Ab initio calculations of elastic properties of isotropic and oriented Ti(1-x)AlxN hard coatingsPodgurski, VitaliJournal of physics D : applied physics2007 / 13, p. 4021-4026

Abrasion-erosion wear of powder coatingsKulu, Priit; Zimakov, SergeiAbstracts of 12th International Conference on Wear of Materials, April 25-29, 1999, Atlanta (Georgia), USA1999 / p. 37

Abrasive impact wear resistance of hardfacingsKulu, Priit; Surženkov, Andrei; Tarbe, Riho; Simson, TaaviEuropean Conference on Heat Treatment and 22nd IFHTSE Congress : Heat Treatment and Surface Engineering from tradition to innovation : Venice (Italy), 20-22 May 20152015 / [9] p. : ill

Abrasive wear resistance of HVOF sprayed and PTA-welded hardmetal hard phase reinforced metal-matrix based coatingsTarbe, Riho; Kulu, Priit; Zikin, Arkadi; Surženkov, AndreiEngineering materials & tribology XXII2014 / p. 3-7 https://doi.org/10.4028/www.scientific.net/KEM.604.3 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Abrasive wear resistant composite hardfacings with ex-situ and in-situ synthesized carbide reinforcement = Abrasiivkulumiskindlad komposiitpinded ex-situ ja in-situ sünteesitud karbiidkõvafaasigaTkachivskyi, Dmytro2021 https://doi.org/10.23658/taltech.41/2021 https://digikogu.taltech.ee/et/Item/4ee05e38-b68b-4bb6-a708-6f2b8159f947

Adhesion of coatings produced by the controlled wire - explosion spraying techniqueVilys, Jonas; Ciuplys, Vytautas; Kvedaras, ValdasInternational DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference 25-27th September 1997, Tallinn, Estonia1997 / p. 169-171: ill

Advanced chromium carbide based hardfacingsZikin, Arkadi; Hussainova, IrinaSurface & coatings technology2012 / p. 4270-4278 : ill

Advanced multifunctional materials and their applicationsAntonov, Maksim; Hussainova, Irina; Kers, Jaan; Kulu, Priit; Kübarsepp, Jakob; Veinthal, RennoResearch in Estonia : present and future2011 / p. 146-167

ALD applied to conformal rare-earth coating of ZnO nanoparticles for low temperature thermal imaging applicationsRauwel, Erwan; Galeckas, Augustinas; Rauwel, ProtimaECS transactions2014 / p. 23-31 : ill https://doi.org/10.1149/06409.0023ecst Conference proceedings at Scopus Article at Scopus Article at WOS

Application of composite thermal sprayed coatingsKulu, Priit; Tarbe, Riho; Zimakov, SergeiProceedings of International Surface Engineering Congress (ISEC) : 15-18 May 2006, Seattle, USA2006 / p. 19-25 : ill

Application of thermally sprayed coatings in Belarus RepublicVitiaz, P.; Ivashko, V.; Ilyuschenko, A.; Okovity, V.; Sobolevsky, S.International DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference 25-27th September 1997, Tallinn, Estonia1997 / p. 125-129: ill

Arkadi Zikin - uute pindade looja : [intervjuu doktorandiga]Karu, VeikoInseneeria2013 / lk. 20-21 : fot https://artiklid.elnet.ee/record=b2611915*est

Armor materials' behavior under repetitive dense plasma shotsShirokova, Veroonika; Laas, Tõnu; Mikli, ValdekPhysica scripta2014 / Art. 014045, 5 p. : ill https://doi.org/10.1088/0031-8949/2014/T161/014045 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditionsAntonov, Maksim; Hussainova, Irina; Sergejev, Fjodor; Kulu, Priit; Gregor, AndreWear2009 / p. 898-906 : ill

Atomic layer deposition of titanium oxide films on As-synthesized magnetic Ni particles: magnetic and safety propertiesUudeküll, Peep; Kozlova, Jekaterina; Mändar, Hugo; Link, Joosep; Sihtmäe, Mariliis; Käosaar, Sandra; Blinova, Irina; Kasemets, Kaja; Kahru, Anne; Stern, RaivoJournal of magnetism and magnetic materials2017 / p. 299-304 : ill https://doi.org/10.1016/j.jmmm.2017.01.045 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Automatic evaluation of the structure parameters of WC-Co thermal spray coating by image analysis techniquesPeetsalu, Priidu; Mikli, Valdek; Ratas, Kaarin; Kulu, Priit18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 49

Betoonist teed ei ole liigne luksus, vaid arukas kokkuhoidVill, AntsPostimees2021 / Lk. 12 : ill https://dea.digar.ee/article/postimees/2021/01/13/10.5

Bussiootekodade pingid saavad katte : [kattematerjalide soojusjuhtivuse uuringud TTÜst]Tooming, UrmasPostimees2008 / 12. dets., lk. 9

Calibration methods of coating thickness gauges = Pindepaksuse mõõtevahendite kalibreerimismeetodite uurimineAbiline, Indrek2008 http://www.ester.ee/record=b2431359*est

Calibration methods of coating thickness standards = Pindepaksusetalonide kalibreerimismeetodidRiim, Jürgen2011 https://digi.lib.ttu.ee/i/?608

Calibration of coating thickness gaugesAbiline, Indrek; Laaneots, Rein; Nanits, Mats-MaiduProceedings 10th IMEKO TS7 International Symposium on Advances of Measurement Science : June 30-July2, 2004, Saint-Petersburg, Russia. Vol. 22004 / p. 372-375 : ill

Calibration of coating thickness gaugesAbiline, Indrek; Laaneots, Rein; Nanits, Mats-MaiduProceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia2004 / p. 117-119 : ill

Calibration of coating thickness gaugesLaaneots, Rein; Põdra, PriitMETROLOGIE 97 : 8e Congres International de Metrologie, Besancon-France, 20 au 23 octobre 1997 : actes des conferences1997 / p. 59-64: ill

Cavitation resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF coatingsKorobov, Yuri; Alwan, H.; Soboleva, Natalia; Antonov, MaksimJournal of Thermal Spray Technology2022 / p. 234–246 https://doi.org/10.1007/s11666-021-01242-7 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Characterisation of TiC-NiMo reinforced Ni-based hardfacingZikin, Arkadi; Badisch, Ewald; Hussainova, Irina; Tomastik, C.; Danninger, HerbertSurface & coatings technology2013 / p. 36-44 : ill https://www.sciencedirect.com/science/article/pii/S0257897213001825 https://doi.org/10.1016/j.surfcoat.2013.02.027 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Characterisation of TiC-NiMo reinforced NiCrBSi hardfacingZikin, Arkadi; Hussainova, Irina; Badisch, Ewald; Danninger, HerbertProceedings 20th IFHTSE : International Federation for Heat Treatment and Surface Engineering Congress : Beijing, China, October 23-25, 20122012 / p. 535-540 https://www.sciencedirect.com/science/article/pii/S0257897213001825

Characterisation of ultrasonically sprayed InxSy buffer-layers for Cu(In,Ga)Se2 solar cellsErnits, Kaia; Bremaud, D.; Mellikov, EnnThin solid films2007 / 15, p. 6051-6054 https://www.sciencedirect.com/science/article/abs/pii/S0040609006016178

Characterization of coating systems by indentation methodKulu, Priit; Gregor, Andre; Saarna, Mart; Sivitski, Alina; Sergejev, Fjodor; Surženkov, AndreiActa metallurgica Slovaca conference2010 / 1, p. 616-624 : ill

Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings [Electronic resource]Kulu, Priit; Veinthal, RennoProceedings of XIIth International Conference on Composites/Nano Engineering : ICCE-12 : Tenerife, Spain2005 / ? p. [CD-ROM]

Characterization of the structure and properties of composite powder materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoMaterials science = Medžiagotyra2005 / 4, p. 376-380 : ill

Characterization of WC-Co composite thermal spray powder and coatingPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, Priit15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 52-53

Characterization of WC-Co composite thermal spray powders and coatingsPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 435-444 : ill

Characterization of WC-Co thermal spray coatings based on the composite powdersPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitPowder metallurgy progress : journal of science and technology of particle materials2006 / p. 34-41 : ill

Coating of ammonium nitrate prills with limestone and dolomite powdersKlimova, Irina; Trubatšenko, Marina; Kaljuvee, Tiit; Mikli, ValdekWCPT6 2010 : World Student Congress on Particle Technology : Delft, The Netherlands, April 22-25, 2010 : book of abstracts, conference program2010 / p. 50 : ill

Coefficient of thermal expansion, modulus of elasticity and residual stresses of some powder coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasAbstracts of Scientific Conference Civil Engineering'99, 1999, Jelgava1999 / p. 12

Comparative analysis of HVAC cable metallic sheath modelling approaches for network studiesKangro, Triin; Kilter, Jako; De Silva, Jeewantha2018 18th International Conference on Harmonics and Quality of Power (ICHQP 2018) : Ljubljana, Slovenia, 13 – 16 May 20182018 / 6 p. : ill https://doi.org/10.1109/ICHQP.2018.8378924

Comparative analysis of residual stresses determined by various methods in brush-plated hard gold and silver coatingsLille, Harri; Kõo, Jakub; Ryabchikov, Alexander; Reitsnik, Renno; Sergejev, Fjodor; Mikli, ValdekEngineering materials & tribology XXII2014 / p. 8-11 https://doi.org/10.4028/www.scientific.net/KEM.604.8 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methodsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Toropov, Stanislav; Veinthal, Renno; Surženkov, AndreiProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [II]2010 / p. 474-479

Comparative study of siox layers deposition using thermal and uv-assisted curing of perhydropolysilazaneShmagina, Elizaveta; Bereznev, SergeiGSFMT Scientific Conference 2021 : Tartu, June 14-15, 2021 : abstracts2021 / P 50 https://fmtdk.ut.ee/wp-content/uploads/2021/06/GSFMT_abstractbook_2021.pdf

Comparative study of the PVD coatings on the plasma nitrided steelSurženkov, Andrei; Põdra, Priit; Sergejev, Fjodor; Saarna, Mart; Adoberg, Eron; Mikli, Valdek; Viljus, Mart; Kulu, PriitMaterials science = Medžiagotyra2012 / p. 40-44 : ill https://matsc.ktu.lt/index.php/MatSc/article/view/1339

Comparison of curvature and X-Ray methods for measuring of residual stresses in hard PVD coatingsLille, Harri; Kõo, Jakub; Gregor, Andre; Ryabchikov, Alexander; Sergejev, Fjodor; Traksmaa, Rainer; Kulu, PriitMaterials science forum2011 / p. 455-460

Comparison of damages in tungsten and tungsten doped with lanthanum-oxide exposed to dense deuterium plasma shotsShirokova, Veroonika; Laas, Tõnu; Mikli, ValdekJournal of nuclear materials2013 / p. 181-188 : ill https://www.sciencedirect.com/science/article/abs/pii/S0022311512006848 https://doi.org/10.1016/j.jnucmat.2012.12.027 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Composite powders for coatings on the base of recovered hard metalsKulu, Priit; Tümanok, Aleksei; Arensburger, Daniil; Pihl, ToomasReports and theses of International Conference of Welding Technologies, Equipment, Materials : MET-971997 / p. 135-143

