A theoretical study of electron drift mobility anisotropy in n-type 4H- and 6H-SiCVelmre, Enn; Udal, AndresProceedings of the International Conference on Silicon Carbide and Related Materials - 1999 (ICSCRM'99) : Research Triangle Park, North-Carolina, USA, Oct. 10-15, 1999. Vol. 12000 / p. 725-728

Abrasive wear resistance of HVOF sprayed and PTA-welded hardmetal hard phase reinforced metal-matrix based coatingsTarbe, Riho; Kulu, Priit; Zikin, Arkadi; Surženkov, AndreiEngineering materials & tribology XXII2014 / p. 3-7

Abrasive wear resistance of recycled hardmetal reinforced thick coatingKulu, Priit; Tarbe, Riho; Zikin, Arkadi; Sarjas, Heikki; Surženkov, AndreiEngineering materials and tribology2013 / p. 185-190

Air-to-water heat pump monitoring in the cold climate regionKõiv, Teet-Andrus; Ling, Mariin; Tennokese, KasparInnovative Solutions in the Field of Engineering Sciences : selected, peer reviewed papers from the 2014 International Conference on Applied Mechanics and Mechanical Automation (AMMA 2014), May 20-21, 2014, Macao, China2014 / p. 599-603 : ill

Analysis of barrier inhomogeneities of P-type Al/4H-SiC Schottky barrier diodesZiko, Mehadi Hasan; Koel, Ants; Rang, Toomas; Toompuu, JanaSilicon Carbide and Related Materials 2019 : 18th International Conference on Silicon Carbide and Related Materials 2019 (ICSCRM 2019), Kyoto, Japan, September 29 - October 4, 20192020 / p. 960-972 https://doi.org/10.4028/www.scientific.net/MSF.1004.960 Conference proceedings at Scopus Article at Scopus

Application of HOHWM for vibration analysis of nanobeamsKirs, Maarjus; Eerme, Martin; Bassir, David; Tungel, ErnstModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 230-235 https://www.scientific.net/KEM.799.230 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.230 Conference proceeding at Scopus Article at Scopus

Average residual stresses in hard Physical Vapor Deposited (PVD) coatingsLille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Mikli, Valdek; Adoberg, Eron; Vagiström, Heinar; Kübarsepp, Jakob; Peetsalu, PriiduModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 20-25 : ill https://doi.org/10.4028/www.scientific.net/KEM.799.20 https://www.scientific.net/KEM.799.20 https://www.ester.ee/record=b5235278*est Conference proceeding at Scopus Article at Scopus

Change in the parameters of electron-irradiated 4H-SIC schottky diodes as a function of the time during low-temperature isothermal annealingKorolkov, Oleg; Kozlovski, Vitali V.; Lebedev, Alexander A.; Toompuu, Jana; Sleptsuk, Natalja; Rang, ToomasSilicon Carbide and Related Materials 2018 : 12th European Conference on Silicon Carbide and Related Materials (ECSCRM 2018) : Selected, peer reviewed papers from the European Conference on Silicon Carbide and Related Materials (ECSCRM 2018), September 2-6, 2018,Birmingham, UK2019 / p. 734-737 https://doi.org/10.4028/www.scientific.net/MSF.963.734 Conference proceeding at Scopus Article at Scopus

Changes in surface morphology, deflection and wear of microcrystalline diamond film observed during sliding tests against Si3N4 ballsBogatov, Andrei; Traksmaa, Rainer; Podgurski, VitaliEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 145-151 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.145

Characterization of mechanically milled cermet powders produced by disintegrator technologyKäerdi, Helmo; Goljandin, Dmitri; Kulu, Priit; Sarjas, Heikki; Mikli, ValdekEngineering materials and tribology2013 / p. 148-153

Chemical bath deposition of SnS thin films from the solutions with different concentrations of tin and sulphurSafonova, Maria; Mellikov, Enn; Mikli, Valdek; Kerm, Karin; Naidu, Revathi; Volobujeva, OlgaInter Academia 2014 - Global Research and Education2015 / p. 183-186 : ill http://dx.doi.org/10.4028/www.scientific.net/AMR.1117.183

Comparative analysis of residual stresses determined by various methods in brush-plated hard gold and silver coatingsLille, Harri; Kõo, Jakub; Ryabchikov, Alexander; Reitsnik, Renno; Sergejev, Fjodor; Mikli, ValdekEngineering materials & tribology XXII2014 / p. 8-11

Comparative analysis of two methods for evaluating wear rate of nanocrystalline diamond filmsBogatov, Andrei; Yashin, Maxim; Viljus, Mart; Menezes, Pradeep; Podgurski, VitaliEngineering materials and tribology XXV2017 / p. 345-350 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.721.345

Comparative analysis of wear rates of microcrystalline diamond and diamond-like carbon coatings deposited on WС-Co substratesYashin, Maxim; Bogatov, Andrei; Podgurski, VitaliEngineering materials and tribology XXV2017 / p. 436-440 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.721.436

Comparative investigation of the graphene-on-silicon carbide and CVD graphene as a basis for biosensor applicationSleptšuk, Natalja; Lebedev, Alexander A.; Eliseyev, Ilya; Korolkov, Oleg; Toompuu, Jana; Land, Raul; Mikli, Valdek; Zubov, Alexander; Rang, ToomasModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 185-190 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.185 https://doi.org/10.4028/www.scientific.net/KEM.799.185 Conference proceeding at Scopus Article at Scopus

Comparative study of adhesive wear for CoCr, TiC-NiMo, WC-Co as potential FSW tool materialsKolnes, Mart; Kübarsepp, Jakob; Sergejev, Fjodor; Kolnes, MärtMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 224-228 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.224

