Õhukesekileliste energiamaterjalide teaduslabor
Nimetus
Keemiliste kiletehnoloogiate teaduslabor (kuni 28.02.2023)
TalTech prioriteetne teadussuund
Klassifikaator (Frascati)
Uurimisrühma juht
Uurimisrühma liige
Doktorant
Võtmesõna
Ülevaade
Teaduslabori põhikompetentsid on:• metalloksiid ja -kalkogeniid õhukeste kilede ja nanostruktuursete kihtide väljatöötamine tööstuses rakendatavate keemiliste- ning vaakummeetoditega;• päikesepatareid;• fotokatalüütilised pinnakatted.Rakenduslik arendustöö on suunatud päikeseelementidel põhinevate nutikate elektrit tootvate teekatendite väljatöötamisele, mille tootmisega on alustanud ülikooli spin-off ettevõte E-Pavement.
Tähtsamad tulemused
2023. aasta olulisemate tulemustena saab välja tuua: akedanti uuest SbEX prekursorist pihustussadestatud Sb2S3 absorberkihti päikeseelemendis struktuuriga klaas/TCO/TiO2/Sb2S3/P3HT/Au, kus 75 nm paksune Sb2S3 kiht oli sadestatud TU/SbEX molaarsuhtel 4.5, antud päikesepatarei kasutegur on 4.1%; töötati välja CSS meetodil sadestatud Sb2S3 õhukeste kilede kasvuprotokollid ja näidati, et 300 ˚C juures kasvatatud Sb2S3 kiled on ühtlaselt katnud aluspinna ja kristallid omavad eelisorientatsiooni (hk1) tasapinna suunas, valmistatud päikeseelementide efektiivsus on 3.8%; Sb-kalkogeniidsetel materjalidel põhineva poolläbipaistvate päikeseelementide väljaarenduses floureenipõhiste orgaaniliste aukjuhtmaterjalide rakendamine tõstis päikeseelementide efektiivsust ca 60% võrreldes seadisega, kus aukjuhtkihti ei rakendatud.
Seotud projektid
Seotud struktuuriüksus
Teadusgrupiga seotud publikatsioonid
- Dittrich, T., Sydorenko, J., Spalatu, N., Nickel, N. H., Mere, A., Krunks, M., Oja Acik, I. Synthesis control of charge separation at anatase TiO2 thin films studied by transient surface photovoltage spectroscopy // ACS applied materials & interfaces (2022) 14, 38, p. 43163-43170.
https://doi.org/10.1021/acsami.2c09032 - Chen, Z., Dedova, T., Spalatu, N., Maticiuc, N., Rusu, M., Katerski, A., Oja Acik, I., Unold, T., Krunks, M. ZnO/NiO heterostructures with enhanced photocatalytic activity obtained by ultrasonic spraying of a NiO shell onto ZnO nanorods // Colloids and surfaces A : physicochemical and engineering aspects (2022) vol. 648, art. 129366.
https://doi.org/10.1016/j.colsurfa.2022.129366 - Juneja, N., Mandati, S., Katerski, A., Spalatu, N., Daskeviciute-Geguziene, S., Vembris, A., Karazhanov, S., Getautis, V., Krunks, M., Oja Acik, I. Sb2S3 solar cells with a cost-effective and dopant-free fluorene-based enamine as a hole transport material // Sustainable Energy & Fuels (2022) vol. 6, 13, p. 3220-3229.
https://doi.org/10.1039/D2SE00356B - Spalatu, N., Krautmann, R., Katerski, A., Karber, E., Josepson, R., Hiie, J., Acik, I. O., Krunks, M. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol : interrelation between grain structure, interface intermixing and solar cell performance // Solar energy materials and solar cells (2021) vol. 225, art. 111045, 13 p. : ill.
https://doi.org/10.1016/j.solmat.2021.111045 - Eensalu, J. S., Tõnsuaadu, K., Adamson, J., Oja Acik, I., Krunks, M. Thermal decomposition of tris(O-ethyldithiocarbonato)-antimony(III) - a single-source precursor for antimony sulfide thin films // Journal of thermal analysis and calorimetry (2022) vol. 147, 8, p. 4899-4913 : ill.
