Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
modelling (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
51
Vaata veel..
(5/702)
Ekspordi
ekspordi kõik päringu tulemused
(51)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
nimi kasvavalt
nimi kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
A review on energy piles design, sizing and modelling
Fadejev, Jevgeni
;
Simson, Raimo
;
Kurnitski, Jarek
;
Haghighat, Fariborz
Energy
2017
/
p. 390-407 : ill
https://doi.org/10.1016/j.energy.2017.01.097
artikkel ajakirjas
2
Active learning in computer exercises on electronics
Raud, Zoja
;
Vodovozov, Valery
World Academy of Science, Engineering and Technology. International journal of electrical, computer, electronics and communication engineering
2014
/
p. 1061-1066 : ill
artikkel ajakirjas
3
Adjusted electrical equivalent circuit model of induction motor with broken rotor bars and eccentricity faults
Petrov, Aleksei
;
Plokhov, Igor
;
Rassõlkin, Anton
;
Vaimann, Toomas
;
Kallaste, Ants
;
Belahcen, Anouar
Proceeding of the 2017 IEEE 11th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED) : [Tinos (Greece), August 29 - September 01, 2017]
2017
/
p. 58-64 : ill
https://doi.org/10.1109/DEMPED.2017.8062334
artikkel kogumikus
4
Advances in characteristics analysis, measurement methods and modelling of flow dynamics in airlift reactors
Zhang, Tao
;
Wei, Chaohai
;
Feng, Chunhua
;
Preis, Sergei
Chemical engineering and processing : process intensification
2019
/
art. 107633, 19 p. : ill
https://doi.org/10.1016/j.cep.2019.107633
artikkel ajakirjas
5
Applicability of spiral drawing test for mental fatigue modelling
Senkiv, Olesja
;
Nõmm, Sven
;
Toomela, Aaro
IFAC-PapersOnLine
2019
/
p. 190-195 : ill
https://doi.org/10.1016/j.ifacol.2019.01.064
artikkel ajakirjas
6
Automation of chemical plant modelling
Aarna, Olav
Automatica
1980
/
p. 649-661
https://www.ester.ee/record=b1199422*est
https://doi.org/10.1016/0005-1098(80)90007-2
artikkel ajakirjas
7
Cd2+ and Zn2+ sorption on apatite in the presence of EDTA and humic substance
https://doi.org/10.1051/e3sconf/20130101008
artikkel kogumikus
8
Cd2+ and Zn2+ sorption on apatite in the presence of EDTA and humic substance
Viipsi, Karin
;
Sjöberg, Staffan
;
Tõnsuaadu, Kaia
;
Shchukarev, Andrey
Proceedings of the 16th International Conference on Heavy Metals in the Environment : Rome, Italy, September 23-27, 2012
2013
/
p. 01008-p.1-01008-p.4 : ill
artikkel kogumikus
9
Comparative analysis of electric drives met for vehicle propulsion
Vodovozov, Valery
;
Raud, Zoja
;
Lehtla, Tõnu
;
Rassõlkin, Anton
;
Lillo, Nikolai
9th International Conference on Ecological Vehicles and Renewable Energies EVER 2014
2014
/
[8] p. : ill
artikkel kogumikus
10
Design of rotors for synchronous reluctance motor : analytical treatment and optimization
Orlova, Svetlana
;
Pugachov, Vladislav
;
Rassõlkin, Anton
;
Kallaste, Ants
;
Vaimann, Toomas
2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe), 3-5 Sept. 2019, Genova, Italy : proceedings
2019
/
9 p. : ill
https://doi.org/10.23919/EPE.2019.8914760
artikkel kogumikus
11
Determination and comparison of ash melting temperature of a biomass blend by laboratory methods and thermodynamic modelling
Link, Siim
;
Yrjas, Patrik
;
Lindberg, Daniel
;
Trikkel, Andres
28th European Biomass Conference and Exhibition : 6-9 July 2020 (Virtual), Marseille, France : proceedings
2020
/
p. 322-328
https://doi.org/10.5071/28thEUBCE2020-2BV.2.1
artikkel kogumikus
12
Development of supply chain integration model through application of analytic network process and bayesian network
Maleki, Meysam
;
Ševtšenko, Eduard
;
Cruz-Machado, Virgilio
International journal of integrated supply management
2013
/
p. 67-89
artikkel ajakirjas
13
Elutähtsate teenuste ristsõltuvuse analüüs
Laud, Peeter
;
Bahsi, Hayretdin
;
Lenin, Aleksandr
;
Mändmaa, Kalev
;
Priisalu, Jaan
;
Tuuling, Reedik
Sõjateadlane
2020
/
lk. 207-237
https://www.ester.ee/record=b4555087*est
artikkel ajakirjas
14
Evaluating a novel agile requirements engineering method : a case study
Tenso, Tanel
;
Norta, Alexander
;
Vorontsova, Irina
ENASE 2016 : 11th International Conference on Evaluation of Novel Software Approaches to Software Engineering : proceedings : Rome, Italy, 27-28 April 2016
2016
/
p. 156-163 : ill
http://dx.doi.org/10.5220/0005829701560163
artikkel kogumikus
15
Flow, waves and water exchange in the Suur Strait, the Gulf of Riga in 2008
Raudsepp, Urmas
;
Laanemets, Jaan
;
Haran, Getli
;
Alari, Victor
;
Pavelson, Juss
;
Kõuts, Tarmo
Oceanologia
2011
/
p. 35-56 : ill
artikkel ajakirjas
16
FSMD RTL design manipulation for clock interface abstraction
Abrar, Syed Saif
;
Jenihhin, Maksim
;
Raik, Jaan
2015 International Conference on Advances in Computing, Communications and Informatics (ICACCI) : 10-13 August 2015, Kerala, India
2015
/
p. 463-468 : ill
http://dx.doi.org/10.1109/ICACCI.2015.7275652
artikkel kogumikus
17
Fuzzy gradient control of electric vehicles at blended braking with volatile driving conditions
Vodovozov, Valery
;
Petlenkov, Eduard
;
Aksjonov, Andrei
;
Raud, Zoja
ICINCO 2020 : 17th International Conference on Informatics in Control, Automation and Robotics, July 7-9, 2020 : online
2020
/
p. 250−261
http://wikicfp.com/cfp/servlet/event.showcfp?eventid=97093©ownerid=45217
artikkel kogumikus
18
Hardware-in-the-loop simulator of a flow control system for centrifugal pumps
Gevorkov, Levon
;
Vodovozov, Valery
;
Lehtla, Tõnu
;
Raud, Zoja
2016 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) : proceedings : Opera Nova's Congress Center, Bydgoszcz, Poland, 29. June - 01. July, 2016
2016
/
p. 472-477 : ill
https://doi.org/10.1109/CPE.2016.7544234
artikkel kogumikus
19
Hardware-in-the-loop simulator of vessel electric propulsion drive
Vodovozov, Valery
;
Raud, Zoja
;
Bakman, Ilja
;
Lehtla, Tõnu
;
Gevorkov, Levon
2015 9th International Conference on Compatibility and Power Electronics (CPE) : proceedings : Faculty of Science and Technology (FCT), Caparica, Lisbon, Portugal, 24-26 June, 2015
2015
/
p. 425-430 : ill
http://dx.doi.org/10.1109/CPE.2015.7231113
artikkel kogumikus
20
How can agents help in designing complex systems?
Taveter, Kuldar
;
Meriste, Merik
Journal of telecommunication, electronic and computer engineering
2017
/
p. 1-8 : ill
http://journal.utem.edu.my/index.php/jtec/issue/view/140
artikkel ajakirjas
21
Improvement of automotive service management by means of computer simulation
Makarova, Irina
;
Pashkevich, Anton
;
Buyvol, Polina
;
Mavrin, Vadim
;
Abeshev, Kuanysh
;
Shubenkova, Ksenia
Transportation research procedia
2020
/
P. 160−167
https://doi.org/10.1016/j.trpro.2020.02.023
artikkel ajakirjas
22
Inverse-model intelligent control of fin-actuated underwater robots based on drag force propulsion
Remmas, Walid
;
Chemori, Ahmed
;
Kruusmaa, Maarja
Ocean Engineering
2021
/
art. 109883
https://doi.org/10.1016/j.oceaneng.2021.109883
artikkel ajakirjas
23
Mine water as a potential source of energy from underground mined areas in Estonian oil shale deposit
Karu, Veiko
;
Valgma, Ingo
;
Kolats, Margit
Oil shale
2013
/
p. 336-362 : ill
artikkel ajakirjas
24
Mixed pressure control system for a centrifugal pump
Gevorkov, Levon
;
Vodovozov, Valery
2017 11th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG 2017) : Cadiz, Spain, 4-6 April 2017
2017
/
p. 364-369 : ill
https://doi.org/10.1109/CPE.2017.7915198
artikkel kogumikus
25
Model for energy management of residential building heating system
Gevorkov, Levon
;
Šmidl, Vaclav
;
Sirovy, Martin
;
Rassõlkin, Anton
;
Kallaste, Ants
;
Vaimann, Toomas
2020 27th International Workshop on Electric Drives: MPEI Department of Electric Drives 90th Anniversary (IWED), Moscow, Russia, January 27-30, 2020
2020
/
4 p
https://doi.org/10.1109/IWED48848.2020.9069503
artikkel kogumikus
Kirjeid leitud 51, kuvan
1 - 25
eelmine
1
2
3
järgmine
pealkiri
456
1.