Corrosion behavior of high velocity oxy-fuel sprayed composite Ni-/Fe-based self-fluxing alloy - cermet coatingsSarjas, Heikki; Surženkov, Andrei; Baroninš, Janis; Viljus, Mart; Traksmaa, Rainer; Kulu, PriitJournal of mineral, metal and material engineering2018 / p. 1-9 : ill http://www.scientificarray.org/journal-of-mineral-metal-and-material-engineering-volume-4/

Corrosion behavior of polypyrrole coated mild steelReut, Jekaterina; Idla, Katrin; Öpik, AndresInternational Conference on Science and Technology of Synthetic Metals : ICSM'98 : July 12-18, 1998, Montpellier, France : book of abstracts1998 / p. 157 https://www.sciencedirect.com/science/article/pii/S0379677998010364

Corrosion of the plastic-coated sheet metalKallavus, Urve; Põldme, Meeme23rd Estonian Chemistry Days : abstracts of scientific conference1997 / p. 48: ill

Corrosion perfomance of duple TiN coatings deposited by arc platingRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, ValdekInternational Conference on Advanced Materials : ICAM'97. European Materials Research Society Spring Meeting : E-MRS'97 : Strasbourg, France, June 16-20, 1997 : book of abstracts1997 / p. K-32 https://www.sciencedirect.com/science/article/abs/pii/S0257897297006233

Corrosion performance and structure of the titanium-based coatings deposited onto stainless steel substrate with arc platingRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Erikhov, F.; Straede, C.A.; Zwieg, T.Proceedings of the 40th Annual Technical Conference / Society of Vacuum Coaters1997 / p. 58-63 : ill

Corrosion performance of duplex TiN coatings deposited by arc platingRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Straede, C.A.Surface & coatings technology1998 / p. 247-250 : ill

Corrosion performance of titanium-based composite coatings deposited by physical vapour depositionRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Forsen, OlofProceedings of the Estonian Academy of Sciences. Engineering1996 / p. 14-25 : ill

Cu2Zn1-xCdSn(Se1-ySy)4 solid solutions as absorber materials for solar cellsAltosaar, Mare; Raudoja, Jaan; Timmo, Kristi; Danilson, Mati; Grossberg, Maarja; Krustok, Jüri; Mellikov, EnnPhysica status solidi (a) : applications and materials science2008 / 1, p. 167-170 : ill https://colab.ws/articles/10.1002%2Fpssa.200776839

Cyclic loading of TiCN coating by Vickers indentationSaarna, Mart; Lind, Liina; Peetsalu, Priidu; Sergejev, FjodorEngineering materials and tribology XXV2017 / p. 425-429 https://doi.org/10.4028/www.scientific.net/KEM.721.425 Conference proceedings at Scopus Article at Scopus

Densification and microstructure development in zirconia toughened hardmetalsVoltšihhin, Nikolai; Hussainova, Irina; Cura, M. Erkin; Hannula, Simo-Pekka; Traksmaa, RainerEngineering materials and tribology2013 / p. 50-55 : ill

Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfacesPodgurski, Vitali; Adoberg, Eron; Surženkov, Andrei; Kimmari, Eduard; Viljus, Mart; Mikli, Valdek; Hartelt, M.; Wäsche, R.; Šima, M.; Kulu, PriitWear2011 / p. 853-858 : ill https://www.sciencedirect.com/science/article/abs/pii/S0043164811001815

Description of punch wear mechanism during fine blanking processLind, Liina; Peetsalu, Priidu; Põdra, Priit; Adoberg, Eron; Veinthal, Renno; Kulu, PriitProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [II]2010 / p. 504-509 : ill

Determination of mechanical properties of thin hard coatings using nanoindentationYaldiz, Can Emrah; Veinthal, Renno; Gregor, Andre; Georgiadis, Kyriakos18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 48

Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrateLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorMaterials science = Medžiagotyra2012 / p. 51-56 : ill https://www.researchgate.net/publication/266348938_Determination_of_Modulus_of_Elasticity_Nanohardness_and_Residual_Stresses_in_Brush-plated_Gold_and_Silver_Coatings_on_Copper_Substrate

Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling methodRyabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, RennoMaterials science forum2011 / p. 171-176

Development of silicon oxynitride nanocomposites with single-walled carbon nanotubes as protective coatings for solar cells = Üheseinaliste süsiniknanotorudega ränioksünitriidist nanokomposiitmaterjalide arendamine päikesepatareide kaitsekateteksShmagina, Elizaveta2025 https://www.ester.ee/record=b5739646*est https://digikogu.taltech.ee/et/Item/5b38d0d4-d585-496f-b18e-de06aae6a6da https://doi.org/10.23658/taltech.20/2025

Diamond-like carbon coatings on NdFeB magnetsKruusing, Arvi; Podgurski, Vitali; Osvet, Andres; Herranen, MerjaProceedings of the Estonian Academy of Sciences. Engineering1998 / 1, p. 26-33: ill

Duplex TiN coating on stainless steel : an electrochemical and surface analysis study : doctoral thesisRudenja, Sergei1999 https://www.ester.ee/record=b1330948*est

Duplex TiN coatings deposited by arc plating for increased corrosion resistance of stainless steel substratesRudenja, Sergei; Leygraf, C.; Pan, J.; Kulu, Priit; Talimets, Ellen; Mikli, ValdekSurface & coatings technology1999 / p. 129-136 : ill http://dx.doi.org/10.1016/S0257-8972(99)00033-X

Duplex titanium nitride coatings for corrosion prevention of stainless steel substrateRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, ValdekProceedings [of] Joint Nordic Conference in Powder Technology, November 26-27, 1997, Helsinki1997 / p. 37

Duplex titanium nitride coatings resist corrosion betterRudenja, SergeiAdvanced coatings & surface technology1999 / 9, p. 4-5

Effect of electrode covering composition on the microstructure, wear, and economic feasibility of Fe-C-Cr manual arc-welded hardfacingsJankauskas, Vytenis; Katinas, Egidijus; Laskauskas, Arturas; Antonov, Maksim; Varnauskas, Valentinas; Gedzevičius, Irmantas; Aleknevičiene, VilijaCoatings2020 / art. 294, 19 p. : ill https://doi.org/10.3390/coatings10030294 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of HBN on wear of AlCrN-coated spark plasma - sintered TiB2/Ti composites at temperatures up to 900°CLuszcz, Maciej; Michalczewski, Remigiusz; Kalbarczyk, Marek; Osuch-Słomka, Edyta; Molenda, Jaroslaw; Liu, Le; Antonov, Maksim; Hussainova, IrinaQuarterly tribologia2022 / p. 43-55 https://doi.org/10.5604/01.3001.0015.8756

Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substratesSurženkov, Andrei; Viljus, Mart; Antonov, Maksim; Kübarsepp, Jakob; Juhani, Kristjan; Kulu, Priit; Vagiström, Heinar; Jankauskas, Vytenis; Leišys, Rimtautas; Bendikiene, Regita; Adoberg, Eron; Peetsalu, Priidu; Mere, Arvo; Gregor, AndreSurface and coatings technology2022 / art. 128771 https://doi.org/10.1016/j.surfcoat.2022.128771 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of loading system inertia on tribological behaviour of ceramic–ceramic, ceramic–metal and metal–metal dry sliding contactsAntonov, Maksim; Hussainova, Irina; Adoberg, EronTribology international2013 / p. 207-214 : ill https://doi.org/10.1016/j.triboint.2013.03.025 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of Local Remelting and Recycled WC-Co Composite Reinforcement Size on Abrasive and Erosive Wear of Manual Arc Welded HardfacingsKatinas, Egidijus; Antonov, Maksim; Jankauskas, Vytenis; Goljandin, DmitriCoatings2023 / art. 734 https://doi.org/10.3390/coatings13040734 Journal metrics at Scopus Article at Scopus Jourrnal metrics at WOS Article at WOS

Effect of SiO2 and PTFE additives on dry sliding of NiP electroless coatingGutsev, D.; Antonov, Maksim; Hussainova, Irina; Grigoriev, A.Y.Tribology international2013 / p. 295-302 : ill https://doi.org/10.1016/j.triboint.2012.12.012 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of tribosystem and inertia on run-in behavior of PVD coatingsAntonov, Maksim; Adoberg, Eron; Hussainova, Irina; Goljandin, Dmitri; Zikin, ArkadiECOTRIB 2011 : 3rd European Conference on Tribology and 4th Vienna International Conference on Nano-Technology : June 7-9, 2011, Vienna, Austria. 12011 / p. 159-164

Effect of WC grain size and content on erosive wear of manual arc welded hardfacings with low-carbon ferritic-pearlitic steel or stainless steel matrixKatinas, Egidijus; Antonov, Maksim; Jankauskas, Vytenis; Skirkus, RemigijusEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 213-218 : ill https://doi.org/10.4028/www.scientific.net/KEM.674.213 Conference Proceedings at Scopus Article at Scopus

18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 http://www.ester.ee/record=b2537121*est

Electrochemical behaviour of the duplex coatings in acidic electrolyteTalimets, Ellen; Kulu, Priit; Rudenja, Sergei; Pan, J.; Leygraf, C.; Mikli, Valdek2nd Baltic Conference on Electrochemistry : Palanga, Lithuania, 10-12 June : extended abstracts1999 / p. 159

Electrochemical evaluation of TiN coatingsRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Straede, C.A.; Zwieg, T.Proceedings of the Symposium on Interconnect and Contact Metallization1998 / p. 108-119 : ill

Electrochemical evaluation of TiN coatingsRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Straede, C.A.; Zwieg, T.Meeting abstracts / The Electrochemical Society and The International Society of Electrochemistry1997 / p. 1870

Electrochemical study of interfacial duplex TiN coatings in acidic and PBS solutionsRudenja, Sergei; Pan, J.; Leygraf, C.; Kulu, PriitAbstracts of European Materials Research Society Meeting : E-MRS-99 : 1999, Strasbourg1999 / p. B-I/P36

Electrosymtehsized molecularly imprinted polymer thin films for antibiotics detection in aqeous solutionsTretjakov, Aleksei; Sõritski, Vitali; Reut, Jekaterina; Zhang, Y.; Öpik, AndresGraduate Student Symposium on Molecular Imprinting 2013 : symposium programme and book of abstracts2013 / p. 35

Engineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 https://www.ester.ee/record=b1809345*est

Engineering materials and tribology2013

Engineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 http://dx.doi.org/10.4028/www.scientific.net/KEM.674

Erosion and impact wear resistance of thermal sprayed coatingsKulu, Priit; Tarbe, Riho; Veinthal, RennoSurface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria2007 / p. 94-99 : ill

Erosion and impact wear resistance of thermal sprayed coatings [Electronic resource]Kulu, Priit; Tarbe, Riho; Veinthal, RennoProceedings of 15th IFHTSE and 20 SMT Congress : September 2006, Vienna2006 / [CD-ROM]

Erosion wear of PM materials and coatings : prediction and controlVeinthal, Renno; Kulu, Priit; Käerdi, Helmo17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 52-53