https://doi.org/10.1007/s10973-021-10885-1 - Dundar, I., Mere, A., Mikli, V., Krunks, M., Oja Acik, I. Thickness effect on photocatalytic activity of TiO2 thin films fabricated by ultrasonic spray pyrolysis // Catalysts (2020) vol. 10, 9, art. 1058.
https://doi.org/10.3390/catal10091058 - Pappu, S., Nanaji, K., Mandati, S., Rao, T. N., Martha, S. K., Bulusu, S. V. Cost-effective synthesis of electrodeposited NiCo2O4 nanosheets with induced oxygen vacancies : a highly efficient electrode material for hybrid supercapacitors // Batteries and supercaps (2020) Vol. 3, p. 1209-1219.
https://doi.org/10.1002/batt.202000121 - Krautmann, R., Spalatu, N., Gunder, R., Abou-Ras, D., Unold, T., Schorr, S., Krunks, M., Oja Acik, I. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation : [journal article] // Solar energy (2021) vol. 225, p. 494-500.
https://doi.org/10.1016/j.solener.2021.07.022 - Chen, Z., Dedova, T., Oja Acik, I., Danilson, M., Krunks, M. Nickel oxide films by chemical spray : effect of deposition temperature and solvent type on structural, optical, and surface properties // Applied surface science (2021) vol. 548, art. 149118.
https://doi.org/10.1016/j.apsusc.2021.149118 - Oluwabi, T.A., Katerski, A., Mere, A., Krunks, M., L., Oja Acik, I. et al. Application of ultrasonic sprayed zirconium oxide dielectric in zinc tin oxide-based thin film transistor // Journal of materials chemistry C (2020) vol. 8, 11, p. 3730-3739 : ill.
https://doi.org/10.1039/C9TC05127A - Ping, K., Brascinsky, A., Alam, M., Bhadoria, R., Mikli, V., Mere, A., Starkov, P. et al. Fused hybrid linkers for metal–organic framework-derived bifunctional oxygen electrocatalysts // ACS Applied Energy Materials (2020) vol. 3, 1, p. 152–157 : ill.
https://doi.org/10.1021/acsaem.9b02039 - Eensalu, J. S., Tõnsuaadu, K., Oja Acik, I., Krunks, M. Sb2S3 thin films by ultrasonic spray pyrolysis of antimony ethyl xanthate // Materials science in semiconductor processing (2022) Vol. 137, art. 106209 : ill.
https://doi.org/10.1016/j.mssp.2021.106209 - Polivtseva, S., Spalatu, N., Abdalla, A., Volobujeva, O., Hiie, J., Bereznev, S. Pulsed laser deposition of Zn(O,Se) layers for optoelectronic application // ACS Applied Energy Materials (2018) vol. 1, 11, p. 6505–6512 : ill.
http://dx.doi.org/10.1021/acsaem.8b01431 - Oluwabi, A. T., Gaspar, D., Katerski, A., Mere, A., Krunks, M., Pereira, L., Oja Acik, I. Influence of post-UV/ozone treatment of ultrasonic-sprayed zirconium oxide dielectric films for a low-temperature oxide thin film transistor // Materials (2020) vol. 13, 1, art. 6, 14 p. : ill.
https://doi.org/10.3390/ma13010006 - Gaffuri, P., Dedova, T., Appert, E., Danilson, M., Oja-Acik, I., et al. Enhanced photocatalytic activity of chemically deposited ZnO nanowires using doping and annealing strategies for water remediation // Applied surface science (2022) vol. 582, art. 152323.
https://doi.org/10.1016/j.apsusc.2021.152323 - Dedova, T., Acik Oja, I., Chen, Z., Katerski, A., Balmassov, K., Gromyko, I., Krunks, M. et al. Enhanced photocatalytic activity of ZnO nanorods by surface treatment with HAuCl4 : synergic effects through an electron scavenging, plasmon resonance and surface hydroxylation // Materials chemistry and physics (2020) vol. 245, art. 122767.
https://doi.org/10.1016/j.matchemphys.2020.122767 - Mandati, S., Dileep, R., Veerappan, K. G., Ramasamy, E. Large area bar coated TiO2 electron transport layers for perovskite solar cells with excellent performance homogeneity // Solar Energy (2022) vol. 240, p. 258-268.