A class of rapidly convergent iterative methods for problems in mathematical modelling
2.
A comparative framework for cyber threat modelling : case of healthcare and industrial control systems
3.
A comparison of plug flow models in the modelling of three phase monolith reactors
4.
A framework for modelling, verification and transformation of concurrent imperative programs
5.
A method of conceptual modelling for realistic training scenarios
6.
A methodology for modelling of modifications in multifunctionalhuman organisations
7.
A methodology for modelling traffic related carbon monoxide emissions in suburban areas
8.
A multilevel modelling environment for machine elements design
9.
A multi-perspective methodology for agent-oriented business modelling and simulation
10.
A new approach to mathematical modelling of metal cutting process characteristics
11.
A parametric framework for modelling of bioelectrical signals
12.
A parametric framework for modelling of bioelectrical signals = Parameetriline raamistik bioelektriliste signaalide modelleerimiseks
13.
A reliability study of wave climate modelling in the Baltic Sea
14.
A review on energy piles design, sizing and modelling
15.
A spectral modelling of the gravitational contribution of the far-zone topography
16.
A Synthetic, Hierarchical Approach for Modelling and Managing Complex Systems’ Quality and Reliability = Sünteetiline, hierarhiline lähenemine keerukate süsteemide kvaliteedi ja töökindluse modelleerimiseks ja haldamisek
17.
A textual domain specific language for user interface modelling
18.
About mathematical modelling of the metal cutting process
19.
Accuracy assessment of RTK-GNSS equipped UAV conducted as-built surveys for construction site modelling
20.
Achieving accuracy in charge carrier mobility modelling in silicon
21.
Advances in characteristics analysis, measurement methods and modelling of flow dynamics in airlift reactors
22.
Agent-oriented enterprise modelling based on business rules
23.
Agent-oriented modelling for simulation of complex environments
24.
Agent-oriented modelling for tabletop military training exercises
25.
Agentorienteeritud modelleerimise kunst : sõnavõtt Leon Sterlingi ja Kuldar Taveteri monograafia "The art of agent-oriented modelling" esitlusel 27. oktoobril 2009 TTÜ Raamatukogus
26.
An approach to the modelling of electrical machines
27.
An iterative approach for near-coast Marine Geoid Modelling and sea level analysis using satellite altimetry, in-situ and modeled data
28.
An overview of the impedance models of the thorax and the origin of the impedance cardiography signal for modelling of the impedance signals
29.
Analysis of modelling electric transportation networks
30.
Analysis of passive architectural roof cooling potential to decrease the cooling demand for Northern European Office buildings based on energy modelling and laboratory tests
31.
Analysis of the current Estonian energy situation and its modelling for developing future forecasts using energy planning models
32.
Analytical modelling and prediction formulas for domestic hot water consumption in residential Finnish apartments
33.
Analytical modelling of synchronous reluctance motor including non-linear magnetic condition
34.
Applicability of spiral drawing test for mental fatigue modelling
35.
Application of modelling tools in Estonian oil shale mining area
36.
Archetypes based techniques for modelling of business domains, requirements and software
37.
Artificial lateral line for aquatic habitat modelling: An example for Lefua echigonia
38.
Automated XML-based test modelling for mixed-signal circuits
39.
Automation of chemical plant modelling
40.
Bifurcation structure of a periodically driven nerve pulse equation modelling cardiac contraction
41.
Bio-impedance FDM-modelling inside heart for application in implanted devices
42.
Building information modelling (BIM) - enabled construction education : teaching project cash flow concepts
43.
Business domain modelling with business archetypes and archetype patterns
44.
Business rules' approach to the modelling, design, and implementation of agent-oriented information systems
45.
CAD problem solving and technical systems modelling using the AI programming environments
46.
Calcium carbonate precipitation : modelling of reaction kinetics in tubular reactor
47.
Capillary condensation experiment for inverse modelling of porous building materials
48.
Case studies of the proposed modelling and simulation methodology
49.
CFD modelling of single crystal growth of potassium dihydrogen phosphate (KDP) from binary water-solution at 30 C
50.
CFD modelling of solid-liquid suspension flow in a horizontal pipe [Elctronic resource]
51.
CFD modelling of the tubular air preheater in boiler firing oil shale
52.
CFD-PBM modelling of agglomeration and deposition in petroleum industry [Electronic resource]
53.
Characterisation and modelling of erosion wear of powder composite materials and coatings
54.
Characterization and modelling of erosion wear of powder composite materials and coatings
55.
Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings [Electronic resource]
56.
Chirp pulse excitation in the impedance spectroscopy of dynamic subjects - signal modelling in time and frequency domain
57.
CoCo-SIM : object-oriented multi-pole modelling and simulation environment for fluid power systems. Part 1, Fundamentals
58.
CoCo-SIM : object-oriented multi-pole modelling and simulation environment for fluid power systems. Part 2, Modelling and simulation of hydraulic-mechanical load-sensing system
59.
Combining conceptual modelling and formal methods to design control systems
60.
Communication bus between 3D modelling and process planning utilising step standard AP244
61.
Communication modelling and synthesis for NoC-based systems with real-time constraints
62.
Comparative analysis of HVAC cable metallic sheath modelling approaches for network studies
63.
Comparing rock shape models in grounding damage modelling
64.
Comparing the modelling power of Petri nets and Q-models
65.
Comparison of different physiological parameters for heart rate modelling in rate adaptive cardiac pacing
66.
Comparison of energy modelling and laboratory tests on green roof potential to decrease the cooling demand for North European office buildings
67.
Comparison of methods applied for Marine Geoid Modelling in the Baltic Sea project FAMOS
68.
Component-based mechatronics modelling methodology
69.
Computer algebra tools for modelling, analysis and synthesis for nonlinear control systems = Arvutialgebra vahendid mittelineaarsete juhtimissüsteemide modelleerimiseks, analüüsiks ja sünteesiks
70.
Computer modelling of airplane electro-hydraulic aileron position control
71.
Computer modelling of hydraulic systems using the NUT language and programming environment
72.
Computer modelling of intracardiac electrical bioimpedance
73.
Computer-aided modelling the production operation
74.
Conceptual design framework supported by dimensional analysis and System Modelling Language
75.
Conceptualising building information modelling for construction education
76.
Control and modelling of rehabilitation process of human leg joints
77.
Coupled wave-equation and eddy-current model for modelling and measuring propagating stress-waves
78.
Criteria for modelling wave phenomena in complex systems : the case of signals in nerves
79.
Day-ahead market modelling of large-scale highly-renewable multi-energy systems
80.
Design and modelling of electric drive in database environment [Electronic resource]
81.
Design management as a domain of smart and sustainable enterprise : business modelling for innovation and smart growth in Industry 4.0
82.
Design of a hydraulic-mechanical load-sensing system using object-oriented modelling and simulation
83.
Design of real-time systems using timed object modelling
84.
Designing adaptive multi-agent systems by agent-oriented modelling
85.
Designing proactive public services as sociotechnical systems by using agent-oriented modelling
86.
Determination and comparison of ash melting temperature of a biomass blend by laboratory methods and thermodynamic modelling
87.
Determining necessary length of the alternating series test for Parkinson's disease modelling
88.
Developing gravity model for airline regional route modelling
89.
Development and optimisation of modelling methods and algorithms for terahertz range radiation sources based on quantum well heterostructures = Kvantaukudega heterostruktuuridel põhinevate terahertskiirgurite modelleerim
90.