Erosive wear resistance of HVOF sprayed coatingsKulu, Priit; Veinthal, Renno; Zimakov, SergeiEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 64-65

Evaluation method of coating thickness of coating thickness standardLaaneots, Rein; Riim, Jürgen14 International Congress of Metrologie : Paris, France, 22-25 juin 20092009 / ? p

Evaluation of mechanical properties and residual stresses of hard PVD coatingsGregor, Andre; Lille, Harri; Kõo, Jakub; Sergejev, Fjodor; Traksmaa, Rainer; Sivitski, Alina; Kulu, Priit18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 34

Evaluation of residual stresses in PVD coatings by means of tubular substrate length variationLille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Mikli, Valdek; Kübarsepp, Jakob; Peetsalu, PriiduResidual Stresses 2018 ECRS-10 : 10th European Conference on Residual Stresses(ECRS10) : Leuven, Belgium, 11-14th September, 20182018 / p. 131-136 : ill https://doi.org/10.21741/9781945291890-21

Evaluation of uncertainties of measurement for residual stresses in coatings determined by the dilatometric methodRjabtšikov, Aleksander; Lille, Harri; Laaneots, ReinMaterials science forum2006 / Residual stresses VII, p. 259-264

Evalution method of coating thickness of coating thickness standardLaaneots, Rein; Riim, Jürgen; Leibak, AlarProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [I]2010 / p. 245-250

Experimental spray powders and coatings produced from recycled hardmetal by various mechanical methodsTarbe, Riho; Zimakov, Sergei; Peetsalu, Priidu; Kulu, Priit; Mikli, ValdekEuro PM2006 : congress & exhibition : proceedings : PM in Belgium, a crossroads in industry development : 23-25 October 2006 : Ghent, Belgium. Vol. 1, Hard materials2006 / p. 259-264

15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 https://www.ester.ee/record=b2227259*est

Formation of microstructure of spray fused powder coatingsPihl, Toomas; Kulu, PriitProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 201-204 : ill

Formation of microstructure of spray-fused powder coatingsKulu, Priit; Pihl, Toomas; Tammjärv, Kristi; Vuoristo, PetriProceedings of the Estonian Academy of Sciences. Engineering2002 / 1, p. 38-51 : ill

Formation of microstructure of spray-fused powder coatingsKulu, Priit; Pihl, Toomas; Tammjärv, Kristi; Vuoristo, PetriMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 148-153 : ill

Fracture mechanism of powder materials and coatings by abrasive erosionKulu, Priit; Kallas, Paul; Kübarsepp, JakobInternational Conference Structure and Properties of the Brittle and Quaziplastic [i.e. Quasiplastic] Materials : June 14-16, 1994, Riga, Latvia : proceedings1994 / p. 51-55

Hard coatings manufacturing technology used in toolingGregor, Andre; Podgurski, Vitali; Adoberg, Eron; Kulu, PriitProceedings of the 5th International Conference of DAAAM Baltic : Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur : 20-22 April 2006, Tallinn, Estonia2006 / p. 255-260 : ill

High temperature tribological performance of adaptive hard nanocomposite coatings deposited on a WC-Co substrateAlamgir, Asad; Bogatov, Andrei; Yashin, Maxim; Viljus, Mart; Sondor, J.; Podgurski, VitaliGSFMT Scientific Conference 2020 : Tallinn, February 4-5, 2020 : abstracts2020 / p. 12 http://fmtdk.ut.ee/wp-content/uploads/2020/01/GSFMT2020.pdf

High temperature wear of cermet particle reinforced NiCrBSi hardfacingZikin, Arkadi; Antonov, Maksim; Hussainova, IrinaTribology international2013 / p. 45-55 : ill https://doi.org/10.1016/j.triboint.2012.08.013 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

HVOF sprayed Fe-Based wear-resistant coatings with carbide reinforcement, synthesized in situ and by mechanically activated synthesisTkachivskyi, Dmytro; Juhani, Kristjan; Surženkov, Andrei; Kulu, Priit; Antonov, Maksim; Goljandin, DmitriCoatings2020 / art. 1092, 15 p. : ill https://doi.org/10.3390/coatings10111092 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

HVOF thermal spray coatings of different powdersAbdel Aal, Alsayed; Zimakov, Sergei; Kulu, Priit; Kaytbay, S.H.M.15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 44-45

Identation method application for cracking resistance evaluation of hard coatings on tool steelsSivitski, Alina; Gregor, Andre; Saarna, Mart; Kulu, Priit; Sergejev, Fjodor18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 51

Impact and sliding wear properties of single layer, multilayer and nanocomposite physical vapour deposited (PVD) coatings on the plasma nitrided low-alloy 42CrMo4 steelSurženkov, Andrei; Adoberg, Eron; Põdra, Priit; Sergejev, Fjodor; Mere, Arvo; Viljus, Mart; Mikli, Valdek; Antonov, Maksim; Kulu, PriitEngineering materials and tribology2013 / p. 223-228 : ill

Impact erosive wear resistance of thermal sprayed WC-Co coatingsKulu, Priit; Zimakov, Sergei; Veinthal, RennoMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 187-192 : ill

Impact wear performance of thin hard coatings on TiC cermetsVeinthal, Renno; Sergejev, Fjodor; Yaldiz, Can Emrah; Mikli, Valdek18th IFHTSE Congress : 2010 July 26th to 30th, Rio de Janeiro, Brazil2010 / p. 5046-5056 : ill. [CD-ROM]

Improved corrosion resistance of duplex PVD coatingsRudenja, Sergei; Kulu, Priit; Talimets, Ellen; Mikli, Valdek; Straede, C.A.International DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference, 25-27th September 1997, Tallinn, Estonia1997 / p. 152-155: ill

In situ evaluation of porous coating qualityTehver, Jaan; Temkina, ValentinaProceedings of the Estonian Academy of Sciences. Engineering1996 / 1, p. 130-136: ill

Indentation hardness as a tool for powder coating characterizationVeinthal, RennoEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 40

Influence of Cr, Ti and Zr oxides formation on high temperature sliding of NiAl-based plasma spray coatingsPoliarus, Olena; Umanskyi, Oleksandr; Ukrainets, Maksym; Kostenko, Oleksii; Antonov, Maksim; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 308-312 : ill https://doi.org/10.4028/www.scientific.net/KEM.674.308 Conference Proceedings at Scopus Article at Scopus

Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti)N-G and nACo® coatingsSurženkov, Andrei; Adoberg, Eron; Antonov, Maksim; Sergejev, Fjodor; Mikli, Valdek; Viljus, Mart; Latokartano, Jyrki; Kulu, PriitEngineering materials & tribology XXII2014 / p. 28-31 https://doi.org/10.4028/www.scientific.net/KEM.604.28 Conference proceedings at Scopus Article at Scopus Conference proceedings at WOS Article at WOS

Influence of porous coating on the boiling burnout heat fluxTehver, JaanTallinna Tehnikaülikooli Toimetised1991 / lk. 80-90: ill

Influence of pretreatment of substrate surface on residual stresses in different cold spray coatingsRjabtšikov, Aleksander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, RennoMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 23

Influence of surface morphology on the tribological behavior of diamond-like carbon coatingPodgurski, Vitali; Bogatov, Andrei; Freund, Martin; Kulu, PriitEngineering materials and tribology2013 / p. 83-91 : ill

Influence of surface roughness on the tribological behaviour of the PVD coatingsSurženkov, Andrei; Adoberg, Eron; Viljus, Mart; Podgurski, Vitali; Veinthal, Renno; Kulu, Priit; Gregor, Andre18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 38

Influence of the technology to the properties of gas-flame coatingsPihl, Toomas; Kulu, PriitProceedings of the Third National DAAAM Conference in Estonia : SCIENCE '981998 / p. 118-121: ill

Influence of the treatment period on the morphology and the chemical composition of the thermally activated orthodontic archwiresPetrov, Valery; Terzieva, Stanimira; Tumbalev, V.; Mikli, Valdek; Andreeva, Laura; Stoyanova-Ivanova, AngelinaBulgarian chemical communications2015 / p. 234-238 : ill

Influence of UV-absorbers to color change of wood-coating systemsRohumaa, Anti; Süld, Tiia-Maaja; Kaps, TiitStambiamolekuliu junginiu chemija ir technologija = Polymer chemistry and technology : konferencijos pranešimu medžiaga1999 / p. 67-72: ill

Investigation into the residual stresses in gasflame sprayed coatingsKulu, Priit; Kõo, Jakub; Lille, Harri; Pihl, ToomasTallinna Tehnikaülikooli Toimetised1994 / lk. 17-31: ill

Investigation of morphology changes on nanocrystalline diamond film surfaces during reciprocating sliding against Si3N4 ballsBogatov, Andrei; Podgurski, Vitali; Raadik, Taavi; Kamjula, A. R.; Hantschel, Thomas; Tsigkourakos, M.; Kulu, PriitEngineering materials & tribology XXII2014 / p. 126-129 https://doi.org/10.4028/www.scientific.net/KEM.604.126 Conference proceedings at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Investigation of nanostructured and conventional alumina–titania coatings prepared by air plasma spray processIbrahim, Alsayed; Abdel Hamid, Z.; Abdel Aal, AlsayedMaterials science and engineering : A - structural materials: properties, microstructure and processing2010 / 3, p. 663-668 : ill https://www.sciencedirect.com/science/article/abs/pii/S0921509309009848

Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Reitsnik, Renno; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorEngineering materials and tribology2013 / p. 125-130 : ill

Investigation of residual stresses in flame sprayed Ni-based wear resistant coatings by the hole-drilling and X-ray methodsRyabchikov, Alexander; Lille, Harri; Reitsnik, Renno; Toropov, Stanislav; Surženkov, Andrei; Kulu, PriitInternational Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on Residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany2014 / p. 144-149 https://doi.org/10.4028/www.scientific.net/MSF.768-769.144 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Investigation of some properties of brush-plated gold and silver galvanic coatingsLille, Harri; Kõo, Jakub; Ryabchikov, Alexander; Reitsnik, Renno; Mikli, Valdek; Sergejev, FjodorProceedings of the 2nd International Conference Optimization and Analysis of Structures : Tartu, Estonia, August 25-27, 20132013 / p. 101-107 : ill

Investigation of the surface fatigue of carbide composites and PVD hard coatingsSergejev, Fjodor; Antonov, Maksim; Gregor, Andre; Hussainova, Irina; Kulu, Priit; Kübarsepp, JakobProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 543-548 : ill http://innomet.ttu.ee/daaam08/online/Materials%20Engineering/Sergejev.pdf

Investigation of (Ti, Al)N based coatings grown by physical vapor depositionPodgurski, Vitali; Torp, Bo; Traksmaa, Rainer; Veinthal, Renno; Viljus, Mart; Coddet, Olivier; Morstein, Marcus; Gregor, Andre; Kulu, PriitMaterials science = Medžiagotyra2005 / 4, p. 352-355 : ill https://www.researchgate.net/publication/237812860_Investigation_of_Ti_AlN_Based_Coatings_Grown_by_Physical_Vapor_Deposition

