Abrasive impact wear: tester, wear and grindability studies = Abrasiivlöökkulumine: seade, kulumise ja jahvatatavuse uuringudTarbe, Riho2009 https://digi.lib.ttu.ee/i/?435 https://www.ester.ee/record=b2499200*est

Abrasivity and grindability study of mineral oresKulu, Priit; Tarbe, Riho; Käerdi, Helmo; Goljandin, DmitriWear2009 / 11, p. 1832-1837 : ill

Al-SiC nanocomposites produced by high-energy milling and hot pressingKollo, Lauri; Bradbury, Christopher R.; Leparoux, Marc18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 25 : ill

Angularity evaluation of milled WC-Co powderKulu, Priit; Mikli, Valdek; Käerdi, Helmo; Besterci, MichalInternational journal of materials & product technology2005 / p. 289-298 : ill

Characterisation of milled bromosodalite powder by XRPD and TEM methodsMändar, H.; Haav, A.; Mikli, Valdek; Paat, Aadu; Felsche, J.Sixteenth European Crystallographic Meeting (ECM-16) : Lund, Sweden, 6-11 August 1995 : [abstracts]1995 / P06-09, p. 52

Characterisation of TiC powders milled by attritor techniqueLetunovitš, Sergei; Kommel, Lembit; Viljus, Mart; Pirso, JüriProceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia2000 / p. 153-156 : ill

Characterization of disintegrator milled hardmetal powderKulu, Priit; Mikli, Valdek; Käerdi, Helmo; Besterci, MichalPowder metallurgy progress2003 / p. 39-48 : ill

Characterization of mechanically milled cermet powders produced by disintegrator technologyKäerdi, Helmo; Goljandin, Dmitri; Kulu, Priit; Sarjas, Heikki; Mikli, ValdekEngineering materials and tribology2013 / p. 148-153 https://www.scientific.net/KEM.527.148

Characterization of metallic powders produced by mechanical millingMikli, Valdek; Kulu, Priit; Zimakov, Sergei; Käerdi, HelmoMedžiagotyra = Materials science1999 / 2, p. 19-21: ill

Characterization of metallic powders produced by mechanical millingMikli, Valdek; Kulu, Priit; Zimakov, Sergei; Käerdi, HelmoProceedings of the 8th International Baltic Conference : Materials Engineering-99 : September 23-24, Kaunas, Lithuania1999 / p. 153

Chemical pre-treatment of mechanically milled recycled hardmetal powdersZikin, Arkadi; Yung, Der-Liang; Hussainova, Irina; Ilo, S.Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 777-782 : ill

Complete milling technologies of different valuable materialsSannik, U.; Pappel, ToivoProceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia2004 / p. 152-154

Disintegrator milling system development and milling technologies of different materials = Desintegraatorjahvatussüsteemi arendus ja erinevate materjalide desintegraatorjahvatustehnoloogiadGoljandin, Dmitri2013 https://digi.lib.ttu.ee/i/?937 https://www.ester.ee/record=b2994890*est

Disintegrators and disintegrator treatment of materialsGoljandin, Dmitri; Kulu, Priit2015

Effect of attrition milling on grain size and properties of compositesKommel, Lembit; Kimmari, Eduard; Traksmaa, RainerEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 25

Effect of milling activation of dry components on properties of foamed cement mortar in a two-stage manufacturing processBaroninš, Janis; Shishkin, Andrei; Lusis, Vitalijs; Giosue, Chiara; Goljandin, Dmitri; Novakova, Iveta; Kekez, Sofija; Korjakins, Aleksandrs; Gorelikovs, Dmitrijs; Gavrilovs, PavelsCase studies in construction materials2025 / art. e04465 https://doi.org/10.1016/j.cscm.2025.e04465

Electron microscopy and image analysis study of powdered hardmetal materials and optoelectronic thin filmsMikli, Valdek2003 https://www.ester.ee/record=b1782316*est

