AC linear induction motor drives in industry automationLehtla, Tõnu; Teemets, RaivoAutomaatio 95 : automaatiopäivät - robotiikkapäivät, 3.-5.5.1995, Helsingin Messukeskus : esitelmät. 21995 / p. 680-685: ill Active learning electrical drives through social networkingVodovozov, Valery; Lehtla, Tõnu12th International Symposium "Topical Problems in the Field of Electrical and Power Engineering." Doctoral School of Energy and Geotechnology II : Kuressaare, Estonia, June 11-16, 20122012 / p. 12-19 : ill Active learning in remote electrical drive laboratoryVodovozov, Valery; Raud, Zoja; Lehtla, TõnuProceedings of 2015 IEEE Global Engineering Education Conference (EDUCON) : 18-20 March 2015, Tallinn University of Technology (TUT), Tallinn, Estonia2015 / p. 28-34 : ill https://doi.org/10.1109/EDUCON.2015.7095946 Actual Problems of Electrical Drives and Industry Automation : the research symposium of young scientists, Lohusalu, Estonia, June 1-8, 1997Lehtla, Tõnu1997 https://www.ester.ee/record=b1209789*est An approach to the modelling of electrical machinesLehtla, TõnuEPE'97 : 7th European Conference on Power Electronics and Applications, 8-10 September 1997, Trondheim, Norway : proceedings1997 / [5] p An improved interface converter for a medium-power wind-hydrogen systemVinnikov, Dmitri; Hõimoja, Hardi; Andrijanovitš, Anna; Roasto, Indrek; Lehtla, Tõnu; Klytta, Marius2nd International Conference on Clean Electrical Power Renewable Energy Resources Impact : Capri (Italy) June 9-11, 20092009 / p. 426-432 : ill Analysis of capacitor-related mid-voltage point shift problems in high-voltage half-bridge DC/DC convertersRoasto, Indrek; Vinnikov, Dmitri; Lehtla, TõnuProceedings of 2008 IEEE 39th Annual Power Electronics Specialists Conference : PESC 2008 : Rhodes, Greece, 15-19 June 20082008 / p. 3619-3622 Analysis of capacitor-related mid-voltage point shift problems in high-voltage half-bridge DC/DC convertersRoasto, Indrek; Vinnikov, Dmitri; Lehtla, TõnuPESC 08 : 39th IEEE Annual Power Electronics Specialists Conference : Rhodes, Greece, 15-19 June 2008 : book of one page paper summaries2008 / p. 573 Analytical and experimental investigation of neutral point clamped quasi-impedance-source inverterOtt, Silver; Roasto, Indrek; Vinnikov, Dmitri; Lehtla, TõnuScientific journal of Riga Technical University. Serija 4, Power and electrical engineering2011 / p. 113-118 : ill Andmevõrkudest automaatikasLehtla, Madis; Lehtla, TõnuElektriku kalender 19981997 / lk. 174-188 AnduridLehtla, Tõnu1996 https://www.ester.ee/record=b1054896*est Asünkroonajamite sagedusjuhtimineLaugis, Juhan; Lehtla, Tõnu1994 https://www.ester.ee/record=b1066871*est Automaatika [Võrguväljaanne]Lehtla, Tõnu; Rosin, Argo2001 http://www.ene.ttu.ee/elektriajamid/Leonardo/automaatika/index.html AutomaatjuhtimineTomson, Jaan; Lehtla, Tõnu1997 https://www.ester.ee/record=b1054899*est Compact design of a power circuit for a dual-output voltage converterVinnikov, Dmitri; Lehtla, TõnuBEC 2004 : proceedings of the 9th Biennial Baltic Electronics Conference : October 3-6, 2004, Tallinn, Estonia2004 / p. 333-336 : ill Comparative analysis of electric drives met for vehicle propulsionVodovozov, Valery; Raud, Zoja; Lehtla, Tõnu; Rassõlkin, Anton; Lillo, Nikolai9th International Conference on Ecological Vehicles and Renewable Energies EVER 20142014 / [8] p. : ill Comparison of different microcontroller development boards for power electronics applicationsRoasto, Indrek; Vinnikov, Dmitri; Lehtla, Tõnu5th International Symposium "Topical Problems in the Field of Electrical and Power Engineering". Doctoral School of Energy and Geotechnology : Kuressaare, January 14-19, 20082008 / p. 103-107 : ill Comparison of university level study methods and laboratory equipment for teaching of electrical drives [Electronic resource]Laugis, Juhan; Lehtla, TõnuEPE 2005 Dresden : 11th European Conference on Power Electronics and Applications : 11-14 September 2005, Dresden, Germany2005 / [8] p. : ill. [CD-ROM] Computer controlled determination of induction motor characteristics and parametersGrunin, Oleg; Kulmar, Lembit; Lehtla, TõnuPEMC'94 : conference publication : West-East technology bridge International Conference on Power Electronics, Motion Control and associated applications, 20-22 September 1994, Warsaw, Poland. Vol. 11994 / p. 60-65: ill Concept maps as a tool for engineering educationRaud, Zoja; Lehtla, Tõnu13th International Symposium "Topical Problems in the Field of Electrical and Power Engineering." Doctoral School of Energy and Geotechnology II : Pärnu, Estonia, January 14-19, 20132013 / p. 31-36 : ill Concept maps in Power Electronics education [Electronic resource]Raud, Zoja; Vodovozov, Valery; Lehtla, TõnuCPE 2013 : 2013 International Conference on Compatibility and Power Electronics (CPE) : June 5-7, 2013, Ljubljana, Slovenia : conference proceedings2013 / p. 280-285 : ill [CD-ROM] Control of special purpose linear drivesLaugis, Juhan; Lehtla, TõnuEPE'97 : 7th European Conference on Power Electronics and Applications, 8-10 September 1997, Trondheim, Norway : proceedings. Vol. 31997 / p. 3.541-3.546: ill Control of ultracapacitors energy exchange [Electronic resource]Roasto, Indrek; Lehtla, Tõnu; Möller, Taavi; Rosin, ArgoEPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Portorož, Slovenia, August 30 - September 1, 2006 : proceedings2006 / p. 1401-1406 : ill. [CD-ROM] https://ieeexplore.ieee.org/document/4778599 Control strategies of ultracapacitorsRoasto, Indrek; Lehtla, Tõnu; Rosin, Argo3rd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology : Kuressaare, Estonia, January 16-21, 20062006 / p. 85-88 Control, supervision and operation diagnostics of light rail electric transportRosin, Argo; Lehtla, Tõnu2005 https://www.ester.ee/record=b2073559*est Cooling methods for high-power electronic systemsBlinov, Andrei; Vinnikov, Dmitri; Lehtla, TõnuScientific journal of Riga Technical University. Serija 4, Power and electrical engineering2011 / p. 79-86 : ill Curriculum and study subjects in the field of electrical drives and power electronics at Tallinn Technical UniversityLehtla, TõnuSymposium "Topical Problems of Education in the Field of Electrical and Power Engineering" : Kuressaare, Estonia, January 19-24, 20042004 / p. 41-45 Dekaan Tõnu Lehtla : [vastab Mente et Manu toimetuse küsimustele]Lehtla, TõnuMente et Manu2006 / lk. 2 : portr https://www.ester.ee/record=b1242496*est Design and development of the middle-frequency isolation transformer for the high-voltage DC/DC converter [Electronic resource]Vinnikov, Dmitri; Lehtla, Tõnu; Strzelecki, Ryszard; Galkin, IljaThe 4th International Scientific Conference of The Military Technical College [Korby El-Kobbah, Cairo, Egypt] : 27-29 May 2008. Proceedings of the 6th ICEENG Conference : 27-29 May, 20082008 / p. EE045 [CD-ROM] Design considerations for propulsion drives of electric vehiclesVodovozov, Valery; Lehtla, Tõnu14th International Symposium "Topical problems in the field of electrical and power engineering. Doctoral school of energy and geotechnology. II" : Pärnu, Estonia, January 13-18, 20142014 / p. 35-39 : ill Design of an experimental setup to study the drives of battery electric vehiclesVodovozov, Valery; Raud, Zoja; Lehtla, TõnuWorld Academy of Science, Engineering and Technology2013 / p. 816-823 : ill Design of the exterior-rotor PM synchronous motor for an electric powered paragliderNukki, Rene; Lehtla, Tõnu; Kilk, Aleksander; Kangru, Tavo2015 56th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)2015 / p. 245-248 : ill Determination of high frequency parameters of an induction motor driveKlytta, Marius; Lehtla, Tõnu; Sidelnikov, PavelEPE-PEMC 2004 : 11th International Power Electronics and Motion Control Conference : 2-4 September 2004, Riga, Latvia : proceedings. Vol. 6 of 7, Mechatronics, industrial drive sytems, power electronics and drives in transport, EMC and design of PE systems2004 / p. 6-391 - 6-395 : ill Development of control and diagnostics system for Tallinn tramsRosin, Argo; Pettai, Elmo; Lehtla, TõnuBEC 2004 : proceedings of the 9th Biennial Baltic Electronics Conference : October 3-6, 2004, Tallinn, Estonia2004 / p. 327-330 : ill Development of energy reserve optimization methodology for households with renewable power systems = Taastuva energia allikatega kodumajapidamiste energiareservi optimeerimise metoodika väljatöötamineAuväärt, Aivar2014 http://www.ester.ee/record=b4412783*est Distance learning in electrical engineeringLaugis, Juhan; Lehtla, Tõnu; Vodovozov, Valery6th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology : [Kuressaare, January 12-17, 2009]2009 / p. 148-153 Distributed energy supply system for electric vehiclesPettai, Elmo; Laugis, Juhan; Lehtla, Tõnu; Joller, Jüri; Rosin, ArgoEPE-PEMC 2004 : 11th International Power Electronics and Motion Control Conference : 2-4 September 2004, Riga, Latvia : proceedings. Vol. 6 of 7, Mechatronics, industrial drive sytems, power electronics and drives in transport, EMC and design of PE systems2004 / p. 6-218 - 6-221 Educational thesauri for mastering engineering courcesVodovozov, Valery; Lehtla, Tõnu11th International Symposium "Topical Problems in the Field of Electrical and Power Engineering." Doctoral School of Energy and Geotechnology II : Pärnu, Estonia, January 16-21, 20122012 / p. 24-29 : ill Educational thesaurus for learning electronicsRaud, Zoja; Vodovozov, Valery; Lehtla, TõnuRecent Researches in Communications, Information