Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
mechanical properties (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
73
Vaata veel..
(5/1106)
Ekspordi
ekspordi kõik päringu tulemused
(73)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
nimi kasvavalt
nimi kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Guana, H.D.
;
Lia, C.J.
;
Gaoa, P.
;
Prashanth, Konda Gokuldoss
Materials science and engineering : A
2020
/
art. 138630, 5 p. : ill
https://doi.org/10.1016/j.msea.2019.138630
artikkel ajakirjas
2
Assessment of zirconia doped hardmetals as tribomaterials
Hussainova, Irina
;
Antonov, Maksim
;
Voltšihhin, Nikolai
Wear
2011
/
p. 1909-1915 : ill
artikkel ajakirjas
3
Cermets with Fe-alloy binder : A review
Kübarsepp, Jakob
;
Juhani, Kristjan
International journal of refractory metals and hard materials
2020
/
art. 105290, 25 p. : ill
https://doi.org/10.1016/j.ijrmhm.2020.105290
artikkel ajakirjas
4
Characterization of microstructure and mechanical properties of friction stir welded AlMg5-Al2O3 nanocomposites
Babu, N. Kishore
;
Kallip, Kaspar
;
Leparoux, Marc
Materials science and engineering : A
2016
/
p. 109-122 : ill
http://dx.doi.org/10.1016/j.msea.2016.01.102
artikkel ajakirjas
5
Comparison of laminate stiffness as measured by three experimental methods
Lasn, Kaspar
;
Echtermeyer, Andreas T.
;
Klauson, Aleksander
;
Chati, Farid
;
Decultot, Dominique
Polymer testing
2015
/
p. 143-152 : ill
http://dx.doi.org/10.1016/j.polymertesting.2015.04.006
artikkel ajakirjas
6
Densification and characterization of spark plasma sintered ZrC–ZrO2 composites
Hussainova, Irina
;
Voltšihhin, Nikolai
;
Cura, M. Erkin
;
Hannula, Simo-Pekka
Materials science and engineering : A - structural materials: properties, microstructure and processing
2014
/
p. 75-81 : ill
artikkel ajakirjas
7
Detachable connecting fittings failure loads on plywood furniture
Saar, Kaarel
;
Kers, Jaan
;
Luga, Üllar
;
Reiska, Ahto
Proceedings of the Estonian Academy of Sciences
2015
/
p. 113-117 : ill
http://dx.doi.org/10.3176/proc.2015.1S.07
artikkel ajakirjas
8
Development of hemp hurd particleboards from formaldehyde-free resins
Alao, Percy Festus
;
Tobias, Micah Onyedikachi
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
;
Goljandin, Dmitri
Agronomy research
2020
/
p. 679–688 : ill
https://doi.org/10.15159/AR.20.127
artikkel ajakirjas
9
Development of hemp hurd particleboards from formaldehyde-free resins
Alao, Percy Festus
;
Tobias, Micah Onyedikachi
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
;
Goljandin, Dmitri
11th International Conference Biosystems Engineering : May 6-8, 2020 in Tartu, Estonia : book of abstracts [Võrguteavik]
2020
/
p. 99
https://www.ester.ee/record=b5347289*est
artikkel kogumikus
10
Dry reciprocating sliding wear behaviour of alumina–silicon carbide nanocomposite fabricated by ceramic injection molding
Smirnov, Anton
;
Bartolome, Jose F.
;
Moya, J.S.
;
Kern, F.
;
Gadow, R.
Journal of the European Ceramic Society
2011
/
p. 469-474 : ill
artikkel ajakirjas
11
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites
Kallakas, Heikko
;
Shamim, M. A.
;
Olutubo, T.
;
Poltimäe, Triinu
;
Süld, Tiia-Maaja
;
Krumme, Andres
;
Kers, Jaan
Agronomy research
2015
/
p. 639-653 : ill
http://agronomy.emu.ee/vol133/13_3_2_B5.pdf
artikkel ajakirjas
12
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites [Electronic resource]
Kallakas, Heikko
;
Shamim, M. A.
;
Olutubo, T.
;
Poltimäe, Triinu
;
Süld, Tiia-Maaja
;
Krumme, Andres
;
Kers, Jaan
6th International Conference Biosystems Engineering 2015 : 7-8 May 2015, Tartu, Estonia : book of abstracts
2015
/
p. 94. [CD-ROM]
http://bse.emu.ee/BSE2015_Book%20of%20ABSTRACTS_ISBN.pdf
artikkel kogumikus
13
Effect of fly-ash cenospheres on properties of clay-ceramic syntactic foams
Rugele, Kristine
;
Lehmhus, Dirk
;
Hussainova, Irina
;
Peculevica, Julite
;
Lisnanskis, Marks
;
Shishkin, Andrei
Materials
2017
/
art. 828, p. 1-17 : ill
http://dx.doi.org/10.3390/ma10070828
artikkel ajakirjas
14
Effect of hemp fibre length on the properties of polypropylene composites
Alao, Percy Festus
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
Agronomy research
2019
/
p. 1517–1531 ill
https://doi.org/10.15159/AR.19.146
artikkel ajakirjas
15
Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials
Kwon, Hansang
;
Saarna, Mart
;
Yoon, Songhak
;
Weidenkaff, Anke
;
Leparoux, Marc
Materials science and engineering : A
2014
/
p. 338-345
https://doi.org/10.1016/j.msea.2013.10.046
artikkel ajakirjas
16
Efficient barrier properties of mechanically enhanced agro-extracted cellulosic biocomposites
Qasim, Umair
;
Fatima, R.
;
Usman, M.
Materials today chemistry
2020
/
art. 100378, 8 p. : ill
https://doi.org/10.1016/j.mtchem.2020.100378
artikkel ajakirjas
17
Electrical and mechanical properties of service-aged medium voltage porcelain support insulators
Kiitam, Ivar
;
Saarna, Mart
;
Taklaja, Paul
;
Tealane, Marko
;
Palu, Ivo
2020 6th IEEE International Energy Conference (ENERGYCon)
2020
/
p. 702-706
https://doi.org/10.1109/ENERGYCon48941.2020.9236596
artikkel kogumikus
18
Electroconductive alumina-TiC-Ni nanocomposites obtained by spark plasma sintering
Rodriguez-Suarez, T.
;
Bartolome, Jose F.
;
Smirnov, Anton
;
Lopez-Esteban, S.
;
Diaz, L.A.
;
Torrecillas, R.
;
Moya, J.S.
Ceramics international
2011
/
p. 1631-1636 : ill
artikkel ajakirjas
19
Evolution of microstructure and mechanical properties of LM25–HEA composite processed through stir casting with a bottom pouring system
Chinababu, Mekala
;
Krishna, Nandivelegu Naga
;
Sivaprasad, Katakam
;
Prashanth, Konda Gokuldoss
;
Bhaskara, Eluri
Materials
2022
/
art. 230
https://doi.org/10.3390/ma15010230
artikkel ajakirjas
20
Fabrication of Cu-W nanocomposites by integration of self-propagating high-temperature synthesis and hot explosive consolidation technologies
Aydinyan, Sofiya
;
Kirakosyan, H.
;
Zakaryan, Marieta
Eurasian chemico-technological journal
2018
/
p. 301-309 : ill
https://doi.org/10.18321/ectj763
artikkel ajakirjas
21
High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering
Babu, N. Kishore
;
Kallip, Kaspar
;
Leparoux, Marc
;
AlOgab, Khaled A.
;
Talari, Mahesh Kumar
;
Alqathani, N. M.
The international journal of advanced manufacturing technology
2017
/
p. 445-453 : ill
https://doi.org/10.1007/s00170-017-9994-9
artikkel ajakirjas
22
Impact of alkali and silane treatment on hemp/PLA composites’ performance: from micro to macro scale
Alao, Percy Festus
;
Marrot, Laetitia
;
Burnard, Michael David
;
Lavrič, Gregor
;
Saarna, Mart
;
Kers, Jaan
Polymers
2021
/
art. 851, 18 p. : ill
https://doi.org/10.3390/polym13060851
artikkel ajakirjas
23
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Salman, O. O.
;
Brenne, F.
;
Niendor, T.
;
Eckert, Jürgen
;
Prashanth, Konda Gokuldoss
Journal of Manufacturing Processes
2019
/
p. 255-261 : ill
https://doi.org/10.1016/j.jmapro.2019.07.010
artikkel ajakirjas
24
Influence of birch false heartwood on the physical and mechanical properties of wood-plastic composites
Kallakas, Heikko
;
Ayansola, Gbenga
;
Tumannov, Tanel
;
Goljandin, Dmitri
;
Poltimäe, Triinu
;
Krumme, Andres
;
Kers, Jaan
Bioresources
2019
/
p. 3554-3566 : ill
Influence of birch false heartwood...
artikkel ajakirjas
25
Influence of microstructure and strengthening mechanism of AlMg5-Al2O3 nanocomposites prepared via spark plasma sintering
Babu, N. Kishore
;
Kallip, Kaspar
;
Leparoux, Marc
Materials & design
2016
/
p. 534-544 : ill
http://dx.doi.org/10.1016/j.matdes.2016.01.138
artikkel ajakirjas
Kirjeid leitud 73, kuvan
1 - 25
eelmine
1
2
3
järgmine
pealkiri
833
1.
A method of using miniature samples for determining mechanical properties of metal of power-generating equipment at thermal power stations in Estonia
2.
Abrasive wear and mechanical properties of carbide composites
3.
Acousto-mechanical instrumentation of multiscale hysteretic memristive properties of the skin with nonlinear time reversal imaging
4.
Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites
5.
Assessment of associations between arterial mechanical properties and biochemical blood markers for early detection of atherosclerosis
6.
Changes in phosphorite composition and properties during mechanical activation
7.
Changes in the acidity and mechanical properties of paper during the artificial ageing
8.
Characterization of microstructure and mechanical properties of cermets at micro- and nanoscales
9.
Characterization of microstructure and mechanical properties of friction stir welded AlMg5-Al2O3 nanocomposites
10.
Cold storage and mechanical treatment affects renneting properties of milk
11.
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
12.
Comparison of mechanical and antibacterial properties of TiO2/Ag ceramics and Ti6Al4V-TiO2/Ag composite materials using combined SLM-SPS techniques
13.
Comparison of the microstructures and mechanical properties of TI6AL4V fabricated by electron beam melting, spark plasma sintering, and selective laser remelting
14.
Composition and structure of bimodal WC-Co materials related to mechanical properties and abrasive wear
15.
Determination of mechanical properties of thin hard coatings using nanoindentation
16.
Determination of the mechanical properties of carbide composites by spherical indentation
17.
Direct measurement of mechanical properties of metal to be used in manufacture of power plant equipment
18.
Durability of wood plastic composites : influence of weathering on the mechanical properties
19.
Effect of accelerated weathering on the mechanical properties of wood-plastic composites
20.
Effect of atomic layer deposited aluminium oxide on mechanical properties of porous silicon carbide
21.
Effect of birch false heartwood on the physical and mechanical properties of wood-plastic composites [Online resource]
22.
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites
23.
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites [Electronic resource]
24.
Effect of different hardwood species and lay-up schemes on the mechanical properties of plywood
25.
Effect of free carbon on the mechanical and tribological properties of cemented carbides
26.
Effect of hard cyclic viscoplastic deformation on phases chemical composition and micromechanical properties evolution in single crystal Ni-based superalloy
27.
Effect of high-force impulse loads on the modification of mechanical properties of heat-resistant steel after service
28.
Effect of interlayer delay on the microstructure and mechanical properties of wire arc additive manufactured wall structures
29.
Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet
30.
Effect of soaking/oven-drying on mechanical and physical properties of birch (Betula spp.) plywood
31.
Effect of strain rate and temperature on mechanical properties and fracture mechanism of the dispersion strengthened Al-12Al4C3 system
32.
Efficient barrier properties of mechanically enhanced agro-extracted cellulosic biocomposites
33.
Electrical and mechanical properties of service-aged medium voltage porcelain support insulators
34.
Electrical conductivity and mechanical properties of Cu-0.7wt% Cr and Cu-1.0wt% Cr alloys processed by severe plastic deformation
35.