Fibrillation of aspen by alkaline cold pre-treatment and vibration millingKärner, Kärt; Elomaa, Matti Antero; Kallavus, UrveMaterials science = Medžiagotyra2016 / p. 358-363 : ill https://doi.org/10.5755/j01.ms.22.3.7412 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

High-energy ball milling of Nd-Fe-B powdersMural, Zorjana; Kollo, Lauri; Kallip, Kaspar; Traksmaa, Rainer; Veinthal, RennoProceedings of the Applied Magnetic Materials 2013 Conference2013 / p. 12-16 : ill

Impact grinding and disintegratorsTamm, Boris, inform.; Tümanok, AlekseiProceedings of the Estonian Academy of Sciences. Engineering1996 / p. 209-223 https://www.ester.ee/record=b1072098*est

Investigation of Devulcanised Crumb Rubber Milling and Deagglomeration in Disintegrator SystemLapkovskis, Vjaceslavs; Mironovs, Viktors; Irtiseva, Kristine; Goljandin, Dmitri; Shishkin, AndreiKey engineering materials2019 / p. 216−220 https://doi.org/10.4028/www.scientific.net/KEM.800.216 Conference proceeding at Scopus Article at Scopus

Investigation of planetary milling for nano-silicon carbide reinforced aluminium metal matrix compositesKollo, Lauri; Leparoux, Marc; Bradbury, Christopher R.; Jäggi, Christian; Carreno-Morelli, Efrain; Rodriguez-Arbaizar, MikelJournal of alloys and compounds2010 / p. 394-400 : ill https://www.sciencedirect.com/science/article/abs/pii/S0925838809018738

Jahvatuse mõju rauapulbri omadusteleLetunovitš, S.; Kulu, PriitXXXII üliõpilaste teaduslik-tehnilise konverentsi ettekannete teesid : pühendatud V. I. Lenini 110. sünniaastapäevale : 16.-18. aprill 19801981 / lk. 118-119 https://www.ester.ee/record=b1322611*est

Jahvatustehnilistest uuringutest TPI-sRajur, Kaido; Õispuu, LeoKõrgema tehnilise hariduse ja tehnilise mõtte areng Eestis1989 / lk. 34-44

Jet milling of the powders for Nd-Fe-B sintered magnetsMural, Zorjana; Kollo, Lauri; Veinthal, Renno2014 International Conference on NdFeB Magnets : Supply Chain, Critical Properties, & Applications : proceedings : March 2-5th, 2014, New Century Grand Hotel Ningbo2014 / p. 180-183 : ill

Kinetics of fine material particles in a disintegratorTamm, Jaan; Tadolder, JüriOST-97 Symposium on Machine Design, Tallinn, Estonia, May 22-23, 1997 : proceedings1997 / p. 16-24: ill https://www.ester.ee/record=b1083704*est

Mechanochemistry: a disruptive innovation for the industry of the futureBalaž, Matej; Vella-Zarb, Liana; Hernandez, Jose G.; Halasz, Ivan; Crawford, Deborah E.; Krupička, Martin; Vania, Andre; Niidu, Allan; Garcia, Felipe; Maini, Lucia; Colacino, EvelinaChimica oggi-chemistry today2019 / p. 32−34 https://www.teknoscienze.com/tks_article/mechanochemistry-a-disruptive-innovation-for-the-industry-of-the-future/

Metal powders produced by disintegrator millingTümanok, Aleksei; Kulu, PriitMaterials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia1998 / p. 3-8: ill

Metal powders produced by disintegrator milling from industrial wastesTümanok, Aleksei; Kulu, Priit; Goljandin, DmitriAbstract book of 4th ASM International Conference and Exhibition on the Recycling of Metals : Vienna, Austria, 19991999 / p. 20

Metal powders produced by disintegrator milling from the industrial wastesTümanok, Aleksei; Kulu, Priit; Goljandin, Dmitri4th ASM International Conference and Exhibition on the Recycling of Metals : book of proceedings : 17-18 June, 1999, the Forum Hotel Vienna, Vienna, Austria1999 / p. 309-318 : ill

Metallic powders for thermal spray produced by disintegrator millingZimakov, Sergei; Kulu, Priit; Goljandin, DmitriProceedings of Joint Nordic Conference in Powder Technology2002 / p. 40

