Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al compositesKimmari, Eduard; Kommel, LembitProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 399-407 : ill

Boron carbide based composites manufacturing and recycling featuresKommel, Lembit; Kimmari, EduardMaterials science = Medžiagotyra2006 / 1, p. 48-52 : ill

Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfacesPodgurski, Vitali; Adoberg, Eron; Surženkov, Andrei; Kimmari, Eduard; Viljus, Mart; Mikli, Valdek; Hartelt, M.; Wäsche, R.; Šima, M.; Kulu, PriitWear2011 / p. 853-858 : ill https://www.sciencedirect.com/science/article/abs/pii/S0043164811001815

Design of superhard c-BC2N-precipitates in B4C/Al-composites through SHS and heat treatmentKommel, Lembit; Metsvahi, Rainer; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, RainerProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 645-650 : ill

Dry sliding friction of cubic boron nitride based composite synthesized by SHS [Electronic resource]Kimmari, Eduard; Kommel, LembitProceedings of 12th Nordic Symposium in Tribology : NORDTRIB 2006 : Helsingor, Denmark, 7-9 June 20062006 / [CD-ROM]

Effect of attrition milling on grain size and properties of compositesKommel, Lembit; Kimmari, Eduard; Traksmaa, RainerEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 25

Exothermically synthesized B4C-Al composites for dry sliding = Eksotermiliselt sünteesitud B4C-Al komposiidid tööks liugehõõrdumise tingimustesKimmari, Eduard2008 https://www.ester.ee/record=b2413238*est

Formation of the nanomeasures refractory compounds in the B4C based composites and their influence on wear resistanceKommel, Lembit; Kimmari, EduardAbstracts of the 12th Joint Nordic Conference on Powder Technology : Tampere, Finland, 20032003 / p. 40

Friction and wear changes of boron carbide cermet depending on the structureKommel, Lembit; Kimmari, EduardAbstracts of International Conference Materials Engineering and Tribology2002 / p. 35

Friction and wear changes of boron carbide cermets depending on the structureKommel, Lembit; Kimmari, EduardMaterials science = Medžiagotyra2003 / 1, p. 51-53 : ill

Influence of binder composition and microhardness on wear properties of light weight compositesKommel, Lembit; Traksmaa, Rainer; Kimmari, EduardPowder metallurgy progress2003 / 3, p. 140-145 : ill https://www.researchgate.net/publication/269035885_Influence_of_binder_composition_and_microhardness_on_wear_properties_of_light_weight_composites

Investigations of structure and tribological properties of the lightweight c-BN-based compositesKommel, Lembit; Kimmari, EduardMaterials science = Medžiagotyra2005 / 4, p. 394-397 : ill

Mechanical and structural characterization of multiphase B4C/Al composites synthesized by SHSKimmari, Eduard; Kommel, Lembit15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 33-34

Micromechanical properties and electrical conductivity of Cu and Cu-0.7wt% Cr alloyKommel, Lembit; Pardis, N.; Kimmari, EduardProceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia2014 / p. 354-359 : ill

Microstructure and mechanical characterization of WC-based composites doped by zirconiaHussainova, Irina; Kimmari, Eduard; Kollo, Lauri; Jasiuk, IwonaProceedings of 16th International Conference on Mechanics of Composite Materials : MCM 2010 : May 24-28, Riga, Latvia2010

Multiphase forming in lightweight composites during SHS reactionKommel, Lembit; Kimmari, Eduard17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 19-20 https://www.matsc.ktu.lt/index.php/MatSc/article/view/26220

Multiphase forming in lightweight composites during SHS reactionKommel, Lembit; Kimmari, EduardMaterials science2008 / p. 242-246 : ill https://www.matsc.ktu.lt/index.php/MatSc/article/view/26220

Multiphase microstructure forming purpose in lightweight compositesKommel, Lembit; Kimmari, EduardProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 479-484 : ill

Phases micromechanical properties of Ni-base superalloy measured by nanoindentationKommel, Lembit; Kimmari, Eduard; Viljus, Mart; Traksmaa, Rainer; Volobujeva, Olga; Kommel, IgorMaterials science = Medžiagotyra2012 / p. 28-33 : ill https://matsc.ktu.lt/index.php/MatSc/article/view/1337

Phases properties of SC superalloy measured by nanoindentationKommel, Lembit; Kimmari, Eduard; Viljus, MartMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 22

Preparation of multiphase lightweight c-BN-based compositeJuhani, Kristjan; Kimmari, Eduard; Kommel, LembitInternational Powder Metallurgy Congress & Exhibition : EURO PM2008 : 29th September - 1st October 2008, Mannheim, Germany : proceedings. Vol.12008 / p. 231-236 : ill

Processing and microstructural characterization of WC based cermets doped by ZrO2Kimmari, Eduard; Hussainova, Irina; Smirnov, Anton; Traksmaa, Rainer; Preis, Irina18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 24

