Abrasive erosive wear of powder steels and cermetsVeinthal, Renno; Tarbe, Riho; Kulu, Priit; Käerdi, HelmoWear2009 / 11, p. 1838-1844 : ill

Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlaysVeinthal, Renno; Sergejev, Fjodor; Zikin, Arkadi; Tarbe, Riho; Hornung, J.19th International Conference on Wear of Materials : Portland, Oregon, USA, 14-18 April 2013 : conference abstracts2013 / [p. 98]

Abrasive impact wear and surface fatigue wear behaviour of Fe–Cr–C PTA overlaysVeinthal, Renno; Sergejev, Fjodor; Zikin, Arkadi; Tarbe, Riho; Hornung, JohannWear2013 / p. 102-108 https://www.sciencedirect.com/science/article/pii/S0043164813000999 https://doi.org/10.1016/j.wear.2013.01.077 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Abrasive wear resistance of powder composite materials : characterization and predictionVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, Helmo; Tarbe, RihoTribology 2008 : proceedings of the 9th International Tribology Conference : University of Pretoria, South Africa, 2-4 April 20082008 / p. 1.3(1)-1.3(10)

Abrasive wear resistance of powder composites at abrasive erosion and abrasive impact wearKulu, Priit; Veinthal, Renno; Käerdi, Helmo; Tarbe, RihoMaterials science2008 / p. 328-332 : ill

Abrasive wear resistance of powder composites at AEW and AIWKulu, Priit; Veinthal, Renno; Käerdi, Helmo; Tarbe, Riho17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 62

Abrasivity study of materials used at abrasive testsKulu, Priit; Veinthal, Renno; Käerdi, Helmo; Tarbe, RihoTribology 2008 : proceedings of the 9th International Tribology Conference : University of Pretoria, South Africa, 2-4 April 20082008 / p. 3.4(1)-3.4(10)

Advanced multifunctional materials and their applicationsAntonov, Maksim; Hussainova, Irina; Kers, Jaan; Kulu, Priit; Kübarsepp, Jakob; Veinthal, RennoResearch in Estonia : present and future2011 / p. 146-167

Akadeemiline sullerlus kui akadeemilise vabaduse kuritarvitamineSoomere, Tarmo; Veinthal, RennoSirp2016 / lk. 36-37 : ill https://artiklid.elnet.ee/record=b2757309*est https://www.sirp.ee/s1-artiklid/c21-teadus/akadeemiline-sullerlus-kui-akadeemilise-vabaduse-kuritarvitamine/

Aluminum based composite by novelty process : Repetitive Press Roll Bonding (RPRB)Pramono, Agus; Kollo, Lauri; Veinthal, RennoProcedia chemistry2015 / p. 473-479 : ill http://dx.doi.org/10.1016/j.proche.2015.12.081

Characterisation and modelling of erosion wear of powder composite materials and coatingsKulu, Priit; Veinthal, Renno; Käerdi, HelmoInternational journal of materials & product technology2007 / 3/4, p. 425-447 : ill

Characterization and modelling of erosion wear of powder composite materials and coatingsVeinthal, Renno2005 https://www.ester.ee/record=b2097488*est

Characterization and prediction of abrasive wear of powder composite materialsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoProceedings of Nordtrib 2008 : 13th Nordic Symposium on Tribology : Tampere, Finland, 10-13 June, 20082008 / ? p

Characterization and prediction of abrasive wear of powder composite materialsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoWear2009 / p. 2216-2222 : ill

Characterization of powdermetal matrix composites for erosion wear applicationsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoExtended abstracts of 2006 Powder Metallurgy World Congress : Busan, Korea, September 24-28. 22006 / p. 1056

Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings [Electronic resource]Kulu, Priit; Veinthal, RennoProceedings of XIIth International Conference on Composites/Nano Engineering : ICCE-12 : Tenerife, Spain2005 / ? p. [CD-ROM]

Characterization of the structure and properties of composite powder materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoMaterials science = Medžiagotyra2005 / 4, p. 376-380 : ill

Coatings and surface engineering. Industry oriented researchVeinthal, Renno; Kulu, Priit; Zikin, Arkadi; Sarjas, Heikki; Antonov, Maksim; Podgurski, Vitali; Adoberg, EronEstonian journal of engineering2012 / p. 176-184 : ill https://kirj.ee/public/Engineering/2012/issue_3/Eng-2012-3-176-184.pdf

Cold metal transfer (CMT) welding of thin sheet metal productsTalalaev, Robert; Veinthal, Renno; Laansoo, Andres; Sarkans, MartinšEstonian journal of engineering2012 / p. 243-250 : ill

Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methodsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Toropov, Stanislav; Veinthal, Renno; Surženkov, AndreiProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [II]2010 / p. 474-479

Comparison of the wear and frictional properties of Cu matrix composites prepared by pulsed electric current sinteringRitasalo, Riina; Antonov, Maksim; Veinthal, Renno; Hannula, Simo-PekkaProceedings of the Estonian Academy of Sciences2014 / p. 62-74 : ill https://artiklid.elnet.ee/record=b2665219*est https://doi.org/10.3176/proc.2014.1.09 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solutionLille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Reitsnik, Renno; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 680-687 : ill

Composition and structure of bimodal WC-Co materials related to mechanical properties and abrasive wearYung, Der-Liang; Antonov, Maksim; Hussainova, Irina; Veinthal, Renno; Hogmark, StureM2D2015 : proceedings of the 6th International Conference on Mechanics and Materials in Design, 20152015 / p. 655-664

Covalent coupling of ionic liquid to carbon nanotubes : preparation and tribological propertiesTaaber, Triinu; Põhako-Esko, Kaija; Antonov, Maksim; Veinthal, RennoMaterials Research Society symposium proceedings2014 / p. UU06-30 : ill https://doi.org/10.1557/opl.2014.539 Conference proceedings at Scopus Article at Scopus