Comparative study of plasma cladded Fe-based composite hardfacings with in situ synthesized Cr and Ti carbide reinforcementTkachivskyi, Dmytro; Viljus, Mart; Traksmaa, Rainer; Antonov, Maksim; Surženkov, Andrei; Juhani, Kristjan; Kulu, PriitSolid state phenomena ; 3202021 / p. 83-89 https://doi.org/10.4028/www.scientific.net/SSP.320.83 Article Collection metrics at Scopus Article at Scopus

Comparative study of the VARTM, VAP and MTI vacuum infusion processesAruniit, Aare; Herranen, Henrik; Miller, KristenEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 71-76 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.71

Contact stiffness parameters for finite element modeling of contactSivitski, Alina; Põdra, PriitModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 211-216 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.211 https://doi.org/10.4028/www.scientific.net/KEM.799.211 Conference proceeding at Scopus Article at Scopus

Covering an unknown area with an RFID-enabled robot swarmPuusepp, Andres; Tammet, Tanel; Reilent, EnarMechanical design and power engineering2014 / p. 1157-1162

Critical radius in the effect of transformation toughening of zirconia doped ceramics and cermetsFreidin, Alexander; Filippov, Roman; Hussainova, Irina; Vilchevskaya, ElenaEngineering materials and tribology2013 / p. 68-73

Cyclic loading of TiCN coating by Vickers indentationSaarna, Mart; Lind, Liina; Peetsalu, Priidu; Sergejev, FjodorEngineering materials and tribology XXV2017 / p. 425-429 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.425

Degradation of 600-V 4H-SiC Schottky diodes under irradiation with 0.9 MeV electronsLebedev, Alexander A.; Davidovskaja, Klavdia; Kozlovski, Vitali V.; Korolkov, Oleg; Sleptšuk, Natalja; Toompuu, JanaSilicon Carbide and Related Materials 2016 : selected, peer reviewed papers from the 11th European Conference on Silicon Carbide and Related Materials 2016 (ECSCRM 2016), September 25-29, 2016, Halkidiki, Greece2017 / p. 447-450 : ill https://doi.org/10.4028/www.scientific.net/MSF.897.447

Densification and microstructure development in zirconia toughened hardmetalsVoltšihhin, Nikolai; Hussainova, Irina; Cura, M. Erkin; Hannula, Simo-Pekka; Traksmaa, RainerEngineering materials and tribology2013 / p. 50-55 : ill

Dependance of wear of Cu-Cr-S alloy on hardness and electrical conductivity in sliding electrical contactKommel, Lembit; Baroninš, JanisMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 229-233 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.229

Dependence of the carrier removal rate in 4H-SIC PN structures on irradiation temperatureLebedev, Alexander A.; Davydovskaya, Klavdya S.; Kozlovski, Vitali V.; Korolkov, Oleg; Sleptsuk, Natalja; Toompuu, JanaSilicon Carbide and Related Materials 2018 : 12th European Conference on Silicon Carbide and Related Materials (ECSCRM 2018) : Selected, peer reviewed papers from the European Conference on Silicon Carbide and Related Materials (ECSCRM 2018), September 2-6, 2018,Birmingham, UK2019 / p. 730-733 https://doi.org/10.4028/www.scientific.net/MSF.963.730 Conference proceeding at Scopus Article at Scopus

Design and manufacturing of variable angle tow laminateHaavajõe, Anti; Mikola, Madis; Pohlak, MeelisEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 59-64 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.59

Determination of resistance to wear of particulate compositeAruniit, Aare; Antonov, Maksim; Kers, Jaan; Krumme, AndresEngineering materials & tribology XXII2014 / p. 188-191

Development of the method for calculation of plates to ensure optimization of hull thicknessGornostajev, Dmitri; Arjassov, Gennadi; Žigailov, SergeiMechatronic systems and materials VI2015 / p. 796-801 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.220-221.796

Diffusion in SC Ni-base superalloys under viscoplastic deformationKommel, Lembit; Straumal, B.Diffusion in Solids and Liquids V2010 / p. 1340-1345

Diffusion welded Al contacts to p-type SiCKorolkov, Oleg; Rang, Toomas; Syrkin, A.; Dmitriev, V.Silicon Carbide and Related Materials 2002 : ECSCRM20022003 / p. 697-700

Diffusion welding techniques for power SiC Schottky packagingKorolkov, Oleg; Rang, Toomas; Syrkin, A.; Dmitriev, V.Silicon carbide and related materials 20052006 / p. 919-922

Digital Object Memory integration into indirect surface roughness measurement in turningAruväli, Tanel; Otto, Tauno4th Mechanical and Manufacturing Engineering : selected, peer reviewed papers from the 4th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), December 17-18, 2013, Bangi-Putrajaya, Malaysia2014 / p. 764-768

Direct CVD growth of multi-layered graphene closed shells around alumina nanofibersIvanov, Roman; Mikli, Valdek; Kübarsepp, Jakob; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 77-80 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.77

Effect of atomic oxygen irradiation on the structural and tribological properties of the MoS2/Al2O3/PI compositesZhao, Gai; Wang, Qihua; Hussainova, Irina; Ding, QingjunEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 239-243 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.239

Effect of basalt reinforcement type and content on the abrasive wear behaviour of polymer compositesAntonov, Maksim; Kers, Jaan; Liibert, Laura; Shuliak, Volodymyr; Smirnov, Anton; Bartolome, Jose F.Engineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 181-188 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.181

Effect of grain growth inhibitors VC/Cr3C2 on WC-ZrO2-Ni composite mechanicsYung, Der-Liang; Dong, Minjie; Hussainova, IrinaEngineering materials & tribology XXII2014 / p. 106-109

Effect of new superhard phases formation on properties of composite processed by SHSKommel, Lembit; Tamm, Toomas; Metsvahi, RaidoEngineering materials and tribology2013 / p. 137-142