Metallic powders produced by disintegrator millingKulu, Priit; Tümanok, Aleksei; Zimakov, SergeiProceedings of Joint Nordic Conference in Powder Technology : May 5-6, 1999, Oslo, Norway1999 / p. 5

Micropowders produced by disintegrator millingPeetsalu, Priidu; Zimakov, Sergei; Goljandin, Dmitri; Kulu, Priit; Mikli, Valdek; Käerdi, HelmoEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 32-33 http://www.imr.saske.sk/pmp/issue/2-2003/pmp_vol03_no2_p099-110.pdf

On inner friction factor of fine powdersTamm, Jaan; Tadolder, JüriOST-96 Symposium on Machine Design, [Stockholm], May 13-14, 1996 : program, abstracts1996 / [1] p https://kirj.ee/wp-content/plugins/kirj/pub/eng-1-1997-35-49_20230201200456.pdf

On inner friction factor of fine powders and application for calculation of material movement in impact millsTamm, Jaan; Tümanok, Aleksei; Tadolder, JüriOST-95 Symposium on Machine Design : proceedings, Oulu, Finland, May 18-19, 19951995 / p. 112-121: ill https://www.ester.ee/record=b1033949*est

Performance evaluation of cement mortar and concrete with incorporated micro fillers obtained by collision milling in disintegratorBumanis, Girts; Bajare, Diana; Goljandin, DmitriCeramics-silikáty2017 / p. 231-243 : ill https://doi.org/10.13168/cs.2017.0021 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Phase evolution during high energy cube milling of Ti-6Al-4V-0.5 vol% TiC powders using heptane and tin as process control agents (PCAs)Kishore Babu, N.; Kallip, Kaspar; Leparoux, MarcAdvanced engineering materials2017 / art. 1600662, p. 1-6 : ill http://dx.doi.org/10.1002/adem.201600662

Recycling of niobium slag by disintegrator millingKulu, Priit; Goljandin, Dmitri; Külaviir, Jaan; Hain, Tiina; Kivisto, MartModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 97-102 : ill https://www.scientific.net/KEM.799.97 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.97 Conference proceeding at Scopus Article at Scopus

Recycling of secondary raw materials for the production of new composite products: a devulcanised crumb rubber case studyLapkovskis, Vjaceslavs; Mironovs, Viktors; Kristine, I.; Goljandin, Dmitri11th International Conference Biosystems Engineering : May 6-8, 2020 in Tartu, Estonia : book of abstracts [Võrguteavik]2020 / p. 130 https://www.ester.ee/record=b5347289*est

Retreatment of industrial plastic wastes by high energy disintegrator millsKers, Jaan; Kulu, PriitREWAS'04 : Global Symposium on Recycling, Waste Treatment and Clean Technology : [proceedings of the "Rewas'04", held in Madrid, Spain, September 26-29, 2004]. Volume III2004 / p. 2795-2796 : ill

Retreatment of polymer wastes by disintegrator millingKulu, Priit; Goljandin, DmitriWaste material recycling in the circular economy. Ed. by Dimitris S. Achilias2021 / p. 80-121 : ill https://doi.org/10.5772/intechopen.99715

The properties of mineral additives obtained by collision milling in disintegratorBumanis, Girts; Goljandin, Dmitri; Bajare, DianaEngineering materials and tribology XXV2017 / p. 327-331 https://doi.org/10.4028/www.scientific.net/KEM.721.327 Conference proceedings at Scopus Article at Scopus

Дезинтеграторная установка для исследования процесса износа и измельченияVainu, J.Трение и износ в машинах. 141987 / с. 19-24

Зависимость скорости гашения извести от тонины помолаRäni, Ahto; Randma, I.; Lõhmus, H.; Randma, HeinoСборник трудов (НИПИсиликатобетон), 31968 / с. 64-72: илл. https://www.ester.ee/record=b1764431*est

Изучение размола угля в дезинтеграторе-сепвратореTamm, Jaan; Tümanok, AlekseiX Юбилейный всесоюзный симпозиум по механоэмиссии и механохимии твердых тел (24-26 сент. 1986 г., г. Ростов н/Д) : Тезисы докладов1986 / с. [?]

