Wear resistant composites and coatings
TalTech priority area
Research classification (Frascati)
Head of the research group
Research group member
Doctoral students
Keyword
ceramic-based composite
cemented carbide
cermet
ceramic-matrix composite
coating
composite hardfacing
wear resistance
corrosion resistance
Overview
The R&D activities of the research group havebeen focused mainly on the following researchtopics and related industrial applications: (a)Co- and Ni-free WC-based cemented carbideswith alternative (considering critical materialssupply, environmental safety and healthcareaspects) Fe-based metallic binders; (b) W-free,TiC- and Ti(C,N)-based cermets with alternativeFe-based binders; (c) ceramic-matrix compositesbased on refractory compounds of Ti; (d) Fe-basedcomposite hardfacings; (e) diamond-based thincoatings.
Important results
technology of Co- and Ni-free WC-FeMnand TiC-FeCr composites; technology of TiN- and TiCN-based ceramic-matrix composites; advancement of diamond coatings for awide range of conditions; enhancement of functional properties ofthin PVD coatings.
Related projects
Related department
Publications related to the research group
- Kübarsepp, J., Juhani, K. Cermets with Fe-alloy binder : a review // International journal of refractory metals and hard materials (2020) vol. 92, art. 105290, 25 p. : ill.
https://doi.org/10.1016/j.ijrmhm.2020.105290 - Podgursky, V., Alamgir, A., Yashin, M., Jõgiaas, T., Viljus, M., Raadik, T., Danilson, M., Sergejev, F., Lümkemann, A., Kluson, J., Sondor, J., Bogatov, A. High-temperature tribological performance of Al2O3/a-C:H:Si coating in ambient air // Coatings (2021) vol. 11, 5, art. 495, 15 p. : ill.
https://doi.org/10.3390/coatings11050495 - Kolnes, M., Tarraste, M., Kübarsepp, J., Juhani, K., Viljus, M. In-situ alloying of TiC-FeCr cermets in manganese vapour // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 4, p. 533-539 : ill.
https://doi.org/10.3176/proc.2021.4.22 - Wang, Z., Xie, M., Li, Y., Kollo, L., Prashanth, K.G. et al. Premature failure of an additively manufactured material // Npg Asia materials (2020) vol. 12, 1, art. 30, 10 p. : ill.
https://doi.org/10.1038/s41427-020-0212-0 - Zhao, C., Wang, Z., Li, D., Kollo, L., Luo, Z., Zhang, W., Prashanth, K. G. Selective laser melting of Cu-Ni-Sn : a comprehensive study on the microstructure, mechanical properties, and deformation behavior // International journal of plasticity (2021) vol. 138, art. 102926.
https://doi.org/10.1016/j.ijplas.2021.102926 - Ummethala, R., Karamched, P.S., Kollo, L., Prashanth, K.G. et al. Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy // Materialia (2020) vol. 14, art. 100941.
https://doi.org/10.1016/j.mtla.2020.100941 - Kumar, R., Hussainova, I., Rahmani, R., Antonov, M. Solid lubrication at high-temperatures - a review // Materials (2022) vol. 15, 5, art. 1695.
https://doi.org/10.3390/ma15051695 - Kumar, R., Malaval, B., Antonov, M. et al. Performance of polyimide and PTFE based composites under sliding, erosive and high stress abrasive conditions // Tribology international (2020) Vol. 147, art. 106282.
https://doi.org/10.1016/j.triboint.2020.106282 - Soudagar, M. E. M., Khan, H. M., Khan, T. M. Y., Razzaq, L., Asif, T., Mujtaba, M. A., Hussain, A. et al. Experimental analysis of engine performance and exhaust pollutant on a single-cylinder diesel engine operated using moringa oleifera biodiesel // Applied sciences (2021) Vol. 11, 15, p. 7071−7089.
https://doi.org/10.3390/app11157071 - Zhao, C.; Wang, Z.; Li, D.; Kollo, L.; Luo, Z.; Zhang, W.; Prashanth, K. G. Cu-Ni-Sn alloy fabricated by melt spinning and selective laser melting: a comparative study on the microstructure and formation kinetics // Journal of materials research and technology (2020) vol. 9, 6, p. 13097−13105.
https://doi.org/10.1016/j.jmrt.2020.09.047 - Rahmani, R., Brojan, M., Antonov, M., Prashanth, K.G. Perspectives of metal-diamond composites additive manufacturing using SLM-SPS and other techniques for increased wear-impact resistance // International journal of refractory metals and hard materials (2020) vol. 88, art. 105192, 13 p. : ill.
https://doi.org/10.1016/j.ijrmhm.2020.105192 - Kumar, R., Antonov, M. Self-lubricating materials for extreme temperature tribo-applications // Materials today: proceedings (2021) vol. 44, 6, p. 4583-4589.
https://doi.org/10.1016/j.matpr.2020.10.824 - Karimi, J., Antonov, M., Kollo, L., Prashanth, K.G. Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy // Journal of alloys and compounds (2022) vol. 897, art. 163207.
https://doi.org/10.1016/j.jallcom.2021.163207 - Zhao, C., Wang, Z., Li, D., Xie, M., Kollo, L., Luo, Z., Zhang, W., Prashanth, K.G. Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders // Journal of alloys and compounds (2020) vol. 830, art. 154603, 5 p. : ill.
https://doi.org/10.1016/j.jallcom.2020.154603 - Tiismus, H., Kallaste, A., Belahcen, A., Tarraste, M., Vaimann, T., Rassõlkin, A., Asad, B., Shams Ghahfarokhi, P. AC magnetic loss reduction of SLM processed Fe-Si for additive manufacturing of electrical machines // Energies (2021) vol. 14, 5, 13 p. : ill.
https://doi.org/10.3390/en14051241 - Kumar, R., Antonov, M., Beste, U., Goljandin, D. Assessment of 3D printed steels and composites intended for wear applications in abrasive, dry or slurry erosive conditions // International journal of refractory metals and hard materials (2020) vol. 86, art. 105126, 9 p. : ill.