Ionic liquids as background electrolyte additives and coating materials in capillary electrophoresisVaher, Merike; Borissova, Maria; Koel, Mihkel; Kaljurand, MihkelProceedings of the Estonian Academy of Sciences. Chemistry2007 / 4, p. 187-198 : ill

Jätkuks probleemidele katendite dimensioneerim[i]selAavik, AndrusTeeleht2003 / 3, lk. 3-8 : ill

Maavara kasutamine kattematerjalidena prügilate sulgemiselMets, Mait; Torn, HardiEhitusmaterjalide kaevandamine ja varud : Eesti Mäekonverents 20052005 / lk. 87-89

Masinaehitusmaterjalid1991 https://www.ester.ee/record=b1253831*est

Measurement and relaxation observation of residual stresses in brush-plated gold coating depending on the current densityLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, Valdek18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 50

Measurement of residual stresses in brush-plated nickel coatingLille, Harri; Kõo, Jakub; Pihl, ToomasProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 185-188 : ill

Mechanically activated synthesis of nanocrystalline chromium carbide powdersPirso, Jüri; Viljus, Mart; Letunovitš, SergeiNanopowders, Nanostuctured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts2005 / p. 34-36 : ill

Mechanisms of fracture of PM materials and coatings by impact loadingKallas, Paul; Kulu, Priit; Pirso, Jüri; Tümanok, AlekseiDeformation and fracture in structural PM materials : proceedings of the International Conference held in the Hotel Academia, the High Tatras, Slovakia, October 13-16, 1996. Vol. 21996 / p. 199-209 : ill

Mehanical properties of PVD coatings on TiC-based cermetsVeinthal, Renno; Yaldiz, Can Emrah; Gregor, Andre1st Mediterranean Conference on Heat Treatment and Surface Engineering : Heat Treatment and Surface Engineering in the Manufacturing of Metallic Engineering Components : December 1-3, 2009, Sharm El-Skeikh, Egypt2009 / p. 54

Metallic coatings through additive manufacturing: a reviewMohanty, Shalini; Prashanth, Konda GokuldossMaterials2023 / art. 2325 : ill https://doi.org/10.3390/ma16062325 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Methods and instruments for calibration of coating thickness gaugesLaaneots, ReinXIV IMEKO World Congress : New Measurements - Challenges and Visions, 1-6 June 1997, Tampere, Finland. Vol. 8, Topic 141997 / p. 284-291: ill

Micromechanical properties and wear resistance of powder coatingsVeinthal, Renno; Zimakov, Sergei; Kulu, PriitProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 216-219 : ill

Microstructural aspects of abrasive wear of composite powder materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoInternational journal of materials & product technology2011 / p. 92-119 : ill

Microstructural aspects of thermal sprayed WC-Co coatings and Ni-Cr coated steels = WC-Co termopinnete ja Ni-Cr pinnatud teraste metallograafilised aspektidPeetsalu, Priidu2007 https://www.ester.ee/record=b2315917*est

Microstructure of the hard coatings deposited by arc ion platingRudenja, SergeiJunior EUROMAT '96 : European Conference : August 26-30, Lausanne, Switzerland : [abstracts]1996

Mikroobivastaste pindade katsetused jäävad ohtlikult eluvõõraks [Võrguväljaanne]Harrik, Airikanovaator.err.ee2022 "Mikroobivastaste pindade katsetused jäävad ohtlikult eluvõõraks"

Modeling of erosion wear of powder composite materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoSurface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria2007 / p. 129-132 : ill

Modelling of abrasive wear and prognostication of erosion resistance of powder materials and coatingsKulu, Priit; Veinthal, Renno; Käerdi, HelmoInternational Conference HighMatTech : October 15-19, 2007, Kiev, Ukraine : proceedings of conference2007 / p. 472

Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewedpapers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799

Modification of light absorption in thin CuInS2 films by sprayed gold nanoparticlesMere, Arvo; Katerski, Atanas; Oja Acik, Ilona; Dolgov, Leonid; Sildos, Ilmo; Krunks, MalleNANOSMAT Conference, 22-25 September 2013, Granada, Spain : abstracts book2013

Molecularly imprinted poly(m-phenylenediamine) films as a sensing layer for antibiotic detectionTretjakov, Aleksei; Sõritski, Vitali; Reut, Jekaterina; Zhang, Y.; Öpik, Andres; Hinrichs, Karsten; Rappich, JörgBaltic Polymer Symposium 2013 : Trakai, Lithuania, September 18-21, 2013 : programme [and abstracts]2013 / p. 41

Morphological changes on diamond and DLC films during sliding wear = Morfoloogilised muutused teemant- ja teemandilaadsetel pinnetel liugkulumiselBogatov, Andrei2015 http://www.ester.ee/record=b4447899*est

Multifunctional, multilayered and nanostructured hard coatingsPodgurski, VitaliNanopowders, Nanostuctured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts2005 / p. 25-26

Mõõtmine : mõõdundus. Pindepaksusmõõturite kalibreerimine : aastatel 1991-1997 avaldatud teadustööde koopiate kogumik. 5Laaneots, Rein1997 https://www.ester.ee/record=b2641553*est

Nanopowders and nanostructured coatingsKulu, Priit; Zimakov, Sergei; Podgurski, Vitali; Peetsalu, Priidu; Tarbe, RihoNanopowders, Nanostuctured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts2005 / p. 8

Nanopowders, Nanostuctured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts2005 http://www.ester.ee/record=b2038086*est

New composite coatings on the base of recycled hardmetalsZimakov, Sergei; Tarbe, Riho; Kulu, PriitThermal Spray 2003 : proceedings of the International Thermal Spray Conference : [Orlando, Florida, 5-8 May 2003]2003 / p. 455-459 https://www.researchgate.net/publication/363288015_New_Composite_Coatings_on_the_Base_of_Recycled_Hardmetals

Normale zur Eichung von SchichtdickenmeßgerätenLaaneots, ReinVII. Internationales Oberflächenkolloquium : vom 8. bis 10. Februar 1988 in Karl-Marx-Stadt. Bd. 2: Beschreibung der Poster1988 / S. 141-144

Novel Cu2CdSnS4 and Cu2ZnGeSe4 absorber materials for monograin layer solar cell applicationTimmo, Kristi; Kauk-Kuusik, Marit; Altosaar, Mare; Raudoja, Jaan; Raadik, Taavi; Grossberg, Maarja; Varema, Tiit; Pilvet, Maris; Leinemann, Inga; Volobujeva, Olga; Mellikov, EnnEU PVSEC proceedings2013 / p. 2385-2388 : ill

Novel thermally sprayed corrosion and wear resistant coatingsKulu, Priit; Zimakov, Sergei; Goljandin, Dmitri; Peetsalu, PriiduProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 169-172 : ill

On residual stresses in flame sprayed coatingsPihl, Toomas; Lille, Harri; Kõo, Jakub; Kulu, PriitCivil Engineering'99 : proceedings of the conference in Latvia, Jelgava, 19991999 / p. 11-16

On residual stresses in flame sprayed coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasProceedings of the 8th International Baltic Conference : Materials Engineering-99 : September 23-24, Kaunas, Lithuania1999 / p. 156

On residual stresses in flame sprayed coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasMedžiagotyra = Materials science1999 / 2, p. 27-29: ill

On the residual stresses in melted Ni-based powder coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasProceedings of the Third National DAAAM Conference in Estonia : SCIENCE '981998 / p. 110-113: ill

Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditionsSurženkov, Andrei; Tarbe, Riho; Tarraste, Marek; Simson, Taavi; Viljus, Mart; Kulu, PriitEuropean Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications : 11-13 May 2016, Prague, Czech Republic, Břevnov Monastery2016 / [10] p. : ill

Passivation and anodic oxidation of duplex TiN coatings on stainless steelRudenja, Sergei; Pan, J.; Odnevall Wallinder, Inger; Leygraf, C.; Kulu, PriitJournal of The Electrochemical Society1999 / p. 4082-4086 https://www.researchgate.net/publication/234857934_Passivation_and_Anodic_Oxidation_of_Duplex_TiN_Coating_on_Stainless_Steel

Passivity of TiN layer: role in corrosion prevention of coated steel substrateRudenja, Sergei; Kulu, PriitProceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia2000 / p. 225-228 : ill

Performance of tool steels strengthened by PVD coatings in adhesion and cyclic loading wear conditionsTšinjan, Aleksei; Klaasen, Heinrich; Kübarsepp, Jakob; Adoberg, Eron; Talkop, Adolf; Viljus, MartProceedings of EURO PM 2011 Congress & Exhibition : October 9-12, 2011, Barcelona, Spain2011 / [6] p.: ill https://www.researchgate.net/publication/286309089_Performance_of_tool_steels_strengthened_by_PVD_coatings_in_adhesion_and_cyclic_loading_wear_conditions

Pindepaksusmõõturite kalibreerimise meetodid ja mõõtevahendid : ajavahemikus 1970-1980 avaldatud teadustööde koopiate kogumik. 1Laaneots, Rein1980 https://www.ester.ee/record=b2641412*est

Pinnete paksuse mõõtmineLaaneots, Rein; Roosimölder, LembitTehnika ja Tootmine1991 / 7/8, lk. 19-21: fotod

Pinnete paksuse mõõtmine : meetodid, mõõtevahendid ja jälgitavus : aastatel 1986-1990 avaldatud teadustööde koopiate kogumik. 3Laaneots, Rein1990 https://www.ester.ee/record=b2641436*est

Pinnete paksuse mõõtmine : meetodid, mõõtevahendid ja jälgitavus : aastatel 1991-1994 avaldatud teadustööde koopiate kogumik. 4Laaneots, Rein1995 https://www.ester.ee/record=b2641468*est

Plastikkattega tsinkpleki korrosioonKallavus, Urve; Põldme, MeemeXXIII Eesti keemiapäevad : teaduskonverentsi ettekannete referaadid1997 / lk. 43: ill

p–n junction improvements of Cu2ZnSnS4/CdS monograin layer solar cellsKauk-Kuusik, Marit; Timmo, Kristi; Danilson, Mati; Altosaar, Mare; Grossberg, Maarja; Ernits, KaiaApplied surface science2015 / p. 795-798 : ill https://doi.org/10.1016/j.apsusc.2015.09.094 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

POLYALPAN - üks võimalik fassaadikattematerjalÕiger, KarlEhituskaar1997 / 10, lk. 14-16: ill

Polyalpan - üks võimalik fassaadikattematerjalÕiger, KarlEhitaja1998 / lk. 20-21: ill https://www.ester.ee/record=b1072123*est

Poly(m-phenylenediamine) thin films molecularly imprinted with antibiotics as a recognition material for biosensor applicationSõritski, Vitali; Reut, Jekaterina; Tretjakov, Aleksei; Öpik, Andres; Hinrichs, Karsten; Rappich, JörgPolymers for advanced technologies2013 / p. 153

Post-growth annealing effect on the performance of Cu2ZnSnSe4 monograin layer solar cellsKauk-Kuusik, Marit; Altosaar, Mare; Muska, Katri; Pilvet, Maris; Raudoja, Jaan; Timmo, Kristi; Varema, Tiit; Grossberg, Maarja; Mellikov, Enn; Volobujeva, OlgaThin solid films2013 / p. 18-21 : ill https://doi.org/10.1016/j.tsf.2012.11.075 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Pre- and posttreatment effect to the surface properties of thin hard coatingsAdoberg, Eron; Surženkov, Andrei; Podgurski, Vitali; Peetsalu, Priidu; Kulu, PriitMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 44