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
36.
Evaluation of mechanical properties and residual stresses of hard PVD coatings
37.
Evolution of microstructure and mechanical properties of LM25–HEA composite processed through stir casting with a bottom pouring system
38.
Fire and mechanical properties of hemp and clay boards for timber structures
39.
Foreign object induced fiber undulation influence on mechanical properties of composite laminate
40.
Grain size-dependent mechanical and wear properties of TiC-FeNi steel cermets
41.
Impact of mechanical activation on physical and chemical properties of phosphorite concentrates
42.
Impact pressure on mechanical properties of aluminum based composite by ECAP-parallel channel
43.
Influence of birch false heartwood on the physical and mechanical properties of wood-plastic composites
44.
Influence of cellulose content on rheological and mechanical properties of “green” poly(lactic) acid/cellulose composites
45.
Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose composites
46.
Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose composites
47.
Influence of extraction methods on the raw material physic-mechanical properties of fillers
48.
Influence of filler proportion on mechanical and physical properties of particulate composite
49.
Influence of hard cyclic viscoplastic deformation on chemical composition and micromechanical properties of phases of single crystal Ni-base superalloys
50.
Influence of hollow glass microspheres on the mechanical and physical properties and cost of particle reinforced polymer composites
51.
Influence of interphases on the mechanical properties of alumina nanofibers reinforced alumina nanocomposite
52.
Influence of strain rate and temperature on mechanical properties and fracture mechanism of the dispersion strengthened Al-12Al4C3 system
53.
Investigation of dynamic mechanical properties of Estonian clay Arumetsa during firing
54.
Investigation of mechanical and physicochemical properties of clinically retrieved titanium-niobium orthodontic archwires
55.
Local tribo-mechanical properties of TiC-based cermets by nanoindentation
56.
Mechanical and tribological properties of 100-nm thick alumina films prepared by atomic layer deposition on Si(100) substrates
57.
Mechanical and physical properties of hemp fiber-mat reinforced polyethylene film composites
58.
Mechanical and physical properties of industrial hemp-based insulation materials
59.
Mechanical and physical properties of silane crosslinked wood flour reinforced composites
60.
Mechanical and physical properties of thermally modified wood flour reinforced polypropylene composites
61.
Mechanical and physical properties of thermally modified wood flour reinforced polypropylene composites [Online resource]
62.
Mechanical properties and features of erosion of cermets
63.
Mechanical properties and fracture developed in nanocopper by severe plastic deformations
64.
Mechanical properties and fracture of nanocopper by severe plastic deformations
65.
Mechanical properties and microstructure of reactive sintered WC-TiC-Co cemented carbides
66.
Mechanical properties and self-healing capacity of ultra high performance fibre reinforced concrete with alumina nano-fibres: tailoring ultra high durability concrete for aggressive exposure scenarios
67.
Mechanical properties and wear performance of compression sintered TiC based cermets
68.
Mechanical properties of aluminum, zirconium, hafnium and tantalum oxides and their nanolaminates grown by atomic layer deposition
69.
Mechanical properties of chromium carbide based cermets at micro-level
70.
Mechanical properties of chromium carbide based cermets at micro-level [Electronic resource]
71.
Mechanical properties of connecting fittings for plywood furniture
72.
Mechanical properties of hard metals and their erosive wear resistance
73.
Mechanical properties of pinewood (Pinus Sylvestris) swollen in organic liquids
74.
Mechanical properties of pinewood treated with aqueous solutions of organic substances
75.
Mechanical properties of thin hard coatings on TiC-NiMo substrates
76.
Method elaboration for measuring the structural-mechanical properties of genutine gel and chewing candies
77.
Micromechanical properties and electrical conductivity of Cu and Cu-0.7wt% Cr alloy
78.
Micromechanical properties and erosive wear performance of chromium carbide based cermets
79.
Micromechanical properties and wear resistance of powder coatings
80.
Microstructural evolution and mechanical properties of nanostructured copper
81.
Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
82.
Microstructure and mechanical properties of Al–(12-20)Si bi-material fabricated by selective laser melting
83.
Microstructure and mechanical properties of hea alloys fabricated by selective laser melting of powder mixtures
84.
Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgy
85.
Microstructure and mechanical properties of NiTi-SS bimetallic structures built using wire arc additive manufacturing
86.
Microstructure and physical-mechanical properties evolution of pure tantalum processed with hard cyclic viscoplastic deformation
87.
Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying
88.
Microstructure evolution and changes in mechanical properties in WC-Co composites during recycling by oxidation-reduction process and sintering
89.
Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al2O3 nanocomposites
90.
Microstructure, mechanical, and impression creep properties of AlMg5-0.5 vol% Al2O3 nanocomposites
91.
Microstructure, texture and mechanical properties of cyclic expansion-extrusion deformed pure copper
92.
Multiscale memristive properties of skin inducedby memory effects of cyclic stress-relaxationloadings : data fusion from ground truth nonlin-ear acousto-mechanical testing
93.
Nanosructured copper manufacturing features and mechanical/physical properties forming
94.
Necessity of mechanical properties testing for service exposed power plant steels
95.
Optimization ofwheat-straw-extractedcellulose via response surface methodology and mechanical properties of its poly(lactide)-based biocomposites
96.
Phase formation, microstructure and mechanical properties of Mg67Ag33 as potential biomaterial
97.
Phases micromechanical properties of Ni-base superalloy measured by nanoindentation
98.
Preliminary investigation into mechanical properties of clay reinforced with natural fibres
99.
Preliminary study of the influence of post curing parameters to the particle reinforced composite's mechanical and physical properties
100.
Processing and mechanical properties of ZrC-ZrO2 composites
101.
Punch lifetime in fine-blanking with optimum combination of mechanical properties
102.
Recycling of PA-12 in additive manufacturing and the improvement of its mechanical properties
103.
Rheological and mechanical properties of poly(lactic) acid- and polyethylene-based cellulosic composites
104.
Rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose composites
105.
Selective laser melting of 316L stainless steel : Influence of TiB2 addition on microstructure and mechanical properties
106.
Selective laser melting of Al-7Si-0.5 Mg-0.5Cu : effect of heat treatment on microstructure evolution, mechanical properties and wear resistance
107.
Selective laser melting of Cu-Ni-Sn : a comprehensive study on the microstructure, mechanical properties, and deformation behavior
108.
Small scale mechanical properties of chromium carbide-based materials
109.
Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
110.
Standards for acousto-mechanical evaluation of multiscale hysteretic properties of complex material with nonlinear time reversal imaging
111.
Structure and mechanical properties of the engine valves with intermetallic disk
112.
Structure and mechanical properties of Ti-Al
113.
The determination of mechanical properties of orthotropic composites
114.
The effect of carbon content on the mechanical and tribological properties of WC-Co cemented carbides
115.
The effect of ionic liquids on the mechanical properties of electrospun polyacrylonitrile membranes
116.
The effect of temperature and mechanical treatment on the properties of xanthan's, tara's and their blend's solutions
117.
The effect of temperature, humidity and mechanical properties on crack formation on external thin plasters of ETICS
118.
The influence of accelerated weathering on the mechanical and physical properties of wood-plastic composites
119.
The influence of birch (Betula pendula) false heartwood on the mechanical properties of wood-plastic composites = Kase (Betula pendula) väärlülipuidu mõju puitplastkomposiitide mehaanilistele omadustele
120.
The influence of conductive additives on the mechanical properties of electrospun mats = Juhtivate lisandite mõju elektrokedratud nanokiuliste lausmaterjalide mehaanilistele omadustele
121.
The influence of content and production parameters on the structure and mechanical properties of TiC-NiMo cemented carbides
122.
The influence of processing parameters on mechanical properties of spark plasma sintered chromium carbide based cermets
123.
The influence of TiC powder to reactive sintered TiC-NiMo cermets microstructure and mechanical properties [Electronic resource]
124.
The study of the laser hardering parameters on the structure and the mechanical properties of the PM steel Vanadis 6
125.
Thermal and mechanical properties of composites based on treated lignocellulosic fibres
126.
Thermal degradation and mechanical properties of biofiber-reinforced polyethylene composites
127.
Tribological and mechanical properties investigations of post-consumer cotton textiles
128.
Tungsten matrix composite reinforced with CoCrFeMnNi high-entropy alloy : impact of processing routes on microstructure and mechanical properties
129.
Wear behaviour and mechanical properties of sinterhipped hardmetals
130.
A 2D magnetic and 3D mechanical coupled finite element model for the study of the dynamic vibrations in the stator of induction motors
131.
A comparative study of the growth dynamics and tribological properties of nanocrystalline diamondfilms deposited on the (110) single crystaldiamond and Si(100) substrates
132.
A comparative study on physical properties of Al-doped zinc oxide thin films deposited from zinc acetate and zinc acetylacetonate by spray pyrolysis
133.
A comparative study on physical properties of Al-doped zinc oxide thin films deposited from zinc acetate and zinc acetylacetonate solutions by spray pyrolysis
134.
A comparison of the motions of surface drifters with offshore wind properties in the Gulf of Finland, the Baltic Sea
135.
A conceptual framework for software developing in mechanical CAD
136.
A multi-layer Cu:Ga/In sputtered precursor to improve structural properties of CIGS absorber layer
137.
A review of the synthesis and photoluminescence properties of hybrid ZnO and carbon nanomaterials
138.
A review on basic methods of extraction of neutral oxygen compounds from shale oil, their composition and properties
139.
A role of long-range interaction in ILM properties and defects creation in ionic crystals
140.
Ab initio calculations of elastic properties of isotropic and oriented Ti(1-x)AlxN hard coatings
141.
Ab inito study of GaN properties using VASP software package
142.
Abnormal oil rheological properties changing by ultrosound using different power
143.
Accelerated carbonation technology granulation of industrial waste: Effects of mixture composition on product properties
144.
Acid/base properties of some conformationally flexible organocatalysts
145.
Acoustic and thermoacoustic properties of an additive manufactured lattice structure
146.
Adhesive properties of ozonated polyethylene
147.
Adhesive properties of ozone modified LDPE
148.
Adsorption properties of wheat straw, reed and douglas fir chars
149.
Aerated concrete microwave reflection and transmission properties in a wet environment
150.
Aerosol-assisted fine-tuning of optoelectrical properties of SWCNT films
151.
Aggregation properties of a series of novel L-phenylalanine derived surfactants
152.
Air permeability properties of cross laminated timber
153.
Aluminate-based nanostructured luminescent materials : design of processing and functional properties
154.
An experimental investigation of the mechanical and acoustical transmission paths on a car
155.
An international study of the psychometric properties of the Hofstede Values Survey Module 1994: a comparison of individual and country/province level results
156.
An overview of statistical methods currently used for correlating sensory properties of food with its volatile composition
157.
Analysis of mechanical vibrations caused by eccentricity in a slow-speed slotless permanent magnet generator
158.
Analysis of switching properties of different high voltage IGBTs operating under hard-switching conditions
159.
Analysis of the properties of fast ferry wakes in the context of coastal management = Kiirlaevalainete omaduste analüüs rannikualade haldamise kontekstis
160.
Analysis of the reciprocal wear testing of Aluminum AA1050 processed by a novel mechanical nanostructuring technique
161.
Animation in Conrad: informal analysis of timing properties
162.
Antimicrobial and antioxidative properties of kitchen herbs
163.
Antimicrobial properties of onion and garlic preparations
164.
Application of inverse gas-liquid chromatography for determination of thermodynamic properties of test compounds in oil shale high-boiling oils
165.
Application of undefined mixture correlations and FTIR-PLS method to predict thermodynamic properties of hydroxyl group rich Kukersite oil shale derived "synthetic oils"
166.
Application of vector-phase methods for an estimation of acoustic properties of premises on transport
167.
Ash fouling of boiler tubes and thermophysical properties of deposits
168.
Bactericidal properties of electrochemically treated water
169.
Beam properties of trap detectors
170.
Behavior of Estonian kukersite kerogen in molecular mechanical force field
171.
Best practices for QSAR model reporting: physical and chemical properties, ecotoxicity, environmental fate, human health, and toxicokinetics endpoints
172.
