Angularity of the disintegrated ground hardmetal powder particlesMikli, Valdek; Kulu, Priit; Käerdi, Helmo; Besterci, MichalMedžiagotyra = Materials science2002 / 4, p. 430-433 : ill

Brazing of cermets with steel using amorphous filler metalsLaansoo, Andres; Kübarsepp, Jakob; Surženkov, GennadiMedžiagotyra = Materials science2002 / 4, p. 451-454

Characterization of metallic powders produced by mechanical millingMikli, Valdek; Kulu, Priit; Zimakov, Sergei; Käerdi, HelmoMedžiagotyra = Materials science1999 / 2, p. 19-21: ill

Characterization of TiC-FeCrMn cermets produced by powder metallurgy methodKolnes, Märt; Kübarsepp, Jakob; Kollo, Lauri; Viljus, MartMedžiagotyra = Materials science2015 / p. 353-357 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7364

Composite powders for thermal sprayKulu, Priit; Zimakov, Sergei; Arensburger, DaniilMedžiagotyra = Materials science1999 / p. 22-26 : ill

Corrosion resistance of iron-alloys bonded cermets under acid conditionsKübarsepp, Jakob; Baranovskaja, Irina; Idla, Katrin; Kallast, VambolaMedžiagotyra = Materials science1999 / 2, p. 15-18

Development of Young's modulus of illitic clay during heating up to 1100 °CHulan, Tomaš; Trnik, Anton; Štubna, Igor; Bačik, Peter; Kaljuvee, Tiit; Vozar, LiborMedžiagotyra = Materials science2015 / p. 429-434 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7152

Erosive wear of TIC-base cermetsKübarsepp, Jakob; Klaasen, Heinrich; Mikli, Valdek; Viljus, MartMedžiagotyra = Materials science2002 / 4, p. 486-488 : ill

High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatingsSurženkov, Andrei; Goljandin, Dmitri; Traksmaa, Rainer; Viljus, Mart; Talviste, Kristofer; Aruniit, Aare; Latokartano, Jyrki; Kulu, PriitMedžiagotyra = Materials science2015 / p. 386-390 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7617

Measurement of geometry of small axisymmetric sheet metal component after formingLend, Henri; Ratas, Kaarin; Peetsalu, PriiduMedžiagotyra = Materials science2015 / p. 473-478 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7384

Metallic powders produced by mechanical methodsTümanok, Aleksei; Kulu, Priit; Goljandin, DmitriMedžiagotyra = Materials science1999 / 2, p. 3-7: ill

Nanocrystalline diamond films deformation observed during sliding tests against Si3N4 balls as a possible cause for ripple formation on wear scars surfaceBogatov, Andrei; Viljus, Mart; Raadik, Taavi; Hantschel, Thomas; Podgurski, VitaliMedžiagotyra = Materials science2015 / p. 349-352 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7232

Novel thermal spray powders for corrosion and wear resistant coatingsKulu, Priit; Zimakov, Sergei; Goljandin, Dmitri; Peetsalu, PriiduMedžiagotyra = Materials science2002 / 4, p. 413-416 : ill

On residual stresses in flame sprayed coatingsLille, Harri; Kõo, Jakub; Kulu, Priit; Pihl, ToomasMedžiagotyra = Materials science1999 / 2, p. 27-29: ill

Reactive sintering of bimodal WC-Co hardmetalsTarraste, Marek; Juhani, Kristjan; Pirso, Jüri; Viljus, MartMedžiagotyra = Materials science2015 / p. 382-385 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7511

Selection criteria for abrasive erosion wear resistant powder coatingsKulu, Priit; Veinthal, RennoMedžiagotyra = Materials science2002 / 4, p. 425-429 : ill

Sliding wear of Cr3C2-Ni base cermetsLetunovitš, Sergei; Viljus, Mart; Pirso, JüriMedžiagotyra = Materials science2002 / 4, p. 477-480 : ill

Solvents measurement and influence on health in the work environment in manufacturingTint, Piia; Reinhold, Karin; Traumann, AdaMedžiagotyra = Materials science2015 / p. 460-465 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7345

The copper structure and properties evolution in zone of severe plastic deformationKommel, Lembit; Kenk, Kalju; Veinthal, RennoMedžiagotyra = Materials science2002 / 4, p. 396-398 : ill

The influence of reactive sintering parameters on the structure and properties of Cr3C2-Ni cermetsViljus, Mart; Letunovitš, Sergei; Traksmaa, Rainer; Pirso, JüriMedžiagotyra = Materials science2002 / 4, p. 473-476 : ill

The influence of sintering temperature of reactive sintered (Ti, Mo)C-Ni cermetsJõeleht, Marek; Pirso, Jüri; Juhani, Kristjan; Viljus, MartMedžiagotyra = Materials science2015 / p. 435-438 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7179

Thermally sprayed WC-Co hardmetal based coatingsZimakov, Sergei; Tarbe, Riho; Kulu, PriitMedžiagotyra = Materials science2002 / 4, p. 409-412 : ill

Wear of different PVD coatings at industrial fine-blanking field testsLind, Liina; Peetsalu, Priidu; Sergejev, FjodorMedžiagotyra = Materials science2015 / p. 343-348 : ill http://dx.doi.org/10.5755/j01.ms.21.3.7249

Wear resistance and toughness of hardmetalsReshetnjak, Heinrich; Kübarsepp, JakobMedžiagotyra = Materials science1999 / 2, p. 69-71: ill

Wear resistance of sintered composite hardfacings under different abrasive wear conditionsSimson, Taavi; Kulu, Priit; Surženkov, Andrei; Tarbe, Riho; Goljandin, Dmitri; Tarraste, Marek; Viljus, Mart; Traksmaa, RainerMedžiagotyra = Materials science2017 / p. 249-253 : ill http://dx.doi.org/10.5755/j01.ms.23.3.17640