Development of cyber-physical production systems based on modelling technologies
91.
Development of the modelling tool for the analysis of the production process and its entities for SME
92.
Diagnostic modelling of digital systems with binary and high-level decision diagrams
93.
Diagnostic modelling of digital systems with decision diagrams
94.
Diagnostic modelling of digital systems with multi-level decision diagrams
95.
Discrete and continuous modelling of suspension bridges
96.
Distinct element modelling of the stability of the cavern in the Maardu granite deposit
97.
Driven oscillators for modelling cardiac phenomena
98.
Driven oscillators in modelling of heart dynamics
99.
Dynamic modelling of a turbo-prop aircraft using the U-vector expansion method
100.
Effect of freezing and thawing on the performance of “capillary active” insulation systems: a comparison of results from climate chamber study to HAM modelling
101.
Effect of water on the hydrogen bond formation in Estonian kukersite kerogen as revealed by molecular modelling
102.
Effect of weld modelling on crashworthiness optimization
103.
EJC2005 : proceedings of the 15th European-Japanese Conference on Information Modelling and Knowledge Bases : May 16-19, 2005, Tallinn
104.
Elastic wave propagation in periodical one-dimensional problems: Accurate finite element modelling
105.
Elucidation of metabolism network of mammalian cell line K562 using 2-14 C glucose label and stoichiometric modelling
106.
Empirical modelling of cake washing in a pressure filter
107.
Empirical modelling of the Estonian foreign trade
108.
End-user electricity consumption modelling for power quality analysis in residential building
109.
End-user electricity consumption modelling for power quality analysis of residential buildings
110.
Engineering-geological modelling of the Sillamäe radioactive tailings pond area = Sillamäe radioaktiivsete jäätmete hoidla territooriumi insener-geoloogiline modelleerimine
111.
Enhancing object modelling technique with timing analysis capabilities
112.
Estimation of agent-based modelling for cross-border infrastructure policy decision [Electronic resource]
113.
Estimation of water residence time in rivers for large scale hydrochemical modelling
114.
Estonian energy system and emissions modelling using markal model
115.
Estonian national road network and maintenance financing - needs, modelling and suggestions
116.
Eulerian-Eulerian modelling of particle-laden two-phase flow
117.
Eutrophication of Lake Peipsi. Modelling nutrient loads and response in river and estuary systems
118.
Evaluating the state of the art of photovoltaic performance modelling in Europe
119.
Evaluations for improving web systems on the basis of users behaviour modelling
120.
Event participant modelling with neural networks
121.
Experimental and analytical modelling of pelvic motion = Vaagna liikumise eksperimentaalne ja analüütiline modelleerimine
122.
Experimental and analytical modelling study of water-front dynamics of two-phase unsteady flows in a large-scale pressurized pipeline
123.
Experimental and Numerical Modelling of Stratified Exchange Flows and Blocking over a Submerged Sill
124.
Experimental evaluation and numerical modelling of the quality of photovoltaic modules
125.
Experimental evaluation and numerical modelling residual stresses in glass panel
126.
Experiments in neural network inverse modelling based control for a class of nonlinear systems
127.
Fast modelling of oscillator transients
128.
FE modelling for product families
129.
Finite element modelling for the optimization of microheating in disposable molecular diagnostics
130.
Finite element modelling for the optimization of microheating in disposable molecular diagnostics [Electronic resource]
131.
Finite element modelling of cable networks with flexible supports
132.
Finite element modelling of the resistive heating of disposable molecular diagnostics devices
133.
FOMCONpy: Fractional-order modelling and control library for python
134.
Fuzzy modelling and control of fed-batch fermentation
135.
Gate-level modelling of NBTI-induced delays under process variations
136.
Generalization of network-on-chip communication modelling
137.
Generative reverse-modelling approach to hygrothermal material characterization
138.
Geometrical modelling techniques to develop a metal structure design space
139.
Harmonic current summation using probabilistic bivariate modelling = Vooluharmoonikute summeerimine rakendades kahe muutujaga tõenäosuslikku modelleerimist
140.
Heart bioimpedance 3D FDM modelling with anisotropic tissue properties
141.
High order iterative methods for problems in mathematical modelling
142.
Holocene quantitative pollen-based vegetation reconstructions in Europe for climate modelling: LandClim II [Online resource]
143.
Homological modelling of the electric circuits
144.
Hybrid FEA-simulink modelling of permanent magnet assisted synchronous reluctance motor with unbalanced magnet flux
145.
Hydraulic modelling of oil spill through submerged orifices in damaged ship hulls
146.
Hydraulic modelling of stratified bi-directional flow in a river mouth
147.
Hydraulic modelling of submerged oil spill including tanker hydrostatic overpressure
148.
Implementing domain-specific modelling languages and generators : GPCE 2005 tutorial : Tallinn, Estonia, 28 September 2005 : tutorial notes
149.
Improved sampling algorithm for stochastic modelling of random-wound electrical machines
150.
Improvement of work environment in SME-s through modelling the prevention of health risks caused by pollutants in the air
151.
Improvement of work environment through modelling the prevention of health risks focusing on indoor pollutants = Töökeskkonna parendamine tööruumi siseõhu saasteainete poolt põhjustatud terviseriskide hindamise kaudu
152.
Improving regional gravity field and geoid modelling by various use of global geopotential models [Online resource]
153.
Incremental sheet forming process modelling - limitation analysis
154.
Information exchange problem between 3D modelling and process planning modules
155.
Information modelling and knowledge bases XVII
156.
Information modelling and knowledge bases XXIII
157.
Informational modelling of a communication office
158.
Informational modelling of a communication office : a thesis ... for the degree of doctor of philosophy
159.
Informational modelling of FSM networks
160.
Integrated modelling, fault management, verification and reliable design environment for cyber-physical systems
161.
Interpretable quantitative description of the digital clock drawing test for Parkinson's disease modelling
162.
Inverse methods for computational simulations and optimization of erosion models in power plants : a numerical-sufactal nonlinear optimization of modelling
163.
Kinetic modelling of wet oxidation treated debarking water
164.
Kinetics and modelling of advanced oxidation of toxic and carcinogenic aromatic compounds
165.
Knowledge brokering on emissions modelling in Strategic Environmental Assessment of Estonian energy policy with special reference to the LEAP model
166.
Laboratory tests and modelling of mineral wool insulated steel sandwich panels
167.
LabTop - software for experimental design, modelling and visualisation
168.
Large area high quality interfaces to SiC substrates - technology and modelling
169.
Large signal models and monotonic phase signals for modelling of oscillators
170.
Laser scanning of built environment and landforms with spatial modelling applications = Laserskaneerimine ehitiste ja looduslike pinnavormide mõõdistamisel ning tulemuste modelleerimine
171.
Long term measurements and HAM modelling of an interior insulation solution for an office building in cold climate
172.
Long-term modelling of fly ash and radionuclide emissions as well as deposition fluxes due to the operation of large oil shale-fired power plants
173.
Manufacturing environment modelling in intelligent manufacturing systems
174.
Mathematical and physical modelling of atherosclerosis in terms of the alterations of the dynamic electrical impedance of the arteries
175.
Mathematical and physical modelling of dynamic electrical impedance = Dünaamilise impedantsi matemaatiline ja füüsikaline modelleerimine
176.
Mathematical and physical modelling of the dynamic electrical bioimpedance
177.
Mathematical and physical modelling of the dynamic electrical impedance both of a healthy neuron and one affected by Parkinson’s disease
178.
Mathematical and physical modelling of the dynamic electrical impedance of a neuron
179.
Mathematical and physical modelling of the dynamic electrical impedance of a tooth
180.
Mathematical and physical modelling of the dynamic fluidic impedance of arteries using electrical impedance equivalents
181.
Mathematical modelling and optimization of erosion and corrosion in tribology = Erosiooni ja korrosiooni matemaatiline modelleerimine ja optimeerimine triboloogias
182.
Mathematical modelling and simulation of ozonation processes in a downstream static mixer with sieve plates
183.
Mathematical modelling of solid rotor induction motor
184.
Mathematical modelling of the dynamic electrical impedance of a parallel RC circuit using a Wien bridge oscillator
185.
Mathematical modelling of the heartbeat
186.
Mathematical modelling of the interaction of an air jet and an elastic body
187.
Mathematical modelling of the motion of dust-laden gases in the freeboard of CFB using the two-fluid approach
188.