Bioapatite as a geochemical archive : "Properties of biogenic apatite varieties as indicators of their formation and alteration", ETF research project 2002-2005
173.
Biocidal properties study of silver nanoparticles used for application in green housing
174.
Biological activity and physicochemical properties of chitosan film cross-linked with chestnut extract for active food packaging applications = Kastani ekstraktiga seotud kitosaankilede bioloogiline aktiivsus, füüsikalis
175.
Biomimetic mechanical design for soft-bodied underwater vehicles
176.
Boron carbide based composites microstructure and properties relationships to processing features
177.
Boron containing solid and superhard composites production techniques and properties [Electronic resource]
178.
Briquetting of municipal solid waste by different technologies in order to evaluate its quality and properties
179.
Camera gimbal performance improvement with spinning-mass mechanical gyroscopes
180.
Carbon aerogel-cellulose films and fibres with electrical conductivity and antibacterial properties against cyanobacteria
181.
Carbon xerogel from 5-methylresorcinol-formaldehyde gel : the controllability of structural properties
182.
Changes in properties of urea-formaldehyde resins during structuration
183.
Changing properties of wind waves and vessel wakes on the eastern coast of the Baltic Sea = Tuulelainete režiimi ja laevalainete omaduste muutused Läänemere idarannikul
184.
Characteristic properties of different vessel wake signals
185.
Characterization of metallic powders produced by mechanical milling
186.
Characterization of the structure and properties of composite powder materials and coatings
187.
Chemical composition and physical properties of the rock
188.
Chemical properties of peat in three peatlands with balneological potential in Estonia
189.
Chemical properties of peat with balneological potential in Estonia
190.
CMOS technology based current source with harmonic reducing properties
191.
CoCo-SIM : object-oriented multi-pole modelling and simulation environment for fluid power systems. Part 2, Modelling and simulation of hydraulic-mechanical load-sensing system
192.
Combined positioning system for mapping measured properties of objects of arbitrary shape
193.
Combustion synthesis of TiC-ZrC composite powder : role of mechanical activation
194.
Comparison of different sea buckthorn berries on the basis of physical properties
195.
Comparison of different sea buckthorn berry varieties on the basis of physical properties
196.
Comparison of direct and indirect methods of tensile properties determination for post-exposed power plant steels
197.
Comparison of performance-based specification properties for asphalt binders sourced from around the world
198.
Comparison of some mechanical and physical methods for measurement of residual stresses in brush-plated nickel hardened gold and silver coatings
199.
Comparison of storage proteins and baking properties of triticale
200.
Comparison of the ecotoxic properties of oil shale industry by-products to those of coal ash
201.
Comparison of the wear and frictional properties of Cu matrix composites prepared by pulsed electric current sintering
202.
Composition and binder properties of Estonian kukersite oil shale ash
203.
Composition and properties of oil shale ash concrete
204.
Composition and properties of the heating products of calcium phosphate-aluminociliate mixtures
205.
Composition and properties of the heating products of calcium phosphate-aluminosilicate mixtures
206.
Composition and properties of the heating products of calcium phosphate-aluminosilicates mixtures
207.
Composition and properties of the iron hydroxides-cemented lenses in Estonian sandstone of Middle Devonian Age
208.
Composition and properties of thermophosphates from apatite and aluminosilicates
209.
Composition and properties of thermophosphates from apatite and alumosilicates
210.
Composition and renneting properties of raw bulk milk in Estonia
211.
Composition, physico-chemical properties and antioxidant activity of Estonian honeys
212.
Compositionally tunable structure and optical properties of Cu1.85(CdxZn1 − x)1.1SnS4.1 (0 ≤ x ≤ 1) monograin powders
213.
Computational chemistry approaches for understanding how structure determines properties
214.
Conodont bioapatite resembles vertebrate enamel by XRD properties
215.
CONRAD - a system for evoluating behavioural properties of embedded software
216.
Controlled formation of optically active centres responsible for opto-electronic properties of II-VI compounds
217.
Copper(I)-binding properties of de-coppering drugs for treatment of Wilson disease
218.
Correlation between electrical bioimpedance and pressure waveform in radial artery and in mechanical pulsating pipe system
219.
Corrosion protective properties of polypyrrole films on mild steel
220.
Coupled magneto-mechanical analysis of iron sheets under biaxial stress
221.
Covalent coupling of ionic liquid to carbon nanotubes : preparation and tribological properties
222.
Crumb rubber as a secondary raw material from waste rubber : a short review of end-of-life mechanical processing methods
223.
Crystal structure and magnetic properties of Peacock- Weakley type polyoxometalates Na9[Ln(W5O18)2] (Ln = Tm, Yb): Rare example of Tm(III) SMM
224.
Crystalline structure, surface morphology and optical properties of nanolamellar composites obtained by intercalation of InSe with Cd
225.
CuInS2 thin films: formation by spray pyrolysis and properties
226.
Dependence of Estonian peat deposit properties on landscape types and feeding conditions = Eesti turba omaduste sõltuvus maastikutüüpidest ja turbalasundi toitumistingimustest
227.
Description and typical properties of shale oil derived alkyl resorcinol epoxy materials for adhesives and industrial coatings
228.
Design of a hydraulic-mechanical load-sensing system using object-oriented modelling and simulation
229.
Detailed modeling of sorptive and textural properties of CaO-based sorbents with various porous structures
230.
Determination of acoustic properties for open duct termination in hot jet conditions using FEM simulation
231.
Determination of circulating fluidized bed boiler thermal efficiency burning oil shale with different properties
232.
Determination of inhomogeneous properties of materials by analysis of ultrasonic wave motion
233.
Determination of physical, mechanical and burning characteristics of polymeric waste material briquettes
234.
Determination of tensile properties of power plant steels by testing of miniature specimens
235.
Determination of the acoustic transmission properties of IC-engine air inlet system components
236.
Determination of vaporization properties and volatile hazardous components relevant to kukersite oil shale derived fuel oil handling
237.
Determing properties of nonlinear microstructured materials by means of solitary waves
238.
Development of analysis methodology of technical indicators of peat and relationship between these indicators, peat properties and fields of use
239.
DFK resins and adhesives : (properties and application)
240.
Diatom and microarthropod communities of three airfields in Estonia – their differences and similarities and possible linkages to airfield properties [Online resource]
241.
Diislikütuste omaduste muutumise uurimine nende pikaajalisel hoiustamisel = The study of the changes of diesel fuel properties at its long term storage
242.
Distributed computing applied to sensitivity analysis of mechanical systems
243.
Dolomites of the Muhu Formation (Silurian) in mainland Estonia : aspects of dolomitization, properties, and prospects of utilization
244.
Dynamic hardness as the most reliable number characterising the properties of materials
245.
Dynamic properties of clouds Cumulus humilis and Cumulus fractus extracted by solar radiation measurements
246.
eContractual choreography-language properties towards cross-organizational business collaboration
247.
EEG patterns and regularity properties during propofol induced anesthesia/sedation
248.
Eesti mehaanilise puutööstuse Aktsia Selts A.M. Luther = Company for Mechanical Woodworking A.M. Luther Ltd. in Eesti, Reval
249.
Efectiveness of different additives on minced flesh fish fingers physical, microbiological and rheological properties
250.
Effect cleaning procedure of Mo surface to the properties of MoSe2
251.
Effect of absorber surface modification on the optoelectronic properties of Cu2CdGeSe4 solar cells
252.
Effect of atomic oxygen irradiation on the structural and tribological properties of the MoS<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub>/PI composites
253.
Effect of attrition milling on grain size and properties of composites
254.
Effect of carbide produces technique on the structure and properties of the Cr3C2-Ni cermets
255.
Effect of carbon content on sinterability and properties of ZrO2 doped WC-cermets
256.
Effect of CdCl2 annealing treatment on structural and optoelectronic properties of close spaced sublimation CdTe/CdS thin film solar cells vs deposition conditions
257.
Effect of CdCl2 vapor phase pretreatment annealing on the properties of CSS CdS and CdTe/CdS thin film solar cells
258.
Effect of composite layers based on dyes with different type of conductivity on photovoltaic properties of CIS films
259.
Effect of EUF on evolution of microstructure and properties of advanced superalloys
260.
Effect of fly-ash cenospheres on properties of clay-ceramic syntactic foams
261.
Effect of germanium incorporation on the properties of kesterite Cu2ZnSn(S,Se)4 monograins
262.
Effect of H2S treatment on properties of CuInS2 thin films deposited by chemical spray pyrolysis at low temperature
263.
Effect of heat treatment on the phase transformation and magnetic properties of BPSCCO/LPMO composites
264.
Effect of hemp fibre length on the properties of polypropylene composites
265.
Effect of hemp fibre length on the properties of polypropylene composites [Online resource]
266.
Effect of hydrocolloids on the rheological properties of ultrafiltrated curds
267.
Effect of log soaking and the temperature of peeling on the properties of rotary-cut birch (Betula pendula Roth) veneer bonded with phenol-formaldehyde adhesive
268.
Effect of mechanical stress on excess loss of electrical steel sheets
269.
Effect of mechanical stress on magnetization and magnetostriction strain behavior of non-oriented Si-Fe steels at different directions and under pseudo-DC conditions
270.
Effect of new superhard phases formation on properties of composite processed by SHS
271.
Effect of polymer layer deposition and annealing on photovoltaic properties of CuInS2/polymer structures
272.
Effect of polypropylene grade on hinge properties
273.
Effect of selenium treatment on mineral nutrition, bulb size, and antioxidant properties of garlic (Allium sativum L.)
274.
Effect of sinter/HIP technology on properties of TiC-NiMo cermets
275.
Effect of solution spray rate on the properties of chemically sprayed ZnO:In thin films
276.
Effect of steam activation on oil shale semi-coke surface properties
277.
Effect of Zn:S molar ratio in solution on the properties of ZnS thin films and the formation of ZnS nanorods by spray pyrolysis
278.
Effect of Zr doping on the structural and electrical properties of spray deposited TiO2 thin films
279.
Effect of the length of branches on hydrodynamic and conformational properties of hyperbranched polycarbosilanes
280.
Effect of the substrate surface on properties of RF sputtered magnetronantimony selenide (Sb2Se3) for thin-films
281.
Effect of the thickness on the electrical and optical properties of ZN(O,Se) layers prepared by PLD
282.
Effect of wood species and storage time on particleboards properties
283.
Effects of deuterium implantation on the optical properties of Cu(InGa)Se2
284.
Effects of the inclusion of armchair graphene nanoribbons on the electrical conduction properties of NN-heterojunction 4H-6H/SiC diodes
285.
Electrical properties of polyaniline and polypyrrole bilayer structures
286.
Electrical properties of sprayed CuInS2 films for solar cells
287.
Electrical, optical and structural properties of sprayed CuInS2 films for solar cells
288.
Electromagnetic shielding properties of ceramic spheres coated with paramagnetic metal
289.
Electronic and optical properties of magnesium and calcium hydroxides : the role of covalency and many-body effects
290.
Elektri-mehaaniline tehas "Volta" A.-S. = The Electro-Mechanical Works "VOLTA" Ltd. = Die Elektro-Mechanische Fabrik "Volta" A.-G. = Электро-механическiй заводъ "ВОЛЬТА" А.-О
291.
Enantioselective properties of overoxidized polypyrrole films imprinted with L-Aspartic acid studied by EQCM technique
292.
English reader for students of mechanical engineering. Term IV
293.
Enhanced sensing properties of cobalt bis-porphyrin derivative thin films by a magneto-plasmonic-opto-chemical sensor
294.
Enhancing binding properties of imprinted polymers for the detection of small molecules
295.
Ensemble hindcast of the wave properties in the Baltic Sea [Online resource]
296.
Equivalent strain and stress models for the effect of mechanical loading on the permeability of ferromagnetic materials
297.
Erratum to "Physicochemical, textural, and sensorial properties of fibrous meat analogs from oat-pea protein blends extruded at different moistures, temperatures, and screw speeds" [Future Foods, 4 (2021) 100092]
298.
Essential properties of reed and their influence on combustion equipment
299.
Estonian oil shale properties and utilization in power plants
300.
Evaluation of aquatic ecosystem planktonic communities state according to the properties of seston eczoenzyme activity
301.