Effect of oxidation on sliding wear behavior of NiCrSiB-TiB2 plasma sprayed coatingsUmanskii, A.; Hussainova, Irina; Storoženko, M.; Terentyev, O.; Antonov, MaksimEngineering materials & tribology XXII2014 / p. 16-19

Effect of sintering method on surface fatigue of carbide compositesPetrov, Mihhail; Kübarsepp, Jakob; Sergejev, Fjodor; Viljus, Mart; Tarraste, MarekEngineering materials and tribology XXV2017 / p. 368-372 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.721.368

Effect of thermal spraying method on the microstructure and wear behaviour of FeNiCrBSiC-CrB2 coatingUmanskyi, O.; Storozhenko, M.; Antonov, Maksim; Terentyev, O.; Koval, O.; Goljandin, DmitriModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 37-42 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.37 https://doi.org/10.4028/www.scientific.net/KEM.799.37 Conference proceeding at Scopus Article at Scopus

Effect of WC grain size and content on erosive wear of manual arc welded hardfacings with low-carbon ferritic-pearlitic steel or stainless steel matrixKatinas, Egidijus; Antonov, Maksim; Jankauskas, Vytenis; Skirkus, RemigijusEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 213-218 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.213

Effects of the inclusion of armchair graphene nanoribbons on the electrical conduction properties of NN-heterojunction 4H-6H/SiC diodesRashid, Muhammad Haroon; Koel, Ants; Rang, ToomasAdvanced Materials and Processing Technologies : 2nd International Conference on Sensors, Materials and Manufacturing (ICSMM 2018, November 19-21, 2018, Taiwan); International Conference on Materials Sciences and Nanomaterials (ICMSN 2018, July 11-13, 2018, United Kingdom) and the 2nd International Conference on Materials and Intelligent Manufacturing (ICMIM 2018, August 24-26, 2018, Japan)2019 / p. 29–35 : ill https://doi.org/10.4028/www.scientific.net/MSF.962.29 Conference proceeding at Scopus Article at Scopus

Electrochemical behaviour of TiCN and TiAlN gradient coatings prepared by lateral rotating cathode arc PVD technologyBaroninš, Janis; Podgurski, Vitali; Antonov, Maksim; Bereznev, Sergei; Hussainova, IrinaEngineering materials and tribology XXV2017 / p. 414-418 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.414

Embedded electronics influence on the strength of carbon fiber laminateHerranen, Henrik; Kers, Jaan; Preden, Jürgo-Sören; Talalaev, Robert; Eerme, Martin; Majak, Jüri; Lend, Henri; Allikas, GeorgAdvances in applied materials and electronics engineering III2014 / p. 239-243

Engineering materials and tribology2013

Engineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 http://dx.doi.org/10.4028/www.scientific.net/KEM.674

Enhancement of hydrogen storage in metals by using a new technique in Severe Plastic DeformationsOmranpour Shahreza, Babak; Kommel, Lembit; Sanchez, E. GarciaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 173-178 : ill https://doi.org/10.4028/www.scientific.net/KEM.799.173 https://www.scientific.net/KEM.799.173 https://www.ester.ee/record=b5235278*est Conference proceeding at Scopus Article at Scopus

Erosion wear of reactive sintered WC-TiC-Co cermetsTarraste, Marek; Juhani, Kristjan; Pirso, Jüri; Viljus, MartEngineering materials & tribology XXII2014 / p. 63-66

Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrateLille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, PriiduMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 212-218 http://dx.doi.org/10.4028/www.scientific.net/SSP.267.212

Evaluation of residual stresses in PVD coatings by means of the curvature method of plateLille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, LiinaEngineering materials and tribology XXV2017 / p. 404-408 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.404

Evaluation of wear rate of nanocrystalline diamond films esing Abbott curveBogatov, Andrei; Podgurski, VitaliMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 185-189 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.185

Evolution of TiN coating surface roughness during physical vapor deposition on high speed steel substrateKupchenko, Leonid; Tali, Rauno; Adoberg, Eron; Mikli, Valdek; Podgurski, VitaliEngineering materials & tribology XXII2014 / p. 67-70

Fabrication of NiO/NiAl2O4 nanofibers by combustion methodAghayan, Marina; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 31-34 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.31

Formation of large area Al contacts on 6H- and 4H-SiC substratesKorolkov, Oleg; Rang, ToomasSilicon Carbide and Related Materials : ECSCRM2000 : proceedings of the 3rd European Conference on Silicon Carbide and Related Materials : Kloster Banz, Germany, September 20002001 / p. 603-606 : ill

Fracture description of AZ61 Mg-Al2O3 materials studied by "in situ tensile test in SEM"Besterci, Michal; Nagy, Štefan; Huang,  Song-Jeng; Velgosova, Oksana; Sülleiova, Katarina; Kulu, PriitEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 165-172 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.165

Graphene covered alumina nanofibers as toughening agent in alumina ceramicsHussainova, Irina; Drozdova, Maria; Aghayan, Marina; Ivanov, Roman; Perez-Coll, Domingo13th International Ceramics Congress. Part B2014 / p. 49-53

Heat conductive plates from recycled niobium slagKulu, Priit; Goljandin, Dmitri; Viljus, Mart; Traksmaa, Rainer; Gregor, AndreSolid State Phenomena ; 3202021 / p. 169-175 https://doi.org/10.4028/www.scientific.net/SSP.320.169 Article Collection metrics at Scopus Article at Scopus

Heat treatment of ultrafine grained AA6061 consolidation by equal channel angular pressingPramono, Agus; Kollo, Lauri; Kallip, Kaspar; Veinthal, Renno; Gomon, Jaana-KateriinaInstrumentation and measurement systems2015 / p. 252-256 http://dx.doi.org/10.4028/www.scientific.net/AMM.771.252

High energy milling of WС-FeСr cemented carbideTarraste, Marek; Kübarsepp, Jakob; Juhani, Kristjan; Kolnes, Märt; Viljus, MartModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 136-141 : ill https://www.scientific.net/KEM.799.136 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.136 Conference proceeding at Scopus Article at Scopus