Mathematical modelling of three phase squirrel cage induction motor and related signal processing for fault diagnostics = Kolmefaasilise lühisrootoriga asünkroonmootori matemaatiline modelleerimine ning lähtuv rikkediagn
189.
Mathematical modelling of unsteady flow in long pipes
190.
Measurement based approach for residential customer stochastic current harmonic modelling = Mõõtmispõhine lähenemine olmetarbijate vooluharmoonikute juhusliku esinemise modelleerimiseks
191.
Method of linear approximation of COP for heat pumps and chillers based on thermodynamic modelling and off-design operation
192.
Microstructure control of titanium aluminides intermetallic by impact fused-forging modelling
193.
Mining and modelling web user engagement : a survey on academic sites for framework establishment [Electronic resource]
194.
Model verification for analysis of wind power impact to transient stability in isolated power system using combined relay protection and dynamics modelling approach
195.
Modelling 2D wave motion in microstructured solids
196.
Modelling a blended braking system of electric vehicles
197.
Modelling a new composite from a recycled GFRP
198.
Modelling advanced oxidation treatment of polycyclic aromatic hydrocarbons
199.
Modelling aggregated load with distributed generation by exponential load model
200.
Modelling and analysis of the acoustic-structural system of the heavy vehicle gearbox
201.
Modelling and estimation of distribution network operation
202.
Modelling and experimental characterisation of self-regulating resistive heating elements for disposable medical diagnostics devices
203.
Modelling and experimental characterisation of thermoelectric heating for molecular diagnostics devices
204.
Modelling and optimal design of sheet metal RPAMPM processes
205.
Modelling and optimal design of the incremental forming process
206.
Modelling and optimization of multi-level processing environment - discrete approach
207.
Modelling and reconstruction of impulsively started flows using vortex ring models
208.
Modelling and simulation of a hydraulic load-sensing system in the CoCoViLa environment
209.
Modelling and simulation of arterial blood pulsation via bioimpedance = Arteriaalse verepulsatsiooni modelleerimine ja simuleerimine bioimpedantsi kaudu
210.
Modelling and simulation of autonomous vehicles and systems and their advanced control methods = Autonoomsete sõidukite ja süsteemide ning nende täiustatud juhtimismetoodikate modelleerimine ja simuleerimine
211.
Modelling and simulation of fluid power systems in an intelligent programming environment
212.
Modelling and simulation of fluid power systems in object-oriented programming environment
213.
Modelling and simulation of human lower-limb motion
214.
Modelling and simulation of hydraulic load-sensing systems using object-oriented programming environment
215.
Modelling and simulation of steady-state conditions of a hydraulic load-sensing system
216.
Modelling and simulation of two-rate state-space models for stochastic multivariable continuous-time control systems
217.
Modelling and testing of the properties of recovered composite material
218.
Modelling anisotropy in non-oriented electrical steel sheet using vector Jiles-Atherton model
219.
Modelling conception of firm's economic activities
220.
Modelling construction process impact factors on degradation of thin rendered facades = Ehitusprotsessi mõjufaktorite modelleerimine õhekrohv fassaadide lagunemisel = Methode zur Bewertung der Relevanz von beeinflussende
221.
Modelling continuous process for precipitated calcium carbonate production from oil shale ash
222.
Modelling critical systems with timing constraints in Event-B [Electronic resource]
223.
Modelling diclofenac and ibuprofen residues in major Estonian seaside cities
224.
Modelling dynamics of 3-D surveillance system
225.
Modelling emergent behaviour of organisations : time-aware, UML and agent based approach = Ilmneva käitumise modelleerimine organisatsioonides : ajatundlik, UML ja agendipõhine lähenemine
226.
Modelling environmentally friendly fairways using Lagrangian trajectories : a case study for the Gulf of Finland, the Baltic Sea
227.
Modelling EVs in residential distribution grid with other nonlinear loads [Electronic resource]
228.
Modelling expenses for repair works
229.
Modelling FGM materials. An accurate function approximation algorithms
230.
Modelling framework for integration of large-scale heat pumps in district heating using low-temperature heat sources : A case study of Tallinn, Estonia
231.
Modelling non-linear systems by extended Fourier series
232.
Modelling non-stationary loads induced by changing climate : [plenary lecture]
233.
Modelling of a biologically inspired robotic fish driven by compliant parts
234.
Modelling of a carbon capture and storage system for the Latvian electricity sector
235.
Modelling of a versatile vehicle braking system with a fuzzy PID torque controller
236.
Modelling of abrasive wear and prognostication of erosion resistance of powder materials and coatings
237.
Modelling of advanced oxidation processes
238.
Modelling of an inductive sensor of the Foucault cardiogram
239.
Modelling of cardiac dynamics and intracardiac bioimpedance = Südame dünaamika ja südamesisese bioimpedantsi modelleerimine
240.
Modelling of charge carrier non-isothermal transport in silicon and silicon carbide
241.
Modelling of chlorophenol treatment in aqueous solutions. 1, Ozonation and ozonation combined with UV radiation under acidic conditions
242.
Modelling of chlorophenol treatment in aqueous solutions. 2, Ozonation under basic conditions
243.
Modelling of CO2 mass transfer and hydrodynamics in a semi-batch reactor
244.
Modelling of complex signals in nerves
245.
Modelling of confined vortex rings
246.
Modelling of consumption shares for small wind energy prosumers
247.
Modelling of control systems and optimal operation of power units in thermal power plants = Energiaplokkide juhtimissüsteemide modelleerimine ja talitluse optimeerimine soojuselektrijaamades
248.
Modelling of crystal growth of KDP in a 100dm3 suspension crystallizer using combination of CFD and multiblock model
249.
Modelling of crystal growth of KPD in a 100 dm3 crystallizer using combination of CFD and multiblock model
250.
Modelling of Cu2ZnSnSe4-CdS-ZnO thin film solar cell
251.
Modelling of decomposition and sulphation processes of oil shale carbonaceous part
252.
Modelling of distribution level coreless induction furnace for rapid voltage change assessment
253.
Modelling of dynamic electrical bioimpedance and measurements safety
254.
Modelling of electricity spot price and load forecast based new energy management system for households
255.
Modelling of energy recovery in electric vehicles for various braking scenarios on changing road surfaces
256.
Modelling of erosion wear of powder composite materials and coatings [Electronic resource]
257.
Modelling of exchange flow in horizontal channels with quadratic-shape cross sections : Pärnu river mouth case study
258.
Modelling of fast ozonation reactions in aqueous solutions
259.
Modelling of fine material movement in a disintegrator
260.
Modelling of fluid machines as sources of sound in duck and pipe systems
261.
Modelling of heart rate, based on measured physiological parameters for rate adaptive cardiac pacing
262.
Modelling of heart rhythms by methods of nonlinear dynamics
263.
Modelling of high frequency voltage transients of electrical motors
264.
Modelling of high-speed electrical railway system for transmission network voltage quality analysis : Rail Baltic case study
265.
Modelling of HVAC cable network for system studies
266.
Modelling of hydrogeological conditions in Estonian oil shale deposit - the case of dewatering a surface mine
267.
Modelling of impact-abrasive wear of ceramic, metallic, and composite materials
268.
Modelling of inhomogeneities of SiC Schottky interfaces
269.
Modelling of internal waves in the Baltic Sea
270.
Modelling of magnetic and electric circuits
271.
Modelling of metal alloy contacts to semiconductor substrate
272.
Modelling of multirate multivariable control systems : a state-space approach : thesis submitted to Tallinn Technical University in candidature for the degree of Doctor of Philosophy in Engineering
273.
Modelling of nitrogen concentrations in water from drained peat soils
274.
Modelling of nitrogen leaching from watersheds with large drained peat areas
275.
Modelling of nonholonomic dynamical system
276.
Modelling of oil shale concentration processes in Estonian mines
277.
Modelling of optimal vortex ring formation using the Stokes approximation
278.
Modelling of ozonation of EDTA in aqueous solutions in semicontinuous bubble columns - comparison: fundamental model vs. neural networks
279.
Modelling of oxidation rocet fuel polluted groundwater
280.
Modelling of processes in nerve fibres at the interface of physiology and mathematics
281.
Modelling of Seebeck coefficient influenced by carrier phonon drag and mixed scattering
282.
Modelling of sewer systems: a key to sustainable stormwater management
283.
Modelling of skewness measure distribution
284.
Modelling of solar-wind hybrid renewable energy system architectures
285.
Modelling of stormwater discharge and quality in urban area
286.