Evaluation of microstructure and properties of heat-proof superalloy enforced by electrical upsetting forging
302.
Evolution of microstructure and properties in Ti-alloys during rapid electrocontact heating with SPD
303.
Experience in an application of project-based learning to teaching of mechanical engineering and energy technology processes control
304.
Experience in tensile properties determination by small punch test
305.
Experience of continuing professional development of mechanical engineers in Estonia
306.
Experimental spray powders and coatings produced from recycled hardmetal by various mechanical methods
307.
Experimental testing of exterior wall mounted mechanical ventilation exhaust air outlet devices
308.
Extent of carbonate decomposition in CFB boiler firing oil shale with different properties
309.
Extremal properties of Euler - Maclaurin and Gregory quadrature formulas
310.
Fabrication, control and properties of nanocrystalline copper
311.
Faculty of Mechanical Engineering
312.
Faculty of Mechanical Engineering : 1996/1997 : undergraduate programmes, research areas, services and consultations
313.
Faculty of Mechanical Engineering : 1998-1999 : programmes, research areas, services and consultations
314.
Faculty of Mechanical Engineering : 2000 : programmes, areas of research and development, services and consultations
315.
Faculty of Mechanical Engineering 2014
316.
Faculty of Mechanical Engineering 2015
317.
Fast static compaction of tests composed of independent sequences : basic properties and comparison of methods
318.
Fatigue performance and mechanical reliability of cemented carbides
319.
Fault detecting accuracy of mechanical damages in rolling bearings
320.
Fibrous alumina-based Ni-CeO2 catalyst : synthesis, structure and properties in propane pre-reforming
321.
Field investigations of apparent optical properties of ice cover in Finnish and Estonian lakes in winter 2009
322.
Field work in the role of teaching and research of rock properties
323.
Fire tests on glued-laminated timber beams with specific local material properties
324.
First principle calculations of structural, electronic, optical and thermoelectric properties of tin (II) oxide
325.
Formation and properties of chemically sprayed Zno films
326.
Formation of properties of CuInSe2 and Cu2ZnSn(S,Se)4 monograin powders synthesized in molten KI = Kaaliumjodiidsulandaja keskkonnas kasvatatud monoterapulbrite CuInSe₂ ja Cu₂ZnSn(S,Se)₄ omaduste kujundamine
327.
Formation of structure of the CdTe film, recrystallized on Mo/glass substrate under high temperature and mechanical pressure
328.
Friction and wear of mechanical equipment
329.
Generative design in development of mechanical components for magnus effect-based wind turbine
330.
Global data on earthworm abundance, biomass, diversity and corresponding environmental properties
331.
Growth and electrical properties of ZnO nanorod arrays prepared by chemical spray pyrolysis
332.
Growth and optical properties of two-dimensional transition metal dichalcogenides = Kahedimensionaalsete siirdemetallide dikalkogeniidide kasvatus ning optiliste omaduste uurimine
333.
Growth and properties of ZnO films on polymeric substrate by spray pyrolysis method
334.
Growth, thermal stability, and magnetic properties of Co films on Ni3Al(001)
335.
Heart bioimpedance 3D FDM modelling with anisotropic tissue properties
336.
Heavy metals in roadside: chemical analysis of snow and soil and the dependence of the properties of heavy metals on local conditions
337.
Heavy metals in the roadside soil : chemical analysis and dependency of properties on the local conditions
338.
High temperature properties of CdTe crystals, doped by Sb
339.
High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions
340.
High-κ metal oxide thin film by chemical spray pyrolysis : from optimization of material properties to application in thin film transistor = Metallioksiidi õhukesed kiled keemilise pihustuspürolüüsi meetodil : materjali
341.
Home-reading texts for second-year students of mechanical engineering
342.
Host-guest complexes of 2-aminocyclohexyl thioureas andzinc porphyrins: chiroptic properties and binding mechanism
343.
How unreliable are petroleum derived correlations for predicting thermodynamic properties of kukersite oil, which are needed in process design and environmental risk assessment?
344.
Hydrogen interaction with point defects in the Si-SiO2 structures and its influence on the interface properties
345.
Identification and characterization of bioactive peptides with antimicrobial and immunoregulating properties derived from bovine colostrum and milk = Antimikroobsete ja immuunsüsteemi stimuleerivate omadustega bioaktiivs
346.
Identification of properties of microstructured materials by means of Gaussian wave packets and solitary waves
347.
Immunological properties and immobilization of Bacillus macerans cyclodextrin glycosyltransferase
348.
Impact and sliding wear properties of single layer, multilayer and nanocomposite physical vapour deposited (PVD) coatings on the plasma nitrided low-alloy 42CrMo4 steel
349.
Impact of anionic substitutions on apatite structure and properties
350.
Impact of component losses on the voltage boost properties and efficiency of the QZS-converter family
351.
Impact of component losses on the voltage boost properties and efficiency of the qZS-converter family [Electronic resource]
352.
Impact of cracks to the hygrothermal properties of CLT water vapour resistance and air permeability
353.
Impact of Cu2ZnSn(SexS1-x)4 (x=0.3) compositional ratios on the monograin powder properties and solar cells
354.
Impact of growth-synthesis conditions on Cu2Zn1-xCdxSnS4 monograin material properties
355.
Impact of high energy milled activation on the thermal properties of Bulgarian and Estonian natural apatites
356.
Impact of post-deposition treatments on properties of SnS films and solar cells grown by close-spaced sublimation technique [Online resource]
357.
Impact of seasonal climate change on optical and molecular properties of river water dissolved organic matter by HPLC
358.
Impact of seasonal climate change on optical and molecular properties of river water dissolved organic matter by HPLC-SEC and UV-vis spectroscopy
359.
Impact of short-term heat treatment on the structure and functional properties of commercial furcellaran compared to commercial carrageenans
360.
Impact of the physico-chemical properties of fen peat on the metal accumulation patterns in mires of Latvia
361.
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
362.
Impact of the selenisation temperature on the structural and optical properties of CZTSe absorbers
363.
Impact of thermohaline conditions on vertical vvariability of optical properties in the Gulf of Finland (Baltic Sea) : implications for water quality remote sensing
364.
Impact of weft yarn density and core-yarn fibre composition on tensile properties, abrasion resistance and air permeability of denim fabrics
365.
Impacts of different solvents and substrates on properties of zinc oxide nanorod layers prepared by chemical spray pyrolysis
366.
Implementation of 3D modeling techniques for design of mechanical products with modular structure
367.
Impurity interaction with point defects in the Si-SiO2 structures and its influence on the interface properties
368.
In memoriam : Investigation of the physical properties of oil shale of the Estonian deposit
369.
Influence of annealing in H2 atmosphere on the electrical properties of thin film CdS
370.
Influence of aqueous solutions of organic substances on structure and properties of pinewood
371.
Influence of aqueous solutions of organic substances on structure and properties of pinewood (Pinus sylvestris) = Orgaaniliste ainete vesilahuste mõju männipuidu (Pinus sylvestris) struktuurile ja omadustele
372.
Influence of binder composition and microhardness on wear properties of light weight composites
373.
Influence of cellulose content on thermal properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose composites
374.
Influence of cellulose stearate (CS) content on thermal and rheological properties of poly(lactic acid)/CS composites
375.
Influence of compositional deviations on the properties of Cu2ZnSnSe4 monograin powders
376.
Influence of conductive polymer deposition on photovoltaic properties of prospective inorganic photoabsorber CuInS2 in solar cell
377.
Influence of copper and oxygen on the optoelectronic properties of chlorine doped CdTe fhin films
378.
Influence of copper and oxygen on the optoelectronic properties of chlorine doped CdTe thin films
379.
Influence of Cu2S, SnS and Cu2ZnSnSe4 on optical properties of Cu2ZnSnS4
380.
Influence of differently formed interfacial aluminium oxide on the structural properties of poly-Si films prepared by aluminium induced crystallisation
381.
Influence of gelation temperature on the properties of sol-gel-derived calcium hydroxyapatite ceramics
382.
Influence of graphite pore forming agents on the structural and electrochemical properties of porous Ni-CGO anode
383.
Influence of guar gum/furcellaran and guar gum/carrageenan stabilizer systems on the rheological and sensorial properties of ice cream during storage
384.
Influence of interior layer properties to moisture dry-out of CLT walls
385.
Influence of Na doping on opto-electrical properties of CdTe:Cl
386.
Influence of non-stoichiometry on some electrical properties and structure of barium titanate for PTC thermistors
387.
Influence of particles properties on the collision of solid particles with hardmetal and cermet
388.
Influence of point defects on optoelectronic properties of II-IV semiconductors
389.
Influence of solution composition on sprayed ZnO nanorods properties and formation process: Thermoanalytical study of the precursors
390.
Influence of SPD on structure and properties of copper
391.
Influence of sulphur dioxide and hydrogen chloride on properties of oil shale ash
392.
Influence of technological conditions on the properties of CBD CdS layers
393.
Influence of the copper content on the optical properties of CZTSe thin films
394.
Influence of the interface on the photoluminescence properties in ZnO carbon-based nanohybrids
395.
Influence of the secondary thermal annealing on the properties of CdTe/CdS:CdCl2:O2 structure
396.
Influence of the SPD processing features on the nanostructure and properties of a pure niobium
397.
Influence of the technology to the properties of gas-flame coatings
398.
In-situ study of TiO2 thin-films mechanical behavior under loading
399.
Intelligence system for design and investigation mechanical values sensors
400.
Interaction of point defects with impurities in the Si-SiO2 system and its influence on the interface properties
401.
Interaction of point defects with impurities in the Si-SiO2 system and its influence on the properties of the interface
402.
Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements
403.
Intermediate and low radiofrequency electromagnetic field transmission properties in case of common building materials [Online resource]
404.
Internal scales and dispersive properties of microstructured materials
405.
Interpolating generalized Shannon sampling operators, their norms and approximation properties
406.
Interpolating generalized Shannon sampling operators, their norms and approximation properties [Electronic resource]
407.
Inverse methods and integral-differential model demonstration for optimal mechanical operation of power plants - numerical graphical optimization for second generation of tribology models
408.
Investigation of elastic and inelastic properties of Estonian clay from a locality in Kunda during thermal treatment
409.
Investigation of electrical properties of cadmium sulfide thin films
410.
Investigation of physical properties of oil shale of Estonian deposits
411.
Investigation of properties and reaction mechanisms of redox-active proteins by ESI MS = Redoks-aktiivsete valkude omaduste ja reaktsioonimehhanismide uurimine ESI-MS abil
412.
Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatings
413.
Investigation of some properties of brush-plated gold and silver galvanic coatings
414.
Investigation of the photodynamic and antineoplastic properties of lonidamine
415.
Investigation of the structural, optical and electrical properties of Cu3BiS3 semiconducting thin films
416.
Investigation of the structure, composition and sorption properties of Alder (Alnus) wood
417.
Investigations of structure and tribological properties of the lightweight c-BN-based composites
418.
Isolated Potato Virus A coat protein possesses unusual properties and forms different short virus-like particles
419.
Isolation of cellulose from wheat straw using Alkaline Hydrogen Peroxide and Acidified Sodium Chlorite treatments: comparison of yield and properties
420.
Kinnituste projekteerimine betooni. Osa 4-4, Järelpaigaldatavad kinnituselemendid. Mehaanilised süsteemid = Design of fastenings for use in concrete. Part 4-4, Post-installed fasteners. Mechanical systems [Võrguteavik]
421.
Lie algebras with given properties of subalgebras and elements
422.
Magnetic properties of functional oxides = Funktsionaalsete oksiidide magnetilised omadused
423.
Magnetic properties of reduced Dy NdFeB permanent magnets and their usage in electrical machines
424.
Magneto-mechanical modeling of electrical steel sheets
425.
Maintenance manual : necessary toolkit when managing properties
426.
Material properties for 3D printing electrical machines
427.
Material properties of clay and lime based plaster for sturctural design
428.
Material properties of clay and lime plaster for structural fire design
429.
Materials properties of magnesium and calcium hydroxides from first-principles calculations
430.