Science and Education : [proceedings of CIT'12, ELECTROSCIENCE'12, WORLD-EDU'12 : Vouliagmeni Beach, Athens, Greece, March 7-9, 2012]2012 / p. 67-79 : ill Eesti tehnikaharidust edendamasLehtla, TõnuLiivika album 19991999 / lk. 65-67 Eesti võimalus - elektri reaalaja tariifLehtla, Tõnu; Järvik, JaanEesti Päevaleht2008 / 24. märts, lk. 3 Eesti võimalus - elektri reaalaja tariifLehtla, Tõnu; Järvik, JaanTallinna Tehnikaülikooli aastaraamat 20082009 / lk. 364-366 Eestlase eluviisist ja energeetikastLehtla, TõnuTallinna Tehnikaülikooli aastaraamat 20062007 / lk. 40-45 Eestlaste suur jalajälg : [eestlaste energiakasutusest]Lehtla, TõnuEesti Päevaleht2006 / 24. nov., lk. 3 https://epl.delfi.ee/artikkel/51065269/tonu-lehtla-eestlaste-suur-jalajalg Ehitiste elektripaigaldisedLehtla, Tõnu; Risthein, Endel2004 https://www.ester.ee/record=b2007201*est Ehitiste elektripaigaldisedLehtla, Tõnu; Risthein, Endel2004 https://www.ester.ee/record=b2007226*est Ehitiste elektripaigaldisedLehtla, Tõnu; Risthein, Endel2004 https://www.ester.ee/record=b2007155*est Elekter meie ümberLehtla, TõnuElektriala2013 / lk. 5 ElektertranspordistLehtla, TõnuElektriku kalender 19981997 / lk. 139-152: ill Elektertranspordist ja muustLehtla, TõnuPingering1998 / 5. märts, lk. 3: ill ElektriajamidLehtla, TõnuElektriku kalender 19961995 / lk. 127-134: ill ElektriajamidLehtla, Tõnu2007 http://www.ester.ee/record=b2292918*est Elektriajamid : [bakalaureuse- ja magistriõppe õpik]Lehtla, Tõnu; Risthein, Endel2007 https://www.ester.ee/record=b2272845*est Elektriajamid : [õpik]Lehtla, Tõnu; Risthein, Endel2007 https://www.ester.ee/record=b2292918*est Elektriajamite ja jõuelektroonika instituudi aastaraamat 20102011 https://www.ester.ee/record=b1684735*est Elektriajamite ja jõuelektroonika instituudi aastaraamat 2011 = Annual report 2011 : Department of Electrical Drives and Power Electronics2012 http://www.ester.ee/record=b1684735*est Elektriajamite raaljuhtimineLehtla, TõnuTehnika ja Tootmine1989 / lk. 10-12 https://www.ester.ee/record=b1073047*est Elektriku kalender 19951994 https://www.ester.ee/record=b1194736*est Elektriku kalender 19961995 https://www.ester.ee/record=b1194736*est Elektriku kalender 19971996 https://www.ester.ee/record=b1194736*est Elektriku kalender 1998Laugis, Juhan; Risthein, Endel; Lehtla, Tõnu; Oorn, Arvo; Tomson, Teolan; Joller, Jüri; Lehtla, Madis1997 Elektriku kalender 1999Jõeveer, Mihkel; Laugis, Juhan; Lehtla, Tõnu; Risthein, Endel; Rosin, Argo1998 Elektriku kalender 2000Jõeveer, Mihkel; Laugis, Juhan; Risthein, Endel; Lehtla, Tõnu1999 Elektrimootorite kaitseLehtla, TõnuTehnika ja Tootmine1991 / 7/8, lk. 27-30: joon Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 3, Rikkesilmuse näivtakistus = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 3, Loop impedance (IEC 61557-3:2019)2022 https://www.ester.ee/record=b5509793*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 7, Faasijärjestus = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 7, Phase sequence (IEC 61557-7:2019)2022 https://www.ester.ee/record=b5509797*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 7, Faasijärjestus = Electrical safety in low voltage distribution systems up to 1000 V AC and 1500 V DC : equipment for testing, measuring or monitoring of protective measures. Part 7, Phase sequence (IEC 61557-7:2019/AMD1:2023)2023 https://www.ester.ee/record=b5652663*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 7, Faasijärjestus = Electrical safety in low voltage distribution systems up to 1000 V AC and 1500 V DC : equipment for testing, measuring or monitoring of protective measures. Part 7, Phase sequence (IEC 61557-7:2019+IEC 61557-7:2019/AMD1:2023)2023 https://www.ester.ee/record=b5651790*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V [Võrguteavik] : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 1, Üldnõuded = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 1, General requirements (IEC 61557-1:2019)2021 https://www.ester.ee/record=b5479190*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V [Võrguteavik] : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 2, Isolatsioonitakistus = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 2, Insulation resistance (IEC 61557-2:2019)2021 https://www.ester.ee/record=b5479192*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V [Võrguteavik] : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 4, Maandusjuhtide ja potentsiaaliühtlustusjuhtide takistus = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 4, Resistance of earth connection and equipotential bonding (IEC 61557-4:2019)2021 https://www.ester.ee/record=b5479193*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V [Võrguteavik] : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 5, Maandustakistus = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 5, Resistance of earth (IEC 61557-5:2019)2021 https://www.ester.ee/record=b5479568*est Elektriohutus madalpingevõrkudes vahelduvpingega kuni 1000 V ja alalispingega kuni 1500 V [Võrguteavik] : kaitsesüsteemide katsetus-, mõõte- ja seireseadmed. Osa 6, Rikkevoolukaitseaparaatide tõhusus TT-, TN- ja IT-süsteemides = Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. : equipment for testing, measuring or monitoring of protective measures. Part 6, Effectiveness of residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:2019)2021 https://www.ester.ee/record=b5479599*est Elektriseadmed [Võrguteavik] : liigvoolukaitselülitid majapidamis- ja muudele taolistele paigaldistele. Osa 2, Vahelduv- ja alalisvoolul kasutatavad kaitselülitid = Electrical accessories : circuit-breakers for overcurrent protection for household and similar installations. Part 2, Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2016, modified)2021 https://www.ester.ee/record=b5473393*est Elektrivarustuse tulevikuvisioonidLehtla, Tõnu; Vinnal, Toomas2015 http://www.ester.ee/record=b4511325*est Elektrivarustuse tulevikuvisioonid : [kõrgkooliõpik]Lehtla, Tõnu; Vinnal, Toomas2016 http://www.ester.ee/record=b4571559*est EMI problems of the high frequency 3-phase rectifierVinnikov, Dmitri; Lehtla, Tõnu; Joller, Jüri3rd International Scientific Workshop "Compatibility in Power Electronics" (CPE 2003) : Gdansk-Zielona Gora, Poland, 28-30 May, 20032003 / p. 159-161 Endel Risthein : lapsepõlvest tänaseni. Artiklid. Bibliograafia2016 https://www.ester.ee/record=b4580635*est Energeetika : pooljuhid - otsapidi uueneva energiatehnika küljesLehtla, TõnuHorisont2012 / lk. 34-39 : ill Energeetika tulevik - otsapidi tarkvõrkude küljesLehtla, TõnuHorisont2012 / lk. 32-37 : ill EnergeetikateaduskondLehtla, Tõnu; Järvik, JaanLeiutajaid ja leiutisi Tallinna Tehnikaülikoolis 1922-20072008 / lk. 19-33 : ill https://www.ester.ee/record=b2412718*est Energeetikateaduskond 2007Lehtla, TõnuTallinna Tehnikaülikooli aastaraamat 20072008 / lk. 35-41 Energeetikateaduskond on kahe jalaga maa peal : [TTÜ energeetikateaduskond sai 2008. a. 50-aastaseks : küsimustele vastab dekaan Tõnu Lehtla]Tohver, Sirje; Lehtla, TõnuÕpetajate Leht2009 / 27. märts, lk. 9 Energia- ja geotehnika doktorikool areneb jõudsalt. Doktorikooli teadussuunad TTÜsLehtla, Tõnu; Vaimann, Toomas; Ummelas, MartMente et Manu2013 / lk. 16-17 : fot https://www.ester.ee/record=b1242496*est Energiajulgeolek ja elektrivõrgudValtin, Juhan; Lehtla, TõnuPostimees2011 / lk. 13 Energiastrateegia, energiajulgeolek ja töökindlad elektrivõrgudLehtla, Tõnu; Valtin, JuhanTallinna Tehnikaülikooli aastaraamat 20122013 / lk. 22-25 Energiasääst elektriajamitesLehtla, TõnuElektriala2004 / 2, lk. 10-11 : ill Energiatehnika uued õppekavad ja -ained [TTÜs]Lehtla, Tõnu; Valtin, JuhanElektriala2010 / 3, lk. 10-11 Energy efficient trajectory planning of industrial robotsAuväärt, Aivar; Lehtla, Tõnu8th International Workshop on Research and Education in Mechatronics 2007 : 14-15 June 2007, Tallinn, Estonia2007 / p. 89-92 Energy-efficient predictive control of centrifugal multi-pump stationsVodovozov, Valery; Lehtla, Tõnu; Bakman, Ilja; Raud, Zoja; Gevorkov, LevonPQ2016 : the 10th International Conference 2016 Electric Power Quality and Supply Reliability Conference (PQ) : August 29-31, 2016, Tallinn, Estonia : proceedings2016 / p. 233-238 : ill https://doi.org/10.1109/PQ.2016.7724119 Engineering education : problems, tendencies and solutionsVodovozov, Valery; Raud, Zoja; Lehtla, Tõnu9th International Symposium "Topical problems in the field of electrical and power engineering". Doctoral school of energy and geotechnology. II : Pärnu, Estonia, June 14-19, 20102010 / p. 166-173 Enhancing students’ activity in electrical engineering through Web and social networksRaud, Zoja; Vodovozov, Valery; Lehtla, TõnuInternational Conference Educon 2012 : collaborative learning & new pedagogic approaches in engineering education : Marrakech - Morocco, 17-20 April 20122012 / p. 263-269 : ill Experimental sand-filter system in Tallinn water treatment plantRosin, Argo; Laugis, Juhan; Lehtla, TõnuPLCOpen-Industrial Control Programming Conference 20002000 / p. 6 Experimental sand-filter systems in Tallinn Water Treatment PlantRosin, Argo; Lehtla, Tõnu; Laugis, Juhan4th International PLCopen Conference on Industrial Control Programming : ICP 2000 conference : October 10 and 11, 2000, Utrecht, The Netherlands2000 / p. 39-44 : ill Experimental water treatment systems control and monitoring via multipoint interfaceRosin, Argo; Lehtla, TõnuBEC 2002 : proceedings of the 8th Biennial Baltic Electronics