https://doi.org/10.1016/j.ijrmhm.2019.105126 - Lapkovskis, V., Mironovs, V., Kasperovich, A., Myadelets, V., Goljandin, D. Crumb rubber as a secondary raw material from waste rubber : a short review of end-of-life mechanical processing methods // Recycling (2020) vol. 5, 4, art. 32, 20 p. : ill.
https://doi.org/10.3390/recycling5040032 - Rahmani, R., Antonov, M., Brojan, M. Lightweight 3D printed Ti6Al4V-AlSi10Mg hybrid composite for impact resistance and armor piercing shielding // Journal of materials research and technology (2020) vol. 9, 6, p. 13842-13854 : ill.
https://doi.org/10.1016/j.jmrt.2020.09.108 - Alinejadian, N., Kollo, L., Odnevall, I. Progress in additive manufacturing of MoS2-based structures for energy storage applications – a review // Materials science in semiconductor processing (2022) Vol. 139, 21 p. : ill.
https://doi.org/10.1016/j.mssp.2021.106331 - Kumar, R., Antonov, M., Liu, L., Hussainova, I. Sliding wear performance of in-situ spark plasma sintered Ti-TiBw composites at temperatures up to 900 °C // Wear (2021) vol. 476, art. 203663, 9 p.: ill.
https://doi.org/10.1016/j.wear.2021.203663 - Medvedovski, E., Antonov, M. Erosion studies of the iron boride coatings for protection of tubing components in oil production, mineral processing and engineering applications // Wear (2020) vol. 452-453, art. 203277, 8 p. : ill.
https://doi.org/10.1016/j.wear.2020.203277 - Karimi, J., Kollo, L., Rahmani, R., Ma, P., Jia, Y. D., Prashanth, K. G. Selective laser melting of in-situ CoCrFeMnNi high entropy alloy : effect of remelting // Journal of Manufacturing Processes (2022) vol. 84, p. 55-63.
https://doi.org/10.1016/j.jmapro.2022.09.056 - Kübarsepp, J., Juhani, K., Tarraste, M. Abrasion and erosion resistance of cermets : a review // Materials (2022) vol. 15, 1, art. 69.
https://doi.org/10.3390/ma15010069 - Holovenko, Y., Kollo, L., Saarna, M., Rahmani, R., Soloviova, T., Antonov, M., Prashanth, K. G., Cygan, S., Veinthal, R. Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites // International journal of refractory metals and hard materials (2020) vol. 86, art. 105087, 10 p. : ill.
https://doi.org/10.1016/j.ijrmhm.2019.105087 - Maurya, H. S., Kosiba, K., Juhani, K., Sergejev, F., Prashanth, K. G. Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process // Additive manufacturing (2022) vol. 58, art. 103013, 13 p. : ill.
https://doi.org/10.1016/j.addma.2022.103013 - Sokkalingam, R., Tarraste, M., Mikli, V., Prashanth, K.G. et al. Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy // Journal of materials research (2020) vol. 35, 21, p. 2835−2847.
https://doi.org/10.1557/jmr.2020.272 - Maurya, H.S., Kollo, L., Juhani, K., Sergejev, F., Prashanth, K.G. Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets // Ceramics international (2022) vol. 48, 14, p. 20612-20618.
https://doi.org/10.1016/j.ceramint.2022.04.029 - Kumar, R., Antonov, M., Klimczyk, P., Mikli, V., Gomon, D. Effect of cBN content and additives on sliding and surface fatigue wear of spark plasma sintered Al2O3-cBN composites // Wear (2022) Vol. 494–495, art. 204250.
https://doi.org/10.1016/j.wear.2022.204250 - Rahmani, R., Kamboj, N., Brojan, M., Antonov, M., Prashanth, K. G. Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants // Materialia (2022) vol. 24, art. 101465.
https://doi.org/10.1016/j.mtla.2022.101465 - Laas, T., Laas, K., Paju, J.,Priimets, J., Shirookova, V., Antonov, M. et al. Behaviour of tungsten alloy with iron and nickel under repeated high temperature plasma pulses // Fusion engineering and design (2020) Vol. 151, art. 111408.
https://doi.org/10.1016/j.fusengdes.2019.111408 - Kumar, R., Liu, L., Antonov, M., Ivanov, R., Hussainova, I. Hot sliding wear of 88 wt.%TiB-Ti composites from SHS produced powders // Materials (2021) vol. 14, 5, art. 1242, 14 p.: ill.
https://doi.org/10.3390/ma14051242 - Alao, P.F., Marrot, L., Burnard, M,D., Saarna, M., Kers, J. Impact of alkali and silane treatment on hemp/PLA composites’ performance : from micro to macro scale // Polymers (2021) vol. 13, 6, art. 851, 18 p. : ill.
https://doi.org/10.3390/polym13060851 - Kumar, R., Antonov, M., Holovenko, Y., Surzenkov, A. Erosive wear resistance of nature-inspired flexible materials // Tribology letters (2020) vol. 68, 2, art. 51, 8 p. : ill.
https://doi.org/10.1007/s11249-020-01296-8 - Rahmani, R., Antonov, M., Prashanth, K. G. The impact resistance of highly densified metal alloys manufactured from gas-atomized pre-alloyed powders // Coatings (2021) vol. 11, 2, art. 216, 14 p. : ill.
https://doi.org/10.3390/coatings11020216 - Maurya, H.S., Kollo, L., Tarraste, M., Juhani, K., Sergejev, F., Prashanth, K.G. Effect of the laser processing parameters on the selective laser melting of TiC–Fe-based cermets // Journal of manufacturing and materials processing (2022) vol. 6, 2, art. 35, 11 p. : ill.
https://doi.org/10.3390/jmmp6020035 - Hussain, A., Podgurski, V., Goljandin, D., Antonov, M. TiAlN coatings tribology for textile machinery parts // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 2, p. 163-171 : ill.
https://doi.org/10.3176/proc.2021.2.04 - Maurya, H. S., Juhani, K., Sergejev, F., Prashanth, K. G. Additive manufacturing of TiC-based cermet with stainless steel as a binder material // Materials today: proceedings (2022) vol. 57, part 2, p. 824-828.