Mathematical models in mechanical and biomedical tribology with computational simulations/optimization methods
431.
Mechanical activation of magnesium silicates for mineral carbonation, a review
432.
Mechanical and pyrometallurgical recycling of electronic wastes
433.
Mechanical and structural characterization of multiphase B4C/Al composites synthesized by SHS
434.
Mechanical and tribological behavior of gravity and squeeze cast novel Al-Si alloy
435.
Mechanical and wear behaviour of compression sintered hardmetals
436.
Mechanical and wear behaviour of Tic-base cermets sintered by different techniques
437.
Mechanical behavior of Ti6Al4V scaffolds filled with CaSiO3 for implant applications
438.
Mechanical behaviour of nanostructured copper produced by SPD method
439.
Mechanical characteristics of the AC linear drives
440.
Mechanical characterization and modeling of chromium carbide based composites
441.
Mechanical characterization and wear performance of WC–ZrO2–Ni cermets produced by hot isostatic pressing
442.
Mechanical disintegration of Al-W-B waste material
443.
Mechanical engineering study programmes in progress
444.
Mechanical recycling of compounded plastic waste for material valorization by briquetting
445.
Mechanical recycling of compounded polymeric waste and evaluation of briquetting parameters
446.
Mechanical recycling of electronic wastes by high-energy disintegrator mills
447.
Mechanical recycling of electronic wastes for materials recovery
448.
Mechanical strain increases protein tyrosine phosphorylation in airway smooth muscle cells
449.
Mechanical treatment of metal wastes
450.
Mechanical ventilation system in deep energy renovation of a multi-story building with prefabricated modular panels
451.
Mechanical vibration analysis of induction machine under dynamic rotor eccentricity [Electronic resource]
452.
Mechanism of a microwave-assisted polyol synthesis of nanosize CuInSe2 particles and their optical and photoelectric properties
453.
Mechanism of changes in the properties of chemically deposited CdS thin films induced by thermal annealing = Keemiliselt sadestatud CdS õhukeste kilede omaduste muutumise mehhanism termilisel lõõmutamisel
454.
Medium viscosity effect on fluorescent properties of Sn(IV)-tetra(4-sulfonatophenyl)porphyrin complexes in buffer solutions
455.
Mehaanikateaduskond = Faculty of Mechanical Engineering
456.
Mehanical properties of PVD coatings on TiC-based cermets
457.
Metal powders produced by mechanical methods
458.
Metal-binding properties of unique Cys-deficient mammalian metallothionein - sheep MT-3
459.
Metallic powders produced by mechanical methods
460.
Method of small samples for assessment of properties of power plant components : sampling devices and stress concentration in dimples
461.
Methods of improving of carbide steel properties
462.
Microorganism polysaccharides for purposeful change of immunochemical properties of immobilized enzymes and other bioregulatory proteins
463.
Microstructural and mechanical characteristics of in situ synthesized chromium-nickel-graphite composites
464.
Microstructural characteristics and properties of reactive sintered TiC-based cermets
465.
Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix composite
466.
Microstructure and mechanical characterization of WC-based composites doped by zirconia
467.
Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
468.
Microstructure and properties characterization of polycrystalline Ni-Fe-Cr-based superalloy EP-718E after electric upsetting
469.
Microstructure and properties development of copper during severe plastic deformation
470.
Microstructure and properties development of copper during severe plastic deformation [Electronic resource]
471.
Microstructure and properties of reactive sintered TiC-based cermets
472.
Microstructure and properties of UFG metals and alloys
473.
Microstructure and properties that change during hard cyclic visco-plastic deformation of bulk high purity niobium
474.
Microstructure and thermal properties of quasi-equal rare earth substitution Y0.5Gd0.5Ba2Cu3O6.94 superconductor
475.
Microstructure, properties and atomic level strain in severely deformed rare metal niobium
476.
Microtopography and the properties of residual peat are convenient indicators for restoration planning of abandoned extracted peatlands
477.
Microwave reflectance and transmittance properties of conductive composite materials
478.
Microwave reflection and absorption properties of wet snow
479.
Microwave reflection properties of building materials in the working environment
480.
Model checking emerging behavior properties of robot swarms
481.
Model checking of emergent behaviour properties of robot swarms
482.
Modeling of hysteresis losses in ferromagnetic laminations under mechanical stress
483.
Modelling and testing of the properties of recovered composite material
484.
Modification of conductive properties and processability of polyparaphenylene, polypyrrole and polyaniline
485.
Modification of low - density polyethylene : structure and properties
486.
Modification of the optoelectronic properties of Cu2CdSnS4 through low-temperature annealing
487.
Modularization : Exploring opportunities for knowledge transfer between the mechanical engineering and construction industry
488.
Molecular components of dissolved organic matter distinguished by optical properties and HPLC in the sediments of Lake Tõugjärv, Southern Estonia
489.
Molecular mass characteristics and hydrodynamic and conformational properties of hyperbranched poly-L-lysines
490.
Multi-pole modelling and simulation of a hydraulic mechanical load-sensing system using the CoCoViLa programming environment
491.
Multivariate models based on infrared spectra as a substitute for oil property correlations to predict thermodynamic properties : evaluated on the basis of the narrow-boiling fractions of Kukersite retort oil
492.
Nanostructure and properties study of advanced high purity rare metals
493.
Network monitoring of educational and industrial needs for the mechanical engineering sector
494.
Nickel oxide films by chemical spray: Effect of deposition temperature and solvent type on structural, optical, and surface properties
495.
Nondestructive characterization of materials with variable properties
496.
Normalisation of vehicle acoustic properties and it units in Russia
497.
Numerical investigation of properties of small size Axial Flux Permanent Magnet Motors
498.
Numerical simulation of mechanical waves in biomembranes
499.
Numerical study on the effect of geometry on mechanical behavior of triply periodic minimal surfaces
500.
Of different approaches of calculations of the surface properties of wood
501.
Oil shale CFBC ash cementation properties in ash fields
502.
Oil shale energy and some alternatives in Estonia : an academic lecture delivered by prof Ilmar Öpik at the Thermal Engineering Department of Tallinn Technical University on Dec. 14, 2000 to mark the 120 semesters since
503.
Oil shale fuel combustion : properties. Power plants. Boiler's design. Firig. Mineral matter behavior and fouling. Heat transfer. Corrosion and wear
504.
Oil shale waste rock aggregate properties which are depending on content of oil shale
505.
On approximation properties of generalized Kantorovich-type sampling operators
506.
On approximation properties of Kantorovich-type sampling operators
507.
On approximation properties of sampling operators defined by dilated kernels [Electronic resource]
508.
On approximation properties of Shannon sampling operators with averaged and dilated bandlimited kernels
509.
On approximation properties of Shannonn sampling operators with bandlimited kernels
510.
On approximation properties of the generalized sampling operators
511.
On approximation properties of the generalized Shannon sampling operators generated by band-limited kernels
512.
On dispersion properties of surface motions in the Gulf of Finland
513.
On information properties of covers
514.
On mechanical aspects of nerve pulse propagation and the Boussinesq paradigm
515.
On nonlinear waves in media with complex properties
516.
On some norms and approximation properties of Kantorovich-type sampling operators
517.
On the influence of material properties on the wave propagation in Mindlin-type microstructured solids
518.
On the statistical properties of tomlinson filters
519.
On the vibro-acoustic properties of a rotating perforated railway wheel
520.
One step synthesis of pure cubic and monoclinic HfO<sub>2</sub> nanoparticles : effects of temperature and ambient on the photoluminescent properties
521.
Optical and photoelectric properties of nanolamellar structures obtained by thermal annealing of InSe plates in Zn vapours
522.
Optical and photosensitive properties of lamellar nanocomposites obtained by Cd intercalation of GaTe
523.
Optical and physical properties of coastal water and their relations to radar (ASAR) data - a case study of Muuga Bay, Gulf of Finland
524.
Optical and physical properties of coastal water and their relations to radar (ASAR) data - case study of Muuga Bay in the Gulf of Finland
525.
Optical and structural properties of orthorhombic and tetragonal polymorphs of Cu2CdGeSe4
526.
Optical and structural properties of TiO2 thin films by chemical spray
527.
Optical properties of GaTe-ZnTe nanolamellae composite
528.
Optical properties of high quality Cu2ZnSnSe4 thin films
529.
Optical properties of multinary semiconductor compounds for photovoltaic applications = Päikesepatareides kasutatavate mitmikpooljuhtühendite optilised omadused
530.
Optical properties of sprayed ZnO thin films
531.
Optimization of mechanical strength of titania fibers fabricated by direct drawing
532.
Optoelectronic properties of CdSe - CdTe solid solutions
533.
Optoelectronic properties of CdTe thin films
534.
Optoelectronic properties of chlorine and oxygen doped CdTe thin films
535.
Organic and carbon aerogels containing rare-earth metals : their properties and application as catalysts
536.
Overheating prevention and daylighting in buildings without mechanical cooling = Ülekuumenemise vältimine ja loomuliku valguse tagamine mehaanilise jahutuseta hoonetes
537.
Overview of the use of Bellman dynamic programming method to eliminate oscillations in mechanical and electrical assemblies of technical objects
538.
Oxime functionalized surfactants in pH-responsive mixed micellar assemblies : physicochemical properties and esterolytic reactivity
539.
Oxygen barrier properties of Al<sub>2</sub>O<sub>3</sub>- and TiO<sub>2</sub>-coated LDPE films
540.
Particle size and proportion influence to impact properties of particulate polymer composite
541.
Pharmacological properties of MM-706, a new prostacyclin derivate
542.
Phase evolution, microstructure characteristics and properties of Cr3C2-Ni cermets prepared by reactive sintering
543.
Phases properties of SC superalloy measured by nanoindentation
544.
Photoelectric and photoluminescence properties of CdTe-GaTe composite
545.
Photoelectrical properties of In(OH)xSy/PbS(O) structures deposited by SILAR on TiO2
546.
Photoelectrochemical properties and band positions of Cd-substituted tetrahedrite Cu10Cd2Sb4S13 monograin materials grown in molten CdI2 and LiI
547.
Photoluminescence properties of Ge-implanted CuGaSe2 crystals
548.
Photoluminescence properties of polycrystalline AgGaTe2
549.
Photoluminescence properties of stoichiometric CuInSe2 crystals
550.
Photoluminescence properties of Z-bands in CdTe
551.
Physical and chemical properties of Estonian balneological peat
552.
Physical and chemical properties of ozone [Electronic resource]
553.
Physical and chemical properties of shale oil
554.
Physical and thermodynamic properties of kukersite pyrolysis shale oil : literature overview
555.
Physical and thermodynamic properties of phenol-rich oil from oil shale : application of correlations based on bulk properties
556.
Physical properties as a tool for quality assessment in fruit processing
557.
Physical properties of 7-Methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (mTBD)
558.
Physical properties of Estonian shale oils
559.
Physical properties of sea buckthorn fruits
560.
Physicochemical properties and esterolytic reactivity of oxime functionalized surfactants in pH-responsive mixed micellar system
561.
Physicochemical, textural, and sensorial properties of fibrous meat analogs from oat-pea protein blends extruded at different moistures, temperatures, and screw speeds
562.
Physiological properties of Lactobacillus paracasei, L.danicus and L.curvatus strains isolated from Estonian semi-hard cheese
563.
Point defects interaction with extended defects and impurities and its influence on the Si-SiO2 system properties
564.
Post-deposition processing for tuning the properties of Sb2Se3 thin films absorber layer grown by close-spaced sublimation
565.
Potyvirus Potato Virus A coat protein posses unusual properties and forms short virus-like particles
566.
Practical issues in the valuation of real properties with special reference to income approach and financial reporting purpose
567.
Pre- and posttreatment effect to the surface properties of thin hard coatings
568.
Predicting fuel properties from infrared spectra = Kütuse omaduste hindamine infrapunaspektrilt
569.
Predicting fuel properties using chemometrics : a review and an extension to temperature dependent physical properties by using infrared spectroscopy to predict density
570.
Preliminary analysis of soft magnetic material properties for additive manufacturing of electrical machines
571.
Preparation and properties of CdTe films on Mo/glass substrates
572.