Conference : October 6-9, 2002, Tallinn, Estonia2002 / p. 397-400 : ill Fault detection and protection system for the power converters with high-voltage IGBTs [Electronic resource]Vinnikov, Dmitri; Roasto, Indrek; Lehtla, TõnuICECS 2008 : The 15th IEEE International Conference on Electronics, Circuits and Systems : August 31 - September 3, 2008, Malta2008 / p. 922-925 : ill. [CD-ROM] Flexible curricula for e-learning of SME staff in electronic engineeringRaud, Zoja; Vodovozov, Valery; Lehtla, Tõnu9th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2010) : August 18-20, 2010, Japan2010 / p. 384-388 Hannoveri mess 98Lehtla, TõnuPingering1998 / 14. mai, lk. 3: ill Hardware-in-the-loop simulator of a flow control system for centrifugal pumpsGevorkov, Levon; Vodovozov, Valery; Lehtla, Tõnu; Raud, Zoja2016 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) : proceedings : Opera Nova's Congress Center, Bydgoszcz, Poland, 29. June - 01. July, 20162016 / p. 472-477 : ill https://doi.org/10.1109/CPE.2016.7544234 Hardware-in-the-loop simulator of vessel electric propulsion driveVodovozov, Valery; Raud, Zoja; Bakman, Ilja; Lehtla, Tõnu; Gevorkov, Levon2015 9th International Conference on Compatibility and Power Electronics (CPE) : proceedings : Faculty of Science and Technology (FCT), Caparica, Lisbon, Portugal, 24-26 June, 20152015 / p. 425-430 : ill http://dx.doi.org/10.1109/CPE.2015.7231113 High-efficiency predictive control of pumpingVodovozov, Valery; Bakman, Ilja; Raud, Zoja; Lehtla, TõnuBEC 2016 : 2016 15th Biennial Baltic Electronics Conference : proceedings of the 15th Biennial Baltic Electronics Conference : Tallinn University of Technology, October 3-5, 2016, Tallinn, Estonia2016 / p. 203-206 : ill http://www.ester.ee/record=b2150914*est Hilissuviseid mõtisklusi haridusestLehtla, TõnuElektriala2012 / lk. 8 : ill Hoonete jõu- ja andmevõrkudestLehtla, TõnuElektriku kalender 19991998 / lk. 164-169: ill Hugo Tiismus 10.04.1924 - 07.01.2007 : meenutused. Fotod. Bibliograafia2014 https://www.ester.ee/record=b3073458*est Hugo Tiismus ja tema aegLehtla, TõnuHugo Tiismus 10.04.1924 - 07.01.2007 : meenutused. Fotod. Bibliograafia2014 / lk. 23-31 : fot Impact of component losses on the efficiency of the LC-filter based dual active bridge for the isolation stage of power electronic transformer [Electronic resource]Beldjajev, Viktor; Lehtla, Tõnu; Zakis, JanisCPE 2013 : 2013 International Conference on Compatibility and Power Electronics (CPE) : June 5-7, 2013, Ljubljana, Slovenia : conference proceedings2013 / p. 132-137 : ill [CD-ROM] Implementation of snubber circuits in power converters with high-voltage IGBTsJalakas, Tanel; Blinov, Andrei; Mõlder, Heigo; Lehtla, Tõnu8th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology. II : [Pärnu, January 11-16, 2010 : proceedings]2010 / p. 42-45 : ill ImpulssanduridLehtla, TõnuTehnika ja Tootmine1989 / lk. 19-21 : ill https://www.ester.ee/record=b1073047*est Influence of regenerative braking to power characteristics of a gantry craneBeldjajev, Viktor; Lehtla, Tõnu; Mõlder, HeigoPQ2010 : 7th International Conference "2010 Electric Power Quality and Supply Reliability" : June 16-18, 2010, Kuressaare, Estonia2010 / p. 73-77 : ill Influence of specific requirements on the design of auxiliary power supply for a light rail vehicleVinnikov, Dmitri; Lehtla, Tõnu2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" : Kuressaare, Estonia, January 17-22, 20052005 / p. 93-97 : ill Influence of variable energy flow to power characteristicsBeldjajev, Viktor; Lehtla, Tõnu; Mõlder, Heigo9th International Symposium "Topical problems in the field of electrical and power engineering". Doctoral school of energy and geotechnology. II : Pärnu, Estonia, June 14-19, 20102010 / p. 29-32 : ill Inimesed ja automaadidLehtla, TõnuHorisont1986 / lk. 1-4 : ill. : foto https://www.ester.ee/record=b1072243*est https://www.digar.ee/arhiiv/et/perioodika/70128 Innovative co-operation between educational institutions of different levels in the framework of Leonardo da Vinci mechatronics programmeLaugis, Juhan; Lehtla, TõnuActual Problems of Electrical Drives and Industry Automation : the 3rd Research Symposium of Young Scientists : Tallinn, Estonia, May 19-26, 20012001 / p. 9-10 Integraalsed loogikalülitused : katsestendi kirjeldus ja laboratoorsete tööde juhendid eriala "Elektriajamid ja tööstusseadmete automatiseerimine" 0628 üliõpilastele1989 https://www.ester.ee/record=b1216651*est Integratsioon ja nüüdistehnika arengujooniLehtla, TõnuTehnika ja Tootmine1986 / lk. 23-25 https://www.ester.ee/record=b1073047*est Intelligent transformer : possibilities and challengesBeldjajev, Viktor; Roasto, Indrek; Lehtla, TõnuScientific journal of Riga Technical University. Serija 4, Power and electrical engineering2011 / p. 95-100 : ill Interinstitutional activity in professional training in power electronicsVodovozov, Valery; Vinnikov, Dmitri; Laugis, Juhan; Lehtla, TõnuТехнiчна електродинамика2008 / 7, с. 58-61 : ил Interinstitutional activity in professional training in power electronics [Electronic resource]Vodovozov, Valery; Vinnikov, Dmitri; Laugis, Juhan; Lehtla, Tõnu19th International Symposium on Power Electronics, Electrical Drives, Automation and Motion : Speedam 2008 : Ischia (Italy), June 11th-13th, 2008 : conference proceedings2008 / p. 492-495 : ill. [CD-ROM] Interlock delay time minimization and its impact on the high-voltage half-bridge DC/DC converterJalakas, Tanel; Vinnikov, Dmitri; Lehtla, Tõnu; Bolgov, Viktor6th International Conference-Workshop Compatibility and Power Electronics : May 20-22, 2009 : CPE 2009 : conference proceedings2009 / p. 438-443 [CD-ROM] Interlock delay time minimization and its impact on the high-voltage half-bridge DC/DC converter [Electronic resource]Jalakas, Tanel; Vinnikov, Dmitri; Lehtla, Tõnu; Bolgov, Viktor2009 Compatibility and Power Electronics CPE 2009 : 6th International Conference-Workshop2009 / p. 438-443 : ill. [CD-ROM] Inverters with reduced switching losses for industrial applicationsVodovozov, Valery; Egorov, Mikhail; Raud, Zoja; Lehtla, TõnuProceedings : INDIN 2011 : 2011 9th IEEE International Conference on Industrial Informatics : Lisbon, Portugal, 26-29 July, 20112011 / p. 274-279 : ill Joonised õppeainete "Elektronjuhtimisseadmed" ning "Elektriaparaadid ja automatiseerimise vahendid" loengukonspekti juurde1981 https://www.ester.ee/record=b1312241*est Juhan Laugis : 07.03.1938-01.11.2010 : [in memoriam]Lehtla, TõnuTallinna Tehnikaülikooli aastaraamat 20102011 / lk. 335-337 Juhan Laugis 07.03.1938 - 01.11.2010 : meenutused. Artiklid. Bibliograafia2013 https://www.ester.ee/record=b2941131*est Juhan Laugis kui leiutajaLehtla, TõnuJuhan Laugis 07.03.1938 - 01.11.2010 : meenutused. Artiklid. Bibliograafia2013 / lk. 44-51 : fot https://www.ester.ee/record=b2941131*est Jõuelektroonika ja elektriajamidLehtla, Tõnu2003 http://www.ester.ee/record=b1792327*est Jõuelektroonika suurfoorum TrondheimisLehtla, TõnuPingering1997 / 25. sept., lk. 3 : ill Kas alternatiivenergeetikal on tulevikku?Lehtla, TõnuElektriala2000 / 3, lk. 30-31 Kergrööbassõidukite ajamid ja juhtimineLaugis, Juhan; Lehtla, Tõnu; Joller, Jüri; Rosin, Argo; Vinnikov, Dmitri; Lehtla, Madis2008 http://www.ester.ee/record=b2394445*est Kild Tallinna Tehnikaülikooli mälust : sõnavõtt raamatu "Juhan Laugis (07.03.1938-01.11.2010). Meenutused. Artiklid. Bibliograafia" esitlusel 7. märtsil 2013Lehtla, TõnuTallinna Tehnikaülikooli aastaraamat 20132014 / lk. 314-315 Kodumajapidamises ja muudes taolistes oludes kasutatavad pistikühendusedLehtla, Tõnu; Risthein, Endel2007 https://www.ester.ee/record=b2311359*est Kuhu lähed, Eesti Ülikool?Lehtla, TõnuÕpetajate Leht2009 / 27. märts, lk. 9 : fot Kuidas muuta Eesti energeetika teadmistepõhiseks?Lehtla, TõnuElektriala2008 / 1, lk. 11-13 Laboratory development system for electrical drives and industrial process controlLehtla, Tõnu; Joller, JüriAutomaatio 97, 23.-25.9.1997, Helsinki, Finland : esitelmien lyhennelmät1997 / p. 191 Laboratory setup for studying ultracapacitors in industrial applicationsRoasto, Indrek; Vinnikov, Dmitri; Lehtla, TõnuEPE-PEMC 2008 : 2008 13th International Power Electronics and Motion Control Conference : 1-3 September 2008, Poznan, Poland : abstracts2008 / p. 77-78 Laboratory setup for studying ultracapacitors in industrial applications [Electronic resource]Roasto, Indrek; Vinnikov, Dmitri; Lehtla, TõnuEPE-PEMC 2008 : 2008 13th International Power Electronics and Motion Control Conference : 1-3 September 2008, Poznan, Poland : proceedings2008 / p. 2034-2037 : ill. [CD-ROM] Learning situations in an embedded system : NetLab projectKremer, Martina; Seiler, Sven; Kuvaja, Markus; Ptasik, Dennis; Lehtla, Tõnu; Ellermaa, Rain; Pähnapuu, Lembit; Randmaa, Riina; Pikner, Heiko; Heinaste, Urmas; Bernhard, Dirk; Sell, Raivo2013 https://www.ester.ee/record=b3045839*est LekkevoolukaitseLehtla, TõnuTehnika ja Tootmine1987 / lk. 43-45 https://www.ester.ee/record=b1073047*est Linear induction motors for multi purpose energy conversionLaugis, Juhan; Lehtla, TõnuPEMC'96 : 7th International Power Electronics & Motion Control Conference, Exhibition, Tutorials, Budapest, Hungary, 2-4 September, 1996 : proceedings. Volume 3 of 31996 / p. 3/88-3/92: ill Loodus, inimene ja tehnikaLehtla, TõnuSirp ja Vasar : ENSV Kultuuriministeeriumi ja loominguliste liitude häälekandja1988 https://dea.digar.ee/page/sirpjavasar/1988/07/01/3 https://dea.digar.ee/page/sirpjavasar/1988/07/08/12 https://www.ester.ee/record=b1321142*est Lugupeetud robotTiismus, Hugo; Lehtla, TõnuNoorte kalender. 