Modelling of structural damage and environmental consequences of tanker grounding
287.
Modelling of super-wide-band slow-wave structures
288.
Modelling of symmetry measurement uncertainty using Monte-Carlo method
289.
Modelling of the human knee joint supported by active orthosis
290.
Modelling of the influence of drained areas on the environment
291.
Modelling of the tunneling current in metal alloy contacts to 6H- and 4H-SiC substrates
292.
Modelling of the wastal waters pollution from agricultural vatershed
293.
Modelling of transients in IGBT inverter fed AC drives
294.
Modelling of unsteady hydrodynamic processes in pipes
295.
Modelling of water treatment by chemical oxidation
296.
Modelling of wave climate and sediment transport patterns at a tideless embayed beach, Pirita Beach, Estonia
297.
Modelling of wax actuators in underfloor heating manifolds
298.
Modelling of voltage transients on inverter fed AC induction motor
299.
Modelling oil shale mining space and processes
300.
Modelling ozone mass transfer and reaction kinetics of ozone selfdecomposition
301.
Modelling prediction of consumer demand in the tourism and hospitality based on time series
302.
Modelling regional airport terminal capacity
303.
Modelling residual stresses in glass structures
304.
Modelling risk of a collision between a LNG tanker and a harbour tug
305.
Modelling seawater chemistry of the East Baltic Basin in the late Ordovician - early Silurian
306.
Modelling SO2 capture by Estonian limestones and dolomites
307.
Modelling sound conflict management for virtual-enterprise collaboration
308.
Modelling spatial compositional data : reconstructions of past land cover and uncertainties
309.
Modelling spatial dispersion of contaminants from shipping lanes in the Baltic Sea
310.
Modelling stormwater runoff, quality, and pollutant loads in a large urban catchment
311.
Modelling terrorism expansion in a virtual world
312.
Modelling the air jet massage process
313.
Modelling the influence of climate change on mesoscale snow cover pattern in Estonia
314.
Modelling the influence of terraced landforms to the Earth’s gravity field
315.
Modelling the irradiated upper atmospheres of unevolved companions in precataclysmic binaries (PCB) : evidences on thermal instability
316.
Modelling the regional climate and isotopic composition of Svalbard precipitation using REMOiso : a comparison with available GNIP and ice core data
317.
Modelling the relationship of digital technologies with lean and agile strategies
318.
Modelling the technical–economic relevance of the ETICS construction process
319.
Modelling the time-varying risk premium by using the Kalman filter : the Euro money market case
320.
Modelling the trans-national technology transfer process
321.
Modelling tool for the analysis of the production process for SME
322.
Modelling transients in oscillator circuits
323.
Modelling transmission systems in energy system analysis : A comparative study
324.
Modelling, design and test of a bioimpedance measurement system with carrier compensation
325.
MPM4CPS : Multi-Paradigm Modelling for Cyber-Physical Systems
326.
Multi criterial modelling of oil shale mining fields : [poster]
327.
Multiagent modelling of a bacterial cell, a DnaA titration model based agent model as an example
328.
Multi-pole modelling and computing of steady-state characteristics of a four-way valve controlled hydraulic drive in NUT environment
329.
Multi-pole modelling and intelligent simulation environment for fluid power systems
330.
Multi-pole modelling and intelligent simulation of a fluid power feeding system with a pneumo-hydraulic accumulator
331.
Multi-pole modelling and simulation of a hydraulic mechanical load-sensing system using the CoCoViLa programming environment
332.
Multi-pole modelling and simulation of an electro-hydraulic servo-system with a non-linear regulator in NUT environment
333.
Multi-pole modelling and simulation of hydraulic chain elements
334.
Multi-pole modelling and simulation of hydraulic chain systems
335.
New approaches to modelling vortex rings and vortex ring-like structures
336.
New object-oriented approach of modelling mechatronics system in conceptual stage
337.
Nonlinear oscillations in modelling of heart dynamics
338.
Numerical modelling of a planing craft with a V-Shaped spray interceptor arrangement in calm water
339.
Numerical modelling of flow phenomenas of the lower furnace of the recovery boiler
340.
Numerical modelling of powder compaction
341.
Numerical modelling of the bottom gravity currentinan obstructedchannel with trapezoidalcross-section
342.
Numerical simulations of grounding scenarios–benchmark study on key parameters in FEM modelling
343.
Nutrition estimation of dialysis patients by on-line monitoring and kinetic modelling
344.
Office workstation modelling in the whole information system
345.
On mathematical modelling of solitary pulses in cylindrical biomembranes
346.
On modelling emerging behaviour of multifunctional non-profit organisations
347.
On modelling of wave propagation in microstructured solids
348.
On modelling the deformation of elastic body under air pressure
349.
On modelling wave motion in microstructured solids
350.
On parameterization of emulsification and heat exchange in the hydraulic modelling of oil spill from a damaged tanker in winter conditions
351.
On some optimal design techniques for modelling structural degradation
352.
On the influence of modelling a weld effect when optimizing thin-walled structures for crashworthiness
353.
On the modelling of fluid machines as acoustic N-port sources
354.
On the modelling of stress-relaxation behaviour
355.
Optimization of the performance of a filter press by statistical design of experiments and empirical modelling
356.
Optimum electromagnetic modelling of RF MEMS switches
357.
Optimum modelling of input-output characteristics
358.
Organ bio-impedance modelling with 3D mesh of equivalent circuits
359.
Orientation of short steel fibres in concrete : measuring and modelling = Metallist lühikiudude orientatsioon betoonis : mõõtmine ja modelleerimine
360.
Ozonation and advanced oxidation of polycyclic aromatic hydrocarbons - mathematical modelling
361.
Ozonation and advanced oxidation processes of polycyclic aromatic hydrocarbons - mathematical modelling
362.
Ozonation in paper mill water reuse: experimental results and mathematical modelling
363.
Ozone and UV in chlorophenols treatment : mathematical modelling
364.
Ozone mass transfer and modelling
365.
Parametric modelling study for filling of horizontal pipe containing water
366.
Performance modelling of DVB-T systems with MatLab/Simulink
367.
Petrophysical and numerical seismic modelling of CO2 geological storage in the E6 structure, Baltic Sea, offshore Latvia
368.
Phenomenological and numerical modelling of short fibre reinforced cementitious composites
369.
Power system stability monitoring - an approach of electrical load modelling
370.
Prediction the structure of protein kinase C catalytic domain by homology modelling
371.
Preliminary study on comparative load modelling in PSS/E and PSCAD
372.
Principles of modelling and simulation of technical chain systems
373.
Principles of modelling of technical chain systems
374.
Problems of manufacturing environment modelling in intelligent manufacturing systems
375.
Proceedings of the 21th [i. e. 21st] European-Japanese Conference on Information Modelling and Knowledge Bases : EJC2011 : Tallinn, Estonia, June 06-10, 2011
376.
Proceedings of the 21th [i. e. 21st] European-Japanese Conference on Information Modelling and Knowledge Bases : EJC2011 : Tallinn, Estonia, June 06-10, 2011. Vol. 2
377.
QSPR modelling of solubility of polyaromatic hydrocarbons and fullerene in 1-octanol and n-heptane
378.
Qualitative modelling and its applications - a survey
379.
Quality of photovoltaic modules, experimental evaluation and mathematical modelling
380.
Quantifying the land-use climate forcing in the past : a modelling approach focusing on Europe and the Holocene (LandClim II) [Online resource]
381.
Quantitative scenarios and modelling
382.
Quartz nonlinear high level signal modelling
383.
RANS modelling in gas-solid particle vertical flow : keynote [Electronic resource]
384.
RANS numerical modelling of turbulent polydispersed flows in CFB freeboard = Turbulentsete voolude matemaatiline RANS modelleerimine tsirkuleeriva keevkihi tingimustes
385.
Reactions and molecular modelling of prostanoids in the active site of Candida antarctica lipase B
386.
Reduction of tantalum pentoxide with aluminium and calcium : thermodynamic modelling and scale skilled tests
387.
Regional geoid modelling by the least squares modified Hotine formula using gridded gravity disturbances = Piirkondlik geoidi modelleerimine vähimruutude meetodil modifitseeritud Hotine valemiga kasutades võrgustatud ras
388.
Reservoir quality and petrophysical properties of Cambrian sandstones and their changes during the experimental modelling of CO2 storage in the Baltic Basin
389.
Risk management in environmental geotechnical modelling
390.