Preparation and thermoelectric properties of Bi2Te3-Sb2Te3 alloys
573.
Processing and mechanical characterization of WC–ZrO2–Ni hybrids
574.
Processing and properties of bulk ultrafine-grained pure niobium
575.
Processing and properties of zirconia toughened WC-based cermets
576.
Processing and tribological properties of chromium carbide based cermets
577.
Processing and tribological properties of Cr3C2
578.
Processing of industrial metal scrap by mechanical means
579.
Production and properties of microcrystalline cellulose (MCC)
580.
Production and some unusual properties of levan, a polymer of D-fructose from special Zymomonas mobilis strain
581.
Properties and Application of DFK-Adhesives
582.
Properties and chemical composition of pinewood
583.
Properties and environmental impact of oil shale ash landfills
584.
Properties and microbial population stability of model rye sourdough composed from bacteria isolated from industrial rye sourdough
585.
Properties and performance of hard coatings on tool steels under cyclic indentation
586.
Properties and Use of Alkylresorcinol Adhesives in the Manufacture of Wooden Carrying Constructions
587.
Properties and use of industrial needlepunched textiles based on short flax fibres
588.
Properties development of ultrafine-grained copper under hard cyclic viscoplastic deformation
589.
Properties of chitin extracted from Estonian mushrooms
590.
Properties of clay plaster for the fire design of timber structures
591.
Properties of cocksfoot mottle sobemovirus (CfMV) proteins
592.
Properties of cocksfoot mottle virus proteins
593.
Properties of CuInS2 free surface and the effect of conductive polymer layers on these properties
594.
Properties of CuInS2 thin films prepared by spray pyrolysis from copper rich solution
595.
Properties of Cu-Sb-Se thin films deposited by magnetron co-sputtering for solar cell applications
596.
Properties of CuSbSe2 thin film solar cell absorbers deposited by magnetron co-sputtering
597.
Properties of dimension (facing) stone from Estonian dolostone
598.
Properties of Estonian stock market
599.
Properties of flax fiber reinforced polyethylene films
600.
Properties of flax fiber-reinforced polyethylene films
601.
Properties of fluidized bed burnt oil shale ashes
602.
Properties of frost-retted hemp fibers for the reinforcement of composites
603.
Properties of frost-retted hemp fibres for the reinforcement of composites
604.
Properties of hardmetals influencing their adhesive wear in sheet metal blanking
605.
Properties of hardmetals influencing their durability
606.
Properties of humic substances from the Baltic Sea and Lake Ermistu mud
607.
Properties of integration formula based on extended Fourier series
608.
Properties of kukersite shale oil
609.
Properties of limestone from Selgase deposit
610.
Properties of NiO thin film deposited spray pyrolysis
611.
Properties of NiO thin films prepared by chemical spray pyrolysis
612.
Properties of particleboards prepared with modified urea binders
613.
Properties of retted hemp fibres for reinforcement of composites
614.
Properties of steel powder prepared from bearing steel turnings
615.
Properties of ZnO-nanorod/In₂S₃/CuInS₂ solar cell and the constituent layers deposited by chemical spray method = Keemilise pihustuse meetodil sadestatud ZnO-nanovarras/In₂S₃/CuInS₂ päikesepatarei ja selle koostisosade o
616.
Properties of technical textiles based on low-melting PET and short flax fibre
617.
Properties of the CdCl2 air-annealed CSS CdTe thin films
618.
Properties of the CdCl2:O2 treated CSS CdTe thin films
619.
Properties of the CuInS2 surface and the effect of organic layers
620.
Properties of thermal probes with heat pipe cooling system
621.
Properties of TiO2 films prepared by spray pyrolysis method
622.
Properties of TiO2 films prepared by the spray pyrolysis method
623.
Properties of VPg and coat protein of sobemoviruses = Sobemoviiruste VPg ja kattevalgu omadused
624.
Puitkonstruktsioonid : ehituspuit ja liimpuit. Mõnede füüsikaliste ja mehaaniliste omaduste määramine = Timber stuctures : structural timber and glued laminated timber. Determination of some physical and mechanical prope
625.
Purification, properties and use of cholesterol esterase from Pseudomonas mendocina 3121
626.
Purification, properties and use of glucose oxidase from Aspergillus niger 12
627.
Quality assurance in mechanical testing laboratory by participating in proficiency test
628.
Quantitative structure-activity relationships of environmentally relevant properties
629.
Quantum mechanical transforms between [hii]- and [kapa]-space as a signal processing problem
630.
Rapid subunit exchange in dimeric lipoprotein lipase and properties of the inactive monomer
631.
Recrystallization of CdTe film under conditions of high temperature and mechanical pressure
632.
Recycled hardmetal-based powder composite coatings : optimisation of composition, structure and properties
633.
Redox and metal ion binding properties of human insulin-like growth factor 1 determined by electrospray ionization mass spectrometry
634.
Reflection and transmission properties of common construction materials at 2.4 GHz frequency
635.
Relationship between structure and properties of urea-formaldehyde resins
636.
Relationship between structure and properties of urea-formaldehyde resins. II
637.
Relationship between the chemical structure of urea-formaldehyde resins and properties of particleboards
638.
Removal of mechanical additives from the surface of cast niobium
639.
Reprocessing technology of composite plastic scrap and properties of materials from recycled plastics
640.
Research of switching properties and performance improvement methods of high-voltage IGBT based DC/DC converters = Kõrgepingelistel IGBT transistoridel põhinevate alalispingemuundurite lülitusomaduste ja jõudluse suureda
641.
Reservoir quality and petrophysical properties of Cambrian sandstones and their changes during the experimental modelling of CO2 storage in the Baltic Basin
642.
Reversibility of CdS film properties depending on the nature of annealing gas
643.
Review of - SiC wide-bandgap heterostructure properties as an alternate semiconductor material
644.
Review of the extraction of key metallic values from black shales in relation to their geological and mineralogical properties
645.
Rheological properties of gels formed with furcellaran and globular proteins bovine albumin and [beeta]-lactoglobulin
646.
Ripening and sensory properties of spice-cured sprats and sensory properties development
647.
RNA binding properties of potato A potyvirus encoded structural and non-structural proteins
648.
Rotational single sheet tester for multiaxial magneto-mechanical effects in steel sheets
649.
Selective antibiofilm properties and biocompatibility of nano-ZnO and nano-ZnO/Ag coated surfaces
650.
Sensory and chemical properties of Baltic Sprat (Sprattus sprattus balticus) and Baltic Herring (Clupea harengus membras) in different catching seasons
651.
Silver nanoparticles : synthesis, properties, and applications
652.
Sintering technology and properties of TiC-base cermets
653.
Some comparative properties of diffusion-welded contacts to 6H and 4H silicon carbide
654.
Some of comparative properties of diffusion welded contacts to 6H- and 4H-silicon carbide
655.
Spatial variation of statistical properties of extreme water levels along the eastern Baltic Sea
656.
Spatial variation of statistical properties of extreme water levels along the eastern Baltic Sea coast
657.
Specific statistical properties of the strength of links and nodes of the Estonian network of payments
658.
Spectral properties of incoherent terahertz torch based on parabolic Ga(As,Bi)/AlGaAs quantum wells [Online resource]
659.
Spectral properties of the phase-locked harmonic analyzer
660.
Spectroscopic and phase-stabilisation properties of pure and rare-earth ions activated ZrO2 and HfO2
661.
SSBDD model : advantageous properties and efficient simulation algorithms
662.
Strain relaxation mechanism in the Si-SiO2 system and its influence on the interface properties
663.
Stress relaxation mechanism by strain in the Si-SiO2 system and its influence on the interface properties
664.
Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layers
665.
Structural and electrical properties of P-type NiO thin films deposited by spray pyrolysis
666.
Structural and electrical properties of spray deposited copper indium disulphide films for solar cells = Pihustussadestatud vaskindiumsulfiidkilede struktuursed ja elektrilised omadused ning rakendus päikesepatareides
667.
Structural and optical properties of cadmium sulfide thin films modified by hydrogen annealing
668.
Structural and optical properties of CuInS2 thin films prepared by spray pyrolysis
669.
Structural and optical properties of sprayed CuInS2 films
670.
Structural and optical properties of ZnTe thin films
671.
Structural and optoelectronic properties of CdCl2 activated CdTe thin films modified by multiple thermal annealing
672.
Structural properties of apatites from Finland studied by FTIR spectroscopy
673.
Structure and electrochemical properties of Na2±xV3P2O13 (x = 0 and 1): a promising cathode material for sodium-ion batteries
674.
Structure and properties evolution of superalloy in zone of uniform deformation by electroupsetting
675.
Structure and properties evolution of superalloy in zone of uniform deformation by electroupsetting [Electronic resource]
676.
Structure and properties of apatites
677.
Structure and properties of boron nitride based composite produced by SHS method
678.
Structure and properties of commercial urea-formaldehyde resins
679.
Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix based coatings
680.
Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix-based coatings
681.
Structure and properties of oil-shale portland cement concrete
682.
Structure and properties of oil-shale portland cement concretes : the dissertation presented for a doctor's degree
683.
Structures and catalytic properties of titanium and iridium based complexes = Titaani ja iriidiumi komplekside struktuur ja katalüütilised omadused
684.
Studies of oil shale properties variation in El Lajjun (Jordan) borehole
685.
Studies of structural and morphological properties of cuprate conductive ceramics after electrochemical treatment in alkaline electrolyte
686.
Study of properties of HVOF-sprayed coatings
687.
Study of structural and optoelectronic properties of Cu<sub>2</sub>Zn(Sn<sub>1</sub> - <sub>x</sub>Ge<sub>x</sub>)Se<sub>4</sub> (x = 0 to 1) alloy compounds
688.
Study of technology and properties of PVD TiN coatings
689.
Study of the effect of mechanical treatment and supercritical CO2 extraction on aspen BCTMP by surface charge measurements and SEM
690.
Study of the optical properties of Sb2(Se1-xSx)3 (x = 0–1) solid solutions
691.
Study of the properties of TiO2 thin films deposited by ultrasonic spray pyrolysis [Online resource]
692.
Study on physico-chemical properties and some bioactive compounds of sea buckthorn (Hippophae rhamnoides L.)
693.
Study on the properties of TiO2 thin films deposited by ultrasonic spray pyrolysis
694.
Studying of internal and rheological properties of polyethylene-oil shale ash composites
695.
Superbasic system MNH(CH2)2NH2/H2N(CH2)2NH2, properties and using in organic synthesis
696.
Supporting mechanical design with visual programming in the NUT environment
697.
Surface carboxylation or PEGylation decreases CuO nanoparticles’ cytotoxicity to human cells in vitro without compromising their antibacterial properties
698.
Surface properties of birch false heartwood [Online resource]
699.
Surface properties of sprayed and electrodeposited ZnO rod layers
700.
Surface wetting properties of electrodeposited and sprayed ZnO nanorod layers [Online resource]
701.
Sven Lange : doctor philosophiae tahkisefüüsika alal. haruldaste muldmetallidega dopeeritud ja dopeerimata ZrO2 ja Hf=2 spektroskoopilised ja faasi-stabilisatsiooni omadused = PhD in solid state physics. Spectroscopic an
702.
Synergistic effects of fluorine and carbonate on Cd2+ binding properties of apatites
703.
Synthesis and electrical properties of potassium substituted hydrosodalites
704.
Synthesis and electrophysical properties of nanometric CdS layers deposited on SnO2-coated glass substrates by pulverization method
705.
Synthesis and hydrodynamic and conformation properties of star-shaped polystyrene with calix[8]arene core
706.
Synthesis and optical properties of Ga2O3 nanowires grown on GaS substrate
707.
Synthesis and properties of CaS:Eu luminophors
708.
Synthesis and properties of oxa[4]calixarene [Online resource]
709.
Synthesis and properties of urea resins containing triazinone rings
710.
Synthesis and structural and conformational properties of hybrid polymers of styrene with perfluorinated compounds of germanium
711.
Synthesis and superconducting properties of Nd0.33Eu0.08Gd0.58Ba2Cu3Oz materials
712.
Synthesis of superhard lightweight composites and improvement of their properties via chemical processing
713.