19871986 / lk. [?] https://www.ester.ee/record=b1535025*est Madalpingelised aparaadikoosted2001 https://www.ester.ee/record=b1465704*est Madalpingelised aparaadikoosted. Osa 5, Avalike elektrivõrkude elektrijaotuskoosted = Low-voltage switchgear and controlgear assemblies. Part 5, Assemblies for power distribution in public networks (IEC 61439-5:2023)2023 https://www.ester.ee/record=b5641184*est Madalpingelised aparaadikoosted. Osa 1, Üldreeglid = Low-voltage switchgear and controlgear assemblies. Part 1, General rules (IEC 61439-1:2009, modified)2010 https://www.ester.ee/record=b2646332*est Madalpingelised aparaadikoosted. Osa 1, Üldreeglid = Low-voltage switchgear and controlgear assemblies. Part 1, General rules (IEC 61439-1:2011)2012 https://www.ester.ee/record=b2860114*est Madalpingelised aparaadikoosted. Osa 2, Jõuaparaadikoosted = Low-voltage switchgear and controlgear assemblies. Part 2, Power switchgear and controlgear assemblies (IEC 61439-2:2009)2010 https://www.ester.ee/record=b2646336*est Madalpingelised aparaadikoosted. Osa 2, Jõuaparaadikoosted = Low-voltage switchgear and controlgear assemblies. Part 2, Power switchgear and controlgear assemblies (IEC 61439-2:2011)2012 https://www.ester.ee/record=b2860121*est Madalpingelised aparaadikoosted. Osa 3, Jaotuskilbid, mida tohivad käsitada tavaisikud = Low-voltage switchgear and controlgear assemblies. Part 3, Distribution boards intended to be operated by ordinary persons (DBO) (IEC 61439-3:2012)2013 https://www.ester.ee/record=b2940430*est Madalpingelised elektripaigaldised. Osa 7-716, Nõuded eripaigaldistele ja -paikadele. Väikepingeline alalisvoolujaotus info- ja sidetehnika kaablitaristu kaudu = Low-voltage electrical installations. Part 7-716, Requirements for special installations or locations. ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)2023 https://www.ester.ee/record=b5652985*est Madalpingelised elektripaigaldised. Osa 8-2, Tootevtarbijate madalpingelised elektripaigaldised [Võrguteavik] = Low-voltage electrical installations. Part 8-2, Prosumer's low-voltage electrical installations (IEC 60364-8-2:2019)2019 https://www.ester.ee/record=b5261700*est Madalpingelised elektripaigaldised. Osa 8-1, Talitluslikud aspektid [Võrguteavik] : energiatõhusus = Low-voltage electrical installations. Part 8-1, Functional aspects : energy efficiency (IEC 60364-8-1:2019)2019 https://www.ester.ee/record=b5248920*est Madalpingelised elektripaigaldised. Osa 8-2, Tootevtarbijate madalpingelised elektripaigaldised [Võrguteavik] = Low-voltage electrical installations. Part 8-2, Prosumer's low-voltage electrical installations (IEC 60364-8-2:2019)2021 https://www.ester.ee/record=b5464944*est Madalpingelised lülitus- ja juhtimisaparaadid. Osa 1, Üldreeglid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 1, General rules (IEC 60947-1:2020)2021 https://www.ester.ee/record=b5426491*est Madalpingelised lülitusaparaadidLehtla, Tõnu; Risthein, Endel2009 https://www.ester.ee/record=b2478880*est Madalpingelised lülitusaparaadidLehtla, Tõnu; Risthein, Endel2009 https://www.ester.ee/record=b2478893*est Madalpingelised lülitusaparaadidLehtla, Tõnu; Risthein, Endel2005 https://www.ester.ee/record=b2109376*est Madalpingelised lülitusaparaadid. Osa 6-2, Mitmetoimelised aparaadid. Juhtimis-kaitselülitid = Low-voltage switchgear and controlgear. Part 6-2, Multiple function equipment. Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020+COR1:2021)2023 https://www.ester.ee/record=b5558784*est Madalpingelised lülitusaparaadid. Osa 1, Üldreeglid = Low-voltage switchgear and controlgear. Part 1, General rules (IEC 60947-1:2007, modified + A1:2010)2011 https://www.ester.ee/record=b2715992*est Madalpingelised lülitusaparaadid. Osa 1, Üldreeglid = Low-voltage switchgear and controlgear. Part 1, General rules2011 https://www.ester.ee/record=b2715988*est Madalpingelised lülitusaparaadid. Osa 1, Üldreeglid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 1, General rules (IEC 60947-1:2007, modified+A1:2010+A2:2014)2015 https://www.ester.ee/record=b4532304*est Madalpingelised lülitusaparaadid. Osa 1, Üldreeglid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 1, General rules (IEC 60947-1:2020)2021 https://www.ester.ee/record=b5426491*est Madalpingelised lülitusaparaadid. Osa 2, Kaitselülitid = Low-voltage switchgear and controlgear. Part 2, Circuit-breakers (IEC 60947-2:2006/A1:2009)2012 https://www.ester.ee/record=b2889103*est Madalpingelised lülitusaparaadid. Osa 2, Kaitselülitid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 2, Circuit-breakers (IEC 60947-2:2016/A1:2019)2020 https://www.ester.ee/record=b5307904*est Madalpingelised lülitusaparaadid. Osa 2, Kaitselülitid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 2, Circuit-breakers (IEC 60947-2:2016+COR1:2016)2017 http://www.ester.ee/record=b4768106*est Madalpingelised lülitusaparaadid. Osa 2, Kaitselülitid [Võrguteavik] = Low-voltage switchgear and controlgear. Part 2, Circuit-breakers (IEC 60947-2:2016+COR1:2016+IEC 60947-2:2016/A1:2019)2020 https://www.ester.ee/record=b5307902*est Madalpingeliste lülitus- ja juhtimiskilpide oskussõnuLehtla, TõnuElektriku kalender 19961995 / lk. 164-177: ill Magnetohüdrodünaamika teaduses ja praktikas2017 http://www.ester.ee/record=b4690571*est Majapidamis- ja muud taolised elektriseadmed : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements2023 https://www.ester.ee/record=b5650614*est Majapidamis- ja muud taolised elektriseadmed : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements (IEC 60335-1:2010, modified+IEC 60335-1:2010/A1:2013, modified+COR1:2014+IEC 60335-1:2010/A2:2016, modified+COR1:2016)2023 https://www.ester.ee/record=b5650603*est Majapidamis- ja muud taolised elektriseadmed [Võrguteavik] : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements2021 https://www.ester.ee/record=b5464581*est Majapidamis- ja muud taolised elektriseadmed [Võrguteavik] : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements (IEC 60335-1:2010, modified)2017 http://www.ester.ee/record=b4751427*est Majapidamis- ja muud taolised elektriseadmed [Võrguteavik] : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements (IEC 60335-1:2010, modified+IEC 60335-1:2010/A1:2013, modified+COR1:2014+IEC 60335-1:2010/A2:2016, modified+COR1:2016)2021 https://www.ester.ee/record=b5464541*est Majapidamis- ja muud taolised elektriseadmed [Võrguteavik] : ohutus. Osa 1, Üldnõuded = Household and similar electrical appliances : safety. Part 1, General requirements (IEC 60335-1:2010, modified+IEC 60335-1:2010/A1:2013,modified+COR1:2014+IEC 60335-1/A2:2016,modified+COR1:2016)2020 https://www.ester.ee/record=b5340578*est Masinate ohutus : masinate elektriseadmed. Osa 1, Üldnõuded = Safety of machinery : electrical equipment of machines. Part 1, General requirements (IEC 60204-1:2005, modified + IEC 60204-1:2005/A1:2008)2011 https://www.ester.ee/record=b2742602*est Masinate ohutus : ohutusega seotud juhtimissüsteemide funktsionaalne ohutus = Safety of machinery : functional safety of safety-related control systems (IEC 62061:2021)2022 https://www.ester.ee/record=b5509802*est Masinate ohutus [Võrguteavik] : masinate elektriseadmed. Osa 1, Üldnõuded = Safety of machinery : electrical equipment of machines. Part 1, General requirements (IEC 60204-1:2018, modified)2018 https://www.ester.ee/record=b5168846*est Measurement and data communication technology for the implementation in Estonian transmission network = Mõõte- ja andmesidetehnoloogia uurimine ja rakendamine Eesti kõrgepinge ülekandevõrgusMets, Igor2013 https://www.ester.ee/record=b3046254*est Mechatronic - new profession in EstoniaRosin, Argo; Laugis, Juhan; Lehtla, TõnuActual Problems of Electrical Drives and Industry Automation : the research symposium of young scientists : Tallinn, Estonia, May 31 - June 5, 19991999 / p. 79-81: ill Mechatronics in initial vocational trainingRosin, Argo; Lehtla, Tõnu; Laugis, JuhanThe 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8 - 11, 2000, Tallinn, Estonia : conference proceedings2000 / p. 225-228 : ill Mechatronics new study field or new branch of science and engineeringLaugis, Juhan; Lehtla, Tõnu10th International Power Electronics and Motion Control Conference : EPE-PEMC 2002, Cavtat & Dubrovnik : 9-11 September 2002, Cavtat & Dubrovnik, Croatia2002 MechMate : metoodika, õppekava ja kasutusjuhisedLehtla, Tõnu; Pettai, Elmo2018 https://digi.lib.ttu.ee/i/?12131 https://www.ester.ee/record=b5227432*est MechMate õppematerjalid : [õpikute kogumik]Kütt, Lauri; Pettai, Elmo; Müür, Margus; Maask, Vahur; Lehtla, Tõnu2018 https://digi.lib.ttu.ee/i/?12126 MechMate õppematerjalid [Võrguteavik]Kütt, Lauri; Pettai, Elmo; Müür, Margus; Maask, Vahur; Lehtla, Tõnu2019 https://www.ester.ee/record=b5227431*est https://digi.lib.ttu.ee/i/?12126 Mehhatroonika - uus elukutse, tehnika- või teadusharu?Lehtla, TõnuElektriala2001 / 5, lk. 7-9 MikroprotsessortehnikaLehtla, Tõnu; Kulmar, Lembit1995 https://www.ester.ee/record=b1054894*est Mobile roboticsLehtla, Tõnu; Dudziak, ReinerIntegrated systems and design : interstudy, May 9, 20082008 / p. 31-44 : ill Modelling of high frequency voltage transients of electrical motorsLaugis, Juhan; Lehtla, TõnuELECTROMOTION '99 : 3rd International Symposium on Advanced Electromechanical Motion Systems : July 8-9, 1999, Patras, Greece : proceedings. Vol. I1999 / p. 