Prognosis of abrasive-erosive wear resistance of powder coatings [Electronic resource]Kulu, Priit23rd Meeting IRG-OECD, Coimbra, 20022002 / p. 14 [CD-ROM]

Properties and performance of hard coatings on tool steels under cyclic indentationSivitski, Alina; Gregor, Andre; Saarna, Mart; Kulu, Priit; Sergejev, FjodorActa mechanica Slovaca2009 / p. 84-94 : ill

Properties of ZnO-nanorod/In₂S₃/CuInS₂ solar cell and the constituent layers deposited by chemical spray method = Keemilise pihustuse meetodil sadestatud ZnO-nanovarras/In₂S₃/CuInS₂ päikesepatarei ja selle koostisosade omadusedKärber, Erki2014 https://www.ester.ee/record=b3073760*est

PulberkattedKulu, PriitTehnika ja Tootmine1983 / lk. 20-21 https://www.ester.ee/record=b1073047*est

PulberpinnakattedKulu, PriitTehnika ja Tootmine1983 / lk. 20-21 : ill., tab https://www.ester.ee/record=b1073047*est

PVD coatings for corrosion preventionRudenja, Sergei; Talimets, Ellen; Kulu, Priit; Mikli, ValdekCorrosion: Permanent Danger for Society and Environment : Surface 97 : 2nd Central, Eastern and Northern Europe Regional Conference : proceedings1997 / p. 98-101 : ill

PVD grown SnS thin films onto different substrate surfacesRevathi, Naidu; Bereznev, Sergei; Iljina, Julia; Safonova, Maria; Mellikov, Enn; Volobujeva, OlgaJournal of materials science : materials in electronics2013 / p. 4739-4744 : ill https://doi.org/10.1007/s10854-013-1468-8 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Raman spectroscopy for reliability assessment of multilayered AlCrN coating in tribo-corrosive conditions [Online resource]Baroninš, Janis; Antonov, Maksim; Bereznev, Sergei; Raadik, Taavi; Hussainova, IrinaCoatings2018 / art. 229, 12 p. : ill https://doi.org/10.3390/coatings8070229 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Rannila ei ole pelgalt katusekattefirmaLoorits, KaljuEhitaja2000 / 4, lk. 26-27 https://artiklid.elnet.ee/record=b1003637*est

Rannila производит не только кровельные покрытияLoorits, KaljuСтроитель2000 / 2, с. 18-19 https://artiklid.elnet.ee/record=b1004211*est

Recovery of hardmetals and the coatings on the base of recovered hardmetalsKulu, Priit; Tümanok, Aleksei; Pihl, ToomasMaterials Engineering-96 : materials of VI-th International Baltic Conference, Kaunas, 22-23 October 19961996 / p. 44-50: ill

Recycled hard metal-base wear-resistant composite coatingsKulu, Priit; Halling, JaanusJournal of thermal spray technology1998 / 2, p. 173-178: ill

Recycled hardmetal-based powder composite coatings : optimisation of composition, structure and propertiesKulu, Priit; Käerdi, Helmo; Surženkov, Andrei; Tarbe, Riho; Veinthal, Renno; Goljandin, Dmitri; Zikin, ArkadiInternational journal of materials & product technology2014 / p. 180-202 : ill https://doi.org/10.1504/IJMPT.2014.064038 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Relation between self-organization and wear mechanisms of diamond filmsPodgurski, Vitali; Bogatov, Andrei; Yashin, MaximEntropy2018 / art. 279, 16 p. : ill https://doi.org/10.3390/e20040279 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Relaxation of residual stresses in brush-plated gold and silver coatings on copper and on brass substratesLille, Harri; Kõo, Jakub; Ryabchikov, Alexander; Reitsnik, Renno; Sergejev, Fjodor; Dong, MinjieResidual stresses IX2014 / p. 866-871 : ill https://doi.org/10.4028/www.scientific.net/AMR.996.866 Article at Scopus Article at WOS

Relaxation of residual stresses in brush-plated gold coatingLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Laaneots, ReinProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 491-496 : ill http://innomet.ttu.ee/daaam08/Online/Materials%20Engineering/lille-koo-ryabchikov-laaneots.pdf

Residual stresses analysis in brush-plated galvanic coatings deposited from nickel sulfate electrolyteLille, Harri; Kõo, Jakub; Rjabtšikov, AleksanderProceedings of the 57th Annual Conference on Applications of X-ray Analysis [Denver X-ray Conference] and the 8th International Conference on Residual Stresses : 4-8 August 2008, Denver, Colorado, USA2009 / p. 706-713 : ill

Residual stresses and their relaxation in brush-plated gold and silver coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Veinthal, Renno; Mikli, ValdekMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 39

Residual stresses in brush-plated gold coatingLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Laaneots, ReinProceedings of the 57th Annual Conference on Applications of X-ray Analysis [Denver X-ray Conference] and the 8th International Conference on Residual Stresses : 4-8 August 2008, Denver, Colorado, USA2009 / p. 320-327 : ill

Residual stresses in brush-plated gold coatingsLille, Harri; Kõo, Jakub; Pihl, Toomas15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 38-39 : ill

Residual stresses in different brush-plated coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Laaneots, Rein; Pihl, ToomasProceedings of the 5th International Conference of DAAAM Baltic : Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur : 20-22 April 2006, Tallinn, Estonia2006 / p. 273-278 : ill

Residual stresses in some thermal sprayed coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 164-168 : ill

Residual stresses on various PVD hard coatings on tube and plate substratesLille, Harri; Ryabchikov, Alexander; Peetsalu, Priidu; Lind, Liina; Sergejev, Fjodor; Mikli, Valdek; Kübarsepp, JakobCoatings2020 / art. 1054, 11 p https://doi.org/10.3390/coatings10111054 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Residual stresses, modulus of elasticity and coefficient of thermal expansion of some powder coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasInternational DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference, 25-27th September 1997, Tallinn, Estonia1997 / p. 165-168: ill

Role of alloying elements for improved corrosion resistance of Zn-Al-Mg coatings on steelVolovitch, P.; Abdel Aal, Alsayed; Lefevre, G.The European Corrosion Congress : EuroCorr2010 : Moscow, Russia 20102010

Rough surface model using the potential function superpositionsTelliskivi, Tanel; Põdra, PriitProceedings of the Estonian Academy of Sciences. Engineering2006 / 1, p. 16-25 : ill

Schicht und ihre DickeLaaneots, ReinIX. Internationales Oberflächenkolloquium : 29. bis 31. Januar 1996. Bd. 1, Poster1995 / S. 147-155: Ill

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoMedžiagotyra = Materials science2002 / 4, p. 425-429 : ill

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoAbstracts of International Conference Materials Engineering and Tribology2002 / p. 38

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoAbstracts of 10th Nordic Symposium on Tribology NORDTRIB2002 / p. 163

Selection criteria for abrasive erosion wear resistant powder coatings [Electronic resource]Kulu, Priit; Veinthal, RennoProceedings of 10th Nordic Symposium on Tribology NORDTRIB2002 / [CD-ROM]

Selection criteria for wear resistant powder coatings under extreme erosive wear conditionsKulu, Priit; Pihl, ToomasJournal of thermal spray technology2002 / p. 517-522 : ill

Selection of coating systems and processes for different wear conditionsKulu, Priit; Saarna, Mart; Sergejev, Fjodor; Gregor, Andre; Surženkov, AndreiProceedings of 14th Nordic Symposium on Tribology : NORDTRIB 2010 : 08.06-11.06.2010, Storforsen, Sweden2010 / [8] p. [CD-ROM]

Selection of hardmetal containing hardfacings for different abrasive conditionsKulu, Priit; Surženkov, Andrei; Simson, Taavi; Sarjas, HeikkiEuropean Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications : 11-13 May 2016, Prague, Czech Republic, Břevnov Monastery2016 / [10] p. : ill

Selection of powder coatings for extreme conditions of abrasive wearKulu, PriitEUROMAT 2001 : 7th European Conference on Advanced Materials and Processes : Rimini, Italy, 10-14 June, 2001 : conference abstracts2001 / p. 117

Selection of powder coatings for extreme conditions of abrasive wear [Electronic resource]Kulu, PriitProceedings of 7th European Conference on Advanced Materials and Processes : EUROMAT 2001 : Italy2001 / [CD-ROM]

Selection of powder coatings for extreme erosion wear conditionsKulu, PriitAdvanced engineering materials2002 / 6, p. 392-397 : ill

Selective antibiofilm properties and biocompatibility of nano-ZnO and nano-ZnO/Ag coated surfacesRosenberg, Merilin; Visnapuu, Meeri; Vija, HeikiScientific reports2020 / art. 13478, 15 p. : ill https://doi.org/10.1038/s41598-020-70169-w Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Selenisation of sequentially electrodeposited Cu-Zn and Sn precursor layersIljina, Julia; Volobujeva, Olga; Raadik, Taavi; Revathi, Naidu; Raudoja, Jaan; Loorits, Mihkel; Traksmaa, Rainer; Mellikov, EnnThin solid films2013 / p. 14-17 : ill

Simulating sliding wear with finite element methodPõdra, Priit; Andersson, SörenTribology international1999 / p. 71-81 : ill

Single-layer and multilayer hard coatings deposited by PVD for corrosion protection of the self-passivate steel substrateRudenja, Sergei; Kulu, Priit; Talimets, EllenMeeting abstracts of the Electrochemical Society. Vol. 96-1, Spring Meeting, Los Angeles, California, May 5-10, 19961996 / p. 94

Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatingsSurženkov, Andrei; Antonov, Maksim; Mikli, Valdek; Latokartano, Jyrki; Vilgo, Timo; Kulu, PriitBALTTRIB'2013 : VII International Scientific Conference : 14-15 November 2013, Kaunas, Lithuania : proceedings2013 / p. 62-66 https://www.researchgate.net/publication/258862543_SLIDING_WEAR_OF_HVOF_SPRAYED_SELF-FLUXING_ALLOY_MATRIX_CERMET_PARTICLES_REINFORCED_COMPOSITE_COATINGS

Sliding wear of PVD hard coatings: fatigue and measurement aspects = Õhukeste kõvapinnete liugekulumine: väsimuse ja mõõtmise aspektidSivitski, Alina2010 https://www.ester.ee/record=b2635254*est

Sliding wear of TiC-NiMo and Cr3C2-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatingsSurženkov, Andrei; Antonov, Maksim; Goljandin, Dmitri; Vilgo, Timo; Mikli, Valdek; Viljus, Mart; Latokartano, Jyrki; Kulu, PriitEstonian journal of engineering2013 / p. 203-211 : ill https://doi.org/10.3176/eng.2013.3.03 Article at Scopus