Sea-effect snowfall case in the Baltic Sea region analysed by reanalysis, remote sensing data and convection-permitting mesoscale modelling
391.
17. konverents "Mathemathical Modelling and Analysis"
392.
Serious game for modelling neighbourhood energy supply scenarios
393.
17th International conference on "Mathematical Modelling and Analysis" : June 6-9, 2012, Tallinn, Estonia : abstracts
394.
Simulation and prototyping of sociotechnical systems using agent-oriented modelling = Sotsiotehniliste süsteemide simulatsioon ja prototüüpimine kasutades agentorienteeritud modelleerimist
395.
Smart Energy and power systems modelling: an IoT and Cyber-Physical Systems perspective, in the context of Energy Informatics
396.
Software for statistical design of experiments and empirical modelling of cake filtration
397.
Software tools for modelling and simulation of manufacturing processes
398.
Soil fauna: key to soil organic matter dynamics and modelling : Handbook of methods : Version 1, February 2020
399.
Some issues in modelling comprehensive situation awareness
400.
Some remarks on time modelling in interactive computing systems [Electronic resource]
401.
Source apportionment and modelling study of particulate matter from the key sources in Tartu
402.
Spatial modelling tools in mining areas for improving mining process
403.
Statistical modelling of riverine nutrient sources and retention in the Lake Peipsi drainage basin
404.
Stochastic modelling in Estonian oil shale mining economics
405.
Striped texture of submesoscale fields in the northeastern Baltic Proper : results of very high-resolution modelling for summer season
406.
Structural modelling of engineering products and realisation of computer-based environment for product development
407.
Studying strategy process in organizations that are structurally modulating between exploration and exploitation : comparison of computational modelling and case study approach
408.
System modelling and measurement under the view of design of testability and fault diagnosis of analog circuits
409.
Techno-economic modelling of the Baltic CCUS onshore scenario for the cement industry supported by CLEANKER project
410.
Test driven domain modelling
411.
The Crisis Management System - a case study on aspect-oriented modelling with UPPAAL
412.
The Direction and intensity of China's monetary policy : a dynamic factor modelling approach
413.
The influence of fluid structure interaction modelling on the dynamic response of ships subject to collision and grounding
414.
The life cycle process model for efficient construction manager : conceptual modelling at the level of personality and at micro, meso and macro levels
415.
The modelling and kinetic investigation of the lipase-catalysed acetylation of steroisomeric prostaglandins
416.
The modelling and prognosis of hydroabrasive wear of hard alloys
417.
The modelling of design space for CAD systems
418.
The modelling of oil shale mining development and its influence to the environment
419.
The solubility of two magnetite powders in oxalic acid : applicability of empirical modelling
420.
24th International Conference on Mathematical Modelling and Analysis : May 28-31, 2019, Tallinn, Estonia : abstracts
421.
The use of high-resolution bathymetry for circulation modelling in the Gulf of Finland
422.
The use of modelling for the analysis of river water quality monitoring data
423.
Thermal modelling of a control center for flexibility analysis in nZEB nanogrids
424.
Thermodynamic modelling of electronic materials
425.
Three-dimensional crane modelling and control using Euler-Lagrange state-space approach and anti-swing fuzzy logic
426.
3D modelling of non-uniform and turbulent flow in vertical slot fishways
427.
3D modelling of the Onega Basin, northwestern Russia, from gravity and magnetic data and borehole information
428.
Time modelling for requirements and specification analysis
429.
Towards a Cross-Border Reference Architecture for the Once-Only Principle in Europe : An Enterprise Modelling Approach
430.
Transparent fuzzy systems and modelling with transparency protection
431.
Travel Activity Based Stochastic Modelling of Load and Charging State of Electric Vehicles
432.
Twenty fourth International Conference on Mathematical Modelling and Analysis : May 28-31, 2019, Tallinn, Estonia : abstracts
433.
Two- and three-dimensional distinct element modelling of the stability of the cavern in Maardu deposit
434.
Two dimensional modelling of alloy metal Schottky contacts to 6H-SiC substrate
435.
Two-phase CFD modelling of air-water flow transition in a horizontal circular pipe and comparisons with experimental results
436.
Unusual wave and water level conditions in the Baltic Sea during windstorm Gudrun in January 2005 and their modelling
437.
Urban stormwater management using GIS and modelling
438.
Use of interactive modelling in the field of energy saving
439.
Use of modelling error dynamics for the calibration of water distribution systems
440.
Using agent and UML technologies in modelling organizations : the case of a vehicle theft
441.
Using stohastic optimization for modelling of the new composite from recycled GFP
442.
Using transient flow equations for modelling of filling and emptying of the large-scale pipeline
443.
Water distribution system modelling and pumping optimization based on real network of Tallinn = Tallinna linna ühisveevärgi modelleerimine ja pumpamise optimeerimine
444.
Web systems evaluation on users' behaviour modelling
445.
Wet oxidation of concentrated wastewaters : the kinetic modelling
446.
Why information systems modelling is difficult
447.
Viewpoint : City Information Modelling (CIM) and Digitizing Urban Design Practices
448.
Virtual heart : modelling of cardiac dynamics and intracardiac bioimpedance
449.
Vortex ring-like structures in gasoline fuel sprays : modelling and observations [Electronic resource]
450.
Vortex rings in internal combustion engines : modelling versus experiment
451.
17. konverents "Mathemathical Modelling and Analysis"
452.
17th International conference on "Mathematical Modelling and Analysis" : June 6-9, 2012, Tallinn, Estonia : abstracts
453.
24th International Conference on Mathematical Modelling and Analysis : May 28-31, 2019, Tallinn, Estonia : abstracts
454.
3D modelling of non-uniform and turbulent flow in vertical slot fishways
455.
3D modelling of the Onega Basin, northwestern Russia, from gravity and magnetic data and borehole information
456.
Kristjan Urtson : doctor philosophiae geoloogia alal. PhD in Geology. Astmeline magma transport ja akumulatsioon : analoog- ja numbriline modelleerimine = Stepwise melt transport and accumulation : analogue and numerical
allikas
135
1.
Abstracts of 4th International Conference Mathematical Modelling and Analysis : May 27-30, 2009, Daugavpils
2.
Abstracts of 8-th International Conference Mathematical Modelling and Analysis : Trakai, Lithuania
3.
Abstracts of Papers of 19th IFIP Conference on System Modelling and Optimization : 12-16 July 1999, Cambridge, England
4.
Advances in Automatic Control, Modelling & Simulation : proceedings of the 15th International Conference on Automatic Control, Modelling & Simulation (ACMOS '13) : Brasov, Romania, June 1-3, 2013
5.
Applied mathematical modelling
6.
Autumn School on Microstructural Characterization and Modelling of Thin-Film Solar Cells : Akademie Schmöckwitz, Berlin, Germany, October 9-14, 2016
7.
Baltic Earth - Gulf of Finland Year 2014 Modelling Workshop : Modelling as a tool to ensure sustainable development of the Gulf of Finland-Baltic Sea ecosystem : Finnish Environment Institute SYKE, Helsinki, 24-25 Novemb
8.
BEM & FEM : 19th International Conference Mathematical Modelling in Solid Mechanics. Boundary and Finite Elements Methods, 30 May - 2 June 2001, Saint Petersburg, Russia : proceedings. Vol. 1
9.
BEM & FEM : 19th International Conference Mathematical Modelling in Solid Mechanics. Boundary and Finite Elements Methods, 30 May - 2 June 2001, Saint Petersburg, Russia : proceedings. Vol. 2
10.
BEM/FEM-2000 : 18th International Conference Mathematical Modelling in Mechanics of Solid and Structures by Boundary & FEM. Vol. 2
11.
BEM/FEM-2001 : 19th International Conference Mathematical Modelling in Mechanics of Solid and Structures by Boundary & Finite Elements Methods : proceedings. Vol. 2
12.
Climate modelling and impacts from the global to the regional to the urban scale : an international scientific seminar at HafenCity University Hamburg, 10 March 2015 : poster abstracts
13.
Coastal Engineering VI : Computer Modelling and Experimental Measurements of Seas and Coastal Regions : [papers of international conference]
14.
Ecological modelling
15.
Economic modelling
16.
EJC 2009 : proceedings of the 19th European-Japanese Conference on Information Modelling and Knowledge Bases : Maribor, Slovenia, June 1-5, 2009
17.
EJC2005 : proceedings of the 15th European-Japanese Conference on Information Modelling and Knowledge Bases : May 16-19, 2005, Tallinn
18.