Description of punch wear mechanism during fine blanking processLind, Liina; Peetsalu, Priidu; Põdra, Priit; Adoberg, Eron; Veinthal, Renno; Kulu, PriitProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [II]2010 / p. 504-509 : ill

Determination of mechanical properties of thin hard coatings using nanoindentationYaldiz, Can Emrah; Veinthal, Renno; Gregor, Andre; Georgiadis, Kyriakos18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 48

Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrateLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorMaterials science = Medžiagotyra2012 / p. 51-56 : ill https://www.researchgate.net/publication/266348938_Determination_of_Modulus_of_Elasticity_Nanohardness_and_Residual_Stresses_in_Brush-plated_Gold_and_Silver_Coatings_on_Copper_Substrate

Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling methodRyabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, RennoMaterials science forum2011 / p. 171-176

Diffusionsschweissen von Werkstoffen mit unterschiedlichen Eigenschaften = Diffusion welding of different materials = Erinevate materjalide difusioonkeevitusDahms, Steffen2011 https://digi.lib.ttu.ee/i/?605

Digipööre ja 10 "eluaegset professorit"Veinthal, RennoMente et Manu2017 / lk. 16-18 : fot https://www.ttu.ee/public/m/mente-et-manu/MM_03_2017/mobile/index.html#p=1 https://artiklid.elnet.ee/record=b2820639*est

Digipööre TTÜsVeinthal, RennoPostimees2017 / lk. 20

Durability of complex shape punch in thick sheet metal fine-blankingVeinthal, Renno; Peetsalu, Priidu; Saarna, Mart; Talkop, AdolfEuropean Conference on Heat Treatment and 21st IFHTSE Congress : May, 12th-15th, 2014, Munich, Germany : proceedings2014 / p. 399-406 : ill

Effect of hot isostatic pressing on cellular lattice structures obtained by selective laser melting [Electronic resource]Holovenko, Yaroslav; Kollo, Lauri; Jõeleht, Marek; Pohlak, Meelis; Veinthal, RennoWorld PM2016 proceedings2016 / [USB]

Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase compositesHolovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani Ahranjani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, RennoInternational journal of refractory metals and hard materials2020 / art. 105087, 10 p. : ill https://doi.org/10.1016/j.ijrmhm.2019.105087 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of oxidation on erosive wear behaviour of boiler steelsAntonov, Maksim; Veinthal, Renno; Huttunen-Saarivirta, E.; Hussainova, Irina; Vallikivi, Ahto; Lelis, Martynas; Priss, JelenaTribology international2013 / p. 35-44 : ill https://doi.org/10.1016/j.triboint.2012.09.011 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of temperature and load on three-body abrasion of cermets and steelAntonov, Maksim; Hussainova, Irina; Veinthal, Renno; Pirso, JüriTribology international2012 / p. 261-268 : ill https://www.sciencedirect.com/science/article/pii/S0301679X11002015

Effect of temperature on erosive and abrasive wear of carbide reinforced powder steelsVeinthal, Renno; Antonov, MaksimTribology 2011 : proceedings of the 10th International Tribology Conference, Pretoria, South Africa, 5-7 April 20112011 / p. 104-111 : ill

Engineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 http://dx.doi.org/10.4028/www.scientific.net/KEM.674

Environmentally assisted abrasive erosive wear of metals matrix composites [Electronic resource]Veinthal, Renno; Kulu, Priit; Aulik, Allan; Siitonen, P.Conference on PM and Advanced Materials and Materials Technology Innovation : 27.-28.02.2005, Tampere, Finland2005 / ? p. [CD-ROM]

Erosion and impact wear resistance of thermal sprayed coatingsKulu, Priit; Tarbe, Riho; Veinthal, RennoSurface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria2007 / p. 94-99 : ill

Erosion and impact wear resistance of thermal sprayed coatings [Electronic resource]Kulu, Priit; Tarbe, Riho; Veinthal, RennoProceedings of 15th IFHTSE and 20 SMT Congress : September 2006, Vienna2006 / [CD-ROM]

Erosion wear of PM materials and coatings : prediction and controlVeinthal, Renno; Kulu, Priit; Käerdi, Helmo17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 52-53

Erosion-oxidation of pressure vessel steel P265GHHuttunen-Saarivirta, E.; Kuokkala, V.-T.; Antonov, Maksim; Veinthal, Renno; Tuiremo, J.; Mäkelä, K.Tribologia : Finnish journal of tribology2012 / p. 11-19 : ill https://journal.fi/tribologia/article/view/69337

Erosive wear resistance of HVOF sprayed coatingsKulu, Priit; Veinthal, Renno; Zimakov, SergeiEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 64-65

Estonian education system and the influence of digitalization : welcome addressVeinthal, RennoManagement Education for a Digital World : proceedings of the 24th CEEMAN Annual Conference : 28-30 September 2016, Tallinn, Estonia2016 / p. 8-9 : portr

Evolution of microstructure and properties in Ti-alloys during rapid electrocontact heating with SPDKommel, Lembit; Peetsalu, Priidu; Veinthal, RennoMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 62-66 : ill https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10934528/

Fabrication and microstructural analysis of didymium-iron-boron magnet alloys with cerium additionsMural, Zorjana; Kolnes, Märt; Afshari, Hossein; Kollo, Lauri; Link, Joosep; Veinthal, RennoProceedings of the Estonian Academy of Sciences2016 / p. 166-171 : ill https://doi.org/10.3176/proc.2016.2.02 https://artiklid.elnet.ee/record=b2768229*est Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Fabrication, control and properties of nanocrystalline copperKommel, Lembit; Kübarsepp, Jakob; Veinthal, Renno; Traksmaa, RainerNano-architectured and nanostructured materials : fabrication, control and properties2004 / p. 27-37 : ill