Sliding wear performance of AlCrN coating on TiB2/Ti composites at high temperaturesMichalczewski, Remigiusz; Kalbarczyk, Marek; Słomka, Zbigniew; Osuch-Słomka, Edyta; Łuszcz, Maciej; Liu, Le; Antonov, Maksim; Hussainova, IrinaMaterials2021 / art. 6771 https://doi.org/10.3390/ma14226771 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Solid particle erosion : occurrence, prediction and controlKleis, Ilmar; Kulu, Priit2008 http://www.ester.ee/record=b2368841*est

Solid particle erosion : occurrence, prognostification and controlKleis, Ilmar; Kulu, Priit2005 https://www.ester.ee/record=b2080005*est

Solid particle erosion of thermal sprayed coatingKulu, PriitAbstracts of International Conference on Erosive and Abrasive Wear II : Cambridge, UK, 20032003 / p. 1.3 https://www.sciencedirect.com/science/article/abs/pii/S0043164804001644

Spinel alumina nanofibers synthesis via ALD coating of alumina nanofibersRauwel, Erwan; Nilsen, Ola; Rauwel, Protima; Galeckas, Augustinas; Wragg, David; Walmsley, John; Hussainova, Irina; Soots, KarelWG2 workshop and 4th ALDCoE annual seminar : 23-24 May 2016, Helsinki, Finland : abstracts2016 / [1] p. : ill

Sprayed coatings on the base of recycled hardmetalsZimakov, Sergei; Arensburger, Daniil; Tarbe, RihoInternational Conference Novel Technologies in Power Metallurgy and Ceramics : Kiev, Ukraine, 20032003 / p. 333

Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layersLehner, Julia; Loorits, Mihkel; Revathi, Naidu; Raadik, Taavi; Raudoja, Jaan; Grossberg, Maarja; Mellikov, Enn; Volobujeva, Olga; Ganchev, MaximJournal of crystal growth2013 / p. 236-240 : ill https://doi.org/10.1016/j.jcrysgro.2013.06.012 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Structure and corrosion behaviour of hard coatings deposited by arc ion platingRudenja, SergeiProceedings of the First National DAAAM Conference in Estonia : Science '951996 / p. 88-98: ill

Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix based coatingsKulu, Priit; Zikin, Arkadi; Surženkov, Andrei; Tarbe, Riho2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering : Dubrovnik-Cavtat, Crovatia, 11-14 June 20132013 / p. 37-44 https://www.inderscienceonline.com/doi/abs/10.1504/IJMMP.2014.061054

Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix-based coatingsKulu, Priit; Zikin, Arkadi; Surženkov, Andrei; Tarbe, RihoInternational journal of microstructure and materials properties2014 / p. 4-14 https://doi.org/10.1504/IJMMP.2014.061054 Journal metrics at Scopus Article at Scopus

Study of residual stresses in some gas-flame sprayed coatingsKulu, Priit; Kõo, Jakub; Lille, Harri; Pihl, ToomasPowder Technology 95 : Vth Baltic Conference, November 7-8, 1995, Tallinn1995 / l. 42 https://www.ester.ee/record=b1492085*est

Study of technology and properties of PVD TiN coatingsRudenja, Sergei; Kulu, Priit; Mikli, ValdekPowder Technology 95 : Vth Baltic Conference, November 7-8, 1995, Tallinn1995 / l. 43 https://www.ester.ee/record=b1492085*est

Surface carboxylation or PEGylation decreases CuO nanoparticles’ cytotoxicity to human cells in vitro without compromising their antibacterial propertiesKubo, Anna-Liisa; Vasiliev, Grigory; Vija, Heiki; Krištal, Jekaterina; Tõugu, Vello; Visnapuu, Meeri; Kisand, Vambola; Kahru, Anne; Bondarenko, OlesjaArchives of toxicology2020 / p. 1561-1573 : ill https://doi.org/10.1007/s00204-020-02720-7

Surface fatigue and wear resistance of thin and thick hard coatingsKulu, Priit; Saarna, Mart; Sergejev, Fjodor; Gregor, Andre; Sivitski, Alina; Müller, H.IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress : July 26-30, 2010, Rio de Janeiro, Brazil : [CD-ROM]2010 https://www.researchgate.net/publication/289598093_Surface_fatigue_and_wear_resistance_of_thin_and_thick_hard_coatings

Surface plasmon resonance caused by gold nanoparticles formed on sprayed TiO2 filmsOja Acik, Ilona; Dolgov, Leonid; Krunks, Malle; Mere, Arvo; Mikli, Valdek; Pikker, Siim; Loot, Ardi; Sildos, IlmoThin solid films2014 / p. 144-147 : ill https://doi.org/10.1016/j.tsf.2013.11.125 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

ZnO nanostructures by chemical spray for next generation solar cellsKrunks, Malle; Dedova, Tatjana; Oja Acik, Ilona; Kriisa, Merike; Mikli, Valdek; Katerski, Atanas; Kärber, Erki; Mere, ArvoNEXTGEN NANO PV : book of abstracts2013 / p. 31-32

Tallinna teadlased leiutasid õhku puhastavad pinnakatted [Võrguväljaanne]Pau, Aivarforte.delfi.ee2021 "Tallinna teadlased leiutasid õhku puhastavad pinnakatted "

Tallinna Tehnikaülikooli teadlased loovad õhku ja pindu puhastavaid pinnakatteidElektriala2021 / lk. 13 https://www.ester.ee/record=b1240496*est

TalTechi teadlased loovad õhku ja pindasid puhastavaid pinnakatteidMente et Manu2021 / lk. 28-29 : ill Mente et Manu 2/2021

Tark teekatend kuulutati aasta arendustööksÄripäev2020 / lk. 22 : fot https://www.ester.ee/record=b2122331*est

Termopihustatud barjäärpindedPihl, ToomasTallinna Tehnikakõrgkooli Toimetised2005 / lk. 54-59 : ill

Testing a method for evaluating the performance of coatings on end mills in semi-industrial conditionsLeemet, Tõnu; Allas, Jaanus; Madissoo, Marten; Adoberg, Eron; Saar, RandoAgronomy research2014 / p. 263-268 : ill https://www.cabidigitallibrary.org/doi/pdf/10.5555/20143184842 Journal metrics at Scopus Article at Scopus

The calibration method of coating thickness gaugesAbiline, Indrek; Laaneots, Rein; Nanits, Mats-MaiduOST-03 Symposium on Machine Design2003 / p. 169-176 : ill

The coating thickness and its definitionAbiline, Indrek; Laaneots, Rein; Leibak, Alar; Riim, JürgenProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [1]2008 / p. 13-18 : ill http://innomet.ttu.ee/daaam08/online/Design%20Engineering/Abiline.pdf

The effect of grey water irrigation on greenroof performanceSpolek, G.; Voll, Hendrik; Ouldboukhitine, S.-E.10th Annual green roof and wall conference : Chicago, USA, October 17-20, 20122012 / p. 34-42

The effect of surface pre-treatment and coating post-treatment to the properties of TiN coatingsAdoberg, Eron; Podgurski, Vitali; Peetsalu, Priidu; Lind, Liina; Mikli, Valdek; Hvizdoš, Pavol; Kulu, PriitEstonian journal of engineering2012 / p. 185-192 : ill https://kirj.ee/public/Engineering/2012/issue_3/Eng-2012-3-185-192.pdf

The processes and enthalpies in synthesis of Cu2ZnSnS4 in molten CdI2Nkwusi, Godswill; Leinemann, Inga; Altosaar, MareInternational advanced research journal in science, engineering and technology2016 / p. 113-119 : ill http://dx.doi.org/10.17148/IARJSET.2016.3524

The rolling contact fatigue of PVD coated spur gearsMichalczewski, Remigiusz; Piekoszewski, Witold; Szczerek, Marian; Tuszynski, Waldemar; Antonov, MaksimEngineering materials and tribology2013 / p. 77-82 https://www.researchgate.net/publication/258178620_The_Rolling_Contact_Fatigue_of_PVD_Coated_Spur_Gears

The wear mechanism in heavy-loaded lubricated coated/steel sliding contactsVlad, Mihaela; Szczerek, Marian; Michalczewski, Remigiusz; Antonov, MaksimTribologia2010 / 6, p. 153-168 : ill https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://bibliotekanauki.pl/articles/190040.pdf&ved=2ahUKEwi29Zn44oeIAxXhMhAIHUbTCiYQFnoECBIQAQ&usg=AOvVaw2FT2xYT98MhnLtulMDb_IU

The wear of PVD coated elements in oscillation motion at high temperatureMichalczewski, Remigiusz; Kalbarczyk, Marek; Slomka, Zbigniew; Liu, Le; Antonov, Maksim; Hussainova, IrinaProceedings of the Estonian Academy of Sciences2021 / p. 500-507 : ill https://doi.org/10.3176/proc.2021.4.18 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

TiAlN coatings tribology for textile machinery partsHussain, Abrar; Podgurski, Vitali; Goljandin, Dmitri; Antonov, MaksimProceedings of the Estonian Academy of Sciences2021 / p. 163-171 : ill https://doi.org/10.3176/proc.2021.2.04 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

TiCN coating tribology for the circular economy of textile industriesHussain, Abrar; Podgurski, Vitali; Antonov, Maksim; Viljus, Mart; Goljandin, DmitriJournal of industrial textiles2022 / p. 8947S-8959S https://doi.org/10.1177%2F15280837211025726 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

TiO2 thin films by ultrasonic spray pyrolysis for photocatalytic air-cleaning applications = TiO2 õhukesed kiled ultraheli pihustuspürolüüsi meetodil õhu fotokatalüütiliseks puhastamiseksDündar, Ibrahim2021 https://www.ester.ee/record=b5408882*est https://digikogu.taltech.ee/et/Item/266d75a3-ff2e-4bcf-aa54-2151511e871f https://doi.org/10.23658/taltech.13/2021

Titaandioksiidi kinnitamine keramsiidi pinnale : katete fotokatalüütilise aktiivsuse määramine doksütsükliini lagundamisel ning kinnitusmeetodi optimeeriminePronina, Natalja; Moiseev, Anna; Kritševskaja, Marina; Klauson, DenissXXXIII Eesti Keemiapäevad : teaduskonverentsi teesid2013 / lk. 61

Titan-based arc evaporated coatings with minimized content of microdroplets phaseRudenja, Sergei; Kulu, PriitSurface 95 : 1st Central, Eastern and Northern Europe Regional Conference on Surface Treatment : Technologies, Environmental and Standardization, September 4-8, 1995, Palanga, Lithuania1995 / p. 36

Tools for machining wear-resistant coatingsKlimenko, Sergey A.; Mukovoz, Yury A.International DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference 25-27th September 1997, Tallinn, Estonia1997 / p. 105-108: ill

Topografical calibration method of coating thickness standardsRiim, JürgenProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [I]2010 / p. 238-244 : ill

Transition from self-organized criticality into self-organization during sliding Si3N4 balls against nanocrystalline diamond filmsBogatov, Andrei; Podgurski, Vitali; Vagiström, Heinar; Yashin, Maxim; Shaikh, Asad Alamgir; Viljus, Mart; Menezes, Pradeep; Gershman, IosifEntropy2019 / art. 1055 ; 12 p https://doi.org/10.3390/e21111055 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Tribological and structural aspects of tribo-design of abrasive wear resistant coatingsKulu, PriitTribology of surface layers and coatings : proceedings of the 4th International Tribology Conference, PRAGOTRIB 2004 : Prague, Czech Republic, 17 and 18 June 20042004