High temperature cyclic impact/abrasion testing of boiler steelsPriss, Jelena; Klevtsov, Ivan; Dedov, Andrei; Antonov, Maksim; Rojacz, Harald; Badisch, EwaldEngineering materials & tribology XXII2014 / p. 289-292

High-efficiency internal combustion engine used in the unmanned aircraftTiimus, Kristjan; Murumäe, Mikk; Väljaots, Eero; Tamre, MartMechatronic systems and materials VI2015 / p. 928-933 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.220-221.928

High-voltage diffusion‐welded stacks on the basis of SiC Schottky diodesKorolkov, Oleg; Sleptšuk, Natalja; Annus, Paul; Land, Raul; Rang, ToomasSilicon carbide and related materials 2015 (ICSRM 2015) : selected, peer reviewed papers from the 16th International Conference on Silicon Carbide and Related Materials, October 4-9, 2015, Giardini Naxos, Italy2016 / p. 790-794 : ill http://dx.doi.org/10.4028/www.scientific.net/MSF.858.790

Hybrid graphene/alumina nanofibers for electrodonductive zirconiaDrozdova, Maria; Perez-Coll, Domingo; Aghayan, Marina; Ivanov, Roman; Rodriguez, Miguel Angel; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 15-20 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.15

Hybrid syntactic foams of metal - fly ash cenosphere - clayShishkin, Andrei; Mironovs, Viktors; Zemchenkov, Vjacheslav; Antonov, Maksim; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 35-40 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.35

Impact and sliding wear properties of single layer, multilayer and nanocomposite physical vapour deposited (PVD) coatings on the plasma nitrided low-alloy 42CrMo4 steelSurženkov, Andrei; Adoberg, Eron; Põdra, Priit; Sergejev, Fjodor; Mere, Arvo; Viljus, Mart; Mikli, Valdek; Antonov, Maksim; Kulu, PriitEngineering materials and tribology2013 / p. 223-228 : ill

Influence of cellulose stearate (CS) content on thermal and rheological properties of poly(lactic acid)/CS compositesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Viikna, AntiBaltic Polymer Symposium2013 / p. 99-104

Influence of Cr, Ti and Zr oxides formation on high temperature sliding of NiAl-based plasma spray coatingsPoliarus, Olena; Umanskyi, Oleksandr; Ukrainets, Maksym; Kostenko, Oleksii; Antonov, Maksim; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 308-312 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.308

Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti)N-G and nACo® coatingsSurženkov, Andrei; Adoberg, Eron; Antonov, Maksim; Sergejev, Fjodor; Mikli, Valdek; Viljus, Mart; Latokartano, Jyrki; Kulu, PriitEngineering materials & tribology XXII2014 / p. 28-31

Influence of pressurized sintering on the performance of TiC-based cermetsKübarsepp, Jakob; Klaasen, Heinrich; Tsinjan, Aleksei; Juhani, Kristjan; Kollo, Lauri; Viljus, MartEngineering materials and tribology2013 / p. 56-61

Influence of surface morphology on the tribological behavior of diamond-like carbon coatingPodgurski, Vitali; Bogatov, Andrei; Freund, Martin; Kulu, PriitEngineering materials and tribology2013 / p. 83-91 : ill

Interaction of point defects with impurities in the Si-SiO2 system and its influence on the properties of the interfaceKropman, Daniel; Mellikov, Enn; Lott, Kalju; Kärner, T.; Heinmaa, I.Getterring and defect engineering in semiconductor technology XIII : CADEST 2009 : proceedings of the XIIIth International Autumn Meeting, Döllnsee-Schorfheide, north of Berlin, Germany, September 26 - October 02, 20092010 / p. 145-148 : ill

Investigation of additional states in the silicon carbide surface after diffusion weldingMizsei, Janos; Korolkov, Oleg; Sleptšuk, Natalja; Toompuu, Jana; Rang, ToomasICSCRM2011 : Cleveland Ohio, USA, September 11-16, 2011 : abstracts2011 / p. 356 : ill

Investigation of charge carrier lifetime temperature-dependence in 4H-SiC diodesVelmre, Enn; Udal, AndresSilicon carbide and related materials 20062007 / p. 375-378 https://www.researchgate.net/publication/250348987_Investigation_of_Charge_Carrier_Lifetime_Temperature-Dependence_in_4H-SiC_Diodes

Investigation of Devulcanised Crumb Rubber Milling and Deagglomeration in Disintegrator SystemLapkovskis, Vjaceslavs; Mironovs, Viktors; Irtiseva, Kristine; Goljandin, Dmitri; Shishkin, AndreiKey engineering materials2019 / p. 216−220 https://doi.org/10.4028/www.scientific.net/KEM.800.216 Conference proceeding at Scopus Article at Scopus

Investigation of morphology changes on nanocrystalline diamond film surfaces during reciprocating sliding against Si3N4 ballsBogatov, Andrei; Podgurski, Vitali; Raadik, Taavi; Kamjula, A. R.; Hantschel, Thomas; Tsigkourakos, M.; Kulu, PriitEngineering materials & tribology XXII2014 / p. 126-129

Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatingsLille, Harri; Kõo, Jakub; Rjabtšikov, Aleksander; Reitsnik, Renno; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorEngineering materials and tribology2013 / p. 125-130 : ill

Investigation of residual stresses in flame sprayed Ni-based wear resistant coatings by the hole-drilling and X-ray methodsRyabchikov, Alexander; Lille, Harri; Reitsnik, Renno; Toropov, Stanislav; Surženkov, Andrei; Kulu, PriitInternational Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on Residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany2014 / p. 144-149