Исследование многоступенчатого размола сланцев в лабораторных установкахPolfjorov, K.; Semenov, A.; Prikk, Arvi; Õispuu, Leo; Tšelištšev, N.; Ivanov, S.Теплоэнергетика : сборник статей. 151976 / с. 3-18 : ил https://www.ester.ee/record=b2190745*est https://digikogu.taltech.ee/et/Item/d869210f-7c07-4892-a311-44b646f3310e

Исследование процесса размола эстонских сланцев : автореферат ... кандидата технических наукÕispuu, Leo1966 http://www.ester.ee/record=b1569740*est

Некоторые энергетические аспекты сепарационого измельчения в дезинтегратореTümanok, Aleksei; Tamm, JaanУДА-технология : тезисы докладов III семинара, 4-6 сентября 1984 г.1984 / с. 30-31 : илл https://www.ester.ee/record=b1569821*est

О влиянии влажности сланца на эффективность размолаRajur, Kaido; Õispuu, LeoИсследования проблем работы парогенераторов электростанций1978 / с. 29-35 : илл https://www.ester.ee/record=b1305007*est https://digikogu.taltech.ee/et/Item/0b775307-30d6-4b2a-886c-d3671cfebcd6

О математическом описании гранулометрического состава мельничного продукта при грубом измельчении горючего сланца в центробежно-отражательной мельницеPihu, Tõnu; Rips, AndrusПроблемы работы котельных установок тепловых электростанций1988 / с. 26-33

О помоле сланцезольного портландцементаPiksarv, Evald; Kikas, Verner; Noormets, H.; Uustalu, EnnСборник трудов по изучению золы сланца-кукерсита. 61972 / с. 25-31 : илл https://www.ester.ee/record=b2190533*est https://digikogu.taltech.ee/et/Item/29889133-4a49-423b-82d3-22a748732c52

Перераспределение серы в процессах размола и озоления березовского угляMahlapuu, Aime; Nuutre, Maaris; Ots, Arvo; Paist, Aadu; Poobus, ArviИсследование работы парогенераторов электростанций1979 / с. 13-21 : илл https://www.ester.ee/record=b1271273*est https://digikogu.taltech.ee/et/Item/aa46d054-b6b8-4ad0-bfd6-b9ce1a581794

Применение измельченных отрубей при выработке нового сорта хлебаVeskus, Tiina; Kann, Aino; Kesküla, J.; Einborn, IlliВопросы повышения качества пищевых продуктов1988 / с. 11-22

Распределение минеральной части по фракциям пыли березовского угляPrikk, Arvi; Maarend, Jaak; Soone, L.Влияние минеральной части энергетических топлив на условия работы парогенераторов : материалы Всесоюзной конференции. Том 1, Превращение неорганической части топлива в топочном пространстве и механизм загрязнения поверхностей нагрева1974 / с. 18-26 : илл., таб https://www.ester.ee/record=b1294605*est

Рациональный выбор эмпирического закона распределения для описания продукта измельченияTümanok, Aleksei; Tamm, JaanИзвестия Сибирского отделения Академии наук СССР. Серия химических наук1983 / с. 8-11 : илл https://www.ester.ee/record=b1538903*est

Управления кинетики измельченияTümanok, Aleksei; Tamm, Jaan; Suur, UnoТехнология сыпучих материалов - Химтехника 86 : Тезисы докладов к предстоящей всесоюзной конференции, Белгород, 16-18 сент. 1986 г.1986 / с. [?]

Характеристики разделения сепаратора промышленной сланцеразмольной мельницыRajur, Kaido; Õispuu, LeoИсследование работы парогенераторов электростанций1979 / с. 23-29 : илл https://www.ester.ee/record=b1271273*est https://digikogu.taltech.ee/et/Item/aa46d054-b6b8-4ad0-bfd6-b9ce1a581794