https://doi.org/10.1016/j.solener.2022.04.060 - Tiismus, H., Kallaste, A., Vaimann, T., Lind, L., Virro, I., Rassõlkin, A., Dedova, T. Laser additively manufactured magnetic core design and process for electrical machine applications // Energies (2022) vol. 15, 10, art. 3665.
https://doi.org/10.3390/en15103665 - Montero, J., Welearegay, T., Thyr, J., Dedova, T., Oja Acik, I. et al. Copper–zinc oxide heterojunction catalysts exhibiting enhanced photocatalytic activity prepared by a hybrid deposition method // RSC advances (2021) vol. 11, 17, p. 10224−10234.
https://doi.org/10.1039/d1ra00691f - Koltsov, M., Krautmann, R., Katerski, A., Maticiuc, N., Krunks, M., Oja Acik, I., Spalatu, N. A post-deposition annealing approach for organic residues control in TiO2 and its impact on Sb2Se3/TiO2 device performance // Faraday Discussions (2022) vol. 239, p. 273-286.
https://doi.org/10.1039/D2FD00064D - Mandati, S., Sarada, B. V. Electrodeposited chalcopyrite CuInGaSe2 absorbers for solar energy harvesting // Materials science for energy technologies (2020) Vol. 3, p. 440-445 : ill.
https://doi.org/10.1016/j.mset.2020.03.001 - Boosagulla, D., Mandati, S., Misra, P., Allikayala, R., Sarada, B. V. Pulse electrodeposited zinc sulfide as an eco-friendly buffer layer for the cadmium-free thin-film solar cells // Superlattices and microstructures (2021) vol. 160, art. 107060.
https://doi.org/10.1016/j.spmi.2021.107060 - Shtepliuk, I., Khranovskyy, V., Gogova, D., Danilson, M., Krunks, M. et al. Excitonic emission in heavily Ga-doped zinc oxide films grown on GaN // Journal of luminescence (2020) vol. 223, art. 117265, 10 p. : ill.
https://doi.org/10.1016/j.jlumin.2020.117265 - Dileep, K. R., Mandati, S., Ramasamy, E., Mallick, S., Rao, T. N., Veerappan, G. Rapid assessment of photovoltaic activity of perovskite solar cells by photoluminescence spectroscopy // Materials letters (2021) vol. 299, art. 130056, 4 p. : ill.
https://doi.org/10.1016/j.matlet.2021.130056 - Ping, K., Alam, M., Kahnert, S. R., Bhadoria, R., Mere, A., Mikli, V., Käärik, M., Aruväli, J., Paiste, P., Kikas, A., Kisand, V., Järving, I., Leis, J., Kongi, N., Starkov, P. Multi-purpose heterogeneous catalyst material from an amorphous cobalt metal–organic framework // Materials advances (2021) vol. 2, p. 4009-4015.
https://doi.org/10.1039/D1MA00414J - Spiridonova, J., Mere, A., Krunks, M., Rosenberg, M., Kahru, A,, Danilson, M., Kritševskaja, M., Oja Acik, I. Enhanced visible and ultraviolet light-induced gas-phase photocatalytic activity of TiO2 thin films modified by increased amount of acetylacetone in precursor solution for spray pyrolysis // Catalysts (2020) vol. 10, 9, 21 p. : ill.
https://doi.org/10.3390/catal10091011 - Hector, G., Eensalu, J. S., Katerski, A., Oja Acik, I., Kärber, E. et al. Optimization of the Sb2S3 shell thickness in ZnO nanowire-based extremely thin absorber solar cells // Nanomaterials (2022) vol. 12, 2, art. 198.
https://doi.org/10.3390/nano12020198 - Misra, P., Atchuta, S. R., Mandati, S., Sarada, B. V., Rao, T. N., Sakthivel, S. A non-vacuum dip coated SiO2 interface layer for fabricating CIGS solar cells on stainless steel foil substrates // Solar energy (2021) Vol. 214, p. 471−477 : ill.