Investigation of steam turbine blades damage and reliability in a power plantMolodtsov, Artjom; Dedov, Andrei; Klevtsov, Ivan; Kommel, Lembit; Lausmaa, Toomas; Mikli, ValdekModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 89-94 : ill https://www.scientific.net/KEM.799.89 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.89 Conference proceeding at Scopus Article at Scopus

Investigation of subcontact layers in SiC after diffusion weldingKorolkov, Oleg; Kuznetsova, Natalja; Sitnikova, A.; Viljus, Mart; Rang, ToomasSilicon carbide and related materials 20072009 / p. 647-650

Investigation of tribological characteristics of polymers used in medicineAndriushchenko, Ekaterina; Semenova, Vlada; Yuan, PanNew Materials and Technologies in Mechanical Engineering : International Scientific Conference "New Materials and Technologies in Mechanical Engineering" (NMTME 2019)2019 / p. 656-661 https://doi.org/10.4028/www.scientific.net/KEM.822.656

Measurement and analysis of human lower limbs movement parameters during walkingŽigailov, Sergei; Kuznetcov, Artem; Musalimov, Victor; Arjassov, GennadiMechatronic systems and materials VI2015 / p. 538-543 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.220-221.538

Measurement of charge carrier lifetime temperature-dependence in 4H-SiC power diodesUdal, Andres; Velmre, EnnProceedings of the International Conference on Silicon Carbide and Related Materials - 1999 (ICSCRM'99) : Research Triangle Park, North-Carolina, USA, Oct. 10-15, 1999. Vol. 12000 / p. 781-784 https://www.scientific.net/MSF.338-342.781

Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plateLille, Harri; Kõo, Jakub; Valgur, Jaak; Ryabchikov, Alexander; Reitsnik, Renno; Veinthal, RennoInternational Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on Residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany2014 / p. 101-106

Mechanical characterization and wear performance of WC–ZrO2–Ni cermets produced by hot isostatic pressingHussainova, Irina; Smirnov, Anton; Antonov, MaksimAdvances in Key Engineering Materials2011 / p. 344-348 : ill

Metals microstructure improving under hard cyclic viscoplastic deformationKommel, LembitNanomaterials by severe plastic deformation IV. Part 12008 / p. 361-366 : ill

Metrological overview for coordinate measuring machinesDhoska, Klodian; Kübarsepp, Toomas; Dorri, Altin; Pramono, AgusInstrumentation and measurement systems2015 / p. 195-199 : ill http://dx.doi.org/10.4028/www.scientific.net/AMM.771.195

Microstructure and properties characterization of polycrystalline Ni-Fe-Cr-based
superalloy EP-718E after electric upsettingKommel, LembitEngineering materials and tribology XXV2017 / p. 467-472 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.467

Microstructure formation and performance of reactive sintered titanium oxycarbide base ceramic-ceramic compositesJuhani, Kristjan; Kübarsepp, Jakob; Tarraste, Marek; Pirso, Jüri; Viljus, MartModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 131-135 : ill https://www.scientific.net/KEM.799.131 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.131 Conference proceeding at Scopus Article at Scopus

Modeling of photon recycling in GaN-devicesVelmre, Enn; Udal, Andres; Klopov, MihhailMaterial Science Forum. 483/4852005 / p. 1039-1042

Modeling of photon recycling in GaN-devicesVelmre, Enn; Udal, Andres; Klopov, MihhailSilicon carbide and related materials 2004 : ECSCRM 2004 : proceedings of the 5th European Conference on Silicon Carbide and Related Materials, August 31-September 4, 2004, Bologna, Italy2005 / p. 1039-1042 : ill

Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewedpapers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799

Modular multi-rotor helicopter platformsTiimus, Kristjan; Tamre, MartMechatronic systems and materials VI2015 / p. 110-115 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.220-221.110

Motion and energy efficiency parameters of the unmanned ground vehicleVäljaots, Eero; Sell, Raivo; Kaeeli, MatiMechatronic systems and materials VI2015 / p. 934-939 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.220-221.934

Nano- and Micro-Scale simulations of Ge/3C-SiC and Ge/4H-SiC NN-heterojunction diodesRashid, Muhammad Haroon; Koel, Ants; Rang, ToomasSilicon Carbide and Related Materials 2019 : 18th International Conference on Silicon Carbide and Related Materials 2019 (ICSCRM 2019), Kyoto, Japan, September 29 - October 4, 20192020 / p. 490-496 https://doi.org/10.4028/www.scientific.net/MSF.1004.490 Conference proceedings at Scopus Article at Scopus

Nano and micro-scale simulations of Si/4H-SiC and Si/3C-SiC NN-heterojunction diodesRashid, Muhammad Haroon; Koel, Ants; Rang, ToomasSilicon Carbide and Related Materials 2018 : 12thEuropean Conference on Silicon Carbide and Related Materials (ECSCRM 2018) : Selected, peer reviewed papers from the European Conference on Silicon Carbide and Related Materials (ECSCRM 2018), September 2-6, 2018,Birmingham, UK2019 / p. 357–361 https://doi.org/10.4028/www.scientific.net/MSF.963.357 Conference proceeding at Scopus Article at Scopus

New methodology for the antifungal testing of surfactant-free silver metal nanoparticles for applications in green housingKüünal, Siim; Kutti, Sander; Rauwel, Protima; Wragg, David; Hussainova, Irina; Rauwel, ErwanEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 133-138 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.133

Nonlinear comparative optimization for biomaterials wear in artificial implant technologyCasesnoves, FranciscoMaterials science and applied chemistry II : 59th International Scientific Conference of Riga Technical University (RTU), Section of Materials Science and Applied Chemistry - MSAC 20182019 / p. 52-59 https://doi.org/10.4028/www.scientific.net/KEM.800.52 Conference proceeding at Scopus Article at Scopus

Numerical investigation of SiC devices performance considering the incomplecte dopant ionizationVelmre, Enn; Udal, AndresSilicon carbide and related materials 20052006 / p. 1383-1386 https://www.scientific.net/MSF.527-529.1383