https://doi.org/10.1016/j.matpr.2022.02.428 - Kolnes, M., Kübarsepp, J., Sergejev, F., Kolnes, M., Tarraste, M., Viljus, M Performance of ceramic-metal composites as potential tool materials for friction stir welding of aluminium, copper and stainless steel // Materials (2020) vol. 13, 8, art. 1994, 18 p. : ill.
https://doi.org/10.3390/ma13081994 - Saai, A., Bjørge, R., Dahl, F., Antonov, M. et al. Adaptation of Laboratory tests for the assessment of wear resistance of drill-bit inserts for rotary-percussive drilling of hard rocks // Wear (2020) vol. 456-457, art. 203366, 10 p. : ill.
https://doi.org/10.1016/j.wear.2020.203366 - Alamgir, A., Yashin, M., Bogatov, A., Viljus, M. et al. High-temperature tribological performance of hard multilayer TiN-AlTiN/nACo-CrN/AlCrN-AlCrO-AlTiCrN coating deposited on WC-Co substrate // Coatings (2020) vol. 10, 9, art. 909, 10 p. : ill.
https://doi.org/10.3390/coatings10090909 - Alao, P., Tobias, M., Kallakas, H., Poltimäe, T., Kers, J., Goljandin, D. Development of hemp hurd particleboards from formaldehyde-free resins // Agronomy research (2020) vol. 18, S1, p. 679–688 : ill.
https://doi.org/10.15159/AR.20.127 - Awan, M. R., Specific energy modeling of abrasive cut off operation based on sliding, plowing, and cutting // Journal of materials research and technology (2022) vol. 18, p. 3302-3310.
https://doi.org/10.1016/j.jmrt.2022.03.185 - Konyashin, I., Antonov, M., Ries, B. Wear behaviour and wear mechanisms of different hardmetal grades in comparison with polycrystalline diamond in a new impact-abrasion test // International journal of refractory metals and hard materials (2020) vol. 92, art. 105286.
https://doi.org/10.1016/j.ijrmhm.2020.105286 - Hussain, A., Podgursky, V., Goljandin, D., Viljus, M., Antonov, M., Bogatov, A., Krasnou, I. Tribological and mechanical properties investigations of post-consumer cotton textiles // Solid state phenomena ; 320. : Trans Tech Publications Ltd, 2021. p. 97-102.
https://doi.org/10.4028/www.scientific.net/SSP.320.97 - Karimi, J., Antonov, M., Prashanth, K. G. Effect of wear debris entrapment on the tribological performance of AlCoCrFeNi produced by selective laser melting or spark plasma sintering // Metallurgical and Materials Transactions A (2022) vol. 53, 11, p. 4004-4010.
https://doi.org/10.1007/s11661-022-06805-z - Alinejadian, N., Kazemi, S. H., Grossberg-Kuusk, M., Kollo, L., Odnevall, I., Prashanth, K. G. Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutions // Materials today chemistry (2022) vol. 26, art. 101219.
https://doi.org/10.1016/j.mtchem.2022.101219 - Yang, X., Yagodzinskyy, Y., Ge, Y., Lu, E., Lehtonen, J., Kollo, L.,, Hannula, S.-P. Hydrogen effects in equiatomic CrFeNiMn alloy fabricated by laser powder bed fusion // Metals (2021) vol. 11, 6, art. 872.
https://doi.org/10.3390/met11060872 - Bendikiene, R., Ciuplys, A., Sertvytis, R., Surženkov, A., Tkachivskyi, D., Viljus, M., Traksmaa, R., Antonov, M., Kulu, P. Wear behaviour of Cr3C2-Ni cermet reinforced hardfacings // Journal of materials research and technology (2020) vol. 9, 4, p. 7068-7078 : ill.
https://doi.org/10.1016/j.jmrt.2020.05.042 - Kumar, R., Aydinyan, S., Ivanov, R., Liu, L., Antonov, M., Hussainova, I. High-temperature wear performance of hBN-added Ni-W composites produced from combustion-synthesized powders // Materials (2022) vol. 15, 3, art. 1252.
https://doi.org/10.3390/ma15031252 - Shaikh, A., Churyumov, A., Pozdniakov, A., Churyumova, T. Simulation of the hot deformation and fracture behavior of reduced activation ferritic/martensitic 13CrMoNbV steel // Applied sciences (2020) vol. 10, 2, art. 530 ; 12 p. : ill.
https://doi.org/10.3390/app10020530 - Hussain, A., Podgursky, V., Antonov, M., Viljus, M., Goljandin, D. TiCN coating tribology for the circular economy of textile industries // Journal of industrial textiles (2022) vol. 51, 5 suppl., p. 8947S-8959S.
https://doi.org/10.1177%2F15280837211025726 - Tõkke, S., Laas, T., Priimets, J., Mikli, V., Antonov, M. Impact of pulsed deuterium plasma irradiation on dual-phase tungsten alloys // Fusion engineering and design (2021) vol. 164, art. 112215, 10 p. : ill.
https://doi.org/10.1016/j.fusengdes.2020.112215 - Hussain, A., Podgurski, V., Goljandin, D., Antonov, M., Viljus, M. Tribology of alumina materials for the circular economy of manufacturing textile industries // Proceedings of the Estonian Academy of Sciences (2021) 3, lk. 215-220 : ill.
https://doi.org/10.3176/proc.2021.3.01 - Shahreza, B. O., Hernandez-Rodriguez, M. A. L., Garcia-Sanchez, E., Kommel, L., Sergejev, F. et al. The impact of microstructural refinement on the tribological behavior of niobium processed by Indirect Extrusion Angular Pressing // Tribology international (2022) vol. 167, art. 107412.
https://doi.org/10.1016/j.triboint.2021.107412 - Kaljuvee, T., Uibu, M., Einard, M., Traksmaa, R., Viljus, M., Jefimova, J., Trikkel, A. et al. Thermal behavior of ceramic bodies based on Estonian clay from the Arumetsa deposit with oil shale ash and clinker dust additives // Processes (2022) vol. 10, 1, art. 46.