Fracture toughness of ceramics fired at different temperaturesSin, Peter; Veinthal, Renno; Sergejev, Fjodor; Antonov, Maksim; Stubna, IgorMaterials science = Medžiagotyra2012 / p. 90-92 : ill https://www.researchgate.net/publication/268257498_Fracture_Toughness_of_Ceramics_Fired_at_Different_Temperatures

Friction and wear of fiber reinforced polyimide compositesZhao, Gai; Hussainova, Irina; Antonov, Maksim; Wang, Qihua; Wang, Tingmei; Veinthal, Renno19th International Conference on Wear of Materials : Portland, Oregon, USA, 14-18 April 2013 : conference abstracts2013 / [p. 92]

Heat treatment of ultrafine grained AA6061 consolidation by equal channel angular pressingPramono, Agus; Kollo, Lauri; Kallip, Kaspar; Veinthal, Renno; Gomon, Jaana-KateriinaInstrumentation and measurement systems2015 / p. 252-256 http://dx.doi.org/10.4028/www.scientific.net/AMM.771.252

Heat treatment of ultrafine grained high-strength aluminum alloyPramono, Agus; Kollo, Lauri; Kallip, Kaspar; Veinthal, Renno; Gomon, Jaana-KateriinaEngineering materials & tribology XXII2014 / p. 273-276 : ill https://doi.org/10.4028/www.scientific.net/KEM.604.273 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

High-energy ball milling of Nd-Fe-B powdersMural, Zorjana; Kollo, Lauri; Kallip, Kaspar; Traksmaa, Rainer; Veinthal, RennoProceedings of the Applied Magnetic Materials 2013 Conference2013 / p. 12-16 : ill

High-strength aluminum alloy of ultrafine grained by consolidation-ECAPPramono, Agus; Kollo, Lauri; Kommel, Lembit; Veinthal, RennoIOP conference series : materials science and engineering2019 / art. 012035, 7 p. : ill https://doi.org/10.1088/1757-899X/478/1/012035 Conference proceedings at Scopus Article at Scopus Article at WOS

Hot and cold of pressing effect on ECAP-parallel channel composite based on Al/ANF materialPramono, Agus; Kommel, Lembit; Kollo, Lauri; Veinthal, RennoAdvanced materials research2015 / p. 343-347 http://dx.doi.org/10.4028/www.scientific.net/AMR.1123.343

Hot and cold regions during accumulative roll bonding of Al/Al2O3 nanofibre compositesPramono, Agus; Kollo, Lauri; Veinthal, RennoProceedings of the Estonian Academy of Sciences2016 / p. 132-137 : ill https://artiklid.elnet.ee/record=b2768216*est https://doi.org/10.3176/proc.2016.2.12 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Impact erosive wear resistance of thermal sprayed WC-Co coatingsKulu, Priit; Zimakov, Sergei; Veinthal, RennoMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 187-192 : ill

Impact wear performance of thin hard coatings on TiC cermetsVeinthal, Renno; Sergejev, Fjodor; Yaldiz, Can Emrah; Mikli, ValdekJournal of ASTM International2011 / [10] p

Impact wear performance of thin hard coatings on TiC cermetsVeinthal, Renno; Sergejev, Fjodor; Yaldiz, Can Emrah; Mikli, Valdek18th IFHTSE Congress : 2010 July 26th to 30th, Rio de Janeiro, Brazil2010 / p. 5046-5056 : ill. [CD-ROM]

Indentation hardness as a tool for powder coating characterizationVeinthal, RennoEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 40

Industry 4.0 kolis internettiTööstusEST2020 / lk. 8-10 https://issuu.com/meediapilt/docs/toostusest_mai_2020 https://toostusest.ee/uudis/2020/05/20/konverents-industry-4-0-kolis-internetti/ http://www.ester.ee/record=b4481084*est

Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite nACo coating during running-inSurženkov, Andrei; Podgurski, Vitali; Viljus, Mart; Adoberg, Eron; Nanits, Mats-Maidu; Kulu, Priit; Veinthal, RennoMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 26

Influence of particle impact conditions and temperature on erosion–oxidation of steels at elevated temperaturesHuttunen-Saarivirta, E.; Antonov, Maksim; Veinthal, Renno; Tuiremo, J.; Mäkelä, K.; Siitonen, P.Wear2011 / p. 159-175 : ill

Influence of pretreatment of substrate surface on residual stresses in different cold spray coatingsRjabtšikov, Aleksander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, RennoMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 23

Influence of SPD on structure and properties of copperKommel, Lembit; Kenk, Kalju; Veinthal, RennoProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 161-164 : ill

Influence of surface roughness on the tribological behaviour of the PVD coatingsSurženkov, Andrei; Adoberg, Eron; Viljus, Mart; Podgurski, Vitali; Veinthal, Renno; Kulu, Priit; Gregor, Andre18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 38

Inimesed ja ideed peavad liikumaVeinthal, RennoÄripäev2018 / lk. 12

Inseneriakadeemia ellukutsumise vajadusest - nutikale Eestile annavad sisu inseneridVeinthal, RennoEesti Masinatööstuse Liit. TTÜ mehaanika ja tööstustehnika instituut 852021 / lk. 49-52 : ill

Insenerid (inseneriteadused) Eesti ühiskonna teenistuses : ettekanne "Insenerid Eesti ühiskonna teenistuses" Tallinna Teadlaste Maja konverentsil "Eesti rahvuse kestmisest" 11.11.2017Veinthal, RennoEesti rahvuse kestmisest : Tallinna Teadlaste Maja, 19.11.2016 ja 11.11.2017 konverentside kogumik : Eesti Vabariigi 100. aastapäevaks2018 / lk. 118-128 http://www.ester.ee/record=b4778435*est

Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Reitsnik, Renno; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorEngineering materials and tribology2013 / p. 125-130 : ill