https://doi.org/10.1016/j.solener.2020.12.007 - Raadik, T., Spalatu, N., Krustok, J., Josepson, R., Grossberg, M. Temperature dependent optical and electrical characterization of SnS/CdS solar cell // Thin Solid Films (2022) vol. 743, art. 139069.
https://doi.org/10.1016/j.tsf.2021.139069 - Mandati, S., Misra, P., Boosagulla, D., Rao, T. N., Sarada, B. V. Economic pulse electrodeposition for flexible CuInSe(2)solar cells // Materials for renewable and sustainable energy (2020) Vol. 9, art. 19, 6 p. : ill.
https://doi.org/10.1007/s40243-020-00177-3 - Mandati, S., Misra, P., Boosagulla, D., Tata, N. R., Bulusu, S. V. Solar energy harvesting through photovoltaic and photoelectrochemical means from appositely prepared CuInGaSe2 absorbers on flexible substrates by a low-cost and industrially benign pulse electrodeposition technique // Industrial and engineering chemistry research (2021) Vol. 60, 5, p. 2197–2205.
https://doi.org/10.1021/acs.iecr.0c05934 - Tarraste, M., Kübarsepp, J., Mere, A., Juhani, K., Kolnes, M., Viljus, M. Ultrafine cemented carbides with cobalt and iron binders prepared via reactive in situ sintering // Solid state phenomena ; 320. : Trans Tech Publications Ltd, 2021. p. 176-180.
https://doi.org/10.4028/www.scientific.net/SSP.320.176 - Tarraste, M., Kübarsepp, J., Juhani, K., Kolnes, M., Viljus, M., Mere, A. Sintering of high Mn cemented carbides in Mn-rich environment // Defect and diffusion forum (2020) vol. 405, p. 402−407.
https://doi.org/10.4028/www.scientific.net/DDF.405.402 - Sydorenko, J., Mere, A., Krunks, M., Krichevskaya, M., Oja Acik, I. Transparent TiO2 thin films with high photocatalytic activity for indoor air purification // RSC advances (2022) 12, 55, p. 35531-35542.
https://doi.org/10.1039/D2RA06488J - Mandati, S., Misra, P., Boosagulla, D., Tata, N. R., Bulusu, S. V. Control over MoSe2 formation with vacuum-assisted selenization of one-step electrodeposited Cu-In-Ga-Se precursor layers // Environmental science and pollution research (2021) vol. 28, 12, p. 15123-15129 : ill.
https://doi.org/10.1007/s11356-020-11783-z - Svirskaite, L. M., Mandati, S., Spalatu, N., Malinauskiene, V., Karazhanov, S., Getautis, V., Malinauskas, T. Asymmetric NDI electron transporting SAM materials for application in photovoltaic devices // Synthetic metals (2022) vol. 291, art. 117214.
https://doi.org/10.1016/j.synthmet.2022.117214 - Andreasen, J. W., Arca, E., Bowers, J. W., Bär, M., Breternitz, J., Dale, P. J., Dimitrievska, M., Fermin, D. J., Ganose, A., Mandati, S. et al. Novel chalcogenides, pnictides and defect-tolerant semiconductors : general discussion // Faraday Discussions (2022) vol. 239, p. 287-316.
https://doi.org/10.1039/D2FD90057B - Olukan, T., Sydorenko, J., Katerski, A., Al Mahri, M., Lai, C.-Y., Al-Hagri, A., Santos, S., Chiesa, M. Insights into TiO2 thin film photodegradation from Kelvin Probe AFM maps // Applied physics letters (2022) vol. 121, 3, art. 031901.
https://doi.org/10.1063/5.0098788 - Boosagulla, D., Mandati, S., Allikayala, R., Sarada, B.V. Growth mechanism of pulse electrodeposited cadmium sulfide and zinc sulfide thin films with tartaric acid and glycerol as additives // Thin Solid Films (2021) vol. 741, art. #139011.
https://doi.org/10.1016/j.tsf.2021.139011 - Surženkov, A., Viljus, M., Antonov, M., Kübarsepp, J., Juhani, K., Kulu, P., Vägiström, H., Jankauskas, V., Leišys, R., Bendikiene, R., Adoberg, E., Peetsalu, P., Mere, A., Gregor, A. Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substrates // Surface and coatings technology (2022) vol. 446, art. 128771.