https://doi.org/10.3390/pr10010046 - Laansoo, A., Kübarsepp, J., Surženkov, A., Land, R., Märtens, O., Viljus, M. Induction brazing of cermets to steel and eddy current testing of joint quality // Welding in the World (2020) vol. 64, 3, p. 563−571.
https://doi.org/10.1007/s40194-020-00854-x - Hussain, A., Podgursky, V., Goljandin, D., Antonov, M., Basit, M. A., Ahmad, T. Mild steel tribology for circular economy of textile industries // Tribology in Industry (2021) vol. 43, 4, p. 552-560.
https://doi.org/10.24874/ti.1050.02.21.04 - Omranpour, B., Kommel, L., Sergejev, F., Ivanisenko, J., Antonov, M. et al. Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 4, p. 540-548 : ill.
https://doi.org/10.3176/proc.2021.4.23 - Korobov, Y., Alwan, H., Soboleva, N., Antonov, M. et al Cavitation resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF coatings // Journal of Thermal Spray Technology (2022) vol. 31, 1-2, p. 234–246.
https://doi.org/10.1007/s11666-021-01242-7 - Martsepp, M., Laas, T., Laas, K., Priimets, J., Mikli, V., Antonov, M. Multifractal analysis of high-temperature plasma irradiated tungsten surfaces // Surface topography : metrology and properties (2021) Vol. 9, 3, 13 p. : ill.
https://doi.org/10.1088/2051-672X/ac1dc3 - Kumar, R., Torres, H., Aydinyan, S., Antonov, M., Varga, M., Rodriguez Ripoll, M., Hussainova, I. Microstructure and high temperature tribological behaviour of self-lubricating Ti-TiBx composite doped with Ni-Bi // Surface and coatings technology (2022) vol. 447, art. 128827.
https://doi.org/10.1016/j.surfcoat.2022.128827 - Hussain, A., Kamboj, N., Podgurski, V., Antonov, M., Goliandin, D. Circular economy approach to recycling technologies of post-consumer textile waste in Estonia : a review // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 1, p. 80-90 : ill.
https://doi.org/10.3176/proc.2021.1.07 - Hussain, A., Podgurski, V., Goljandin, D., Antonov, M., Kumar, R., Kamboj, N. K.,Rahmani Ahranjani, R., Viljus, M., Ahmad, T., Krumme, A., Krasnou, I. et al. Tribological and circular economy aspects of polypropylene/cotton fibre hybrid composite // Proceedings of the Estonian Academy of Sciences (2022) vol. 71, 2, p. 186-193 : ill.
https://doi.org/10.3176/proc.2022.2.03 - Lille, H., Ryabchikov, A., Peetsalu, P., Lind, L., Sergejev, F., Mikli, V., Kübarsepp, J. Residual stresses on various PVD hard coatings on tube and plate substrates // Coatings (2020) vol. 10, 11, art. 1054, 11 p.
https://doi.org/10.3390/coatings10111054 - Awan, M. R., Rojas, H. A. G., Hameed, S., Riaz, F., Hamid, S., Hussain, A. Machine learning-based prediction of specific energy consumption for cut-off grinding // Sensors (2022) vol. 22, 19, art. 7152.
https://doi.org/10.3390/s22197152 - Hussain, A., Podgursky, V., Antonov, M., Abbas, M. M., Rizwan, M. Tungsten carbide material tribology and circular economy relationship in polymer and composites industries // Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials : Design and Applications (2022) vol. 236, 10, p. 2066-2073.
https://doi.org/10.1177%2F14644207221096929 - Vikram, R.J., Kollo, L., Prashanth, K. G., Suwas, S. Investigating the structure, microstructure, and texture in selective laser melted sterling silver 925 // Metallurgical and Materials Transactions A (2021) vol. 52, 12, p. 5329–5341 : ill.
https://doi.org/10.1007/s11661-021-06471-7 - Varga, M., Rojacz, H., Widder, L., Antonov, M. High temperature erosion-corrosion of wear protection materials // Journal of Bio- and Tribo-Corrosion (2021) vol. 7, 3, art. 87.
https://doi.org/10.1007/s40735-021-00504-9 - Antonov, M., Zahavi, A., Kumar, R., Tamre, M., Klimczyk, P. Performance of Al2O3-cBN materials and the perspective of using hyperspectral imaging during cutting tests // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 4, p. 524-532 : ill.
https://doi.org/10.3176/proc.2021.4.21 - Zakaryan, M. K., Zurnachyan, A. R., Amirkhanyan, N. H., Kirakosyan, H. V., Antonov, M., Rodriguez, M. A., Aydinyan, S. V. Novel pathway for the combustion synthesis and consolidation of boron carbide // Materials (2022) vol. 15, 14, art. 5042.
https://doi.org/10.3390/ma15145042 - Podgurski, V., Yashin, M., Jõgiaas, T., Viljus, M., Alamgir, A., Danilson, M., Bogatov, A. High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions // Coatings (2020) vol. 10, 2, art. 175, 13 p. : ill.
https://doi.org/10.3390/coatings10020175 - Ovalı, D., Tarraste, M., Kaba, M., Ağaoğulları, D., Kollo, L., Prashanth, K. G., Lütfi Öveçoğlu, M. Spark plasma sintering of molybdenum silicides synthesized from oxide precursors // Ceramics international (2021) vol. 47, 10, p. 13827-13836 : ill.
https://doi.org/10.1016/j.ceramint.2021.01.248 - Michalczewski, R., Kalbarczyk, M., Słomka, Z., Hussainova, I., Liu, L., Antonov, M. Adhesion of AlCrN coating deposited on TiB2/Ti composites sinteredby SPS dedicated for high temperature tribological applications // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012010, 9 p.
https://doi.org/10.1088/1757-899X/1140/1/012010 - Alamgir, A., Bogatov, A., Jõgiaas, T., Viljus, M., Raadik, T., Kübarsepp, J., Sergejev, F., Lümkemann, A., Kluson, J., Podgursky, V. High-temperature oxidation resistance and tribological properties of Al2O3/ta-C coating // Coatings (2022) vol. 12, 4, art. 547.