Investigation of (Ti, Al)N based coatings grown by physical vapor depositionPodgurski, Vitali; Torp, Bo; Traksmaa, Rainer; Veinthal, Renno; Viljus, Mart; Coddet, Olivier; Morstein, Marcus; Gregor, Andre; Kulu, PriitMaterials science = Medžiagotyra2005 / 4, p. 352-355 : ill https://www.researchgate.net/publication/237812860_Investigation_of_Ti_AlN_Based_Coatings_Grown_by_Physical_Vapor_Deposition

Jet milling of the powders for Nd-Fe-B sintered magnetsMural, Zorjana; Kollo, Lauri; Veinthal, Renno2014 International Conference on NdFeB Magnets : Supply Chain, Critical Properties, & Applications : proceedings : March 2-5th, 2014, New Century Grand Hotel Ningbo2014 / p. 180-183 : ill

Joining of CrNi steel and AlMg alloy without interlayersDahms, Steffen; Kulu, Priit; Veinthal, Renno; Basler, UrsulaEstonian journal of engineering2010 / 4, p. 273-284 : ill

KatsekodaVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20042005 / lk. 218-219

KatsekodaVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20062007 / lk. 275

KatsekodaVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20052006 / lk. 298-299

KatsekodaVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20072008 / lk. 295-296

Katsekoja mõõtelabor sai nüüdisaegset tehnikatVeinthal, RennoMente et Manu2005 / 26. jaan., lk. 1 https://www.ester.ee/record=b1242496*est

Kes tulid TTÜsse õppima? Aga kes ei tulnud?Veinthal, Renno; Voll, HendrikMente et Manu2017 / lk. 18-21 : ill https://www.ttu.ee/public/m/mente-et-manu/MM_05_2017/mobile/index.html https://artiklid.elnet.ee/record=b2827001*est

Kolm küsimust doktoriõppe süsteemi kohtaKirm, Marco; Veinthal, Renno; Niglas, Katrin; Jaakma, ÜlleSirp2016 / lk. 36-37 http://www.sirp.ee/s1-artiklid/c21-teadus/kolm-kusimust-doktorioppe-susteemi-kohta/

Komisjon soovitab sel aastal teadusraha taotlusvoorus muudatusi mitte teha [Võrguväljaanne]Himma, Marjunovaator.err.ee2019 / fot Komisjon soovitab sel aastal teadusraha taotlusvoorus muudatusi mitte teha

Komposiitmaterjalid : täienduskursus : november 2007 - jaanuar 2008Veinthal, Renno2008 https://www.ester.ee/record=b4652765*est

Kuidas hoiduda arengulõksust?Veinthal, Renno; Lopp, Margus; Kattel, Rainer; Öpik, Andres; Kamratov, ArdoMente et Manu2014 / lk. 4-7 : fot https://www.ester.ee/record=b1242496*est

Mapping of impact-abrasive wear performance of WC-Co cemented carbidesAntonov, Maksim; Veinthal, Renno; Yung, Der-Liang; Katušin, Dmitri; Hussainova, IrinaWear2015 / p. 971-978 : ill https://doi.org/10.1016/j.wear.2015.02.031 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Materjalitehnika : õpik kõrgkoolidele. 1Kulu, Priit; Kübarsepp, Jakob; Laansoo, Andres; Veinthal, Renno2015 https://www.ester.ee/record=b4459279*est https://digikogu.taltech.ee/et/Item/c783c117-2ac8-4a7a-8417-21c90918ed51

Materjalitehnika : õpik kõrgkoolidele. 2Kulu, Priit; Kübarsepp, Jakob; Laansoo, Andres; Veinthal, Renno2015 https://www.ester.ee/record=b4459287*est https://digikogu.taltech.ee/et/Item/4ab40e78-b578-4dcc-aa3e-6516e8fa33c9

Materjalitehnika instituudi teadustegevus : kaasaegsed multifunktsionaalsed materjalid ja nende rakendusedVeinthal, RennoTTÜ mehaanikateaduskond. Eesti Masinatööstuse Liit2011 / lk. 43-52 : ill., fot http://www.ester.ee/record=b2720689*est

Materjalitehnika Ühingu seminar Tartu Ülikooli Füüsikainstituudis : [7. apr. 2004]Veinthal, RennoMente et Manu2004 / 27. apr., lk. 2 https://www.ester.ee/record=b1242496*est

Materjaliõpetuse praktikumide ja kodutööde juhendid2010 https://www.ester.ee/record=b2624752*est https://digikogu.taltech.ee/et/Item/5315a9bb-9e25-400a-89c3-9d0f1c3f03f7

Measurement and relaxation observation of residual stresses in brush-plated gold coating depending on the current densityLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, Valdek18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 50

Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plateLille, Harri; Kõo, Jakub; Valgur, Jaak; Ryabchikov, Alexander; Reitsnik, Renno; Veinthal, RennoInternational Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on Residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany Materials science forum2014 / p. 101-106 https://doi.org/10.4028/www.scientific.net/MSF.768-769.101 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Mechanical properties of thin hard coatings on TiC-NiMo substratesYaldiz, Can Emrah; Veinthal, Renno; Gregor, Andre; Georgiadis, KyriakosEstonian journal of engineering2009 / 4, p. 329-339 : ill

Mechanism of abrasion-erosion wear of thermal sprayed coatingsKulu, Priit; Veinthal, Renno; Kõo, Jakub; Lille, HarriAdvances in mechanical behaviour, plasticity and damage : proceedings of EUROMAT 2000. Volume 12000 / p. 651-656 : ill

Mehaanikainseneri käsiraamat2015

Mehaanikainseneri käsiraamat2013 https://www.ester.ee/record=b3007631*est

Mehanical properties of PVD coatings on TiC-based cermetsVeinthal, Renno; Yaldiz, Can Emrah; Gregor, Andre1st Mediterranean Conference on Heat Treatment and Surface Engineering : Heat Treatment and Surface Engineering in the Manufacturing of Metallic Engineering Components : December 1-3, 2009, Sharm El-Skeikh, Egypt2009 / p. 54