Processing and microstructural characterization of WC-based cermets doped by ZrO2Kimmari, Eduard; Hussainova, Irina; Smirnov, Anton; Traksmaa, Rainer; Preis, IrinaEstonian journal of engineering2009 / 4, p. 275-282 : ill

Processing and properties of bulk ultrafine-grained pure niobiumKommel, Lembit; Kimmari, Eduard; Saarna, Mart; Viljus, MartJournal of materials science2013 / p. 4723-4729 : ill

Recycling of light weight B4C based compositesKommel, Lembit; Kimmari, EduardProceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia2004 / p. 199-202 : ill

Residual stresses in TiC-based cermets measured by indentationSergejev, Fjodor; Kimmari, Eduard; Viljus, MartProceedia engineering2011 / p. 2873-2881 : ill

Rippling on wear scar surfaces of nanocrystalline diamond films after reciprocating sliding against ceramic ballsPodgurski, Vitali; Hantschel, Thomas; Bogatov, Andrei; Kimmari, Eduard; Antonov, Maksim; Viljus, Mart; Mikli, Valdek; Raadik, Taavi; Kulu, PriitTribology letters2014 / p. 493-501 : ill

Solid phase's transformations in boron carbide based composites during heat treatmentKommel, Lembit; Kimmari, EduardSolid state phenomena2008 / p. 175-180

Structure and properties of boron nitride based composite produced by SHS methodKommel, Lembit; Kübarsepp, Jakob; Hussainova, Irina; Kimmari, EduardFifth International Conference on Composite Science and Technology : ICCST/5 : 1-3 February 2005, Sharjah, United Arab Emirates : proceedings2005 / p. 461-466 : ill

The formation of structure and change of properties during heat treatment of boron carbide cermetsKommel, Lembit; Veinthal, Renno; Kimmari, EduardAbstracts of International Conference Materials Engineering and Tribology2002 / p. 56

The formation of structure and change of properties during heat treatment of boron carbide compositesKommel, Lembit; Veinthal, Renno; Kimmari, EduardMaterials science = Medžiagotyra2003 / 1, p. 99-101 : ill

The formation of wear resistant properties of boron carbide cermetKommel, Lembit; Kimmari, EduardProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 165-168 : ill

The influence of binder phase status on the wear resistance of boron carbide cermet by frictionKommel, Lembit; Kimmari, Eduard; Peetsalu, PriiduMaterials Engineering & Balttrib 2001 : materials of the X-th International Baltic Conference : September 27-28, Jurmala, Latvia2001 / p. 202-206 : ill

The influence of refractory composition in binder phase on wear properties of boron carbide aluminium compositesKommel, Lembit; Traksmaa, Rainer; Kimmari, EduardAbstracts of 10th Nordic Symposium on Tribology NORDTRIB2002 / p. 97

The influence of refractory composition in binder phase on wear properties of boron carbide aluminium composites [Electronic resource]Kommel, Lembit; Traksmaa, Rainer; Kimmari, EduardProceedings of 10th Nordic Symposium on Tribology NORDTRIB2002 / Ref. 18 [CD-ROM]

The structure and properties forming in boron carbide aluminium composites during processingKommel, Lembit; Hussainova, Irina; Kimmari, EduardProceedings of World Congres on Powder Metallurgy and Particulate Materials, USA. Vol. 62002 / p. 182-187

Thermally induced cracking in aluminum/boron carbide compositeKimmari, Eduard; Kommel, LembitProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 467-472 : ill

Tribological behavior of carbon nanofibers deposited on hard nanocomposite (nc-Ti1−xAlxN)/(a-Si3N4) coatingKimmari, Eduard; Podgurski, Vitali; Simunin, M.; Adoberg, Eron; Surženkov, Andrei; Viljus, Mart; Hartelt, M.; Wäsche, R.; Sildos, Ilmo; Kulu, PriitSurface & coatings technology2013 / p. 21-25 : ill

Wear and friction in boron carbide cermet-steel sliding systemKommel, Lembit; Hussainova, Irina; Kimmari, EduardAbstracts of papers from 2nd World Tribology Congress2001 / p. 93

Wear and friction in boron carbide cermet-steel sliding system [Electronic resource]Kommel, Lembit; Hussainova, Irina; Kimmari, EduardWTC 2001 : 2nd World Tribology Congress : Vienna, Austria, 03-07 September 20012001 / [4] p.: ill. [CD-ROM]

Wear resistance behavior of light-weight compositesKommel, Lembit; Kimmari, EduardAbstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" : 2007, October 25-26, Riga, Latvia2007 / p. 22

Verification of new 1000 [degree] C tester designed for investigation of wear-corrosion properties of advanced materials for high temperature applicationsAntonov, Maksim; Hussainova, Irina; Kimmari, Eduard; Juhani, KristjanProceedings of the 6th International Conference of DAAAM Baltic "Industrial Engineering" : 24-26th April 2008, Tallinn, Estonia. [2]2008 / p. 395-399 : ill