https://doi.org/10.3390/coatings12040547 - Kaljuvee, T., Tõnsuaadu, K., Traksmaa, R., Einard, M. et al. Thermal behaviour of Estonian phosphorites from different deposits // Journal of thermal analysis and calorimetry (2020) Vol. 142, Issue 1, p. 437-449.
https://doi.org/10.1007/s10973-019-09056-0 - Tkachivskyi, D., Juhani, K., Surženkov, A., Kulu, P., Antonov, M., Goljandin, D. et al. HVOF sprayed Fe-Based wear-resistant coatings with carbide reinforcement, synthesized in situ and by mechanically activated synthesis // Coatings (2020) vol. 10, 11, art. 1092, 15 p. : ill.
https://doi.org/10.3390/coatings10111092 - Tarraste, M., Kübarsepp, J., Mere, A., Juhani, K., Kolnes, M., Viljus, M. Ultrafine cemented carbides with cobalt and iron binders prepared via reactive in situ sintering // Solid state phenomena ; 320. : Trans Tech Publications Ltd, 2021. p. 176-180.
https://doi.org/10.4028/www.scientific.net/SSP.320.176 - Jankauskas, V., Katinas, E., Laskauskas A., Antonov, M. et al. Effect of electrode covering composition on the microstructure, wear, and economic feasibility of Fe-C-Cr manual arc-welded hardfacings // Coatings (2020) vol. 10, 3, art. 294, 19 p. : ill.
https://doi.org/10.3390/coatings10030294 - Tarraste, M., Kübarsepp, J., Juhani, K., Kolnes, M., Viljus, M., Mere, A. Sintering of high Mn cemented carbides in Mn-rich environment // Defect and diffusion forum (2020) vol. 405, p. 402−407.
https://doi.org/10.4028/www.scientific.net/DDF.405.402 - Rüütmann, T., Annus, I., Kübarsepp, J., Läänemets, U., Umborg, J. Updated curriculum for engineering pedagogical continuing in-service education // Mobility for Smart Cities and Regional Development - Challenges for Higher Education : proceedings of the 24th International Conference on Interactive Collaborative Learning (ICL2021), Volume 2. Cham : Springer, 2022. p. 556-567. (Lecture Notes in Networks and Systems, vol. 390).
https://doi.org/10.1007/978-3-030-93907-6_59 - Sokkalingam, R., Tarraste, M., Surreddi, K.B., Traksmaa, R., Konda Gokuldoss, P. et al. Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying // Material design & processing communications (2020) vol. 3, 5, 9 p. : ill.
https://doi.org/10.1002/mdp2.175 - Tkachivskyi, D., Viljus, M., Traksmaa, R., Antonov, M., Surzhenkov, A., Juhani, K., Kulu, P. Comparative study of plasma cladded Fe-based composite hardfacings with in situ synthesized Cr and Ti carbide reinforcement // Solid state phenomena ; 320. : Trans Tech Publications, 2021. p. 83-89.
https://doi.org/10.4028/www.scientific.net/SSP.320.83 - Tõkke, S., Laas, T., Priimets, J., Tarraste, M., Mikli, V., Antonov, M. Effect of pulsed deuterium plasma irradiation on dual-phase tungsten high-entropy alloys // Fusion engineering and design (2022) Vol. 183, 11 p. : ill.
https://doi.org/10.1016/j.fusengdes.2022.113260 - Liu, L., Ivanov, R., Kumar, R., Minasyan, T., Antonov, M., Hussainova, I. Functionally gradient Ti6Al4V-TiB composite produced by spark plasma sintering // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012004, 6 p.: ill.
https://doi.org/10.1088/1757-899X/1140/1/012004 - Kulu, P., Goljandin, D., Viljus, M., Traksmaa, R., Gregor, A. Heat conductive plates from recycled niobium slag // Solid State Phenomena ; 320. : Trans Tech Publications, 2021. p. 169-175.
https://doi.org/10.4028/www.scientific.net/SSP.320.169 - Surženkov, A., Viljus, M., Antonov, M., Kübarsepp, J., Juhani, K., Kulu, P., Vägiström, H., Jankauskas, V., Leišys, R., Bendikiene, R., Adoberg, E., Peetsalu, P., Mere, A., Gregor, A. Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substrates // Surface and coatings technology (2022) vol. 446, art. 128771.
https://doi.org/10.1016/j.surfcoat.2022.128771 - Michalczewski, R., Kalbarczyk, M., Slomka, Z., Liu, L. Antonov, M., Hussainova, I. et al. The wear of PVD coated elements in oscillation motion at high temperature // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 4, p. 500-507 : ill.
https://doi.org/10.3176/proc.2021.4.18 - Kulu, P., Goljandin, D., Traksmaa, R., Kaljuvee, T., Gregor, A. Thermal properties of calcium-aluminate based materials // Proceedings of the Estonian Academy of Sciences (2021) vol. 70, 4, p. 508-515 : ill.
https://doi.org/10.3176/proc.2021.4.19 - Kulu, P., Goljandin, D., Traksmaa, R., Kaljuvee, T., Gregor, A. Thermal properties of calcium-aluminate based materials // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012028, 7 p. : ill.
https://doi.org/10.1088/1757-899X/1140/1/012028 - Antonov, M., Zahavi, A., Kumar, R., Tamre, M., Klimczyk, P. Performance of Al2O3-cBN materials and the perspective of using hyperspectral imaging during cutting tests // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012029, 5 p. : ill.
https://doi.org/10.1088/1757-899X/1140/1/012029 - Kiitam, I., Saarna, M., Taklaja, P., Tealane, M., Palu, I. Electrical and mechanical properties of service-aged medium voltage porcelain support insulators // 2020 6th IEEE International Energy Conference (ENERGYCon). Danvers : IEEE, 2020. p. 702-706.