Mehhanotehnika ja metallide käsiraamat2012 http://www.ester.ee/record=b2860365*est

Metallid 3D-sseVeinthal, Renno; Kollo, Lauri; Pohlak, MeelisÄripäev2015 / Tööstus, lk. 36-38

Metalliõpetus ja metallide tehnoloogia. IV, Mehaanilised omadused ja teimimine. Mittepurustav kontroll : eesti-inglise-saksa-vene terminid ja määratlused2001 http://www.ester.ee/record=b1540220*est

Metallmaatrikskomposiitmaterjalid triboloogias : avalik loeng 3. mail 2007 TTÜsVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20072008 / lk. 326-331 : ill

Metallobjektide 3D-printimine - uued võimalused ja väljakutsedPohlak, Meelis; Veinthal, RennoEesti Päevaleht2015 / Metallileht, lk. 2

Methodology for configuration of robot welding cell for SMEs under conditions of small and medium sized production using MIG/MAG processTalalaev, Robert; Sarkans, Martinš; Laansoo, Andres; Veinthal, RennoProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 591-596 : ill

Micromechanical properties and wear resistance of powder coatingsVeinthal, Renno; Zimakov, Sergei; Kulu, PriitProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 216-219 : ill

Microstructural aspects of abrasive wear of composite powder materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoInternational journal of materials & product technology2011 / p. 92-119 : ill

Miks ei edene doktoriõpingud?Veinthal, RennoMente et Manu2016 / lk. 4-6 : fot https://artiklid.elnet.ee/record=b2758758*est

Modeling of erosion wear of powder composite materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoSurface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria2007 / p. 129-132 : ill

Modelling of abrasive wear and prognostication of erosion resistance of powder materials and coatingsKulu, Priit; Veinthal, Renno; Käerdi, HelmoInternational Conference HighMatTech : October 15-19, 2007, Kiev, Ukraine : proceedings of conference2007 / p. 472

Modelling of erosion wear of powder composite materials and coatings [Electronic resource]Veinthal, Renno; Kulu, PriitProceedings of 15th IFHTSE and 20 SMT Congress : September 2006, Vienna2006 / [CD-ROM]

Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidationKollo, Lauri; Bradbury, Christopher R.; Veinthal, Renno; Jäggi, Christian; Carreno-Morelli, Efrain; Leparoux, MarcMaterials science and engineering : A2011 / p. 6606-6615 : ill

NeTTUN project : how to increase the lifetime of TBM drag bits?Fridrici, V.; Antonov, Maksim; Katušin, Dmitri; Yung, Der-Liang; Veinthal, Renno; Hussainova, Irina2nd Eastern European Tunnelling Conference "Tunneling in a Challenging Environment", Making tunneling business in difficult times : EETC 2014, Athens, Greece, 28 September - 1 October 20142014

New high frequency surface fatigue wear tester : design and first resultsAntonov, Maksim; Kulu, Priit; Sergejev, Fjodor; Hussainova, Irina; Veinthal, RennoProceedings of Nordtrib 2008 : 13th Nordic Symposium on Tribology : Tampere, Finland, 10-13 June, 20082008 / p. NT2008-87-24 https://www.researchgate.net/publication/288482524_New_high_frequency_surface_fatigue_wear_tester_Design_and_first_results

Nutikas spetsialiseerumine ja selle kolm vaala : [teemat kommenteerivad Enn Saar, Renno Veinthal, jt.]Saar, Enn; Veinthal, RennoInseneeria2013 / lk. 14-18 : ill https://artiklid.elnet.ee/record=b2654800*est

On the describing of the stress-relaxation processKenk, Kalju; Veinthal, RennoInternational Symposium on Machine Design OST 2001 : [Tallinn, Estonia, October 4-5, 2001] : abstracts2001 / [1] p

Optimization of structure of sprayed WC-Co hardmetal based coatingsZimakov, Sergei; Tarbe, Riho; Veinthal, Renno; Kulu, PriitProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 224-227 : ill

Prediction of erosive wear of powder materials with hardmetal-type structureVeinthal, Renno; Käerdi, Helmo; Kulu, PriitThe 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) Congress, Brisbane, Australia, 30.10-02.11.20072008 / ? p

Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitridingHolovenko, Yaroslav; Kollo, Lauri; Jõeleht, Marek; Ivanov, Roman; Soloviova, Tetiana; Veinthal, RennoProceedings of the Estonian Academy of Sciences2019 / p. 131–139 : ill https://doi.org/10.3176/proc.2019.2.02 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-131-139.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Production of superhard carbon rich boron carbon (B11.72C3.28) based composite in the B4C-Al-WC-Co-Cu system through SHS and SPS techniques [Electronic resource]Kommel, Lembit; Tarraste, Marek; Kolnes, Märt; Veinthal, Renno; Kübarsepp, JakobEuro PM2015 Congress & Exibition : proceedings : 4-7 October 2015, Reims Congress Centre, Reims, France2015 / [6] p. : ill. [USB]

Professorite ja juhtivteadurite atseteerimise tulemustest ja esimeste tenuuri ametikohtade täitmisestVeinthal, Renno; Trahov, TeaMente et Manu2017 / lk. 26-27 : fot https://www.ttu.ee/public/m/mente-et-manu/MM_05_2017/mobile/index.html https://artiklid.elnet.ee/record=b2827006*est

Pultruding of metal powder filled glass fiber reinforced polymer compositesRummo, Henri; Veinthal, Renno; Aruniit, AareEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 48-53 : ill https://doi.org/10.4028/www.scientific.net/KEM.674.48 Conference Proceedings at Scopus Article at Scopus

Punch lifetime in fine-blanking with optimum combination of mechanical propertiesVeinthal, Renno; Peetsalu, Priidu; Saarna, Mart; Sergejev, FjodorEuropean Conference on Heat Treatment and 22nd IFHTSE Congress : Heat Treatment and Surface Engineering from tradition to innovation : Venice (Italy), 20-22 May 20152015 / [7] p