Synthesis of TiC by mechanical activation of powder components
714.
Synthesis of TiC powder by mechanical activation
715.
Zn(II) ions co-secreted with insulin suppress inherent amyloidogenic properties of monomeric insulin
716.
ZnCdSeTe semiconductor compounds : preparation and properties
717.
ZnO nanostructured layers by wet chemical deposition methods : growth, surface properties, photocatalytic capability = ZnO nanostruktuursed kihid vedeliksadestuse meetoditel : kasvatamine, pinnaomadused, fotokatalüütilin
718.
Tailoring composition and properties of CuInSe2 materials for solar cell application
719.
Tailoring II/VI semiconductor materials properties to photochemical requirements
720.
Tailoring II/VI semiconductor materials properties to photoelectrochemical requirements
721.
Tailoring of magnetic properties of MnAl thin films by protons irradiation
722.
Tailoring the composition and properties of CuInSe2 materials for solar cell application
723.
Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion
724.
Technology and properties of fine-grained Nd-Fe-B magnets = Nd-Fe-B peenteramagnetite tehnoloogia ja omadused
725.
Temperature and pressure dependence of density of a shale oil and derived thermodynamic properties
726.
Temperature dependent current transport properties in Cu<sub>2</sub>ZnSnS<sub>4</sub> solar cells
727.
Temperature dependent electrical properties of kesterite monograin layer solar cells = Kesteriitsete monoterakihiliste päikesepatareide elektriliste omaduste temperatuursõltuvused
728.
Testrig for characterization of turbo-compressor acoustic properties [Electronic resource]
729.
Textural properties of estagar gels in the presence of potassium and calcium cations and saccharose
730.
Textural properties of furcellaran gels with milk and its components
731.
The adhesive properties of interlining materials
732.
The adhesive properties of interlinings
733.
The adhesive properties of interlinings [Electronic resource]
734.
The analyzes of limestone and dolostone aggregate properties for highway constructions
735.
The Baltic Basin : structure, properties of reservoir rocks, and capacity for geological storage of CO2
736.
The changes in the optical properties of Ehrlich carcinoma cells treated with hematoporphyrin derivative and light
737.
The complex method for investigation of thermophysical properties of kraft recovery boiler fireside deposits
738.
The composition and properties of ash in the context of the modernisation of oil shale industry
739.
The Composition, Physicochemical Properties, Antioxidant Activity, and Sensory Properties of Estonian Honeys
740.
The copper structure and properties evolution in zone of severe plastic deformation
741.
The correlation and quantitative prediction of physical properties from chemical structure : a novel method for correlation and prediction of densities of organic compounds
742.
The crystal structure and optical properties of CdTe nano-composite obtained by treatment of GaTe layers in Cd vapor
743.
The dependence of sucrose, glucose syrop, furcellaran and citric acid concentrations on the properties and self-life stability of jelly
744.
The effect of Ag alloying of Cu2(Zn,Cd)SnS4 on the monograin powder properties and solar cell performance
745.
The effect of apple juice clarification and concentration on cider fermentation and properties of the final product
746.
The effect of approximation accuracy of the orientation distribution function on the elastic properties of short fibre reinforced composites
747.
The effect of growth temperature and spraying rate on the properties of ZnO:In films
748.
The effect of ionic liquid on the properties of electrospun polyacrylonitrile membranes [Online resource]
749.
The effect of laser fluences on the structural and optoelectronic properties of Zn(O,Se) films
750.
The effect of S/Se ratio on the properties of Cu2CdGe(SxSe1−x)4 microcrystalline powders for photovoltaic applications
751.
THE EFFECT OF S/SE RATIO ON THE PROPERTIES OF Cu2CdGe(SxSe1-x)4 MONOGRAIN POWDERS FOR PHOTOVOLTAIC APPLICATIONS
752.
The effect of sodium doping to CuInSe2 monograin powder properties
753.
The effect of surface pre-treatment and coating post-treatment to the properties of TiN coatings
754.
The effect of temperature on the properties of Xanthan's tara's and their blend's solution
755.
The effect of VC, TiC and Cr3C2 on the microstructure and properties of WC-15Co hardmetals fabricated by the reactive sintering
756.
The effect of wood flour fraction size on the properties of wood-plastic composites
757.
The effects of impact variables and abrasive particle properties on the erosion of cermets
758.
The effects of impact variables and abrasive particle properties on the erosion of cermets [Electronic resource]
759.
The effects of production technologies on the air permeability properties of cross laminated timber
760.
The electrical and optical properties of kesterites
761.
The electrophoretical spectra of storage proteins and baking properties of rye, triticale and wheat
762.
The extraction, structure, and gelling properties of hybrid galactan from the red alga Furcellaria lumbricalis (Balti Sea, Estonia)
763.
The extraction, structure, and gelling properties of hybrid galactan from the red alga Furcellaria lumbricalis (Baltic Sea, Estonia)
764.
The formation of structure and change of properties during heat treatment of boron carbide cermets
765.
The formation of structure and change of properties during heat treatment of boron carbide composites
766.
The formation of wear resistant properties of boron carbide cermet
767.
The influence of alumina and zirconia coats on the tribological properties of alumina nanofibers
768.
The influence of Cr3C2 and VC as alloying additives on the microstructure and properties of reactive sintered WC-Co cermets
769.
The influence of different packaging materials and atmospheric conditions on the properties of pork rinds
770.
The influence of doping with donor type impurities on the properties of CuInSe2
771.
The influence of oil shale ashes to the sedimentation properties of sludges in biotreatment
772.
The influence of reactive sintering parameters on the structure and properties of Cr3C2-Ni cermets
773.
The influence of refractory composition in binder phase on wear properties of boron carbide aluminium composites
774.
The influence of refractory composition in binder phase on wear properties of boron carbide aluminium composites [Electronic resource]
775.
The influence of Sinter/HIP sintering on the properties of chromium carbide based cermets
776.
The influence of target surface alterations on pulsed laser deposited YBa2Cu3O7-x film properties
777.
The investigation of growth promoting/inhibiting properties of microalgal extracts on commercially valuable microorganisms
778.
The investigation of structure and properties of TiAl-Nb alloy
779.
The isolation and properties of phosphate solubilizing microorganisms
780.
The microstructure and properties of fine-grained cermets
781.
The properties of different barrier coatings
782.
The properties of the adhesive bond formed by ozonized LDPE melt
783.
The resources and properties of Estonian balneological peat
784.
The role of Cl in the chemical bath on the properties of CdS thin films
785.
The role of physico-chemical properties and test environment on biological effects of copper and silver nanoparticles = Vase ja hõbeda nanoosakeste füüsikalis-keemiliste omaduste ja testikeskkonna mõju nende bioloogilise
786.
The role of structural properties on deep defect states in Cu2ZnSnS4 studied by photoluminescence spectroscopy
787.
The structure and magnetic properties of Co films on Ni3Al(0 0 1)
788.
The structure and properties forming in boron carbide aluminium composites during processing
789.
The structure and properties of recycled hardmetals
790.
The study of properties of aerogels derived from oil shale phenols
791.
The study of thermophysical properties of boiler furnace deposits
792.
The subcellular localisation and the RNA binding properties of two nonstructural proteins of cocksfoot mottle virus (CfMV)
793.
The synthesis and investigation of physicochemical properties of polyaniline
794.
The technology and properties of sprayed coatings
795.
Theoretical and practical aspects of adhesion. 3, Dependence of strength and surface properties of resorcinolic resins on reagent ratios
796.
Thermal and rheological properties of composites based on poly(lactic acid) and cellulose derivatives
797.
Thermal annealing effect on structural and electrical properties of chemical bath-deposited CdS films
798.
Thermal properties of calcium-aluminate based materials
799.
Thermal properties of modified polyethylene
800.
Thermodynamic and transport properties of liquid products from oil shale pyrolysis
801.
Thermodynamics of adsorption - an expression of properties of solid materials
802.
Thermophysical properties and thermal shock resistance of chromium carbide based cermets
803.
Thermo-physical properties and thermal shock resistance of chromium carbide based cermets
804.
Thermophysical properties of ash deposit on boiler heat exchange surfaces
805.
30 years of aerodynamic research at Faculty of Mechanical Engineering
806.
Time-dependent properties of a viscous vortex ring
807.
Tin sulfide films by chemical spray pyrolysis : formation and properties = Tinasulfiid kiled keemilise pihustuspürolüüsi meetodil : moodustumine ja omadused
808.
Treatment of metal wastes by mechanical and chemical means
809.
Trend for production of (CaOH)2 and PCC with determined properties
810.
Tribological properties of nanocrystalline diamond coating at high temperature sliding conductions [Online resource]
811.
Tribological properties of PVD coatings with lubricating films
812.
Tribological properties of selective laser melted Al12Si alloy
813.
Tribological properties of the Cr3C2-Ni metal-matrix composites
814.
Tribological properties of the Cr3C2-Ni metal-matrix composites [Electronic resource]
815.
Uncertainty estimation of damage factor of materials properties under the plasma influence
816.
Urea-formaldehyde resins for wood agglomerisation : synthesis, structure and properties
817.
Using of small punch test for determination of tensile properties for power plant steels
818.
Utilisation of industrial metal scrap by mechanical means
819.
Vaporization related properties of pyrolysis oils/tars from kukersite oil shale
820.
Vara hindamine. Osa 2, Varade liigid = Property valuation. Part 2, Types of properties
821.
Vara hindamine. Osa 2, Varade liigid = Property valuation. Part 2, Types of properties [Võrguteavik]
822.
Variability in the properties of long waves generated by high-speed ferries in Tallinn Bay
823.
Variability in the properties of wakes generated by high-speed ferries
824.
Water vapour transmission properties of linseed oil paint
825.
Wear properties of duplex treated surfaces
826.
Vene-Balti Laevaehituse ja Mehaanika Aktsia Selts = The Reval Shipyards of the Russo-Baltic Shipbuilding and Mechanical Company, Ltd. = Die Revaler Schiffswerft der Russisch-Baltishen Schiffsbau- u. Mechanischen Akt. Ges
827.
Verification of new 1000 [degree] C tester designed for investigation of wear-corrosion properties of advanced materials for high temperature applications
828.
Voltage withstand properties of the insulation of different types of medium voltage covered overhead line conductors
829.
X-ray investigation of microstructure and properties evolution on superalloy Inconel-718 derivative during rapid joule heating and severe plastic deformation in-situ
830.
Yields and properties of thermal bitumen obtained from combustible shale
831.
Yields and the selected physicochemical properties of thermobitumen as an intermediate product of the pyrolysis of Kukersite oil shale
832.
30 years of aerodynamic research at Faculty of Mechanical Engineering
833.
γ and α-(Fe, Ni) phase characterization using image processing and effect of phase formation on the P/M Fe(100-x)Ni(x) alloys properties
seeria-sari
115
1.
Advances in mechatronics and mechanical engineering (AMME)
2.
Research report / University of Oulu, Department of Mechanical Engineering, ISSN 0357-0282 ; n:o 97
3.
Research report / University of Oulu. Department of Mechanical Engineering, ISSN 0357-0282; n:o 102
4.
Tallinna Tehnikaülikooli preprindid = Preprints of Tallinn Technical University. E, Mechanical and instrumental engineering, ISSN 1406-4669; 6
5.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad ; 7
6.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad = Диссертации Таллиннского технического университета ; 3
7.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad = Диссертации Таллиннского технического университета ; 4
8.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad = Диссертации Таллиннского технического университета ; 6
9.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad = Диссертации Таллиннского технического университета, 1406-4758 ; 5
10.
Theses of Tallinn Technical University. E, Mechanical and instrumental engineering = Tallinna Tehnikaülikooli väitekirjad, 1406-4758 ; 2
11.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrument engineering ; 8
12.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering ; 10
13.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering ; 12
14.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering ; 13
15.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering ; 9
16.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 11
17.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 14
18.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 15
19.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 16
20.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 17
21.
Theses of Tallinn Technical University. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 18
22.
Theses of Tallinn Technical University. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 73
23.