https://doi.org/10.1109/ENERGYCon48941.2020.9236596 - Kolnes, M., Kübarsepp, J., Sergejev, F., Kolnes, M., Tarraste, M., Viljus, M. Wear behavior of ceramic-metal composites as tool material for FSW of copper // Solid state phenomena ; 320. Baech : Trans Tech Publications Ltd, 2021. p. 144–149.
https://doi.org/10.4028/www.scientific.net/SSP.320.144 - Michalczewski, R., Kalbarczyk, M., Słomka, Z., Osuch-Słomka, E., Łuszcz, M., Osuch-Słomka, E., Liu, L., Antonov, M., Hussainova, I. Sliding wear performance of AlCrN coating on TiB2/Ti composites at high temperatures // Materials (2021) 14, 22, art. 6771.
https://doi.org/10.3390/ma14226771 - Kolnes, M., Kübarsepp, J., Sergejev,F., Kolnes, M. Adhesive wear of WC- and TiC-based friction stir welding tool materials for aluminium alloy welding [Electronic resource] // European Powder Metallurgy Association : proceedings : 14 – 18 October 2018, Bilbao, Spain. : European Powder Metallurgy Association (EPMA), 2018. 6 p. : ill. [USB].
https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-proceedings-usb - Minasyan, T., Liu, L., Aydinyan, S., Kollo, L., Aghayan, M., Hussainova, I. Lattice of MoSi2/Si3N4 by selective laser melting // European Powder Metallurgy Association : proceedings : 14 – 18 October 2018, Bilbao, Spain. [S.l.] : European Powder Metallurgy Association (EPMA), 2018. art. 3993050 [USB].
https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-proceedings-usb - Kolnes, M., Tarraste, M., Kübarsepp, J., Juhani, K., Viljus, M. Alloying of TiC-FeCr cermet in manganese vapor // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012043.
https://doi.org/10.1088/1757-899X/1140/1/012043 - Kulu, P. Preface // Proceedings of the Estonian Academy of Sciences (2019) vol. 68, 2, p. 125.
http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-125.pdf - Omranpour, B., Kommel, L., Sergejev, F., Ivanisenko, J., Antonov, M. et al. Analysis of the reciprocal wear testing of Aluminum AA1050 processed by a novel mechanical nanostructuring technique // IOP conference series : materials science and engineering (2021) vol. 1140, art. 012051, 6 p. : ill.
https://doi.org/10.1088/1757-899X/1140/1/012051 - Abramov, M.A., Stepanov, E.G., Golyandin, D., Dobrokhotov, V.B. Research of the possibility of producing finely divided materials from natural raw materials for reactive powder concretes by mechanochemistry // Journal of physics : conference series (2019) vol. 666, 1, art. 012023, 5 p. : ill.
https://doi.org/10.1088/1757-899X/666/1/012023 - Lille, H., Ryabchikov, A., Kõo, J., Mikli, V., Adoberg, E., Vagiström, H., Kübarsepp, J., Peetsalu, P. Average residual stresses in hard Physical Vapor Deposited (PVD) coatings // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 20-25 : ill. (Key engineering materials ; 799).
https://doi.org/10.4028/www.scientific.net/KEM.799.20 https://www.scientific.net/KEM.799.20 https://www.ester.ee/record=b5235278*est - Juhani, K., Kübarsepp, J., Tarraste, M., Pirso, J., Viljus, M. Microstructure formation and performance of reactive sintered titanium oxycarbide base ceramic-ceramic composites // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 131-135 : ill. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.131 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.131 - Bogatov, A., Podgursky, V., Vagistrom, H., Yashin, M.. Shaikh, A.A., Viljus, M. et al. Transition from self-organized criticality into self-organization during sliding Si3N4 balls against nanocrystalline diamond films // Entropy (2019) vol. 21, 11, art. 1055 ; 12 p.
https://doi.org/10.3390/e21111055 - Pramono, A., Kollo, L., Kommel, L., Veinthal, R. High-strength aluminum alloy of ultrafine grained by consolidation-ECAP // IOP conference series : materials science and engineering (2019) vol. 478, 1, art. 012035, 7 p. : ill.
https://doi.org/10.1088/1757-899X/478/1/012035 - Tarraste, M., Kübarsepp, J., Juhani, K., Kolnes, M., Viljus, M. High energy milling of WС-FeСr cemented carbide // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 136-141 : ill. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.136 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.136 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Viljus, M. Effect of carbon stabilizing elements on WC cemented carbides with chromium steel binder // Materials science = Medžiagotyra (2019) vol. 25, 2, p. 202-206 : ill.
https://doi.org/10.5755/j01.ms.25.2.19619 - Paju, J., Väli, B., Laas, T., Shirokova, V., Antonov, M. et al. Corrigendum to "Generation and development of damages in double forged tungsten in different regimes of irradiation with extreme heat loads" [J. Nucl. Mater. 495 (2017) 91-102] // Journal of nuclear materials (2018) vol. 503, p. 323-324 : tab.
https://doi.org/10.1016/j.jnucmat.2018.03.003 - Katinas, E., Antonov, M., Jankauskas, V., Tarraste, M. The effect of spark plasma sintering thermal cycle on behaviour of Fe-based hardfacings reinforced with WC and WC-based hardmetal // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. [3]-8 : ill. (Key engineering materials ; 799).
https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.3 https://doi.org/10.4028/www.scientific.net/KEM.799.3 - Baroninš, J., Antonov, M., Bereznev, S., Raadik, T., Hussainova, I. Raman spectroscopy of multilayered AlCrN coating under high temperature sliding/oxidation // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 9-14. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.9 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.9 - Simson, T., Kulu, P., Surženkov, A., Ciuplys, A., Viljus, M., Zaldarys, G. Comparison of plasma transferred arc and submerged arc welded abrasive wear resistant composite hardfacings // Materials science = Medžiagotyra (2018) vol. 24, 2, p. 172-176 : ill.