Quality assuarance system of metals testing laboratoryPäärsoo, Riho; Veinthal, RennoProceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia2000 / p. 313-315

Quality assurance in mechanical testing laboratory by participating in proficiency testPäärsoo, Riho; Veinthal, Renno; Peetsalu, Priidu; Saarna, MartProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 242-244 : ill

Quo vadis, tenuur?Veinthal, Renno; Trahov, TeaMente et Manu2018 / lk. 30-33 : ill http://www.ester.ee/record=b1242496*est http://dea.digar.ee/publication/AKmenteetmanu https://taltech.ee/avalehekulg/?id=10641&category=128006#newsTabsMenu https://artiklid.elnet.ee/record=b2866971*est

Rakendusteadusest ja teaduse rakendamisestVeinthal, Renno; Lukas, MatiMente et Manu2019 / lk. 4-6 : ill https://taltech.ee/rakendusteadusest-ja-teaduse-rakendamisest https://www.ester.ee/record=b1242496*est https://www.ttu.ee/public/m/mente-et-manu/MM_02_2019/mobile/index.html

Rakendusuuringud materjalitehnoloogia valdkonnas : [ettekanne mehaanikainseneride päeval 27. septembril 2013 TTÜs]Veinthal, RennoTallinna Tehnikaülikooli aastaraamat 20132014 / lk. 194-204 : ill

Raudteel keeb teras : [8. okt. viisid EVR Koehne AS töömehed läbi raudteerööbaste demonstratsioonkeevituse, järgnes katsetamine TTÜ Katsekoja mehaanikalaboris]Veinthal, RennoMente et Manu2002 / 22. okt., lk. 4 : fot https://www.ester.ee/record=b1242496*est

Recycled hardmetal-based powder composite coatings : optimisation of composition, structure and propertiesKulu, Priit; Käerdi, Helmo; Surženkov, Andrei; Tarbe, Riho; Veinthal, Renno; Goljandin, Dmitri; Zikin, ArkadiInternational journal of materials & product technology2014 / p. 180-202 : ill https://doi.org/10.1504/IJMPT.2014.064038 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Regression models and fuzzy logic prediction of TBM penetration rateVu, Trieu Minh; Katušin, Dmitri; Antonov, Maksim; Veinthal, RennoOpen engineering2017 / p. 60-68 : ill https://doi.org/10.1515/eng-2017-0012 Journal metrics at Scopus Article at Scopus

Rektori luba mehaanikute tammepuuleVeinthal, RennoMente et Manu2018 / lk. 31 http://www.ester.ee/record=b1242496*est http://dea.digar.ee/publication/AKmenteetmanu

Renno Veinthal : tehnikaülikooli teadustöö viljakus on suurenenud [Võrguväljaanne]Veinthal, Rennoerr.ee2020 / fot Renno Veinthal: tehnikaülikooli teadustöö viljakus on suurenenud Vaata ka: Ago Samoson: Eesti teadus surmahirmus (err.ee 29.04.2020)

Renno Veinthal: rohkem suurepärast teadust, arvestades Eesti vajadusi  [Võrguväljaanne]Veinthal, Rennoerr.ee2019 "Renno Veinthal: rohkem suurepärast teadust, arvestades Eesti vajadusi"

Research activities in materials engineering and tribology at TUTKulu, Priit; Veinthal, Renno; Kübarsepp, Jakob18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 15

Residual stresses and their relaxation in brush-plated gold and silver coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, ValdekMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 39

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoAbstracts of 10th Nordic Symposium on Tribology NORDTRIB2002 / p. 163

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoAbstracts of International Conference Materials Engineering and Tribology2002 / p. 38

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoMedžiagotyra = Materials science2002 / 4, p. 425-429 : ill

Selection criteria for abrasive erosion wear resistant powder coatings [Electronic resource]Kulu, Priit; Veinthal, RennoProceedings of 10th Nordic Symposium on Tribology NORDTRIB2002 / [CD-ROM]

Solid particle erosion of thermal sprayed coatingsKulu, Priit; Hussainova, Irina; Veinthal, RennoWear2005 / 1/4, p. 488-496 : ill

Spark plasma sintered Nd-Fe-B magnets from high-energy ball milled powdersMural, Zorjana; Kollo, Lauri; Veinthal, RennoThe 24th International Workshop on Rare-Earth and Future Permanent Magnets and Their Applications (REPM 16) : 28 August - 1 September 2016, Darmstadt, Germany2016 / p. 619-623

Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformationKommel, Lembit; Hussainova, Irina; Veinthal, Renno; Saarna, MartUltrafine Grained Materials - from Basics to Applications : UFG-2006 : September 25-27, 2006, Kloster Irsee, Germany2006 / p. 3-17 - 3-19

Structure and magnetic properties of NdFeB powder prepared by hydrogen decrepitation and high-energy ball millingMural, Zorjana; Kollo, Lauri; Traksmaa, Rainer; Kallip, Kaspar; Link, Joosep; Veinthal, RennoEngineering materials & tribology XXII2014 / p. 262-266 https://doi.org/10.4028/www.scientific.net/KEM.604.262 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Study of properties of HVOF-sprayed coatingsKulu, Priit; Ojaviir, Marek; Veinthal, RennoProceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia2000 / p. 214-217 : ill

Study of surface fatigue of wear resistant powder materialsSaarna, Mart; Kulu, Priit; Veinthal, Renno; Tarbe, Riho15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 66-68 : ill

Study of surface fatique of wear resistant powder metallurgical materialsSaarna, Mart; Kulu, Priit; Veinthal, Renno; Tarbe, RihoProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 377-387 : ill

Study of the ultrafine-grains intrinsic nanostructure refinement by severe plastic deformation of copper alloysKommel, Lembit; Veinthal, Renno; Mikli, Valdek; Dedov, AndreiOAS 2015 : proceedings of the 3nd [i.e. 3rd] International Conference Optimization and Analysis of Structures III : Tartu, Estonia, August 23-25, 20152015 / p. 28-32 : ill