https://doi.org/10.1016/j.surfcoat.2022.128771 - Jalakas, T., Chub, A., Vinnikov, D., Spalatu, N., Gudkova, V., Krunks, M., Mere, A.,,Lahi, A., Lindvest, A. Development and application of energy producing solar pavement in Estonia // 2022 IEEE 63th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON): conference proceedings. : IEEE, 2022. 5 p. : ill.
https://doi.org/10.1109/RTUCON56726.2022.9978908 - Andreasen, J. W., Breternitz, J., Bär, M., Dale, P. J., Dimitrievska, M., Fermin, D. J., Fleck, N., Hages, C. J., Havryliuk, Y., Hawkins, C., Mandati, S. et al. Bulk and surface characterisation techniques of solar absorbers : general discussion // Faraday Discussions (2022) vol. 239, p. 180-201.
https://doi.org/10.1039/D2FD90056D - Agbenyeke, R., Andreasen, J. W., Benhaddou, N., Bowers, J. W., Breternitz, J., Bär, M., Dimitrievska, M., Fermin, D. J., Ganose, A., Mandati, S. et al. Materials design and bonding : general discussion // Faraday Discussions (2022) vol. 239, p. 375-404.
https://doi.org/10.1039/D2FD90058K - Andreasen, J. W., Bowers, J. W., Breternitz, J., Dale, P. J., Dimitrievska, M., Fermin, D. J., Ganose, A., Gurieva, G., Hages, C. J., Mandati, S. et al. Indium-free CIGS analogues : general discussion // Faraday Discussions (2022) vol. 239, p. 85-111.
https://doi.org/10.1039/D2FD90055F - Untila, D., Evtodiev, I., Caraman, I., Spalatu, N., Dmitroglo, L., Caraman, M. Optical and photoelectric properties of nanolamellar structures obtained by thermal annealing of InSe plates in Zn vapours // Physica status solidi (a) : applications and materials science (2018) vol. 215, 4, art. 1700434, p. 1-7 : ill.
https://doi.org/10.1002/pssa.201700434 - Ganchev, M., Dimitrov, D., Stankova, S., Katerski, A., Gadjov, I., Volobujeva, O., Mere, A., Bereznev, S., Krunks, M. Electrodeposited molybdenum oxide coatings for thin film chalcopyrite solar cells // 10th Jubilee Conference of the Balkan Physical Union. New York : AIP, 2019. art. 140002. (AIP Conference Proceedings ; 2075, 1).
https://doi.org/10.1063/1.5091317 - Ganchev, M., Katerski, A., Stankova, S., Eensalu, J. S., Terziyska, P. et al. Tin dioxide thin films deposited by sol - gel technique // AIP conference proceedings. New York : AIP, 2019. art. 140001, 8 p. (AIP Conference Proceedings; 2075A).
https://doi.org/10.1063/1.5091316 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Viljus, M. Effect of carbon stabilizing elements on WC cemented carbides with chromium steel binder // Materials science = Medžiagotyra (2019) vol. 25, 2, p. 202-206 : ill.
https://doi.org/10.5755/j01.ms.25.2.19619 - Misra, P., Mandati, S., Rao, T. N., Sarada, B. V. A multi-layer Cu:Ga/In sputtered precursor to improve structural properties of CIGS absorber layer // Materials today: proceedings (2021) vol. 39, 5, p. 2037-2041 : ill.
https://doi.org/10.1016/j.matpr.2020.09.545 - Chandra Dimri, M., Khanduri, H., Mere, A., Stern, R. Studies of doped LaMnO3 samples prepared by citrate combustion process // AIP conference proceedings. [S.l.] : AIP, 2018. art. 130015, 4 p. : ill. (AIP conference proceedings ; 1942, 1).
https://doi.org/10.1063/1.5029085 - Eensalu, J.S., Katerski, A., Mere, A., Krunks, M. Gas sensing capability of spray deposited Al-doped ZnO thin films // Proceedings of the Estonian Academy of Sciences (2018) vol. 67, 2, p. 124–130 : ill.