https://doi.org/10.5755/j01.ms.24.2.19121 - Bendikiene, R., Surženkov, A., Tkachivskyi, D., Juhani, K., Viljus, M., Traksmaa, R., Antonov, M., Kulu, P. et al. Study of submerged and plasma arc welded composite hardfacings with a novel Cr3C2–Ni reinforcement // Proceedings of the Estonian Academy of Sciences (2019) vol. 68, 2, p. 150–157 : ill.
https://doi.org/10.3176/proc.2019.2.06 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-150-157.pdf - Gomon, D., Auriemma, F., Antonov, M. Assessment of abrasive powder behaviour during impact-abrasive wear of PCD elements // Wear (2019) vol. 426–427, Part A, p. 151-161 : ill.
https://doi.org/10.1016/j.wear.2019.03.024 - Minasyan, T., Liu, L., Aydinyan, S., Antonov, M., Hussainova, I. Selective laser melting of Ti/cBN composite // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 257-262 : ill. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.257 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.257 - Kolnes, M., Kübarsepp, J., Sergejev, F., Kolnes, M. Wear of potential tool materials for aluminium alloys friction stir welding at weld temperatures // Proceedings of the Estonian Academy of Sciences (2019) vol. 68, 2, p. 198–206 : ill.
https://doi.org/10.3176/proc.2019.2.12 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-198-206.pdf - Kulu, P., Goljandin, D., Külaviir, J., Hain, T., Kivisto, M. Recycling of niobium slag by disintegrator milling // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 97-102 : ill. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.97 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.97 - Leinemann, I., Pilvet, M., Kaljuvee, T., Traksmaa, R., Altosaar, M. Reaction pathway to CZTSe formation in CdI2 : Part 2: Chemical reactions and enthalpies in mixtures of CdI2–CuSe–SnSe and CdI2–CuSe–SnSe–ZnSe // Journal of thermal analysis and calorimetry (2018) vol. 134, Issue 1, p. 433–441.
https://doi.org/10.1007/s10973-018-7415-4 - Lapkovskis, V., Mironovs, V., Irtiseva, K., Goljandin, D. et al. Investigation of Devulcanised Crumb Rubber Milling and Deagglomeration in Disintegrator System // Key engineering materials (2019) vol. 800, p. 216−220.
https://doi.org/10.4028/www.scientific.net/KEM.800.216 - Lapkovskis, V., Mironovs, V., Irtiseva, K., Goljandin, D. Study of devulcanised crumb rubber-peat bio-based composite for environmental applications // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 148-152 : ill. (Key engineering materials ; 799).
https://www.scientific.net/KEM.799.148 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.148 - Jankauskas, V., Choteborsky, R., Antonov, M., Katinas, E. Modeling of microstructures and analysis of abrasive wear of arc-welded Hadfield steel // Journal of friction and wear (2018) vol. 39, 1, p. 78-84 : ill.
https://doi.org/10.3103/S1068366618010142 - Tkachivskyi, D., Juhani, K., Surženkov, A., Kulu, P., Viljus, M., Traksmaa, R., Jankauskas, V., Leišys, R. Production of thermal spray Cr3C2-Ni powders by mechanically activated synthesis // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 31-36 : ill. (Key engineering materials ; 799).
https://doi.org/10.4028/www.scientific.net/KEM.799.31 https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.31 - Umanskyi, O., Storozhenko, M., Koshelev, M., Antonov, M. Effect of FeNiCrBSiC-MeB2 material composition on the oxidation behavior at high temperatures // Powder metallurgy and metal ceramics (2019) vol. 57, 11-12, p. 670-678 : ill.
https://doi.org/10.1007/s11106-019-00030-x - Leinemann, I., Nkwusi, G., Timmo, K., Volobujeva, O., Danilson, M., Raudoja, J., Kaljuvee, T., Traksmaa, R., Altosaar, M., Meissner, D. Reaction pathway to Cu2ZnSnSe4 formation in CdI2 : part 1. Chemical reactions and enthalpies in mixtures of CdI2–ZnSe, CdI2–SnSe, and CdI2–CuSe // Journal of thermal analysis and calorimetry (2018) vol. 134, issue 1, p.409 - 421 : ill.
https://doi.org/10.1007/s10973-018-7102-5 - Holovenko, Y., Kollo, L., Jõeleht, M., Ivanov, R., Ivanov, R., Veinthal, R. Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding // Proceedings of the Estonian Academy of Sciences (2019) vol. 68, 2, p. 131–139 : ill.
https://doi.org/10.3176/proc.2019.2.02 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-131-139.pdf - Kallakas, H., Ayansola, S. G., Tumanov, T., Goljandin, D., Poltimäe, T., Krumme, A., Kers, J. Influence of birch false heartwood on the physical and mechanical properties of wood-plastic composites // Bioresources (2019) vol. 14, 2, p. 3554-3566 : ill.
https://doi.org/10.15376/biores.14.2.3554-3566 - Penezko, A., Kauk-Kuusik, M., Volobujeva, O., Traksmaa, R., Grossberg, M. Observation of photoluminescence edge emission in CuSbSe2 absorber material for photovoltaic applications // Applied physics letters (2019) vol. 115, 9, art. 092101, 4 p. : ill.
https://doi.org/10.1063/1.5114893 - Antonov, M., Ivanov, R., Holovenko, Y., Goljandin, D., Rahmaniahranjani, R., Kollo, L., Hussainova, I. 3D printing of plain and gradient cermets with efficient use of raw materials // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 239-245 : ill. (Key engineering materials ; 799).
https://doi.org/10.4028/www.scientific.net/KEM.799.239 https://www.scientific.net/KEM.799.239 https://www.ester.ee/record=b5235278*est - Rahmani, R.,Antonov, M. Axial and torsional buckling analysis of single- and multi-walled carbon nanotubes : finite element comparison between armchair and zigzag types // SN Applied Sciences (2019) vol. 1, art. 1134, 13 p. : ill.
https://doi.org/10.1007/s42452-019-1190-0 - Varga, M., Antonov, M., Tumma, M. et al. Solid particle erosion of refractories : A critical discussion of two test standards // Wear (2019) vol. 426–427, p. 552–561 : ill.