Tribological behavior of hybrid coatings at extreme conditions = Hübriidpinnete triboloogiline käitumine ekstreemsetes tingimustesShaikh, Asad Alamgir2021 https://www.ester.ee/record=b5434621*est https://digikogu.taltech.ee/et/Item/2b9c25e8-2f7f-46ea-859a-366bf4b7f252 https://doi.org/10.23658/taltech.33/2021

Tribological studies on nc-TiC/a-C:H coatingsKollo, Lauri; Schwaller, P.; Michler, J.Engineerings Materials & Tribology 2004 : materials of the XIII-th International Baltic Conference : September 23-24, Riga, Latvia2004 / p. 130-131

Two-unit elastic system for vibration reduction of underground railwayKostarev, S.A.; Makhortykh, S.A.; Rybak, S.A.; Andreyev, N.N.Proceedings of the International EAA/EEAA Symposium : Transport Noise and Vibration, Tallinn, 8.06 - 10.06. 19981998 / p. 213-216: ill

Ultrafine alloy powders for corrosion and wear resistant coatingsKulu, Priit; Goljandin, Dmitri; Zimakov, SergeiProceedings of Joint Nordic Conference in Powder Technology combing The 5th Annual Finnish Powder Metallurgy Network Seminar : Tampere, Finland, 20032003 / p. 7

Upgrading the crush strenght of ammonium nitrate prills by coating with limestone or dolomite powderKlimova, Irina; Mikli, Valdek; Kaljuvee, Tiit6th International Granulation Workshop : Granulation Conference, Sheffield, UK, 26th-28th June 20132013 / p. 102

Uudsed pinnakatted puhastavad õhu kahjulikest viirustest ja bakteritest [Võrguväljaanne]Sydorenko, Jekaterinanovaator.err.ee2021 "Uudsed pinnakatted puhastavad õhu kahjulikest viirustest ja bakteritest"

Uut pinnakatte-paksusmõõturite töötlemisesLaaneots, Rein; Roosimölder, LembitTehnika ja Tootmine1987 / lk. 19-21 : ill https://www.ester.ee/record=b1073047*est

Wear of different PVD coatings at industrial fine-blanking field testsLind, Liina; Peetsalu, Priidu; Sergejev, FjodorMedžiagotyra = Materials science2015 / p. 343-348 : ill https://doi.org/10.5755/j01.ms.21.3.7249 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Wear of hard coatings evaluated by means of kaloMaxPodgurski, Vitali; Gregor, Andre; Adoberg, Eron; Kulu, Priit15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 64-65

Wear of hard coatings, evaluated by means of kaloMaxPodgurski, Vitali; Gregor, Andre; Adoberg, Eron; Kulu, PriitProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 419-426 : ill

Wear of PVD hard coatings in sliding contactsSivitski, Alina; Ajaots, Maido; Põdra, PriitProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 549-554 : ill http://innomet.ttu.ee/daaam08/online/Materials%20Engineering/Sivitski.pdf

Wear performance of PVD coated tool steelsTšinjan, Aleksei; Klaasen, Heinrich; Kübarsepp, Jakob; Adoberg, Eron; Sergejev, Fjodor; Talkop, AdolfEstonian journal of engineering2012 / p. 202-210 : ill

Wear resistance of high velocity thermal sprayed coatingsKulu, Priit; Veinthal, Renno9th Nordic Symposium on Tribology NORDTRIB 2000 : Porvoo, Finland, 11-14 June 2000. Vol. 12000 / p. 87-95 : ill

Wear resistance of laser cladded thermal sprayed coatingsSurženkov, Andrei; Kulu, Priit; Tarbe, Riho; Mikli, Valdek; Sarjas, Heikki; Latokartano, Jyrki18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 64

Wear resistance of thermal sprayed coatingsKulu, Priit; Pihl, Toomas; Zimakov, SergeiAbstracts of papers of International Conference Balttrib'991999 / p. 23

Wear resistance of thermal sprayed coatingsKulu, Priit; Pihl, Toomas; Zimakov, SergeiInternational Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings1999 / p. 311-318: ill

Wear resistance of thermal sprayed hardmetal coatingsKulu, PriitProceedings of 2000 International Conference on Powder Metallurgy & Particulate Materials2000 / p. 10

Wear resistant self-fluxing alloy based TiC-NiMo and Cr2C3-Ni hardmetal particles reinforced composite coatingsSurženkov, Andrei; Vallikivi, Ahto; Mikli, Valdek; Viljus, Mart; Vilgo, Timo; Kulu, PriitProceedings of the 2nd International Scientific Conference Manufacturing Engineering & Management 2012 : ICMEM 20122012 / p. 33-36 : ill https://www.researchgate.net/publication/262731588_WEAR_RESISTANT_SELF-FLUXING_ALLOY_BASED_TIC-NIMO_AND_CR2C3-NI_HARDMETAL_PARTICLES_REINFORCED_COMPOSITE_COATINGS

Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powdersSarjas, Heikki; Goljandin, Dmitri; Kulu, Priit; Mikli, Valdek; Surženkov, Andrei20th International Baltic Conference Materials Engineering 2011, October 27-28, Kaunas, Lithuania : book of abstracts2011 / p. 25

Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powdersSarjas, Heikki; Goljandin, Dmitri; Kulu, Priit; Mikli, Valdek; Surženkov, Andrei; Vuoristo, PetriMaterials science = Medžiagotyra2012 / p. 34-39 : ill https://matsc.ktu.lt/index.php/MatSc/article/view/1338

Wear-resistant composite coatings, surface engineeringKulu, Priit; Zimakov, SergeiEuromat '99. Vol. 112000 / p. 144-145

Wear-resistant composite hard metal consisting coatingsKulu, Priit; Arensburger, Daniil; Tümanok, Aleksei; Pihl, Toomas; Halling, JaanusInternational DAAAM : [DAAAM National Estonia] : proceedings of the 1st International Conference, 25-27th September 1997, Tallinn, Estonia1997 / p. 160-164: ill

Wear-resistant detonation sprayed WC-Co coatingsKulu, Priit; Zimakov, SergeiProceedings of the Third National DAAAM Conference in Estonia : SCIENCE '981998 / p. 94-96: ill

Wear-resistant thermal sprayed coatings on the base of recycled hardmetalKulu, Priit; Zimakov, SergeiAbstracts of the Fifth IUMRS International Conference on Advanced Materials, 1999, China1999 / X-37, p. 259 https://www.sciencedirect.com/science/article/pii/S0257897200006873

Wear-resistant WC-Co-NiCrSiB composite coatingsKulu, Priit; Pihl, Toomas; Halling, JaanusNORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998. Vol. 21998 / p. 809-818

Verfahren zum Kalibrieren von SchichtdickenmessgerätenLaaneots, ReinProceedings of the Second National DAAAM Conference in Estonia : Science'961997 / p. 68-74: ill

Vorrichtung zum  Eichen und Einmessen von SchichtdickenmeßgerätenLaaneots, Rein; Dill, E.Feingerätetechnik : wissenschaftlich-technische Zeitschrift für Entwicklung, Fertigung und Anwendung von Feingeräten1977 / S. 117-119 : Ill https://www.ester.ee/record=b1511033*est

Адгезия эпоксидных компаундов к металлам и антиадгезионные покрытияArumäe, Heino; Lohk, E.Применение эпоксидных компаундов в электротехнических изделиях : обзор научно-исследовательских работ и производственного опыта1969 / с. 86-90 : ил https://www.ester.ee/record=b1338807*est

Аттестация мер толщины покрытийLaaneots, ReinОпыт внедрения прогрессивных методов и средств технического контроля качества : Материалы к краткосрочному семинару. 27-28 мая1975 / с. 50-53 : рис

Влияние интенсивности транспорта и поверхности свойств дорог при безопасности движения автомашинКрайчович М.; Коханик И.Научная конференция " Безопасность движения", Таллинн, 14-15 ноября 1990 г. : тезисы1990 / с. 132-137: ил

Влияние порошковой основы на структуру и свойства защитных покрытий на нихKulu, Priit; Halling, JaanusXIII Всесоюзная научно-техническая конференция по тепловой микроскопии "Структура и прочность материалов в широком диапазоне температур", 24-26 окт. 1989 г. : Сборник тезисов докладов ; Ч. 21989 / с. 76-78

Газоабразивный износ газотермических порошковых покрытийKulu, Priit; Kallas, Paul; Halling, JaanusСвойства и технология изготовления износостойких материалов1984 / с. 47-52

Газотермические покрытия на порошковых материалахKulu, PriitПрименение порошковых, композиционных материалов и покрытий в машиностроении : Тезисы докладов Уралальской региональной конференции по порошковой металлургии и композиционным материалам1985 / с. 66

Газотермические покрытия на порошковых материалах. Сообщение 1. Наплавленные порошковые покрытияKulu, Priit; Halling, JaanusПорошковая металлургия = Powder metallurgy : ежемесячный научно-технический журнал1986 / с. 75-80 : ил https://www.ester.ee/record=b1645489*est

Газотермические покрытия на порошковых материалах. Сообщение 2. Наплавленные порошковые покрытияKulu, Priit; Halling, JaanusПорошковая металлургия = Powder metallurgy : ежемесячный научно-технический журнал1986 / с. 60-64 : ил https://www.ester.ee/record=b1645489*est

Дисперсно-армированные отделочные композиции на основе промышленных отходов : автореферат ... кандидата технических наук (05.23.05)Lõhmus, Leho1991 http://www.ester.ee/record=b1258541*est

Дисперсно-армированные отделочные композиции на основе промышленных отходов : диссертация ... кандидата технических наук : 05.23.05 - строительные материалы и изделияLõhmus, Leho1991 http://www.ester.ee/record=b2488589*est

Защитные покрытия на порошковых сталяхKulu, Priit; Halling, JaanusTallinna Tehnikaülikooli Toimetised1990 / lk. 28-35: ill

Износостойкие диффузионные карбидные покрытия из жидких насыщающих средБорисов Ю.С.; Шавловский Е.Н.; Капорик Н.И.; Солдатов Б.Ф.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 48-50

Износостойкие материалы системы карбонитрид титана - карбид кремния - нитрид алюминияКазаков В.К.; Дуб С.Н.; Любимов В.Д.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 22-23

Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 https://www.ester.ee/record=b1235787*est

Износостойкие порошковые твердосплавные покрытияHalling, Jaanus; Kulu, Priit; Kallas, PaulСвойства и технология изготовления композиционных материалов1986 / с. 45-51

Износостойкие порошковые твердосплавные покрытияPeitre, T.; Kulu, PriitXXX студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 8-10 апреля 1986 года : тезисы докладов. Том II, Автоматика. Энергетика. Механика. Химия1986 / с. 131 https://www.ester.ee/record=b1305565*est

Износостойкость порошковых покрытий в условиях коррозионно-абразивного изнашиванияKulu, Priit; Rõuk, Arno; Rõuk, MarinaИзносостойкие спеченные материалы и покрытия1988 / с. 56-61