243-247 Modelling of transients in IGBT inverter fed AC drivesLehtla, Tõnu; Kulmar, LembitТезисы докладов I международной (XII всероссийской) конференции по автоматизированному электроприводу, 26-28 сентября 1995 г., Санкт-Петербург1995 / с. 19 Modelling of voltage transients on inverter fed AC induction motorLehtla, TõnuStockholm Power Tech : International Symposium on Electrical Power Engineering : June 18-22, 1995 : [papers]. Electrical machines and drives1995 / p. 438-439 Modernisation of trams in EstoniaLaugis, Juhan; Lehtla, Tõnu; Pettai, Elmo; Joller, Jüri; Rosin, Argo; Lehtla, Madis; Vinnikov, DmitriThe 6-th International Conference on Unconventional Electromechanical and Electrical Systems : UEES'04. Vol. 2 of 32004 / p. 561-564 Modernization of electrical transport systems in EstoniaLaugis, Juhan; Lehtla, Tõnu; Joller, Jüri; Boiko, Vitali; Vinnikov, Dmitri; Lehtla, Madis10th International Power Electronics and Motion Control Conference : EPE-PEMC 2002, Cavtat & Dubrovnik : 9-11 September 2002, Cavtat & Dubrovnik, Croatia2002 Multi purpose energy conversion in electrical drivesLaugis, Juhan; Lehtla, Tõnu; Teemets, RaivoStockholm Power Tech, June 18-22, 1995 : International Symposium on Electric Power Engineering. Electrical machines and drives1995 / p. 420-425: ill New fuel cell power conditioning system for supplying dedicated loadsVinnikov, Dmitri; Roasto, Indrek; Jalakas, Tanel; Lehtla, Tõnu; Laugis, Juhan2010 9th International Conference on Environment and Electrical Engineering : Prague, Czech Republic, 16-19 May 20102010 / p. 341-344 : ill New integrated converter for hydrogen buffer interfacing in distributed energy systems [Electronic resource]Vinnikov, Dmitri; Andrijanovitš, Anna; Roasto, Indrek; Lehtla, TõnuInternational Conference on Renewable Energies and Power Quality (ICREPQ’11) : Las Palmas de Gran Canaria (Spain), 13th to 15th April 20112011 / [6] p. : ill. [CD-ROM] New Method for Stabilization of Wind Power Generation Using Energy Storage TechnologyAndrijanovitš, Anna; Egorov, Mikhail; Lehtla, Tõnu; Vinnikov, DmitriAgronomy research2010 / S1, p. 12-24 : ill Noorteadlased LohusalusLehtla, TõnuPingering1997 / 10. juuni, lk. 1: ill Overvoltages in an inverter-fed AC motor system with long cableVinnikov, Dmitri; Lehtla, Tõnu4th International Workshop CPE 2005 : Compatibility in Power Electronics : Fifth International Research and Educational Colloquium on Electronics : 1-3 June 2005, Gdynia, Poland2005 / p. 69-71 : ill Overvoltages in an inverter-fed AC motor system with long cable [Electronic resource]Vinnikov, Dmitri; Lehtla, TõnuProceedings of 4th International Workshop CPE 2005 : Compatibility in Power Electronics : Fifth International Research and Educational Colloquium on Electronics : 1-3 June 2005, Gdynia, Poland2005 / [5] p. : ill. [CD-ROM] Pahuksis alalis- ja vahelduvvoolu pärastLehtla, TõnuHorisont1981 / lk.16-17 : ill http://www.digar.ee/id/nlib-digar:291392 https://www.ester.ee/record=b1072243*est Paindtootmine; Paindtootmissüsteem; PaindtöötlemismoodulLehtla, TõnuEesti entsüklopeedia. 71994 / lk. 143 Parameter identification and comparision of an induction motor modelsLehtla, Tõnu; Joller, Jüri; Lehtla, Madis; Laugis, JuhanEighth International Conference on Power Electronics and Variable Speed Drives : 18-19 September 20002000 / p. 201-205 : ill Parameter identification of an induction motor using fuzzy logic controllerLehtla, TõnuPEMC'96 : 7th International Power Electronics & Motion Control Conference, Exhibition, Tutorials, Budapest, Hungary, 2-4 September, 1996 : proceedings. Volume 3 of 31996 / p. 3/292-3/296: ill Parameter identification of an induction motor using fuzzy logic controllerLehtla, TõnuПроблемы автоматизированного электропривода : теория и практика : научно-техническая конференция с международным участием 15-20 сентября 1997 г., Харьков1997 / 2 c.: ill Pilk energeetika ja elektrivarustuse tulevikkuLehtla, TõnuElektriala2016 / lk. 12-15 : ill Plahvatusohtlikud keskkonnad. Osa 17, Elektripaigaldiste kontroll ja korrashoid = Explosive atmospheres. Part 17, Electrical installations inspection and maintenance (IEC 60079-17:2007)2012 https://www.ester.ee/record=b2889204*est PLC-based flow rate control system for centrifugal pumpsGevorkov, Levon; Vodovozov, Valery; Lehtla, Tõnu; Bakman, Ilja2015 56th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)2015 / p. 239-243 : ill PLC-based hardware-in-the-loop simulator of a centrifugal pumpGevorkov, Levon; Vodovozov, Valery; Lehtla, Tõnu; Raud, Zoja2015 IEEE 5th International Conference on Power Engineering, Energy and Electrical Drives (POWERENG) : proceedings : May 11-13, 2015, Riga, Latvia2015 / p. 491-496 : ill http://dx.doi.org/10.1109/PowerEng.2015.7266366 Possibilities of integrating the industrial robot systems to smart gridsBeldjajev, Viktor; Lehtla, TõnuEPE-PEMC 2010 : 14th International Power Electronics and Motion Control Conference : 6-8 September 2010, Ohrid, Republic of Macedonia2010 Power accounting for ship electric propulsionVodovozov, Valery; Lehtla, TõnuDoctoral School of Energy and Geotechnology II : closing conference of the project : Pärnu, Estonia, January 12-17, 20152015 / p. 33-37 : ill Power electronics and electrical drivesLehtla, Tõnu2003 http://www.ester.ee/record=b1860163*est Power quality issues in dispersed generation and smart gridsVaimann, Toomas; Niitsoo, Jaan; Kivipõld, Tanel; Lehtla, TõnuElektronika ir elektrotechnika = Electronics and electrical engineering2012 / p. 23-26 : ill https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=573c03a0753bcfce3929ba739ff032b16882acf5 Praha - Hannover - Berliin - Praha - Hannover - Oslo ...Lehtla, TõnuPingering1997 / 30. nov., lk. 1: ill Preparation of industrial robot systems for work in intelligent power networksBeldjajev, Viktor; Lehtla, Tõnu8th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology. II : [Pärnu, January 11-16, 2010 : proceedings]2010 / p. 71-74 Programmeeritavad kontrolleridLehtla, TõnuTehnika ja Tootmine1987 / lk. 15-17 https://www.ester.ee/record=b1073047*est Põhja- ja Baltimaade tugevvooluprofessorite kokkutulek : [Helsingi Tehnikaülikoolis, aug. 2000 : õppetööst]Lehtla, TõnuElektriala2000 / 4, lk. 22 : fot Rahvusvaheline elektrotehnika sõnastik. Osa 151, Elektri- ja magnetseadised [Võrguteavik] = International Electrotechnical Vocabulary. Chapter 151, Electrical and magnetic devices (IEC 60050-151:2001, identical+IEC 60050-151:2001/A1:2013, identical+IEC 60050-151:2001/A2:2014, identical+IEC 60050-151:2001/Amd 3:2019, identical)2020 https://www.ester.ee/record=b5347127*est Rahvusvaheline Elektrotehnikakomitee IECLehtla, TõnuElektriku kalender 19961995 / lk. 160-163: ill Raivo Teemets 65Lehtla, TõnuElektriala2011 / 8, lk. 32 : portr Raudteealased rakendused : raudteeveeremil kasutatavad elektroonikaseadmed = Railway applications : electronic equipment used on rolling stock2012 https://www.ester.ee/record=b2758740*est Raudteealased rakendused. Elektromagnetiline ühilduvusLehtla, Tõnu2005 https://www.ester.ee/record=b2113237*est Raudteealased rakendused. Veerem. Elektriohuga seotud kaitsemeetmedLehtla, Tõnu2005 https://www.ester.ee/record=b2113361*est Raudteealased rakendused. Veeremil kasutatavad elektroonikaseadmedLehtla, Tõnu2005 https://www.ester.ee/record=b2109688*est Reliability and operation diagnostics of light rail electric transport in Estonia [Electronic resource]Rosin, Argo; Lehtla, Tõnu; Möller, TaaviEPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Portorož, Slovenia, August 30 - September 1, 2006 : proceedings2006 / p. 1751-1756 : ill. [CD-ROM] Research and development of an active learning technology for university-level education in the field of electronics and power electronics = Aktiivõppetehnoloogia uurimine ja väljatöötamine kõrghariduse õppekavale elektroonika ja jõuelektroonika valdkonnasRaud, Zoja2012 https://www.ester.ee/record=b2781667*est Research and development of digital control systems and algorithms for high power, high voltage isolated DC/DC converters = Võimsate kõrgepingeliste alalisvoolumuundurite arvjuhtimissüsteemide ja -algoritmide uurimine ning väljatöötamineRoasto, Indrek2009 https://www.ester.ee/record=b2557768*est Research and development of exterior-rotor permanent magnet synchronous machines for light aerial vehicles = Välisrootoriga püsimagnetsünkroonmasinate uurimine ja väljatöötamine kergetele õhusõidukiteleNukki, Rene2016 https://digi.lib.ttu.ee/i/?5378 https://www.ester.ee/record=b4575943*est Research and development of high-power high-voltage DC/DC converters = Võimsate kõrgepingeliste alalispingemuundurite uurimine ja välmimineJalakas, Tanel2010 https://www.ester.ee/record=b2607120*est Research and development of the new topologies for the isolation stage of the power electronic transformer = Jõuelektroonilise trafo isolatsioonilüli uudsete topoloogiate uurimine ja arendamineBeldjajev, Viktor2013 http://www.ester.ee/record=b2969664*est Research and study process in the Department of Electrical Drives and Power Electronics TTULehtla, Tõnu; Lahtmets, RainActual Problems of Electrical Drives and Industry Automation : the research symposium of young scientists : Tallinn, Estonia, May 31 - June 5, 19991999 / p. 9-11 Research of over-voltages and other high frequency phenomena in long cable AC drivesKlytta, Marius; Lehtla, Tõnu; Naadel, Raul4th International Workshop CPE 2005 : Compatibility in Power Electronics : Fifth International Research and Educational Colloquium on