https://doi.org/10.1016/j.wear.2018.12.062 - Lapkovskis, V., Mironovs, V., Goljandin, D. Suitability of devulcanized crumb rubber for oil spills remediation // Energy procedia (2018) vol. 147, p. 351-357 : ill.
https://doi.org/10.1016/j.egypro.2018.07.103 - Podgurski, V., Bogatov, A., Yashin, M. et al. Relation between self-organization and wear mechanisms of diamond films // Entropy (2018) vol. 20, 4, art. 279, 16 p. : ill.
https://doi.org/10.3390/e20040279 - Umanskyi, O., Storozhenko, M., Antonov, M., Terentyev, O., Koval, O., Goljandin, D. Effect of thermal spraying method on the microstructure and wear behaviour of FeNiCrBSiC-CrB2 coating // Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia. Zurich : Trans Tech Publications, 2019. p. 37-42 : ill. (Key engineering materials ; 799).
https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.37 https://doi.org/10.4028/www.scientific.net/KEM.799.37 - Rahmani, R., Antonov, M., Kollo, L. Selective laser melting of diamond-containing or postnitrided materials intended for impact-abrasive conditions: experimental and analytical study // Advances in materials science and engineering (2019) vol. 2019, art. 4210762 ; 11 p. : ill.
https://doi.org/10.1155/2019/4210762 - Minasyan, T., Aghayan, M., Liu, L., Aydinyan, S., Kollo, L., Hussainova, I., Rodríguez, M. Combustion synthesis of MoSi2 based composite and selective laser sintering thereof // Journal of the European Ceramic Society (2018) vol. 38, 11, p. 3814-3821 : ill.
https://doi.org/10.1016/j.jeurceramsoc.2018.04.043 - Rahmani, R., Antonov, M., Kamboj, N. Modelling of impact-abrasive wear of ceramic, metallic, and composite materials // Proceedings of the Estonian Academy of Sciences (2019) vol. 68, 2, p. 191–197 : ill.
https://doi.org/10.3176/proc.2019.2.11 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-191-197.pdf - Kolnes, M., Mere, A., Kübarsepp, J., Viljus, M., Maaten, B., Tarraste, M. Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder // Powder metallurgy (2018) vol. 61, 3, p. 197-209 : ill.
https://doi.org/10.1080/00325899.2018.1447268 - Baroninš, J., Antonov, M., Bereznev, S., Raadik, T., Hussainova, I. Raman spectroscopy for reliability assessment of multilayered AlCrN coating in tribo-corrosive conditions [Online resource] // Coatings (2018) vol. 8, 7, art. 229, 12 p. : ill.
https://doi.org/10.3390/coatings8070229 - Podgurski V., Bogatov, A., Yashin, M., Viljus, M., Volobujeva, O., Mere, A., Raadik, T. et al. A comparative study of the growth dynamics and tribological properties of nanocrystalline diamondfilms deposited on the (110) single crystaldiamond and Si(100) substrates // Diamond and related materials (2019) vol. 92, p. 159-167 : ill.
https://doi.org/10.1016/j.diamond.2018.12.024 - Storozhenko, M., Umanskyi, O., Antonov, M. et al. Wetting and interfacial behaviour in the TiB2-NiCrBSiC system // Journal of alloys and compounds (2019) vol. 778, p. 15-22 : ill.
https://doi.org/10.1016/j.jallcom.2018.11.102 - Rahmani, R., Antonov, M., Kollo, L. Wear resistance of (Diamond-Ni)-Ti6Al4V gradient materials prepared by combined selective laser melting and spark plasma sintering techniques // Advances in tribology (2019) vol. 2019, art. 5415897, 12 p. : ill.
https://doi.org/10.1155/2019/5415897 - Holovenko, Y., Antonov, M., Kollo, L., Hussainova, I. Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions // Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology (2018) vol. 232, 1, p. 43-53.
https://doi.org/10.1177/1350650117738920 - Rahmani, R., Rosenberg, M., Ivask, A., Kollo, L. Comparison of mechanical and antibacterial properties of TiO2/Ag ceramics and Ti6Al4V-TiO2/Ag composite materials using combined SLM-SPS techniques // Metals (2019) vol. 9, 8, art. 874, 13 p. : ill.
https://doi.org/10.3390/met9080874 - Minasyan, T., Liu, L., Aghayan, M., Kollo, L., Kamboj, N., Aydinyan, S., Hussainova, I. A novel approach to fabricate Si3N4 by selective laser melting // Ceramics international (2018) vol. 44, 12, p. 13689-13694 : ill.
https://doi.org/10.1016/j.ceramint.2018.04.208 - Zhang, W., Qin, P., Wang, Z., Kollo, L., Prashanth, K.G. et al. Superior wear resistance in EBM-Processed TC4 alloy compared with SLM and forged samples // Materials (2019) vol. 12, 5, art. 782.
https://doi.org/10.3390/ma12050782 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Kolnes, M., Viljus, M., Maaten, B. Ferritic chromium steel as binder metal for WC cemented carbides // International journal of refractory metals and hard materials (2018) vol. 73, p. 183-191 : ill.
https://doi.org/10.1016/j.ijrmhm.2018.02.010 - Rahmani, R., Antonov, M., Kollo, L., Holovenko, Y., Prashanth, K. G. Mechanical behavior of Ti6Al4V scaffolds filled with CaSiO3 for implant applications // Applied sciences (2019) vol. 9, 18, art. 3844, 11 p. : ill.
https://doi.org/10.3390/app9183844 - Antonov, M., Afshari, H., Baroninš, J., Adoberg, E., Raadik, T., Hussainova, I. The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating // Tribology international (2018) vol. 118, p. 500-514 : ill.
https://doi.org/10.1016/j.triboint.2017.05.035 - Hussain, A., Goljandin, D., Podgursky, V., Abbas, M. M., Krasnou, I. Experimental mechanics analysis of recycled polypropylene-cotton composites for commercial applications // Advanced industrial and engineering polymer research (2023) vol. 6, 3, p. 226-238 : ill.
https://doi.org/10.1016/j.aiepr.2022.11.001