Numerical study of current crowding phenomenon in complementary 4H-SiC JBS rectifiersRang, Toomas; Higelin, G.; Kurel, RaidoSilicon Carbide and Related Materials 20032004 / p. 1045-1048 https://www.scientific.net/MSF.457-460.1045

Optimal design of system of cross-beamsArjassov, Gennadi; Žigailov, SergeiMechatronic systems and materials IV2013 / p. 675-680 : ill

Optimization of lift force of mini quadrotor helicopter by changing of gap size between rotorsAleksandrov, Dmitri; Penkov, IgorMechatronic systems and materials IV2013 / p. 226-231 : ill

Optimization of structure of hardmetal reinforced iron-based PM hardfacings for abrasive wear conditionsSimson, Taavi; Kulu, Priit; Surženkov, Andrei; Goljandin, Dmitri; Tarbe, Riho; Tarraste, Marek; Viljus, MartEngineering materials and tribology XXV2017 / p. 351-355 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.351

Prediction of abrasive erosion impact wear of composite hardfacingsKulu, Priit; Casesnoves, Francisco; Simson, Taavi; Tarbe, RihoMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 201-206 http://dx.doi.org/10.4028/www.scientific.net/SSP.267.201

Preliminary analysis of soft magnetic material properties for additive manufacturing of electrical machinesTiismus, Hans; Kallaste, Ants; Rassõlkin, Anton; Vaimann, ToomasModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 270-275 : ill https://www.scientific.net/KEM.799.270 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.270 Conference proceeding at Scopus Article at Scopus

Preparation of cellulose stearate and cellulose acetate stearate in 1-butyl-3-methylimidazolium chlorideTarasova, Elvira; Šumigin, Dmitri; Kudrjašova, Marina; Krumme, AndresBaltic Polymer Symposium2013 / p. 105-110

Processing and mechanical properties of ZrC-ZrO2 compositesVoltšihhin, Nikolai; Hussainova, Irina; Kübarsepp, Jakob; Traksmaa, RainerEngineering materials & tribology XXII2014 / p. 258-261

Processing of ZrC-TiC composites by SPSYung, Der-Liang; Hussainova, Irina; Rodriguez, Miguel Angel; Traksmaa, RainerEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 94-99 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.94

Production of thermal spray Cr3C2-Ni powders by mechanically activated synthesisTkachivskyi, Dmytro; Juhani, Kristjan; Surženkov, Andrei; Kulu, Priit; Viljus, Mart; Traksmaa, Rainer; Jankauskas, Vytenis; Leišys, RimtautasModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 31-36 : ill https://doi.org/10.4028/www.scientific.net/KEM.799.31 https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.31 Conference proceeding at Scopus Article at Scopus

Pultruding of metal powder filled glass fiber reinforced polymer compositesRummo, Henri; Veinthal, Renno; Aruniit, AareEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 48-53 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.48

PVD of N-CuIn3Se5 photoabsorber filmsAdhikari, Nirmal; Bereznev, Sergei; Kois, Julia; Volobujeva, Olga; Raadik, Taavi; Traksmaa, Rainer; Tverjanovich, Andrey; Öpik, AndresMaterials and applications for sensors and transducers2012 / p. 339-342 https://www.researchgate.net/publication/272070024_PVD_OF_n-CuIn3Se5_photoabsorber_films

Quasicrystalline composites by additive manufacturingPrashanth, Konda Gokuldoss; Scudino, SergioApplied Engineering, Materials and Mechanics III : 4th International Conference on Applied Engineering, Materials and Mechanics (4th ICAEMM 2019)2019 / p. 72-76 https://doi.org/10.4028/www.scientific.net/KEM.818.72 Conference proceeding at Scopus Article at Scopus

Raman spectroscopy of multilayered AlCrN coating under high temperature sliding/oxidationBaroninš, Janis; Antonov, Maksim; Bereznev, Sergei; Raadik, Taavi; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 9-14 https://www.scientific.net/KEM.799.9 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.9 Conference proceeding at Scopus Article at Scopus

Reactive sintering of ZrC-TiC compositesYung, Der-Liang; Kollo, Lauri; Hussainova, Irina; Zikin, ArkadiEngineering materials and tribology2013 / p. 20-25 https://www.researchgate.net/publication/234110368_Reactive_Sintering_of_ZrC-TiC_Composites

Recycling of niobium slag by disintegrator millingKulu, Priit; Goljandin, Dmitri; Külaviir, Jaan; Hain, Tiina; Kivisto, MartModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 97-102 : ill https://www.scientific.net/KEM.799.97 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.97 Conference proceeding at Scopus Article at Scopus

Recycling of PA-12 in additive manufacturing and the improvement of its mechanical propertiesMägi, Piret; Krumme, Andres; Pohlak, MeelisEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 9-14 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.9

Relaxation of residual stresses in brush-plated gold and silver coatings on copper and on brass substratesLille, Harri; Kõo, Jakub; Ryabchikov, Alexander; Reitsnik, Renno; Sergejev, Fjodor; Dong, MinjieResidual stresses IX2014 / p. 866-871 : ill

Screen elements made of perforated steel tape and their application for shielding electromagnetic fieldsMironovs, Viktors; Koppel, Tarmo; Lisicins, Mihails; Boiko, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 41-47 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.41

Selected aspects of current challenges in composite product development for automotive and aerospace industryCzichon, Steffen; Köhnke, Jessica; Preisler, Andreas; Herranen, HenrikComposite materials and structures in aerospace engineering2016 / p. 51-63 http://dx.doi.org/10.4028/www.scientific.net/AMM.828.51

Selective laser melting of Ti/cBN compositeMinasyan, Tatevik; Liu, Le; Aydinyan, Sofiya; Antonov, Maksim; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 257-262 : ill https://www.scientific.net/KEM.799.257 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.257 Conference proceeding at Scopus Article at Scopus