Substance-to-substance joining to quartz glassDahms, Steffen; Kulu, Priit; Veinthal, Renno; Basler, Ursula; Sändig, SabineEstonian journal of engineering2009 / 2, p. 131-142 : ill

Surface fatique processes at impact wear of powder materialsKulu, Priit; Veinthal, Renno; Saarna, Mart; Tarbe, RihoWear2007 / 1, p. 463-471 : ill

Surface fatique processes at impact wear of powder materialsKulu, Priit; Veinthal, Renno; Saarna, Mart; Tarbe, RihoWOM : 16th International Conference on Wear of Materials : Montreal, Quebec, Canada, April 15-19, 2007 : delegate manual2007 / p. 17D.1 https://www.sciencedirect.com/science/article/pii/S0043164807003894

Tallinn University of Technology : annual report 2004Keevallik, Andres; Aviksoo, Kai; Nirk, Tiit; Neudorf, Reet; Parre, Kiira; Järs, Jüri; Veinthal, Renno; Palm, Enrico; Laur, Toomas; Pihel, Mare; Põder, Ülle; Toompuu, Katrin; Murumets, Urmas; Järva, Rein; Krispin, Madli; Johannes, Anu; Pällo, Arnel; Orulaid, Kerly; Lill, Heino; Pihlamägi, Olavi2005 http://www.ester.ee/record=b1968466*est

Tallinna Tehnikaülikool aastal 2004Keevallik, Andres; Aviksoo, Kai; Arumaa, Helgi; Nirk, Tiit; Neudorf, Reet; Parre, Kiira; Järs, Jüri; Veinthal, Renno; Palm, Enrico; Pihel, Mare; Põder, Ülle; Toompuu, Katrin; Murumets, Urmas; Järva, Rein; Krispin, Madli; Johannes, Anu; Pällo, Arnel; Orulaid, Kerly; Lill, Heino; Pihlamägi, Olavi2005 http://www.ester.ee/record=b1558944*est

Technology and properties of fine-grained Nd-Fe-B magnets = Nd-Fe-B peenteramagnetite tehnoloogia ja omadusedMural, Zorjana2017 https://digi.lib.ttu.ee/i/?7275 https://www.ester.ee/record=b4665012*est

Tee maailmatasemel tippspetsialistiks : [ka TTÜ teadusprorektor Renno Veinthali kommentaarid]Maidla, MargusSirp2016 / lk. 34-35 : ill http://www.sirp.ee/s1-artiklid/c21-teadus/tee-maailmatasemel-tippspetsialistiks/

Tenuur kui akadeemilise vabaduse tagatisAaviksoo, Jaak; Veinthal, RennoSirp2016 / lk. 15-16 : ill http://www.sirp.ee/s1-artiklid/c21-teadus/tenuur-kui-akadeemilise-vabaduse-tagatis/

Tenuurist ja akadeemilise hindamise vajalikkusestVeinthal, RennoMente et Manu2017 / lk. 42-45 : fot https://www.ttu.ee/public/m/mente-et-manu/MM_02_2017/index.html https://artiklid.elnet.ee/record=b2816038*est

The aluminum based composite produced by Self propagating High temperature SynthesisPramono, Agus; Kommel, Lembit; Kollo, Lauri; Veinthal, RennoMaterials science = Medžiagotyra2016 / p. 41-43 : ill https://doi.org/10.5755/j01.ms.22.1.7500 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

The copper structure and properties evolution in zone of severe plastic deformationKommel, Lembit; Kenk, Kalju; Veinthal, RennoMedžiagotyra = Materials science2002 / 4, p. 396-398 : ill

The copper structure and properties evolution in zone of severe plastic deformationKommel, Lembit; Kenk, Kalju; Veinthal, RennoAbstracts of International Conference Materials Engineering and Tribology2002 / p. 19

The effect of nano-TiC addition on sintered Nd-Fe-B permanent magnetsMural, Zorjana; Kollo, Lauri; Xia, Manlong; Veinthal, RennoJournal of magnetism and magnetic materials2017 / p. 23-28 : ill https://doi.org/10.1016/j.jmmm.2016.12.115 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

The formation of structure and change of properties during heat treatment of boron carbide cermetsKommel, Lembit; Veinthal, Renno; Kimmari, EduardAbstracts of International Conference Materials Engineering and Tribology2002 / p. 56

The formation of structure and change of properties during heat treatment of boron carbide compositesKommel, Lembit; Veinthal, Renno; Kimmari, EduardMaterials science = Medžiagotyra2003 / 1, p. 99-101 : ill

The investigation of advanced constructional materials and manufacturing technologiesKommel, Lembit; Veinthal, RennoMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 41-45 : ill

3D printed metal and metal-ceramic cellular lattice structures for wear and thermoacoustic applications = 3D prinditud metall- ja metall-keraamilised kärgvõre struktuurid triboloogilistele- ja termoakustilistele rakendusteleHolovenko, Yaroslav2019 https://digi.lib.ttu.ee/i/?12289

Tribological properties of PVD coatings with lubricating filmsLind, Liina; Adoberg, Eron; Aarik, Lauri; Kulu, Priit; Veinthal, Renno; Abdel Aal, AlsayedEstonian journal of engineering2012 / p. 193-201 : ill

Triboloogia-alasest tegevusest materjalitehnika instituudisVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20092010 / lk. 29-31

TTÜ aastal 2020 : töögrupi visioonAav, Riina; Ellmann, Artu; Karilaid, Ivo; Kattel, Rainer; Lõugas, Tiina; Petlenkov, Eduard; Veinthal, Renno; Valgma, IngoMente et Manu2009 / 16. veebr., lk. 3 : fot https://www.ester.ee/record=b1242496*est