Electronics : 1-3 June 2005, Gdynia, Poland2005 / p. 147-149 : ill Research of over-voltages and other high frequency phenomena in long cable AC drives [Electronic resource]Klytta, Marius; Lehtla, Tõnu; Naadel, RaulProceedings of 4th International Workshop CPE 2005 : Compatibility in Power Electronics : Fifth International Research and Educational Colloquium on Electronics : 1-3 June 2005, Gdynia, Poland2005 / [5] p. : ill. [CD-ROM] Research, design and application of magnetohydrodynamical (MHD) devices for automation of casting industryJansikene, Raik2003 https://www.ester.ee/record=b1782248*est Research, design and implementation of auxiliary power supplies for the light rail vehiclesVinnikov, Dmitri; Lehtla, Tõnu2005 https://www.ester.ee/record=b2097496*est Review of possible DC-DC converter-topologies for tram's auxiliary power supplyVinnikov, Dmitri; Lehtla, TõnuEPE-PEMC 2004 : 11th International Power Electronics and Motion Control Conference : 2-4 September 2004, Riga, Latvia : proceedings. Vol. 6 of 7, Mechatronics, industrial drive sytems, power electronics and drives in transport, EMC and design of PE systems2004 / p. 6-176 - 6-179 : ill Robot Servo-Drives Control SystemKulmar, Lembit; Lehtla, TõnuSymposium on electrical power engineering, 27 January 19891989 / p. 115-122 Roboti PM-01 tarkvarasüsteem ARPS1Lehtla, TõnuTehnika ja Tootmine1988 / lk. 14-16 https://www.ester.ee/record=b1073047*est Robotid - inimese abilisedLehtla, TõnuHorisont1982 http://www.digar.ee/id/nlib-digar:291400 http://www.digar.ee/id/nlib-digar:291401 https://www.ester.ee/record=b1072243*est Robotid: plaanid, prognoosid, probleemidLehtla, TõnuHorisont1983 / lk. 10-11 : foto https://www.digar.ee/arhiiv/et/perioodika/70109 https://www.ester.ee/record=b1072243*est Robotite juhtimineLehtla, Tõnu1994 https://www.ester.ee/record=b1066872*est RobotitehnikaLehtla, Tõnu; Risthein, Endel2008 http://www.ester.ee/record=b2364692*est RobotitehnikaLehtla, Tõnu2008 http://www.ester.ee/record=b2364709*est Sagedusmuundurid tulevad ...Lehtla, TõnuPingering1998 / 17. apr., lk. 4 SagedusmuunduritestLehtla, TõnuElektriku kalender 19991998 / lk. 132-144: ill SCARA robot for MHD casting technologyKulmar, Lembit; Lehtla, Tõnu; Pettai, ElmoPEMC'94 : conference publication : West-East technology bridge International Conference on Power Electronics, Motion Control and associated applications, 20-22 September 1994, Warsaw, Poland. Vol. 11994 / p. 1195-1200: ill Siemens. Simatic S5, Programmeeritavad kontrollerid : tööpõhimõte1995 https://www.ester.ee/record=b1054893*est A simplified peak current mode control algorithm for special purpose high voltage IGBT convertersRoasto, Indrek; Vinnikov, Dmitri; Lehtla, Tõnu; Auväärt, AivarBEC 2008 : 2008 International Biennial Baltic Electronics Conference : proceedings of the 11th Biennial Baltic Electronics Conference : Tallinn University of Technology : October 6-8, 2008, Tallinn, Estonia2008 / p. 305-308 : ill Simulation in learning power electronicsLaugis, Juhan; Lehtla, Tõnu; Vodovozov, Valery7th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology. II : [Narva-Jõesuu, Estonia, 16.06-19.06.2009]2009 / p. 83-88 Simulation tools to study power electronics [Electronic resource]Raud, Zoja; Vodovozov, Valery; Lehtla, Tõnu; Pettai, ElmoEPE 2009 : 13th European Conference on Power Electronics and Applications : 8-10 September 2009, Barcelona, Spain2009 / ? p. [CD-ROM] Skeemide tingmärgid. Osa 5, Pooljuhtkomponendid ja elektronlambidLehtla, Tõnu; Tuutma, Toomas; Meister, Ants; Tamm, Uljas2000 https://www.ester.ee/record=b1413711*est Skeemide tingmärgid. Osa 9, Sidetehnika. Kommutatsiooni- ja perifeeriaseadmedLehtla, Tõnu; Tuutma, Toomas; Meister, Ants; Tamm, Uljas2000 https://www.ester.ee/record=b1413706*est Skeemide tingmärgid. Osa 10, Sidetehnika. InfoedastusseadmedLehtla, Tõnu; Tuutma, Toomas; Meister, Ants; Tamm, Uljas2000 https://www.ester.ee/record=b1413714*est State of the art and development trends of smart control systems for high voltage DC/DC convertersRoasto, Indrek; Vinnikov, Dmitri; Lehtla, Tõnu6th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology : [Kuressaare, January 12-17, 2009]2009 / p. 36-42 : ill Structure and study fields of Tallinn Technical UniversityLehtla, TõnuActual Problems of Electrical Drives and Industry Automation : the research symposium of young scientists, Lohusalu, Estonia, June 1-8, 19971997 / p. 14-18: ill Student assessment in engineering educationVodovozov, Valery; Lehtla, Tõnu; Laugis, Juhan8th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" : Doctoral School of Energy and Geotechnology. II : [Pärnu, January 11-16, 2010 : proceedings]2010 / p. 145-151 Sujuvkäivitid ja sagedusmuunduridLehtla, Tõnu1999 https://www.ester.ee/record=b1282859*est SujuvkäivititestLehtla, TõnuElektriku kalender 19991998 / lk. 146-152: ill Zur Frage der optimalen Steuerung elektrischer ServoantriebeTiismus, Hugo; Lehtla, Tõnu10. Internationale Fachtagung Industrielle Automatisierung - Automatisierte Antriebe : 14. Februar bis 16. Februar 1989 in Karl-Marx-Stadt1989 / S. 120-123 Tallinna Tehnikaülikoolis vastloodud elektrotehnika instituut soovib olla elektriala kompetentsikeskus : [intervjuu Tõnu Lehtlaga]Lehtla, Tõnu; Aro, ReinElektriala2013 / lk. 6-9 : fot Tallinnas sõitev tramm nr 99 näitab teed tulevikku : [Tõnu Lehtla kommenteerib TTÜ teadlaste loodud trammi]Ilustrumm, Kai; Lehtla, TõnuLinnaleht : TTÜ2004 / 3. dets., lk. 5 : fot Tarkvõrk : terminoloogia = Smart grid : terminology [Võrguteavik]2016 http://www.ester.ee/record=b4615584*est Teaching, learning, and assessment integration in electronics on the concept map basisRaud, Zoja; Vodovozov, Valery; Lehtla, TõnuInnovating with concept mapping : proceedings of the 7th International Conference on Concept Mapping : CMC 2016, Tallinn, Estonia, September 5-9, 2016. Volume 2, [Papers, posters and innovative experiences]2016 / p. 199-207 : ill http://www.ester.ee/record=b4604151*est Teadmistepõhine Eesti pole teadlastepõhine EestiLehtla, TõnuTallinna Tehnikaülikooli aastaraamat 20062007 / lk. 329-330 Teadmistepõhine Eesti pole teadlastepõhine EestiLehtla, TõnuEesti Päevaleht2006 / 30. juuni, lk. 3 https://epl.delfi.ee/artikkel/51043160/tonu-lehtla-teadmistepohine-eesti-pole-teadlastepohine-eesti Teaduskondade ja kolledžite üritused [TTÜ 90. aastapäeva raames]Liias, Roode; Lehtla, Tõnu; Rajangu, Väino; Rüstern, Ennu; Klesment, Raili; Kosk, Kertu; Kulu, Priit; Paas, Aet; Sagar, Maris; Lechtmets, Alge; Andrejev, Viktor; Roosileht, MareTallinna Tehnikaülikool 90 : [artiklikogumik]2009 / lk. 94-110 Tehnikateaduste doktor Raik JansikeneLehtla, TõnuElektriala2003 / lk. 29 Tehnikaülikool vs. inseneriteaduskondLehtla, TõnuMente et Manu2015 / lk. 7-9 : fot Toiteliiniga seotud sõidukite energiavahetuse juhtimissüsteem : EE200200424Pettai, Elmo; Laugis, Juhan; Lehtla, Tõnu; Joller, Jüri; Rosin, Argo2004 https://www1.epa.ee/patent/data.asp?NroParam=P200200424&ID=X551997&NID=&offset=&HKR= https://www1.epa.ee/patent/kirjeldus/P200200424.pdf Toodete tehnilises dokumentatsioonis kasutatavate tingmärkide kujundamineLehtla, Tõnu; Risthein, Endel; Harak, Heino2000 https://www.ester.ee/record=b1422646*est Toodete tehnilises dokumentatsioonis kasutatavate tingmärkide kujundamine. Osa 1, Põhireeglid = Design of graphical symbols for use in the technical documentation of products. Part 1, Basic rules (ISO 81714-1:2010)2011 https://www.ester.ee/record=b2715792*est A Toolbox to design inverters for automotive applicationsVodovozov, Valery; Raud, Zoja; Lehtla, TõnuRecent Researches in Applications of Electrical and Computer Engineering : [proceedings of the AEE'12, ACE'12, CSS'12 : Vouliagmeni Beach, Athens, Greece, March 7-9, 2012]2012 / p. 190-195 : ill https://www.researchgate.net/publication/262257028_A_toolbox_to_design_inverters_for_automotive_applications Topical problems of teaching of electrical drivesLiivik, Liisa; Jansikene, Raik; Lehtla, TõnuEPE-PEMC 2004 : 11th International Power Electronics and Motion Control Conference : 2-4 September 2004, Riga, Latvia : proceedings. Vol. 4 of 7, Motion control, adjustable speed drives and education of electrical engineering2004 / p. 4-502 - 4-506 : ill Traction and control of light rail vehiclesLaugis, Juhan; Lehtla, Tõnu; Joller, Jüri; Rosin, Argo; Vinnikov, Dmitri; Lehtla, Madis2008 http://www.ester.ee/record=b2394449*est Tram traction drives and comparison of their control methodsJoller, Jüri; Lehtla, Madis; Lehtla, Tõnu; Laugis, JuhanThe 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8 - 11, 2000, Tallinn, Estonia : conference proceedings2000 / p. 203-204 : ill TsentraliseerimiskunstLehtla, TõnuEdasi : EKP Tartu Linnakomitee, EKP Tartu Rajoonikomitee, Tartu Linna RSN ja Tartu Rajooni RSN häälekandja1989 / lk. [?] : portr https://www.ester.ee/record=b1271061*est TTÜ energeetikateaduskond anno 2007Lehtla, TõnuElektriala2007 / 3, lk. 36-38 TTÜ energeetikateaduskond ja Eesti energeetikaOorn, Arvo; Valtin, Juhan; Lehtla, Tõnu; Paist, Aadu; Reinsalu, Enno; Undusk, Viktor; Uibopuu, Lembit; Pirrus, Enn-Aavo2018 http://www.ester.ee/record=b4766228*est TTÜ õppekavad uuenevad : [peamiselt muudatustest energeetikateaduskonnas]Lehtla, TõnuElektriala2009 / 5, lk. 16-17 Tugevvoolu elektrotehnikute kokkutulekLaugis, Juhan; Lehtla, Tõnu; Risthein, EndelEnergia Teataja = Энерговестник1995 / lk. 25-28, 56-58: ill https://www.ester.ee/record=b1072156*est Tööstusrobot PM-01Lehtla, TõnuTehnika ja Tootmine1988 / lk. 19-22 