https://doi.org/10.3176/proc.2018.2.02 - Gromõko, I., Dedova, T., Polivtseva, S., Kois, J., Puust, L., Sildos, I., Mere, A., Krunks, M. Electrodeposited ZnO morphology transformations under the influence of SeO2 additive: Rods, disks, nanosheets network // Thin solid films (2018) vol. 652, p. 10-15 : ill.
https://doi.org/10.1016/j.tsf.2017.12.004 - Krustok, J., Raadik, T., Kaupmees, R., Grossberg, M., Kauk-Kuusik, M., Timmo, K., Mere, A. Observation of band gap fluctuations and carrier localization in Cu2CdGeSe4 // Journal of physics D : applied physics (2019) vol. 52, 28, art. 285102 , 7 p. : ill.
https://doi.org/10.1088/1361-6463/ab1afd - Dedova, T., Oja Acik, I., Polivtseva, S., Krunks, M., Gromõko, I., Tõnsuaadu, K., Mere, A. Influence of solution composition on sprayed ZnO nanorods properties and formation process: Thermoanalytical study of the precursors // Ceramics international (2019) vol. 45, 2, p. 2887-2892 : ill.
https://doi.org/10.1016/j.ceramint.2018.07.274 - Grossberg, M. Raadik, T., Krustok, J., Kauk-Kuusik, M. et al. Optical and structural properties of orthorhombic and tetragonal polymorphs of Cu2CdGeSe4 // Thin solid films (2018) vol. 666, p. 44-47.
https://doi.org/10.1016/j.tsf.2018.09.031 - Ganchev, M., Katerski, A., Stankova, S., Eensalu, J. S., Terziyska, P. et al. Spin - coating of SnO2 thin films // Journal of physics : conference series (2019) vol. 1186, art. 012027, 7 p. : ill.
https://doi.org/10.1088/1742-6596/1186/1/012027 - Chen, Z., Dündar, I., Oja Acik, I., Mere, A. TiO2 thin films by ultrasonic spray pyrolysis // IOP conference series : materials science and engineering (2019) vol. 503, art. 012006, 7 p. : ill.
https://doi.org/10.1088/1757-899X/503/1/012006 - Leontie, L., Sprincean, V., Untila, D., Spalatu, N. et al. Synthesis and optical properties of Ga2O3 nanowires grown on GaS substrate // Thin solid films (2019) vol. 689, art. 137502, 6 p. : ill.
https://doi.org/10.1016/j.tsf.2019.137502 - Abdalla, A., Bereznev, S., Spalatu, N., Volobujeva, O., Sleptšuk, N., Danilson, M. Pulsed laser deposition of Zn(O,Se) layers in nitrogen background pressure // Scientific reports (2019) vol. 9, 1, art. 17443, 10 p. : ill.
https://doi.org/10.1038/s41598-019-54008-1 - Mandati, S., Misra, P., Sarada, B. V., Rao, T. N. Copper chalcopyrites for solar energy applications // Transactions of the Indian Institute of Metals (2019) Vol. 72, 2, p. 271–288 : ill.
https://doi.org/10.1007/s12666-018-1455-0 - Oluwabi, A.T., Juma, A.O., Oja Acik, I., Mere, A., Krunks, M. Effect of Zr doping on the structural and electrical properties of spray deposited TiO2 thin films // Proceedings of the Estonian Academy of Sciences (2018) Vol. 67, 2, p. 147–157 : ill.
https://doi.org/10.3176/proc.2018.2.05 https://artiklid.elnet.ee/record=b2861743*est - Dundar, I., Kritševskaja, M., Katerski, A., Krunks, M., Oja Acik, I. Photocatalytic degradation of different VOCs in the gas-phase over TiO2 thin gilms prepared by ultrasonic spray pyrolysis // Catalysts (2019) vol. 9, 11, art. 915 ; 18 p. : ill.
https://doi.org/10.3390/catal9110915 - Klauson, D., Romero Sarcos, N., Kritševskaja, M., Kattel, E., Dulova, N., Dedova, T., Trapido, M. Advanced oxidation processes for sulfonamide antibiotic sulfamethizole degradation : Process applicability study at ppm level and scale-down to ppb level // Journal of environmental chemical engineering (2019) vol. 7, 5, art. 103287, 8 p. : ill.