SiC JBS diode symmetrical voltage doubler represented as the diffusion-welded stackKorolkov, Oleg; Land, Raul; Toompuu, Jana; Sleptšuk, Natalja; Rang, ToomasSilicon carbide and related materials 2017 : ICSCRM 2017 : selected, peer reviewed papers from the 2017 International Conference on Silicon Carbide and related materials, September 17-22, 2017, Washington, DC, USA2018 / p. 862–865 : ill https://doi.org/10.4028/www.scientific.net/MSF.924.862 Conference Proceedings at Scopus Article at Scopus

SIC schottky diode rectifier bridge represented as the diffusion-welded stackKorolkov, Oleg; Kozlovski, Vitali V.; Lebedev, Alexander A.; Land, Raul; Sleptšuk, Natalja; Toompuu, Jana; Rang, ToomasSilicon Carbide and Related Materials 2016 : selected, peer reviewed papers from the 11th European Conference on Silicon Carbide and Related Materials 2016 (ECSCRM 2016), September 25-29, 2016, Halkidiki, Greece2017 / p. 697-700 : ill https://doi.org/10.4028/www.scientific.net/MSF.897.697

Simulation of deep energy traps to explain the VAC temperature dependence anomaly of diffusion welded Schottky contactsKoel, Ants; Rang, Toomas; Rang, GalinaICSCRM2011 : Cleveland Ohio, USA, September 11-16, 2011 : abstracts2011 / p. 340 : ill

Simulations of heterostructures based on 3C-4H and 6H-4H silicon carbide polytypesRashid, Muhammad Haroon; Koel, Ants; Rang, ToomasSilicon carbide and related materials 2017 : ICSCRM 2017 : selected, peer reviewed papers from the 2017 International Conference on Silicon Carbide and related materials, September 17-22, 2017, Washington, DC, USA2018 / p. 302-305 : ill https://doi.org/10.4028/www.scientific.net/MSF.924.302 Conference Proceedings at Scopus Article at Scopus

Sliding wear of composite stainless steel hardfacing under room and elevated temperatureSurženkov, Andrei; Baroninš, Janis; Viljus, Mart; Traksmaa, Rainer; Kulu, PriitMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 195-200 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.195

Some comparative properties of diffusion-welded contacts to 6H and 4H silicon carbideKorolkov, Oleg; Rang, ToomasSilicon Carbide and Related Materials 2001 : ICSCRM2001 : proceedings of the International Conference on Silicon Carbide and Related Materials 2001, Tsukuba, Japan, October 28 - November 2, 2001. Part 22002 / p. 941-944 : ill

Structuration of refractory metals tantalum and niobium using modified equal channel angular pressing techniqueOmranpour Shahreza, BabakModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 103-108 : ill https://www.scientific.net/KEM.799.103 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.103 Conference proceeding at Scopus Article at Scopus

Study of devulcanised crumb rubber-peat bio-based composite for environmental applicationsLapkovskis, Vjaceslavs; Mironovs, Viktors; Irtiseva, Kristine; Goljandin, DmitriModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 148-152 : ill https://www.scientific.net/KEM.799.148 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.148 Journal metrics at Scopus Article at Scopus

Study of surface defects in 4H-SiC Schottky diodes using a scanning Kelvin probeMizsei, Janos; Korolkov, Oleg; Toompuu, Jana; Rang, ToomasThe 9th European Conference on Silicon Carbide and Related Materials : abstract book : St. Petersburg Russia, 2-6 September, 20122012 / 2 p. : ill

Study of surface defects in 4H-SiC Schottky diodes using a scanning Kelvin probeMizsei, Janos; Korolkov, Oleg; Toompuu, Jana; Mikli, Valdek; Rang, ToomasSilicon Carbide and Related Materials 2012 : selected peer reviewed papers from the 9th European Conference on Silicon Carbide and Related Materials (ECSCRM 2012), September 2-6, 2012, St. Petersburg, Russian Federation2013 / p. 677-680 : ill

Surface fatigue of Al-metal matrix composites at impact loadingSaarna, Mart; Sergejev, Fjodor; Gomon, Jaana-Kateriina; Kollo, Lauri; Leparoux, MarcEngineering materials and tribology2013 / p. 119-124 : ill

Synthesis of bio-cation-substituted Ca-apatites by precipitationBogdanoviciene, Irma; Tõnsuaadu, Kaia; Traksmaa, Rainer; Kareiva, AivarasInorganic and environmental materials2014 / p. 229-232 : ill

Synthesis of ZrC-TiC blend by novel combination of sol-gel method and carbothermal reductionUmalas, Madis; Reedo, Valter; Lõhmus, Ants; Hussainova, Irina; Juhani, KristjanEngineering materials and tribology2013 / p. 62-67

ZrC based ceramics by high pressure high temperature SPS techniqueAydinyan, Sofiya; Minasyan, Tatevik; Liu, Le; Cygan, Slawomir; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 125-130 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.125 https://doi.org/10.4028/www.scientific.net/KEM.799.125 Conference proceeding at Scopus Article at Scopus

Technological peculiarities of chromium carbide-based iron alloy bonded cermetKolnes, Märt; Kübarsepp, Jakob; Viljus, Mart; Traksmaa, RainerMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 82-86 : ill https://doi.org/10.4028/www.scientific.net/SSP.267.82

The basic parameters of diffusion welded Al Schottky contacts to p- and n-SiCKorolkov, Oleg; Ruut, Jana; Kuznetsova, Natalja; Rang, ToomasSilicon Carbide and Related Materials 20032004 / p. 857-860 https://doi.org/10.4028/www.scientific.net/MSF.457-460.857