https://www.ester.ee/record=b1073047*est Tööstusrobot ТУР-10Lehtla, TõnuTehnika ja Tootmine1985 / lk. 10-12 : ill https://www.ester.ee/record=b1073047*est TööstusrobotidTiismus, Hugo; Lehtla, TõnuTehnika ja Tootmine1982 / lk. 9-12 https://www.ester.ee/record=b1073047*est Tööstusrobotid : ajamid ja nende elemendidTiismus, Hugo; Lehtla, Tõnu1987 https://www.ester.ee/record=b1263046*est Tööstusrobotid : otstarve ja ehitusLehtla, Tõnu1985 https://www.ester.ee/record=b1233814*est Tühjad ümbrised madalpinge lülitus- ja juhtaparaadikoostetele : üldnõuded = Empty enclosures for low-voltage switchgear and controlgear assemblies : general requirements (IEC 62208:2023)2023 https://www.ester.ee/record=b5641220*est Ultracapacitors as an innovative teaching topic in Tallinn University of Technology [Electronic resource]Roasto, Indrek; Vinnikov, Dmitri; Lehtla, Tõnu19th International Symposium on Power Electronics, Electrical Drives, Automation and Motion : Speedam 2008 : Ischia (Italy), June 11th-13th, 2008 : conference proceedings2008 / p. 475-480 : ill. [CD-ROM] Use of interactive modelling in the field of energy savingLiivik, Liisa; Jansikene, Raik; Lehtla, Tõnu3rd International Scientific Workshop "Compatibility in Power Electronics" (CPE 2003) : Gdansk-Zielona Gora, Poland, 28-30 May, 20032003 / p. 64-66 Using of industry automation software and hardware in education and trainingRosin, Argo; Laugis, Juhan; Lehtla, TõnuCAx Techniques : proceedings of the 4th International Scientific Colloquium : Bielefeld, Germany, September 13-15, 19991999 / p. 119-124 : ill Uued suunad elektriajamitehnikasLehtla, TõnuElektriala2003 / 5, lk. 25 Valuroboti mikroprotsessorjuhtimisega manipulaatori uurimine : elektriseadmed : magistritööKulmar, Lembit1992 https://www.ester.ee/record=b2630339*est Ways to reduce switching losses in motor drive invertersVodovozov, Valery; Lehtla, Tõnu10th International Symposium "Topical Problems in the Field of Electrical and Power Engineering". Doctoral School of Energy and Geotechnology II : Pärnu, Estonia, January 10-15, 20112011 / p. 3-9 : ill Õpetaja kogu eluksLehtla, TõnuElektriala2021 / lk. 27-28 https://www.ester.ee/record=b1240496*est Õpisituatsioonid mehhatroonikas ja robootikasKremer, Martina; Seiler, Sven; Kuvaja, Markus; Lehtla, Tõnu; Pikner, Heiko; Sell, Raivo2013 http://www.ester.ee/record=b3004886*est Ülevaade mehhatroonikaümarlauastLehtla, Tõnu; Teemets, RaivoElektriala2001 / 3, lk. 10 Ülikooli perestroika : variant 2 ehk tõeline ümberrivistumineLehtla, TõnuMente et Manu2016 / lk. 6-8 : ill Ülikoolist, teadusest, leiutamisest...Lehtla, TõnuMente et Manu2006 / 5. okt., lk. 1. (Avaveerg) https://www.ester.ee/record=b1242496*est Ümbristega tagatavad kaitseastmed (IP-kood)Karro, Hans; Risthein, Endel; Mae, Mart; Lehtla, Tõnu2001 https://www.ester.ee/record=b1541776*est Гидромеханические переходные процессы идеализированной модели МГД-приводаLehtla, Tõnu; Sakkos, HeinarАвтоматизированные магнитогидродинамические и линейные электроприводы и их элементы1981 / с. 87-96 Исследование и проектирование электромагнитных средств перемещения жидких металлов : сборник трудовKesküla, Viktor; Voldek, Aleksander; Veske, Toivo; Valdur, Lembit; Reimal, Lembit; Vallaste, Eino; Tergem, Ilmar; Kilk, Aleksander; Lehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, Raivo; Laugis, Juhan; Roninson, Aleksander1978 https://www.ester.ee/record=b1409159*est Исследование и проектирование электромагнитных средств перемещения жидких металлов : сборник трудовVeske, Toivo; Loigom, Villem; Sakkos, Heinar; Tiismus, Hugo; Irs, Rein; Tomson, Jaan; Hansberg, Vello; Laugis, Juhan; Lehtla, Tõnu; Teemets, Raivo; Budig, P.-K.; Kronberg, M.; Timmel, H.; Arusoo, Andres; Risthein, Endel; Kesküla, Viktor; Tergem, Ilmar1979 https://www.ester.ee/record=b2100649*est Исследование магнитогидродинамического (МГД)-привода в дозаторном режиме : автореферат ... кандидата технических наук (05.09.03)Lehtla, Tõnu1975 https://www.ester.ee/record=b1322410*est Исследование МГД-дозатора с управлением по интегралу расходаLehtla, Tõnu; Tiismus, HugoСовещание по магнитной гидродинамике : [тезисы докладов седьмого совещания. Вып.] 3, Применение МГД в металлургии1972 / с. 135-137 https://www.ester.ee/record=b2665481*est Исследование переходных процессов индукционного насосаLehtla, Tõnu; Tiismus, HugoXVI студенческая научно-техническая конференция вузов Прибалтики, Белорусской ССР и Калининградской области, посвященная 100-летию со дня рождения В. И. Ленина : 20-25 апреля 1970 г. : (тезисы докладов). Электротехника и энергетика1970 / с. 8-9 https://www.ester.ee/record=b1379483*est Исследование электромеханических переходных процессов линейного электроприводаKarafin, L.; Lehtla, Tõnu; Roosimaa, ToivoТезисы докладов всесоюзной научно-технической конференции "Динамические режимы работы электрических машин и электроприводов", 12-15 октября 1982 г1982 / с. 172 К расчету внутренней гидромеханической характеристики МГД-приводаLehtla, Tõnu; Tiismus, Hugo; Sakkos, Heinar; Saks, K.Тезисы докладов восьмого Рижского совещания по магнитной гидродинамике. 2, МГД - машины1975 / с. 179-181 https://www.ester.ee/record=b2550896*est К расчету внутренних гидромеханических характеристик линейных индукционных МГД-двигателей с боковыми шинамиLehtla, Tõnu; Tiismus, HugoЭлектротехническая промышленность. Электропривод : реферативный научно-технический сборник1976 / с. 3-5 : ил https://www.ester.ee/record=b2896285*est К расчету механических характеристик индукционных МГД-насосовLehtla, Tõnu; Sakkos, Heinar; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник статей. 121975 / с. 49-59 : илл https://www.ester.ee/record=b2100178*est https://digikogu.taltech.ee/et/Item/08e6ff58-4252-400a-93ef-d04fd47cfc8d К технике - через технику должен лежать путь завтрашнего инженераLehtla, TõnuСоветская молодёжь1984 / с. [?] Литейная карусельная машина с линейным электроприводомKask, Rein; Laugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, RaivoСеминар по прикладной магнитной гидродинамике : тезисы докладов1978 / с. [143-145] Литейная карусельная машина с линейным электроприводомKask, Rein; Laugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, RaivoСеминар по прикладной магнитной гидродинамике : тезисы докладов. Ч. 11978 / с. 143-145 МГД-привод как объект автоматического регулированияLaugis, Juhan; Lehtla, Tõnu; Loigom, Villem; Sakkos, Heinar; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник трудов. 91971 / с. 35-46 : илл https://www.ester.ee/record=b2100324*est https://digikogu.taltech.ee/et/Item/8bc46d44-cc4c-4e4b-9c42-86fb5e50d4fe/ МГД-привод с электромагнитным клапаномTiismus, Hugo; Laugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Karboinov, Aleksander; Musikka, Arvo; Mägi, Rein; Oorn, Arvo; Pettai, ElmoТезисы докладов школы-семинара "Применение магнитогидродинамических (МГД) и линейных электроприводов в системах гибкого автоматизированного литейного производства", 24-28 сентября 1984 года, Москва, ВДНХ1984 / с. 48-53 : ил https://www.ester.ee/record=b1283180*est Методы и оборудование для исследования автоматизированных МГД-приводовLaugis, Juhan; Lehtla, Tõnu; Loigom, Villem; Sakkos, HeinarСовещание по магнитной гидродинамике : [тезисы докладов седьмого совещания. Вып.] 3, Применение МГД в металлургии1972 / с. 127 https://www.ester.ee/record=b2665481*est Мир техники - мир людейLehtla, TõnuСоветская Эстония : орган ЦК Компартии Эстонии, Верховного Совета и Совета Министров Эстонской ССР1984 / с. [?] https://www.ester.ee/record=b1447330*est Надежность : методическое пособие. Часть 1, Надежность электрических аппаратов1989 https://www.ester.ee/record=b1212342*est Несимметричное тиристорное управление МГД-приводомLehtla, Tõnu; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник статей. 121975 / с. 75-81 : илл https://www.ester.ee/record=b2100178*est https://digikogu.taltech.ee/et/Item/08e6ff58-4252-400a-93ef-d04fd47cfc8d Новая концепция подготовки инженерных и научных кадров в области автоматизированного электропривода в ЭстонииLaugis, Juhan; Lehtla, TõnuТезисы докладов I международной (XII всероссийской) конференции по автоматизированному электроприводу, 26-28 сентября 1995 г., Санкт-Петербург1995 / с. 134 О возможностях создания автоматизированных МГД-лозаторовLehtla, Tõnu; Tiismus, HugoСовещание по магнитной гидродинамике : [тезисы докладов седьмого совещания. Вып.] 3, Применение МГД в металлургии1972 / с. 133-134 https://www.ester.ee/record=b2665481*est О нововведениях в учебном процессе в Институте электропривода и силовой электроники Таллиннского технического университетаLehtla, Tõnu; Laugis, Juhan; Vinnikov, DmitriТехнiчна електродинамiка2005 / 2, с. 100-103 О подготовке электроприводчиков в ЭстонииLaugis, Juhan; Lehtla, Tõnu2nd International (13th All-Russian) Conference on Automatic Electric Drive : AED-98 : Uljanovsk, 23.09.-25.09.19981998 / [3] p О результатах многолетного сотрудничества института электропривода и силовой электроники Таллиннского технического университета с Таллиннским трамвайно-троллейбусным объединениемVinnikov, Dmitri; Laugis, Juhan; Lehtla, Tõnu; Egorov, MikhailМатериалы Международной конференции : Международное сотрудничество в образовании и науке : Санкт-Петербург, 2-6 июня 2008 года = Proceedings of the International Conference : International Education and Science Cooperation : Saint-Petersburg, June 2-6, 2008 : IESC-20082008 / с. 271-279 : ил Определение расчетной модели линейного электропривода с дискретной вторичной системойLehtla, Tõnu; Teemets, Raivo; Laugis, JuhanИсследование и проектирование электромагнитных средств перемещения жидких металлов. 