Износостойкость порошковых покрытий и пути ее повышенияKulu, PriitИзносостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 33-34

Исследование весового метода для аттестации мер толщины пленокLaaneots, Rein; Saar, BernhardСборник статей по машиностроению. 81971 / с. 71-77 : илл https://www.ester.ee/record=b2190317*est https://digikogu.taltech.ee/et/Item/9e5336a6-6d17-4555-8a2c-a8b547231bbb/

Исследование весового метода измерения толщины покрытияPikner, A.; Potter, E.; Laaneots, ReinXX студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР : тезисы докладов. Часть 11974 / с. 190 https://www.ester.ee/record=b1306141*est

Исследование процесса напыления и свойств износостойких порошковых покрытий, полученных методом импульсного плазменного напыленияГасин Д.А.; Кораблева И.Р.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 47-48

Исследование способов нанесения карбидохромовых покрытий на спеченные сталиKulu, PriitПорошковая металлургия и область ее применения : Тезисы докладов к областному семинару (11-12 мая 1982 г.)1982 / с. 70-71

К вопросу уточнения континуальных уравнений гиперболопараболоидальных висячих покрытий с эллиптическим контуромHallang, TiinaТезисы докладов республиканской научной конференции "Тонкостенные и пространственные конструкции" : с 14 по 16 ноября 1978 года1978 / с. 28-29 https://www.ester.ee/record=b1314933*est

Карбидохромовые покрытия на спеченных сталяхKulu, Priit; Päärsoo, Riho; Pajundi, H.Свойства и технология изготовления износостойких материалов1980 / с. 19-24 : илл https://www.ester.ee/record=b1276393*est https://digikogu.taltech.ee/et/Item/be560987-a637-4f71-93da-1a9ee9705512

Карбидохромовые покрытия на спеченных сталяхKulu, Priit; Pirso, Jüri; Arensburger, DaniilВсесоюзная научно-техническая конференция "Проблемы порошковой металлургии при производстве деталей в машиностроении" (г. Ташкент, ноябрь 1979 г.) : Тезисы докладов1979 / с. 107-108

Клинообразная мера толщины покрытияLaaneots, ReinИзмерительная техника : ежемесячный научно-технический журнал1978 / с. 22 : ил., таб https://www.ester.ee/record=b1448551*est

Комплексный анализ фосфатных покрытий и шламовTõnsuaadu, Kaia; Veiderma, Mihkel; Takkin, Rutt; Nemes, KatalinEesti NSV Teaduste Akadeemia toimetised. Keemia = Proceedings of Academy of Sciences of the Estonian SSR. Chemistry = Известия Академии наук Эстонской ССР. Химия1989 / с. 135-138 : илл https://www.ester.ee/record=b1264984*est https://www.etera.ee/zoom/18882/view?page=1&p=separate&tool=info

Мера толщины покрытия для поверки толщиномеров : [А.с. 1594349]Laaneots, Andres; Laaneots, ReinОткрытия. Изобретения1990 / 35, с. 171

Меры толщины покрытийLaaneots, ReinИзмерения, контроль, автоматизация1990 / 2

Меры толщины покрытий двухслойные. ПроспектLaaneots, Rein1986

Меры толщины покрытий универсальные. ПроспектLaaneots, Rein1986

Меры толщины покрытий. ПроспектLaaneots, Rein1986

Метод калибровки эталонов толщины покрытияLaaneots, Rein; Riim, JürgenСистеми обробки інформаціi2010 / с. 96-100 : ил

Методика проверки бетатолщиномеров покрытийPikner, A.; Potter, E.; Laaneots, ReinXX студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР : тезисы докладов. Часть 11974 / с. 191 https://www.ester.ee/record=b1306141*est

Методы и средства для поверки толщиномеров покрытийLaaneots, Rein1989 https://www.ester.ee/record=b1285532*est

Методы и средства для поверки толщиномеров покрытий : автореферат диссертации на соискание ученой степени доктора технических наук (05.11.01 ; 05.11.15)Laaneots, Rein1990 http://www.ester.ee/record=b1519875*est

Методы и средства для поверки толщиномеров покрытий : специальности: 05.11.01 - приборы и методы измерения механическич величин ; 05.11.15 - метрология и метрологическое обеспечениеLaaneots, Rein1989 http://www.ester.ee/record=b2641849*est

Механизм газоабразивного изнашивания порошковых покрытийKallas, Paul; Kulu, Priit; Halling, JaanusТрение и износ в машинах. 131985 / с. 37-45

Наплавленные карбидохромовые покрытияArensburger, Daniil; Pirso, JüriЗащита металлов1982 / с. 659-660

Некоторые свойства износостойких эмалевых покрытий, содержащих тугоплавкие карбидыArensburger, Daniil; Pirso, JüriСвойства и технология изготовления износостойких материалов1980 / с. 3-9 : илл https://www.ester.ee/record=b1276393*est https://digikogu.taltech.ee/et/Item/be560987-a637-4f71-93da-1a9ee9705512

Новые технологии осаждения износостойких покрытийКоняшин И.Ю.; Аникеев А.И.; Леонов Е.Ю.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 44-46

О применении комбинированных электрофизических покрытий на поверхности токопроводящих элементов вторичной системы и винтового канала МГД устройствReimal, LembitСборник материалов к VI Таллинскому совещанию по электромагнитным расходомерам и электротехнике жидких проводников1975 / с. 132-144 : ил., табл https://www.ester.ee/record=b1322170*est

О статическом расчете предварительно напряженных сетчатых висячих покрытий с конечным числом вантKulbach, ValdekТезисы докладов республиканской научной конференции "Тонкостенные и пространственные конструкции" : с 14 по 16 ноября 1978 года1978 / c. 29-30 https://www.ester.ee/record=b1314933*est

Об определении силы адгезии краски на поверхности изделий из полиэтиленаPiiroja, Eduard; Adrat, M.Технология органических веществ. 11969 / с. 49-54 https://www.ester.ee/record=b1337236*est https://digikogu.taltech.ee/et/Item/d6e3c08c-1c99-48a8-ae34-e91a3f1c8d0d

Об увеличения износостойкости поверхности вибросепараторовБессараба В.И.; Деревянко Т.П.; Дубровский В.П.; Лось Л.В.; Pappel, ToivoКомпозиционные покрытия : тезисы докладов IV Всесоюзной научно-технической конференции, Житомир, 19911991 / с. 33-34

Об учете геометрической нелинейности деформации контура при расчете седловидных висячих покрытийHallang, TiinaТезисы докладов республиканской научной конференции "Тонкостенные и пространственные конструкции" : с 14 по 16 ноября 1978 года1978 / с. 27-28 https://www.ester.ee/record=b1314933*est

Обеспечение единства измерений толщин пленок и покрытийBoguslavski, M.; Laaneots, ReinОпыт внедрения методов и средств технического контроля качества на предприятиях Ленинграда : материалы к краткосрочному семинару 16-18 мая1972 / с. 86-87

Особенности абразивной износостойкости защитных покрытий на спеченных сталяхKulu, PriitИсследование и разработка теоретических проблем в области порошковой металлургии и защитных покрытий : Материалы всесоюзной конференции, Минск, 24-26 мая 1983 г. Ч. 3 : Принципы оптимизации структуры и свойств порошковых материалов и защитных покрытий1984 / с. 145-149

Особенности создания эрозионностойких газотермических покрытий на порошковых материалахKulu, PriitСвойства и технология изготовления износостойких материалов1984 / с. 35-40

Перспективы использования защитно-износостойких покрытий на заводе "Ильмарине"Arensburger, Daniil; Pihl, Toomas; Rõuk, ArnoTallinna Tehnikaülikooli Toimetised1990 / lk. 19-27: ill

Поверка толщиномеров пленокLaaneots, ReinСборник статей по машиностроению. 81971 / с. 79-86 https://www.ester.ee/record=b2190317*est https://digikogu.taltech.ee/et/Item/9e5336a6-6d17-4555-8a2c-a8b547231bbb/

Пригласительный билет и программа [пятой республиканской конференции "Эрозионностойкие порошковые материалы и покрытия"]1988 https://www.ester.ee/record=b5355566*est

Принципы создания эрозионностойких порошковых материалов и покрытийKulu, PriitИзносостойкие спеченные материалы и покрытия1988 / с. 51-55

Прогнозирование износостойкости порошковых материалов и покрытий в условиях абразивной эрозииKulu, Priit; Tammeraid, Ivar; Halling, JaanusТрение и износ в машинах. 141987 / с. 32-40

Прогнозирование износостойкости порошковых материалов и покрытий в условиях абразивной эрозииKulu, PriitТрение и износ = Friction and Wear : международный научный журнал1988 / с. 919-925 : ил https://www.ester.ee/record=b1312784*est

Разработка и исследование методов и образцовых средств для поверки толщиномеров пленок (покрытий) : автореферат ... кандидата технических наук (05.11.15)Laaneots, Rein1973 http://www.ester.ee/record=b1345650*est

Расчет износа гетерогенных порошковых материалов и покрытийKulu, Priit; Halling, JaanusТрение и износ в машинах. 151989 / с. 46-52

Расчетная оценка начальной формы предварительно напряженных сетчатых висячих покрытийKulbach, ValdekТезисы докладов республиканской научной конференции "Тонкостенные и пространственные конструкции" : с 14 по 16 ноября 1978 года1978 / с. 30-31 https://www.ester.ee/record=b1314933*est

Способы поверки толщиномеров покрытийLaaneots, ReinИзмерения, контроль, автоматизация1983 / с. [?]

Средства для поверки толщиномеров покрытийLaaneots, ReinИзмерительная техника : ежемесячный научно-технический журнал1982 / с. 25-27 : рис https://www.ester.ee/record=b1448551*est

Средства для поверки толщиномеров покрытийLaaneots, ReinИзмерительная техника1991 / 11, с. 19-20: ил

Структура и свойства износостойких порошковых покрытий на спеченных сталяхHalling, Jaanus; Saarmann, M.XXVII студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 19-21 апреля 1983 г : тезисы докладов. Часть 21983 / с. 125 https://www.ester.ee/record=b1571566*est

Тезисы докладов пятой республиканской конференции "Эрозионностойкие порошковые материалы и покрытия"1988 https://www.ester.ee/record=b1256812*est

Термин "толщина покрытия" и его определениеVäljas, Mati; Laaneots, ReinИзмерительная техника1990 / 4, c. 17-18: рис

Устройства для поверки толшиномеров покрытийLaaneots, ReinКонтроль толщины покрытий и его метрологические обеспечение : тезисы докладов1990 / с. 48-49

Устройство для поверки толщинометров покрытийLaaneots, ReinИзобретения1992 / 22, с. 169

Устройство для поверки электромагнитных толщиномеров покрытийLaaneots, ReinИзмерительная техника : ежемесячный научно-технический журнал1978 / с. 27-28 : ил https://www.ester.ee/record=b1448551*est

Формирование гетерогенных покрытий на основе ультрадисперсного карбида вольфрамаБондаренко В.П.; Гуслиенко Ю.А.; Павлоцкая Э.Г.; Мартынова Л.М.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 46