Theses of Tallinn Technical University. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 75
24.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering ; 29
25.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering ; 30
26.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering ; 44
27.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering ; 57
28.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 34
29.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 45
30.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 46
31.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 48
32.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 51
33.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 52
34.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 55
35.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 56
36.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Masina- ja aparaadiehitus, 1406-4758 ; 62
37.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering = Dissertation zu Maschinen und Gerätebau ; 61
38.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 19
39.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 20
40.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 21
41.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 22
42.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 23
43.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 24
44.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 25
45.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 26
46.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 27
47.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 28
48.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 31
49.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 32
50.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 33
51.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 35
52.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 36
53.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 37
54.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 38
55.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 39
56.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 40
57.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 41
58.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 42
59.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 43
60.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 47
61.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 49
62.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 50
63.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 53
64.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 54
65.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 58
66.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 59
67.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 60
68.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 63
69.
Theses of Tallinn University of Technology. E, Thesis on mechanical and instrumental engineering, ISSN 1406-4758 ; 64
70.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, [Mehhanotehnika], 1406-4758 ; 67
71.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, [Mehhanotehnika], 1406-4758 ; 71
72.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 100
73.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 101
74.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 102
75.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 103
76.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 104
77.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 105
78.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 106
79.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 107
80.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 108
81.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 109
82.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 110
83.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 111
84.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 112
85.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 113
86.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 81
87.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 84
88.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 87
89.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 88
90.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 89
91.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 90
92.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 91
93.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 92
94.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 93
95.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 94
96.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 95
97.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 96
98.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 98
99.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika ; 99
100.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika, 1406-4758 ; 82
101.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika, 1406-4758 ; 83
102.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika, 1406-4758 ; 85
103.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering = [Tallinna Tehnikaülikooli väitekirjad]. E, Mehhanotehnika, 1406-4758 ; 86
104.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 65
105.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 66
106.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 68
107.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 69
108.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 70
109.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 72
110.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 74
111.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 76
112.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 77
113.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 78
114.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 79
115.
Theses of Tallinn University of Technology. E, Thesis on mechanical engineering, ISSN 1406-4758 ; 80
võtmesõna
93
1.
biomechanical properties of arteries
2.
interlayer mechanical properties
3.
mechanical and tribological properties
4.
mechanical properties
5.
mechanical properties C
6.
mechanical properties of particle reinforced material
7.
micromechanical properties
8.
microstructure and mechanical properties
9.
modification of mechanical properties
10.
acoustic properties
11.
air permeability properties
12.
antifungal properties
13.
apparent optical properties
14.
binding properties
15.
biocidal properties
16.
boundary properties
17.
bulk properties
18.
cadmium chloride treatment structural properties
19.
chemical properties
20.
D. optical properties
21.
dielectric properties
22.
electrical properties
23.
electrical properties and parameters
24.
electro-chemo-mechanical characterization (ECMD)
25.
fatigue properties
26.
fluorescent properties
27.
functional properties
28.
hydraulic properties
29.
hygroscopic properties
30.
inherent optical properties
31.
local properties of timber
32.
magnetic properties
33.
magneto-mechanical
34.
magneto-mechanical effects
35.
Material Properties
36.
mechanical activation
37.
mechanical alloying
38.
mechanical and thermal effects
39.
mechanical behaviour
40.
mechanical characteristics
41.
mechanical collection
42.
mechanical engineering
43.
mechanical engineering and energy technology
44.
mechanical engineering design
45.
mechanical nanostructuring
46.
mechanical oil recovery
47.
mechanical property
48.
mechanical recycling
49.
mechanical simulations
50.
mechanical stability
51.
mechanical strength
52.
mechanical stress
53.
mechanical testing
54.
mechanical wave
55.
mechanical waves
56.
mechanical waves in axoplasm
57.
mechanical waves in biomembrane
58.
mechanical ventilation
59.
mechanical ventilation system
60.
mechanical vibrations
61.
mechanism of changes in CdS properties
62.
Optical properties
63.
optimization of the mechanical design
64.
optoelectronic properties
65.
peat physico-chemical properties
66.
photoelectric properties
67.
photoluminescence properties
68.
physical properties
69.
physicochemical and electrochemical properties
70.
physicochemical properties
71.
physio-chemical properties
72.
pozzolanic properties
73.
properties
74.
properties of SSBDDs
75.
rock engineering properties
76.
rock properties
77.
solution properties
78.
spectral properties
79.
Structural properties
80.
switching properties
81.
tensile properties
82.
thermal properties
83.
thermodynamic properties
84.
thermoelectric properties
85.
thermo-mechanical simulations
86.
thermo‐mechanical simulations
87.
thermo-mechanical treatment
88.
thermophysical properties
89.
tribological properties
90.
uremic solute removal properties
91.
water absorption properties
92.
wear properties
93.
wool felt properties
allikas
57
1.
Conference Proceedings : 2nd International Conference SSTT : Determination of mechanical properties of materials by small punch and other miniature testing techniques
2.
Advances in mechanical behaviour, plasticity and damage : proceedings of EUROMAT 2000. Volume 1
3.
Advances in mechanical behaviour, plasticity and damage : proceedings of EUROMAT 2000. Volume 2
4.
ASME 2018 International Mechanical Engineering Congress and Exposition : Volume 2: Advanced Manufacturing : Pittsburgh, Pennsylvania, USA, November 9–15, 2018
5.
ASME 2019 International Mechanical Engineering Congress and Exposition : Volume 2: Advanced Manufacturing : conference proceedings
6.
ASME 2020 : International Mechanical Engineering Congress and Exposition, November 16–19, 2020 : Virtual, Online : proceedings
7.
ASME 2021 International Mechanical Engineering Congress and Exposition
8.
Book of abstracts of the VIII Iberoamerican Conference on Phase Equilibria and Fluid Properties for Process Design : 17-21 October, Praia da Rocha, Portugal
9.
Challenges to Civil and Mechanical Engineering in 2000 and Beyond : proceedings of the International Conference, Wroclaw, June 2-5, 1997. Vol. 3
10.
Conference: Progress in Computing of Physicochemical Properties : Warszawa, Poland, 18-20 Nov. 1999
11.
ECTP2014 - 20th European Conference on Thermophysical Properties : Porto, Portugal, August 31st-September 4th 2014 : abstracts
12.
First International Conference on Inorganic Materials : Synthesis, Characterisation, Properties and Applications of Inorganic Materials, 16-19 September 1998, Versailles, France : programme and abstracts
13.
Grundlagen, Herstellung und Eigenschaften von Sinter- und Verbundwerkstoffen : Abhandlungen der 6. Internationalen Pulvermetallurgischen Tagung, Dresden, 27. bis 29. September 1977 : [Vorabdrucke] = Fundamentals, product
14.
Innovative Solutions in the Field of Engineering Sciences : selected, peer reviewed papers from the 2014 International Conference on Applied Mechanics and Mechanical Automation (AMMA 2014), May 20-21, 2014, Macao, China
15.
International Conference : Advances in Nanostructured Materials, Processing - Microstructure - Properties : NANOVED 2006 - NENAMAT : May 14-17, 2006, Stara Lesna, Slovak Republic : book of abstracts
16.
International Conference Structure and Properties of the Brittle and Quaziplastic [i.e. Quasiplastic] Materials : June 14-16, 1994, Riga, Latvia : proceedings
17.
International journal of automotive and mechanical engineering
18.
International journal of mechanical engineering and technology
19.
International journal of mechanical sciences
20.
International journal of microstructure and materials properties
21.
International review of mechanical engineering
22.
International review of mechanical engineering (IREME)
23.
Journal of the Mechanical Behavior of Biomedical Materials
24.
Materials for potential EMI shielding applications : processing, properties and current trends
25.
Materials science and engineering : A - structural materials: properties, microstructure and processing
26.
Mechanical design and power engineering
27.
Mechanical systems and signal processing
28.
MEET/MARIND'2002 : proceedings of First International Congress on Mechanical and Electrical Engineering and Technology and Fourth International Conference on Marine Industry, 07-11 October 2002, Varna Bulgaria. Volume 1
29.
MICRO SYSTEM Technologies 98 : 6th International Conference and Exhibition on Micro Electro, Opto, Mechanical Systems and Components : Potsdam, Germany, December 1-3, 1998
30.
Milk proteins : structure and functional properties : 11-12 November, 1996, Lund, Sweden : abstract book
31.
Nano-architectured and nanostructured materials : fabrication, control and properties
32.
New Materials and Technologies in Mechanical Engineering : International Scientific Conference "New Materials and Technologies in Mechanical Engineering" (NMTME 2019)
33.
NorFa Workshop : Milk Proteins, Structure and Functional Properties, 28-30.11.1998, Naantali, Finland : abstracts
34.
Periodica polytechnica. Mechanical engineering
35.
Proceedings of 2010 International Conference on Mechanical and Electrical Technology (ICMET 2010) : Singapore, September 10-12, 2010
36.
Proceedings of 9th International Scientific Conference "Adhievements in Mechanical & Materials Engineering" : Gliwice, Poland, 11.-14.10.2000
37.
Proceedings of International Symposium on Mechanical Waves in Solids : Zehejiang University, Hangzhou, China, May 15-18, 2006
38.
Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces : 12-14 April 2011, London
39.
Proceedings of the 2014 International Conference on Food Properties (ICFP2014) : Kuala Lumpur, Malaysia, January 24-26, 2014
40.
Proceedings of the full papers of 13th international conference on Mechanical Engineering 2010 : Bratislava, October 2010
41.
Proceedings of the institution of mechanical engineers part L Journal of Materials Design and Applications
42.
Proceedings of the institution of mechanical engineers part M-journal of engineering for the maritime environment
43.
Proceedings of the Institution of Mechanical Engineers. Part I, Journal of systems and control engineering
44.
Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology
45.
Proceedings of the International Symposium-Exhibition on Advanced Materials, Technologies, Equipment and Tools in Mechanical Engineering : April 20-23, 1999, Kiev, Ukraine
46.
World Academy of Science, Engineering and Technology. International journal of aerospace and mechanical engineering
47.
World Academy of Science, Engineering and Technology. International journal of mechanical, industrial science and engineering
48.
World Forum on Advanced Polymeric Materials : Synthesis, Properties, Characterisation : POLYCHAR 18 : April 7 - 10, 2010 in Siegen, Germany
49.
X lberoamerican Conference on Phase Equilibria and Fluid Properties for Process Design : June 28-July 1, 2015, Alicante (Spain) : book of abstracts
50.
19th European Conference on Thermophysical Properties : Thessaloniki, Greece, August 28-September 1
51.
2014 International Conference on NdFeB Magnets : Supply Chain, Critical Properties, & Applications : proceedings : March 2-5th, 2014, New Century Grand Hotel Ningbo
52.
2014 MRS Spring Meeting & Exhibit : April 21-25, 2014, San Francisco, California : program. Symposium UU, Semiconductor Nanowires-Synthesis, Properties and Applications
53.
21st Discussion Conference of P.M.M./9th International Conference ERPOS : Electrical and Related Properties of Polymers and Other Organic Solids : Prague, 14-18 July 2002
54.
21st Discussion Conference of P.M.M./9th International Conference ERPOS : Electrical and Related Properties of Polymers and Other Organic Solids : Prague, 14-18 July 2002 : programme booklet. Volume K 76
55.
3rd Seminar on Aerogels : Synthesis-Properties-Applications : 22-23 September 2016, Mines ParisTech - PSL Research University, Sophia Antipolis (France) : proceedings
56.
4th Mechanical and Manufacturing Engineering : selected, peer reviewed papers from the 4th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), December 17-18, 2013, Bangi-Putrajaya, Malaysia
57.
50. Internationales Wissenschaftliches Kolloquium : 19.-23.09.2005 : Mechanical Engineering from Macro to Nano : [proceedings]
kirjastus/väljaandja
8
1.
American Society of Mechanical Engineers
2.
Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
3.
Mechanical Engineering Department, Auburn University
4.
Mechanical Engineering Publications, for the Institution of Mechanical Engineers
5.
Scientific society of mechanical engineers
6.
Scientific-technical Union of Mechanical Engineering
7.
Scientific-technical Union of Mechanical Engineering "Industry 4.0"
8.
The Japan Society of Mechanical Engineers