https://doi.org/10.1016/j.jece.2019.103287 - Kolnes, M., Mere, A., Kübarsepp, J., Viljus, M., Maaten, B., Tarraste, M. Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder // Powder metallurgy (2018) vol. 61, 3, p. 197-209 : ill.
https://doi.org/10.1080/00325899.2018.1447268 - Podgurski V., Bogatov, A., Yashin, M., Viljus, M., Volobujeva, O., Mere, A., Raadik, T. et al. A comparative study of the growth dynamics and tribological properties of nanocrystalline diamondfilms deposited on the (110) single crystaldiamond and Si(100) substrates // Diamond and related materials (2019) vol. 92, p. 159-167 : ill.
https://doi.org/10.1016/j.diamond.2018.12.024 - Javed, K., Krumme, A., Viirsalu, M., Krasnou, I., Plamus, T., Vassiljeva, V., Tarasova, E., Savest, N., Mere, A., Mikli, V., Danilson, M., Kaljuvee, T. et al. A method for producing conductive graphene biopolymer nanofibrous fabrics by exploitation of an ionic liquid dispersant in electrospinning // Carbon (2018) vol. 140, p. 148-156 : ill.
https://doi.org/10.1016/j.carbon.2018.08.034 https://novaator.err.ee/873101/ttu-teadlaste-arendatud-tselluloosikangaga-saab-vajadusel-laadida-telefoni - Mandati, S., Dey, S. R., Joshi, S. V., Sarada, B. V. Two-dimensional CuIn1-xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications // Solar energy (2019) Vol. 181, p. 396−404.
https://doi.org/10.1016/j.solener.2019.02.022 - Spiridonova, J., Katerski, A., Danilson, M., Kritševskaja, M., Krunks, M., Oja Acik, I. Effect of the titanium isopropoxide : acetylacetone molar ratio on the photocatalytic activity of TiO2 thin films // Molecules (2019) vol. 24, 23, art. 4326, 14 p. : ill.
https://doi.org/10.3390/molecules24234326 - Eensalu, J., Katerski, A., Kärber, E., Oja Acik, I., Krunks, M. et al. Semitransparent Sb2S3 thin film solar cells by ultrasonic spray pyrolysis for use in solar windows // Beilstein journal of nanotechnology (2019) vol. 10, p. 2396−2409.
https://doi.org/10.3762/bjnano.10.230 - Eensalu, J.S., Katerski, A., Kärber, E., Oja Acik, I., Mere, A., Krunks, M. Uniform Sb2S3 optical coatings by chemical spray method // Beilstein journal of nanotechnology (2019) Vol. 10, 1, p. 198-210 : ill.
https://doi.org/10.3762/bjnano.10.18 - Tarraste, M., Kübarsepp, J., Juhani, K., Mere, A., Kolnes, M., Viljus, M., Maaten, B. Ferritic chromium steel as binder metal for WC cemented carbides // International journal of refractory metals and hard materials (2018) vol. 73, p. 183-191 : ill.
https://doi.org/10.1016/j.ijrmhm.2018.02.010 - Dündar, I., Kritševskaja, M., Katerski, A. P., Oja Acik, I. TiO2 thin films by ultrasonic spray pyrolysis as photocatalytic material for air purification // Royal Society open science (2019) vol. 6, 2, art. 181578, 12 p. : ill.
https://doi.org/10.1098/rsos.181578 - Spalatu, N., Hiie, J., Kaupmees, R., Volobujeva, O., Krustok, J., Oja Acik, I., Krunks, M. Postdeposition processing of SnS thin films and solar cells : prospective strategy to obtain large, sintered, and doped SnS grains by recrystallization in the presence of a metal halide flux // ACS applied materials & interfaces (2019) vol. 11, 19, p. 17539–17554 : ill.
https://doi.org/10.1021/acsami.9b03213 - Oluwabi, A.T., Acik, I.O., Katerski, A., Mere, A., Krunks, M. Structural and electrical characterisation of high-k ZrO2 thin films deposited by chemical spray pyrolysis method // Thin Solid Films (2018) Vol. 662, p. 129 - 136.