EMS2013 : UKSim-AMSS 7th European Modelling Symposium, 20-22 November 2013, Manchester, United Kindgom : [proceedings]
19.
Enterprise modelling and information systems architectures
20.
Environmental modelling & software
21.
ESM '2013 : The 2013 European Simulation and Modelling Conference, Modelling and Simulation : October 23-25, 2013, Lancaster University, Lancaster, UK : [proceedings]
22.
ESM '2018 : The 2018 European Simulation and Modelling Conference, Modelling and Simulation : October 24-26, 2018, NH Gent Belfort, Ghent, Belgium : [Proceedings]
23.
EU Conference on modelling for policy support, 22-26 November 2021, Brussels : Abstracts
24.
Fourteenth IFIP Conference on System Modelling and Optimization : Leipzig, GDR, July 3 - 7, 1989
25.
ICMOS 2012 CD-ROM Proceedings : [International Conference on Modelling, Optimization and Simulation (ICMOS 2012), Berlin, Germany, September 19-20, 2012]
26.
INCO-Copernicus : Product and process data modelling for FMS (PPDMMC) : Integracja komputerowa przygotowania produkcji dla wytwarzania w elastycznym gniezdzie obrobkowym
27.
Information modelling and knowledge bases 3
28.
Information modelling and knowledge bases III. Foundations: theory and applications
29.
Information modelling and knowledge bases IV : concepts, methods and systems
30.
Information Modelling and Knowledge Bases VI
31.
Information Modelling and Knowledge Bases XII
32.
Information Modelling and Knowledge Bases XIV
33.
Information modelling and knowledge bases XIX
34.
Information modelling and knowledge bases XVII
35.
Information modelling and knowledge bases XXI
36.
Information modelling and knowledge bases XXII
37.
Information modelling and knowledge bases XXIII
38.
Information Modelling and Knowledge Bases XXIV
39.
Information modelling and knowledge bases XXVI
40.
Information modelling and knowledge bases XXVII
41.
Information modelling and knowledge bases XXVIII
42.
Information Modelling and Knowledge Bases XXXIII
43.
Information modelling and knowledge bases. XIII
44.
Information modelling and knowledge bases. XVI
45.
International Conference : Modelling and Simulation of Business Systems : May 13-14, 2003, Vilnius, Lithuania
46.
International journal of Mmthematical modelling and numerical optimisation
47.
International journal of simulation modelling
48.
International review on modelling and simulations (IREMOS)
49.
Journal of molecular graphics and modelling
50.
Knowledge modelling and knowledge bases, Toulouse, May 26-28, 1997
51.
Materials of the Workshop on Modelling the Economies of the Baltic Republics, Antwerpen, 29-31 January 1997
52.
Mathematical and computer modelling
53.
Mathematical modelling and analysis
54.
Mathematical Modelling and Analysis : 23rd international conference, May 29 - June 1, 2018, Sigulda, Latvia : abstracts
55.
Mathematical Modelling and Analysis : abstracts of the 10th International Conference MMA2005AMPCMAM2 : Trakai
56.
Mathematical modelling and analysis : the Baltic journal on mathematical applications, numerical analysis and differential equations
57.
Mathematical modelling and analysis 2016 : abstracts
58.
Mathematical Modelling and Simulation in Applied Sciences : proceedings of the 3rd International Conference on Energy, Environment, Devices, Systems, Communications, Computers (INEEE'12) : Rovaniemi, Finland, April 18-20
59.
Measuring and Modelling of Multi-Scale Interactions in the Marine Environment : IEEE/OES Baltic Symposium 2014, May 26.-29. 2014, Tallinn, Estonia : book of abstracts
60.
MIC 2015 : 2nd International Conference on Modelling, Identification and Control : August 9-10, 2015, Paris, France
61.
MIM 2001 : IFAC Workshop on Manufacturing, Modelling, Management and Control : 2-4 August 2001, Prague, Czech Republic : preprints
62.
MMA 2004 : 9th International Conference "Mathematical Modelling and Analysis" : abstracts
63.
Modelling and simulation : Sixth Bath International Fluid Power Workshop, held at the University of Bath, England, 23rd-24th September 1993
64.
Modelling and Simulation 2002 : 16th European Simulation Multiconference 2002 : ESM'2002, June 3-5, 2002, Darmstadt, Germany
65.
Modelling and Simulation 2008 : The European Simulation and Modelling Conference 2008 : ESM'2008 : October 27-29, 2008, Le Havre, France
66.
Modelling and Simulation for Autonomous Systems : Third International Workshop, MESAS 2016, Rome, Italy, June 15-16, 2016 : revised selected papers
67.
Modelling Nutrient Loads and Response in River and Estuary Systems : NATO/CCMS pilot study final report : June 2005. 271
68.
Modelling, computation and optimization in information systems and management sciences
69.
Modelling, Computation and Optimization in Information Systems and Management Sciences : Metz, France
70.
Modelling, Identification and Control (MIC2008) : February 11-13, 2008, Innsbruck, Austria
71.
Modelling, Logical and Philosophical Aspects of Foundations of Science. Vol. I
72.
Modelling, simulation and control
73.
Multi-Level Modelling (Dagstuhl Seminar 17492)
74.
New aspects of automatic control, modelling and simulation
75.
New trends in urban drainage modelling : UDM 2018 : Conference proceedings
76.
Nonlinear analysis : modelling and control
77.
Ocean modelling
78.
Papers of the Conference "Modelling and Simulation of Business Systems"
79.
Proceeding of the European-Japanese Conference on Conceptual Modelling and Intelligent Data Bases
80.
Proceeding of the European-Japanese Conference on Knowledge Modelling, 31.05-02.06.1993, Budapest
81.
Proceedings of 22th International Conference Mathematical Modelling in Mechanics of Solid and Structures by Boundary & FEM : St.Petersburg, September 2007
82.
Proceedings of 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013
83.
Proceedings of Symposium of Mathematical Modelling in Solid Mechanics by BEMAMPFEM. 3
84.
Proceedings of the 10th European-Japanese Conference on Information Modelling and Knowledgfe Bases
85.
Proceedings of the 10th IMEKO TC-4 International Symposium on Development in Digital Measuring Instrumentation and 3rd Workshop on ADC Modelling and Testing, 17-18 Sept. 1998, Naples, Italy. Vol. 1
86.
Proceedings of the 10th IMEKO TC-4 International Symposium on Development in Digital Measuring Instrumentation and 3rd Workshop on ADC Modelling and Testing, 17-18 Sept. 1998, Naples, Italy. Vol. 2
87.
Proceedings of the 12th European-Japanese Conference on Information Modelling and Knowledge Bases : May 27-30, 2002, Krippen, Swiss Saxony, near Dresden, Germany
88.
Proceedings of the 14th European-Japanese Conference on Information Modelling and Knowledge Bases : June 1-4, 2004, Skövde, Sweden
89.
Proceedings of the 16th IASTED International Conference on Applied Simulation and Modelling : August 29-31, 2007, Palma de Mallorca, Spain
90.
Proceedings of the 17th European-Japanese Conference on Information Modelling and knowledge Bases : EJC2007 : June 4-8, 2007, Pori, Finland
91.
Proceedings of the 17th IASTED International Conference on Modelling and Simulation : May 24-26, 2006, Montreal, Quebec, Canada
92.
Proceedings of the 20th European-Japanese Conference on Information Modelling and Knowledge Bases : Jyväskylä, Finland, May 31-June 4,2010
93.
Proceedings of the 21th [i. e. 21st] European-Japanese Conference on Information Modelling and Knowledge Bases : EJC2011 : Tallinn, Estonia, June 06-10, 2011. Vol. 1
94.
Proceedings of the 21th [i. e. 21st] European-Japanese Conference on Information Modelling and Knowledge Bases : EJC2011 : Tallinn, Estonia, June 06-10, 2011. Vol. 2
95.
Proceedings of the 21th [i. e. 21st] International Conference of Mathematical Modelling in Solid Mechanics. 2
96.
Proceedings of the 21th International Conference Mathematical Modelling in Mechanics of Solid and Structures by Boundary & FEM. 2
97.
Proceedings of the 26th International Conference on Information Modelling and Knowledge Bases - EJC 2016 : June 6-10, 2016, Tampere, Finland
98.
Proceedings of the 29th IASTED International Conference on Modelling, Identification and Control (MIC 2010) : February 15-17, 2010 Innsbruck, Austria
99.