161980 / с. 35-43 Опытная МГД-установка на жидком алюминииTiismus, Hugo; Laugis, Juhan; Loigom, Villem; Tomson, Jaan; Irs, Rein; Tarma, Mati; Lehtla, Tõnu; Sakkos, Heinar; Arusoo, Andres; Oorn, Arvo; Pettai, ElmoВсесоюзный симпозиум по автоматизированному линейному и магнитогидродинамическому электроприводу : тезисы докладов1981 / с. 72-74 https://www.ester.ee/record=b1312096*est Организация специализации и учебного процесса по робототехникеTiismus, Hugo; Lehtla, TõnuОпыт Таллинского политехнического института в организации учебно-воспитательной и научно-исследовательской работы : тезисы докладов Всесоюзного семинара1986 / с. 36-38 https://www.ester.ee/record=b1211339*est Особенности расчета двухцелевого линейного электроприводаLaugis, Juhan; Lehtla, Tõnu; Teemets, RaivoИсследование и проектирование электромагнитных средств перемещения жидких металлов. 161980 / с. 27-34 Переходные процессы МГД-приводаLaugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Oorn, Arvo; Pettai, ElmoВсесоюзный симпозиум по автоматизированному линейному и магнитогидродинамическому электроприводу : тезисы докладов1981 / с. 71-72 https://www.ester.ee/record=b1312096*est Переходные процессы МГД-приводаLaugis, Juhan; Lehtla, Tõnu; Oorn, Arvo; Sakkos, HeinarАвтоматизированные магнитогидродинамические и линейные электроприводы и их элементы1981 / с. 65-75 Применение метода фазовых траекторий для расчета процесса МГД-дозированияLehtla, Tõnu; Sakkos, HeinarДевятое Рижское совещание по магнитной гидродинамике : Тезисы докладов. 3 : МГД - технология и устройства1978 / с. 147-148 Применение микроконтроллера MSP430 в качестве тренировочного микропроцессорного устройстваGalkin, Ilja; Skarainis, M.; Laugis, Juhan; Lehtla, TõnuТехнiчна електродинамiка2005 / 2, с. 90-93 : ил Принципы реконструкции системы управления микроклиматомKamenev, Miroslav; Lehtla, TõnuActual Problems of Electrical Drives and Industry Automation : the research symposium of young scientists : Tallinn, Estonia, May 31 - June 5, 19991999 / p. 77-80: ill Программа, методические указания и контрольные задания по курсу Теория электропривода : для студентов-заочников специальности "Электропривод и автоматизация промышленных установок"1980 https://www.ester.ee/record=b2639426*est Программа, методические указания и контрольные задания по курсу "Теория электропривода" для студентов-заочников специальности "Электропривод и автоматизация промышленных установок"1979 https://www.ester.ee/record=b3538467*est Программа, методические указания и контрольные задания по курсу "Теория электропривода" для студентов-заочников специальности "Электропривод и автоматизация промышленных установок"1979 https://www.ester.ee/record=b3538467*est Программируемый контроллер ГРАНИТ 02-03 : описание конструкций и принципа работы1989 https://www.ester.ee/record=b1231120*est Промышленный робот ТУР-10 : методическое пособие к лабораторным работам для студентов специальности 06281987 https://www.ester.ee/record=b1273285*est Промышленный робот Универсал-5 : методическое пособие для студентов специальности 06281982 https://www.ester.ee/record=b1265857*est Резултаты пробной эксплуатации линейной карусельной машиныKask, Rein; Laugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, RaivoСеминар по прикладной магнитной гидродинамике : тезисы докладов1978 / с. [3] Результаты продной эксплуатации литейной карусельной машиныKask, Rein; Laugis, Juhan; Lehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, RaivoСеминар по прикладной магнитной гидродинамике : тезисы докладов. Ч. 21978 / с. [?] Система управления манипуляторомLehtla, Tõnu; Roosimaa, Toivo; Evart, P.XXV студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 21-23 апреля 1981 года : тезисы докладов. Том 2, Автоматика. Энергетика. Механика. Химия1981 / с. 82 https://www.ester.ee/record=b1322629*est Состояние и тенденции развития электротранспорта в ЭстонииLaugis, Juhan; Lehtla, Tõnu; Vinnikov, Dmitri; Boiko, VitaliТруды III международной (XIV всероссийской) конференции по автоматизированному электроприводу : Нижний Новгород, 12-14 сентября 20012001 / с. 243-245 Студенты. Как их учить?Lehtla, TõnuСоветская Эстония : орган ЦК Компартии Эстонии, Верховного Совета и Совета Министров Эстонской ССР1982 / с. [?] https://www.ester.ee/record=b1447330*est Типовые характеристики для расчета переходных процессов подачи насосных МГД-приводовLehtla, Tõnu; Sakkos, Heinar; Tiismus, Hugo; Teemets, RaivoИсследование и проектирование электромагнитных средств перемещения жидких металлов. 151978 / с. 67-74 Тиристорные регуляторы для питания МГД-двигателейLehtla, Tõnu; Pettai, Elmo; Reivik, Aivar; Sõnajalg, A.Тезисы докладов школы-семинара "Применение магнитогидродинамических (МГД) и линейных электроприводов в системах гибкого автоматизированного литейного производства", 24-28 сентября 1984 года, Москва, ВДНХ1984 / с. 65-68 : ил https://www.ester.ee/record=b1283180*est Тиристорный МГД-привод для перекачивания жидкого магнияArusoo, Andres; Laugis, Juhan; Lehtla, Tõnu; Loigom, Villem; Sakkos, Heinar; Šilf, K.; Tiismus, HugoСовещание по магнитной гидродинамике : [тезисы докладов седьмого совещания. Вып.] 3, Применение МГД в металлургии1972 / с. 122-124 https://www.ester.ee/record=b2665481*est Улучшение конструкции и способа градуировки кондукционных преобразователей скорости течения жидких металловIrs, Rein; Lehtla, Tõnu; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник трудов. 111974 / с. 73-85 : илл https://www.ester.ee/record=b2100319*est https://digikogu.taltech.ee/et/Item/e4a28dda-447a-4efc-a3bf-2d868e162d8d Управление двухзвенным манипулятором с переменной нагрузкой при наличии трения в шарнирахKulmar, Lembit; Lehtla, Tõnu; Tiismus, HugoТезисы докладов семинара "Новые направления научных исследований в области электромеханики"1991 / с. 29-33: ил Управление приводами литейного роботаKulmar, Lembit; Lehtla, Tõnu; Tiismus, HugoТезисы докладов семинара "Новые разновидности электропривода и возможности их применения"1990 / с. 107-108 Управление технологическим комплексом для резки титановых заготовокRoosimaa, Toivo; Lehtla, TõnuГибкие автоматизированные производственные системы и их элементы для литейного производства1986 / с. 63-70 Уравнения движения вторичной среды линейных и МГД-электроприводовLaugis, Juhan; Lehtla, Tõnu; Sakkos, HeinarВсесоюзный симпозиум по автоматизированному линейному и магнитогидродинамическому электроприводу : тезисы докладов1981 / с. 70 https://www.ester.ee/record=b1312096*est Уравнения движения МГД-приводаSakkos, Heinar; Lehtla, Tõnu; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник статей. 121975 / с. 61-73 https://www.ester.ee/record=b2100178*est https://digikogu.taltech.ee/et/Item/08e6ff58-4252-400a-93ef-d04fd47cfc8d Устройство для плавного включения электрической нагрузкиLehtla, Tõnu; Sakkos, HeinarИсследование электромашинных и электромагнитных устройств управления и контроля специального назначения1989 / с. 96-104 Устройство для разделения проката. Авторское свидетельство № 1234073Laugis, Juhan; Lehtla, Tõnu; Oorn, Arvo; Roosimaa, Toivo; Sakkos, HeinarБюллетень изобретений1986 / с. [?] Экспериментальные исследования опытной МГД-установки и ее элементовTiismus, Hugo; Laugis, Juhan; Loigom, Villem; Tomson, Jaan; Irs, Rein; Tarma, Mati; Lehtla, Tõnu; Sakkos, Heinar; Arusoo, Andres; Oorn, Arvo; Pettai, ElmoВсесоюзный симпозиум по автоматизированному линейному и магнитогидродинамическому электроприводу : тезисы докладов1981 / с. 75-76 https://www.ester.ee/record=b1312096*est Экспериментальный магнитогидродинамический (МГД) дозатор жидкого металла с дозированием по интегралу расходаAfonin, I.; Lehtla, Tõnu; Tiismus, HugoИсследование и проектирование электромагнитных средств перемещения жидких металлов : сборник трудов. 101973 / с. 123-131 : илл https://www.ester.ee/record=b2100340*est https://digikogu.taltech.ee/et/Item/3679d56d-2e5b-40d9-8ecf-23936b94edb5 Электрические аппараты : пособие к лабораторным работам для студентов специальности 0628 и 06011982 https://www.ester.ee/record=b1264696*est Электрические аппараты защиты : методическое пособие для студентов изучающих курс "Электрические аппараты"1987 https://www.ester.ee/record=b1261084*est Электрические аппараты защиты : методическое пособие для студентов, изучающих курс "Электрические аппараты" (специальность 0601) и курс "Электрические аппараты и средства автоматизации" (специальность 0628)1981 https://www.ester.ee/record=b1319138*est ЭлектромеханикаVõrk, Rein; Janson, Kuno; Tellinen, Juhan; Reiner, Ardi; Järvik, Jaan; Pool, Ain-Matt; Vladislavlev, Mihhail; Veiler, Helmuth; Kõiv, Ants-Kaspar; Mežburd, Volf; Lehtla, Tõnu; Sakkos, Heinar; Kulmar, Lembit1989 https://www.ester.ee/record=b1275616*est ЭлектроприводPuusepp, Eugen; Tiismus, Hugo; Sokolov, M.M.; Sorokin, L.K.; Baibakov, S.N.; Sokolov, J.D.; Katsen, A.L.; Nagornjuk, V.M.; Sarvarov, A.S.; Šinjanski, A.V.; Mežburd, Volf; Laugis, Juhan; Lehtla, Tõnu; Oorn, Arvo; Sakkos, Heinar; Loigom, Villem; Tomson, Jaan; Arusoo, Andres; Pettai, Elmo; Tuldava, Toomas; Thalfeldt, J.; Laikmaa, Enn; Kesküla, Viktor; Kilk, Aleksander1981 https://www.ester.ee/record=b1319072*est ЭлектроприводLahtmets, Rain; Tiismus, Hugo; Laugis, Juhan; Teemets, Raivo; Oorn, Arvo; Loigom, Villem; Sakkos, Heinar; Tomson, Jaan; Roosimaa, Toivo; Lehtla, Tõnu; Kesküla, Viktor; Kilk, Aleksander; Külm, Evald; Risthein, Endel1986 https://www.ester.ee/record=b1296527*est