium steel as binder metal for WC cemented carbides // International journal of refractory metals and hard materials (2018) vol. 73, p. 183-191 : ill.
https://doi.org/10.1016/j.ijrmhm.2018.02.010 - Dündar, I., Kritševskaja, M., Katerski, A. P., Oja Acik, I. TiO2 thin films by ultrasonic spray pyrolysis as photocatalytic material for air purification // Royal Society open science (2019) vol. 6, 2, art. 181578, 12 p. : ill.
https://doi.org/10.1098/rsos.181578 - Spalatu, N., Hiie, J., Kaupmees, R., Volobujeva, O., Krustok, J., Oja Acik, I., Krunks, M. Postdeposition processing of SnS thin films and solar cells : prospective strategy to obtain large, sintered, and doped SnS grains by recrystallization in the presence of a metal halide flux // ACS applied materials & interfaces (2019) vol. 11, 19, p. 17539–17554 : ill.
https://doi.org/10.1021/acsami.9b03213 - Oluwabi, A.T., Acik, I.O., Katerski, A., Mere, A., Krunks, M. Structural and electrical characterisation of high-k ZrO2 thin films deposited by chemical spray pyrolysis method // Thin Solid Films (2018) Vol. 662, p. 129 - 136.
https://doi.org/10.1016/j.tsf.2018.07.035 - Krautmann, R., Spalatu, N., Josepson, R., Nedzinskas, R., Kondrotas, R., Gržibovskis, R., Vembris, A., Krunks, M., Oja Acik, I. Low processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defects // Solar energy materials and solar cells (2023) vol. 251, art. 112139, 9 p. : ill.
https://doi.org/10.1016/j.solmat.2022.112139 - Gopi, S. V., Spalatu, N., Basnayaka, M., Krautmann, R., Katerski, A., Josepson, R., Grzibovskis, R., Vembris, A., Krunks, M., Oja Acik, I. Post deposition annealing effect on properties of CdS films and its impact on CdS/Sb2Se3 solar cells performance // Frontiers in Energy Research (2023) vol. 11, art. 1162576, 12 p.
https://doi.org/10.3389/fenrg.2023.1162576 - Koltsov, M., Gopi, S.V., Raadik, T., Krustok, J., Josepson, R., Gržibovskis, R.,Vembris, A., Spalatu, N. Development of Bi2S3 thin film solar cells by close-spaced sublimation and analysis of absorber bulk defects via in-depth photoluminescence analysis // Solar energy materials and solar cells (2023) vol. 254, art. 112292.
https://doi.org/10.1016/j.solmat.2023.112292 - Eensalu, J. S., Mandati, S., Don, C. H., Finch, H., Dhanak, V. R., Major, J. D., Grzibovskis, R., Tamm, A., Ritslaid, P., Josepson, R., Spalatu, N., Krunks, M., Oja Acik, I., et al. Sb2S3 thin-film solar cells fabricated from an antimony ethyl xanthate based precursor in air // ACS applied materials & interfaces (2023) vol. 15, 36, p. 42622-42636.
https://doi.org/10.1021/acsami.3c08547 - Alaydaroos, A. H., Sydorenko, J., Palanisamy, S., Chiesa, M., Al Hajri, E. Efficient photoelectrocatalytic degradation of amoxicillin using nano-TiO2 photoanode thin films : a comparative study with photocatalytic and electrocatalytic methods // Chemosphere (2023) vol. 339, art. 139629.
https://doi.org/10.1016/j.chemosphere.2023.139629 - Dimri, M.C., Khanduri, H., Agarwal, P., Garg, V., Mere, A., Stern R. Magnetic studies on spinel ferrite nanoparticles and bulk samples synthesized by citrate combustion route // DAE Solid State Physics symposium 2019, 18–22 December 2019, Jodhpur, India. Melville : AIP, 2020. art. 030517. (AIP conference proceedings ; 2265).
https://doi.org/10.1063/5.0016823 - Ganchev, M., Spasova, S., Raadik, T., Mere, A., Altosaar, M., Mellikov, E. Rapid thermal processing of Kesterite thin films // Coatings (2023) vol. 13, 8, art. 1449.
https://doi.org/10.3390/coatings13081449 - Oluwabi, A.T., Spalatu, N., Maticiuc, N., Katerski, A., Mere, A., Krunks, M., Oja Acik, I. Combinative solution processing and Li doping approach to develop p-type NiO thin films with enchanced electrical properties // Frontiers in materials (2023) vol. 10, 12 p. : ill.
https://doi.org/10.3389/fmats.2023.1060420 - Spalatu, N., Krautmann, R., Katerski, A., Kärber, E., Josepson, R., Hiie, J., Oja Acik, I., Krunks, M. Corrigendum to “Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: Interrelation between grain structure, interface intermixing and solar cell performance” [Solar Energy Mater. Solar Cell. 225 (2021) 1–13 111045](S092702482100088X)(10.1016/j.solmat.2021.111045) // Solar Energy Materials and Solar Cells (2021) Vol. 228, Art. 111098.
https://doi.org/10.1016/j.solmat.2021.111098 - Montero, J., Welearegay, T., Thyr, J., Stopfel, H., Dedova, T., Oja Acik, Österlund, L. Erratum: Copper-zinc oxide heterojunction catalysts exhibiting enhanced photocatalytic activity prepared by a hybrid deposition method (RSC Advances (2021) 11 (10224–10234) DOI: 10.1039/D1RA00691F) // RSC Advances (2021) Vol. 11, 22, p. 13635.
https://doi.org/10.1039/d1ra90096j