The effect of niobium on in situ synthesis of titanium carbide in composite hardfacingsYöyler, Sibel; Surzhenkov, Andrei; Viljus, Mart; Traskmaa, Rainer; Juhani, KristjanMaterials science forum ; 11042023 / p. 55-60 https://doi.org/10.4028/p-A5WzJl

The effect of spark plasma sintering thermal cycle on behaviour of Fe-based hardfacings reinforced with WC and WC-based hardmetalKatinas, Egidijus; Antonov, Maksim; Jankauskas, Vytenis; Tarraste, MarekModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. [3]-8 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.3 https://doi.org/10.4028/www.scientific.net/KEM.799.3 Conference proceeding at Scopus Article at Scopus

The influence of processing parameters on mechanical properties of spark plasma sintered chromium carbide based cermetsJuhani, Kristjan; Pirso, Jüri; Tarraste, Marek; Viljus, Mart; Letunovitš, SergeiMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 162-166 http://dx.doi.org/10.4028/www.scientific.net/SSP.267.162

The preparation of TiC/TiN composites by selective laser meltingLiu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 165-170 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.165 https://doi.org/10.4028/www.scientific.net/KEM.799.165 Conference proceeding at Scopus Article at Scopus

The rolling contact fatigue of PVD coated spur gearsMichalczewski, Remigiusz; Piekoszewski, Witold; Szczerek, Marian; Tuszynski, Waldemar; Antonov, MaksimEngineering materials and tribology2013 / p. 77-82

Thermal and kinetic characteristics of some oil shale samplesKaljuvee, Tiit; Kuusik, Rein, keemik; Petkova, VilmaThermophysics and mass transfer in materials science and construction2015 / p. 67-74 http://dx.doi.org/10.4028/www.scientific.net/AMR.1126.67

Thermopower measurements in 4H-SiC and theoretical calculations considering the phonon drag effectGrivickas, V.; Stölzer, M.; Velmre, Enn; Udal, Andres; Grivickas, P.; Syväjärvi, M.; Yakimova, R.; Bikbajevas, V.Silicon Carbide and Related Materials : ECSCRM2000 : proceedings of the 3rd European Conference on Silicon Carbide and Related Materials : Kloster Banz, Germany, September 20002001 / p. 491-494 : ill

Three-body abrasive wear of reactive sintered WC-Co hardmetals with grain growth inhibitorsJuhani, Kristjan; Pirso, Jüri; Tarraste, Marek; Viljus, Mart; Suurkivi, TaaviEngineering materials & tribology XXII2014 / p. 277-282

3D alumina-graphene hybrid nanofibers as a binder‐free cathode for rechargeable Li‐S batteriesTaleb, Masoud; Ivanov, Roman; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 191-196 : ill https://www.scientific.net/KEM.799.191 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.191 Conference proceeding at Scopus Article at Scopus

3D printing of plain and gradient cermets with efficient use of raw materialsAntonov, Maksim; Ivanov, Roman; Holovenko, Yaroslav; Goljandin, Dmitri; Rahmani Ahranjani, Ramin; Kollo, Lauri; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 239-245 : ill https://doi.org/10.4028/www.scientific.net/KEM.799.239 https://www.scientific.net/KEM.799.239 https://www.ester.ee/record=b5235278*est Conference proceeding at Scopus Article at Scopus

Tribological behavior at dry sliding by electric current of Cu-Cr-S alloy after equal channel angular pressingKommel, LembitEngineering materials and tribology XXV2017 / p. 430-435 http://dx.doi.org/10.4028/www.scientific.net/KEM.721.430

Tribological parameters of copper-alumina compositeHvizdoš, Pavol; Kulu, Priit; Besterci, MichalEngineering materials and tribology2013 / p. 191-196 https://www.researchgate.net/publication/271863555_Tribological_Parameters_of_Copper-Alumina_Composite

UFG microstructure processing by ECAP from double electron-beam melted rare metalKommel, LembitNanomaterials by severe plastic deformation IV. Part 12008 / p. 349-354 : ill

Understanding and control of stress at Si-SiO2 interfaceKropman, Daniel; Seeman, Viktor; Medvids, Arturs; Onufrijevs, Pavels; Vitusevich, Svetlana; Mikli, ValdekKey engineering materials2020 / p. 291−296 https://doi.org/10.4028/www.scientific.net/KEM.850.291 Journal metrics at Scopus Article at Scopus

Unmanned ground vehicle energy efficiency validation in territory surveillance missionVäljaots, Eero; Sell, Raivo; Rimasauskas, MariusMechatronic Systems and Materials VII2016 / p. 164-170 http://dx.doi.org/10.4028/www.scientific.net/SSP.251.164

Unmanned ground vehicle SysML navigation model conducted by energy efficiencyVäljaots, Eero; Sell, RaivoAdvances in applied materials and electronics engineering III2014 / p. 443-447

Use of selective laser melting for manufacturing the porous stack of a thermoacoustic engineAuriemma, Fabio; Holovenko, YaroslavModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 246-251 : ill https://www.scientific.net/KEM.799.246 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.246 Conference proceeding at Scopus Article at Scopus

Wear behavior of recycled hard particle reinforced NiCrBSi hardfacings deposited by plasma transferred arc (PTA) processZikin, Arkadi; Hussainova, Irina; Katsich, Christian; Kulu, Priit; Goljandin, DmitriEngineering materials and tribology2013 / p. 179-184 https://www.researchgate.net/publication/236332219_Wear_Behaviour_of_Recycled_Hard_Particle_Reinforced_NiCrBSi_Hardfacings_Deposited_by_Plasma_Transferred_Arc_PTA_Process

Wear rate of nanocrystalline diamond coating under high temperature sliding conditionsYashin, Maxim; Baroninš, Janis; Menezes, Pradeep; Viljus, Mart; Raadik, Taavi; Bogatov, Andrei; Antonov, Maksim; Podgurski, VitaliMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 219-223 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.219