TTÜ auditi juht: salvestised ei loe, sõnad pandi suhuVeinthal, RennoPostimees2019 / lk. 1, 4-5 TTÜ auditijuht: salvestised ei loe, sõnad pandi suhu ja tõlgendusruumi on palju

TTÜ materjalitehnika instituudi koostöö ettevõtetegaVeinthal, RennoInseneeria2011 / lk. 15-17 : ill https://www.ester.ee/record=b1519314*est

TTÜ teadlased arendasid maailmas ainulaadse narkotestriMänniste, AgnesMente et Manu2017 / lk. 18-21 : fot http://www.ttu.ee/public/m/mente-et-manu/MM_01_2017/index.html https://artiklid.elnet.ee/record=b2811464*est

Tööstusdoktorantuur avab uusi võimalusi koostööks ja aitab ettevõtteil väärtusahelas tõustaVeinthal, RennoMente et Manu2017 / lk. 18-20 : fot http://www.ester.ee/record=b1242496*est https://artiklid.elnet.ee/record=b2830867*est

Uued inimesed ja positsioonidHints, Olle; Janno, Jaan; Uusen, Kaire; Oll, Sulev; Põdersalu, Heiko; Veinthal, Renno; Sooväli-Sepping, Helen; Chiesa, Matteo; Trahov, TeaMente et Manu2021 / lk. 42-47 : fot https://www.ester.ee/record=b1242496*est

Uued võimalused 3D-printimise valdkonnas - metallide printimine peagi võimalik ka EestisJõeleht, Marek; Kollo, Lauri; Pohlak, Meelis; Veinthal, RennoInseneeria2015 / lk. 32-35 : ill https://artiklid.elnet.ee/record=b2725592*est

Uuenduslik tootmine : käsiraamatRiives, Jüri; Lumiste, Rünno; Reedik, Vello; Roosimölder, Lembit; Karjust, Kristo; Kers, Jaan; Kiolein, Indrek; Kokla, Margo; Küttner, Rein; Lavin, Jaak; Lavrentjev, Jüri; Lõun, Kaia; Mõtus, Leo; Naams, Invar; Otto, Tauno; Pohlak, Meelis; Raba, Karl; Saks, Alo; Talkop, Adolf; Tähemaa, Toivo; Veinthal, Renno2011 http://www.ester.ee/record=b2736534*est

Uus "Akadeemilise karjääri korraldus" kasvatab ülikooli võimekustTrahov, Tea; Veinthal, RennoMente et Manu2018 / lk. 38-39 : fot https://ttu.ee/public/m/mente-et-manu/MM_02_2018/mobile/index.html#p=3 http://dea.digar.ee/publication/AKmenteetmanu http://www.ester.ee/record=b1242496*est https://artiklid.elnet.ee/record=b2862658*est

Uus teaduse teekaardi objekt toetab Tööstus 4.0 arenguidOtto, TaunoMente et Manu2017 / lk. 23-25 : ill http://www.ttu.ee/public/m/mente-et-manu/MM_01_2017/index.html https://artiklid.elnet.ee/record=b2811465*est

Uut katsetustehnikat mehaanikateaduskonnasVeinthal, Renno; Pohlak, MeelisMente et Manu2008 / 16. jaan., lk. 2 https://www.ester.ee/record=b1242496*est

Wear behaviour of doped WC–NI based hardmetals tested by four methodsYung, Der-Liang; Antonov, Maksim; Veinthal, Renno; Hussainova, IrinaWear2016 / p. 171-179 : ill https://doi.org/10.1016/j.wear.2016.02.015 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Wear of PVD coatings on fineblanking punches = PVD pinnete kulumine siselõikestantsi templitelLind, Liina2014 https://www.ester.ee/record=b4422007*est

Wear resistance of high velocity thermal sprayed coatingsKulu, Priit; Veinthal, Renno9th Nordic Symposium on Tribology NORDTRIB 2000 : Porvoo, Finland, 11-14 June 2000. Vol. 12000 / p. 87-95 : ill

Wear resistant powder coatings on the base of recycled hardmetalTarbe, Riho; Zimakov, Sergei; Mikli, Valdek; Kulu, Priit; Veinthal, RennoPowder metallurgy progress2005 / p. 148-157 : ill

Vickers hardness of ceramics fired at different temperaturesŠin, P.; Veinthal, Renno; Sergejev, Fjodor; Antonov, Maksim; Stubna, I.Young Researchers 2011, PhD Students, Young Scientists and Pedagogues Conference proceedings : Nitra, Slovakia, 21-22 September 20112011 / p. 565-570 https://www.researchgate.net/publication/265794312_Vickers_hardness_of_ceramics_fired_at_different_temperatures

Viscoplastic behavior of SPD copperKenk, Kalju; Kommel, Lembit; Veinthal, RennoEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 47-48

Ülikool hindamiskeerises : kuus teadusvaldkonda hästi hinnatudParre, KiiraMente et Manu2017 / lk. 28-31 https://www.ttu.ee/public/m/mente-et-manu/MM_05_2017/mobile/index.html https://artiklid.elnet.ee/record=b2827008*est

Ülikool viib firma väärtusahela tippuVeinthal, RennoÄripäev2017 / lk. 12 https://www.aripaev.ee/uudised/2017/11/15/ulikool-viib-firma-vaartusahela-tippu

Ülikooli akadeemiline arengukava seab kõrged sihid ja prioriteetsed valdkonnadMente et Manu2019 / lk. 22-25 : fot https://www.ester.ee/record=b1242496*est https://www.ttu.ee/public/m/mente-et-manu/MM_04_2019/mobile/index.html

Ülikoolide ja ettevõtete koostöö tooks tuluAru, ErikTööstusEST2019 / lk. 44-47 : fot http://www.ester.ee/record=b4481084*est https://toostusest.ee/uudis/2019/05/14/ulikoolide-ja-ettevotete-koostoo-tooks-tulu/