https://doi.org/10.1016/j.tsf.2018.07.035 - Krautmann, R., Spalatu, N., Josepson, R., Nedzinskas, R., Kondrotas, R., Gržibovskis, R., Vembris, A., Krunks, M., Oja Acik, I. Low processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defects // Solar energy materials and solar cells (2023) vol. 251, art. 112139, 9 p. : ill.
https://doi.org/10.1016/j.solmat.2022.112139 - Gopi, S. V., Spalatu, N., Basnayaka, M., Krautmann, R., Katerski, A., Josepson, R., Grzibovskis, R., Vembris, A., Krunks, M., Oja Acik, I. Post deposition annealing effect on properties of CdS films and its impact on CdS/Sb2Se3 solar cells performance // Frontiers in Energy Research (2023) vol. 11, art. 1162576, 12 p.
https://doi.org/10.3389/fenrg.2023.1162576 - Koltsov, M., Gopi, S.V., Raadik, T., Krustok, J., Josepson, R., Gržibovskis, R.,Vembris, A., Spalatu, N. Development of Bi2S3 thin film solar cells by close-spaced sublimation and analysis of absorber bulk defects via in-depth photoluminescence analysis // Solar energy materials and solar cells (2023) vol. 254, art. 112292.
https://doi.org/10.1016/j.solmat.2023.112292 - Eensalu, J. S., Mandati, S., Don, C. H., Finch, H., Dhanak, V. R., Major, J. D., Grzibovskis, R., Tamm, A., Ritslaid, P., Josepson, R., Spalatu, N., Krunks, M., Oja Acik, I., et al. Sb2S3 thin-film solar cells fabricated from an antimony ethyl xanthate based precursor in air // ACS applied materials & interfaces (2023) vol. 15, 36, p. 42622-42636.
https://doi.org/10.1021/acsami.3c08547 - Alaydaroos, A. H., Sydorenko, J., Palanisamy, S., Chiesa, M., Al Hajri, E. Efficient photoelectrocatalytic degradation of amoxicillin using nano-TiO2 photoanode thin films : a comparative study with photocatalytic and electrocatalytic methods // Chemosphere (2023) vol. 339, art. 139629.
https://doi.org/10.1016/j.chemosphere.2023.139629 - Dimri, M.C., Khanduri, H., Agarwal, P., Garg, V., Mere, A., Stern R. Magnetic studies on spinel ferrite nanoparticles and bulk samples synthesized by citrate combustion route // DAE Solid State Physics symposium 2019, 18–22 December 2019, Jodhpur, India. Melville : AIP, 2020. art. 030517. (AIP conference proceedings ; 2265).
https://doi.org/10.1063/5.0016823 - Ganchev, M., Spasova, S., Raadik, T., Mere, A., Altosaar, M., Mellikov, E. Rapid thermal processing of Kesterite thin films // Coatings (2023) vol. 13, 8, art. 1449.
https://doi.org/10.3390/coatings13081449 - Oluwabi, A.T., Spalatu, N., Maticiuc, N., Katerski, A., Mere, A., Krunks, M., Oja Acik, I. Combinative solution processing and Li doping approach to develop p-type NiO thin films with enchanced electrical properties // Frontiers in materials (2023) vol. 10, 12 p. : ill.
https://doi.org/10.3389/fmats.2023.1060420 - Spalatu, N., Krautmann, R., Katerski, A., Kärber, E., Josepson, R., Hiie, J., Oja Acik, I., Krunks, M. Corrigendum to “Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: Interrelation between grain structure, interface intermixing and solar cell performance” [Solar Energy Mater. Solar Cell. 225 (2021) 1–13 111045](S092702482100088X)(10.1016/j.solmat.2021.111045) // Solar Energy Materials and Solar Cells (2021) Vol. 228, Art. 111098.
https://doi.org/10.1016/j.solmat.2021.111098 - Montero, J., Welearegay, T., Thyr, J., Stopfel, H., Dedova, T., Oja Acik, Österlund, L. Erratum: Copper-zinc oxide heterojunction catalysts exhibiting enhanced photocatalytic activity prepared by a hybrid deposition method (RSC Advances (2021) 11 (10224–10234) DOI: 10.1039/D1RA00691F) // RSC Advances (2021) Vol. 11, 22, p. 13635.
https://doi.org/10.1039/d1ra90096j