Proceedings of the 3rd International Symposium on Two-Phase Flow Modelling and Experimentation : ISTP-2004 : Pisa, Italy, September 22-26, 2004
100.
Proceedings of the 3rd International Workshop on (Meta)Modelling for Healthcare Systems : Bergen, Norway, June 13th, 2018
101.
Proceedings of the 6th European Workshop on ACD Modelling and Testing : 13-14 Sept., 2001 : Lisbon, Portugal
102.
Proceedings of the Fourth IASTED International Conference on Modelling, Simulation, and Optimization : August 17-19, 2004, Kavai, Hawaii, USA
103.
Proceedings of the Workshop on Enterprise Modelling and Ontology : Ingredients for Interoperability : 5th International Conference on Practical Aspects of Knowledge Management (PAKM)
104.
Proceedings of XVII Symposium of Mathematical Modelling in Solid Mechanics by BEM & FEM
105.
Process and circuit modelling and analysis
106.
Recent Researches in Automatic Control : 13th WSEAS International Conference on Automatic Control, Modelling & Simulation (ACMOS'11), Lanzarote, Canary Islands, May 27-29, 2011
107.
Recent Researches in Automatic Control : 13th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS'11) : Lanzarote, Canary Islands, Spain, May 27-29, 2011
108.
Simulation and Modelling : Enablers for a Better Quality of Life : 14th European Simulation Multiconference 2000 : ESM'2000 : May 23-26, 2000, Ghent, Belgium
109.
Simulation in Wider Europe : 19th European Conference on Modelling and Simulation ECMS 2005 : June 1st-4th, Riga, Latvia
110.
Studies on measuring and modelling the water and nutrient exchange of the Gulf of Riga
111.
Symposium on Scale Effects in Modelling Hydraulic Structures, September 3-6,1984
112.
The International Workshop on Harbour, Maritime and Multimodal Logistics, Modelling & Simulation : HMS 2003 : September 18-20, 2003, Riga, Latvia
113.
The Third International Conference : Tools for Mathematical Modelling : June 18-23, Saint-Petersburg : book of abstracts
114.
Theses of the 18th IFIP Conference, System Modelling and Optimization, Detroit, 21-26 July 1997
115.
Tools for mathematical modelling
116.
UK-Israel Workshop "Sprays : Modelling versus Experimentation" : Brighton, UK, July 16-18, 2007
117.
UKSim 15th International Conference on Computer Modelling and Simulation : 10-12 April 2013, Cambridge, United Kingdom : proceedings
118.
Workshop on Modelling the Economies of the Baltic Republics, 12-13 September, Vilnius
119.
XVI IMEKO World Congress : IMEKO2000 : proceedings of the 5th Workshop on ADC Modelling and Testing (EWADC'2000) : Vienna, Austria, Sept. 25-28, 2000
120.
12th International Conference : Mathematical Modelling and Analysis : May 30 - June 2, 2007, Trakai, Lithuania, : abstracts
121.
14th IFIP Conference on System Modelling and Optimization : Leipzig, GDR, July 3 - 7, 1989
122.
14th International Conference "Mathematical Modelling and Analysis" : May 27-30, 2009, Daugavpils, Latvia : abstracts
123.
16th International Conference "Mathematical Modelling in Mechanics of Solids and Structures, Boundary and Finite Element Methods", June 1998, St. Petersburg, Russia
124.
16th International Conference "Mathematical Modelling in Mechanics of Solids and Structures, Boundary and Finite Element Methods", June 1998, St. Petersburg, Russia. Vol. 1
125.
17th International conference on "Mathematical Modelling and Analysis" : June 6-9, 2012, Tallinn, Estonia : abstracts
126.
18th International Conference on Mathematical Modelling and Analysis and 4th International Conference on Approximation Methods and Orthogonal Expansions : May 27-30, 2013, Tartu, Estonia : abstracts : the conference is d
127.
20th International Conference Mathematical Modelling in Mechanics of Solid and Structures by Boundary & FEM. V.2
128.
21st European Conference on Modelling and Simulation : ECMS 2007 : Simulations in United Europe : June 4th-6th, 2007, Prague, Czech Republic
129.
24th International Conference on Information Modelling and Knowledge Bases EJC 2014 : June 3-6 2014, Kiel, Hotel Birke, Germany
130.
24th International Conference on Mathematical Modelling and Analysis : May 28-31, 2019, Tallinn, Estonia : abstracts
131.
4th IFAC Symposium Modelling and Control in Biomedical Systems
132.
4th International Conference Inverse Problems : Modelling and Simulation : Fethiye, 26-30.05.2008 : abstracts
133.
7th International Conference : Mathematical Modelling and Analysis, May 31 - June 2, 2002, Kääriku, Estonia : abstracts
134.
7th International Scientific Conference Managing and Modelling of Financial Risks : 8th-9th September 2014, Ostrava, Czech Republic
135.
BEM & FEM-2000 : Математическое моделирование в механике сплошных сред на основе методов граничных и конечных элементов : XVIII международная конференция : труды том III : 18th International Conference Mathematical Model
võtmesõna
106
1.
activity based modelling
2.
agent oriented modelling
3.
agent-oriented modelling
4.
analytical modelling
5.
architecture modelling
6.
aspect oriented modelling
7.
aspect-oriented modelling
8.
atmospheric dispersion modelling
9.
biological system modelling
10.
building information modelling
11.
Building Information Modelling (BIM)
12.
Building Information Modelling (BIM) adoption
13.
business process modelling
14.
C. Analytical modelling
15.
C. Computational modelling
16.
cable sheath modelling
17.
case studies of meta-modelling in healthcare applications
18.
city information modelling (CIM)
19.
continuous process modelling
20.
discrete event modelling
21.
distribution system modelling
22.
domain model and domain modelling
23.
domain modelling
24.
dynamic modelling of used vehicles
25.
ecological modelling
26.
ecosystem modelling
27.
electromagnetic modelling
28.
empirical modelling
29.
energy modelling
30.
FEM modelling
31.
finite element modelling
32.
flow-based modelling
33.
FMS modelling and simulation
34.
forward proxy modelling
35.
fracture modelling
36.
fused deposition modelling
37.
game-theoretic modelling
38.
geoid modelling
39.
geophysical modelling
40.
groundwater modelling
41.
HAM modelling
42.
heat pump modelling
43.
hydrodynamic modelling
44.
hydrologic modelling
45.
hydrological modelling
46.
hygrothermal modelling
47.
ice modelling
48.
input-output modelling
49.
internal-flow hydraulic modelling
50.
interpretive structural modelling
51.
iterative modelling and control design
52.
Lab-scale modelling
53.
landscape modelling
54.
law modelling
55.
load modelling
56.
long-term hydrodynamic modelling
57.
macroscopic modelling
58.
material modelling
59.
mathematical modelling
60.
metabolic modelling
61.
modelling
62.
modelling and meta-modelling in healthcare
63.
modelling and simulation
64.
modelling inhibition of nitrification
65.
modelling of wear
66.
modelling pharmaceuticals
67.
modelling prediction
68.
modelling/modeling, building integrated PV
69.
multilevel modelling
70.
Multi-paradigm Modelling (MPM)
71.
neural fuzzy modelling control
72.
numerical modelling
73.
ocean modelling
74.
point cloud modelling
75.
power system modelling
76.
process and data modelling
77.
process models and modelling
78.
qualitative modelling
79.
quality modelling
80.
railway system modelling
81.
RANS modelling
82.
regional geoid modelling
83.
regional modelling
84.
requirements modelling
85.
response surface modelling
86.
risk modelling
87.
signal modelling
88.
soil organic matter modelling
89.
statistical modelling
90.
stochastic modelling
91.
structural equation modelling
92.
systems modelling
93.
test driven modelling
94.
theory and practice of meta-modelling with application in healthcare
95.
thermodynamic modelling
96.
threat modelling
97.
time-aware modelling
98.
tool life modelling
99.
tsunami modelling
100.
urban drainage system modelling
101.
water distribution system modelling
102.
wave modelling
103.
WDS modelling
104.
very high-resolution numerical modelling
105.
3D geological modelling
106.
3D modelling
seeria-sari
3
1.
Financial markets : principles of modelling, forecasting, and decision making ; 9
2.
Manufacturing Modelling, Management, and Control ; Vol. 7, Part 1
3.
WIT transactions on modelling and simulation ; 59
kirjastus/väljaandja
2
1.
European Commission Competence Centre on Modelling
2.
European Council for Modelling and Simulation