About theory, measurements and simulations of short fiber reinforced concreteHerrmann, HeikoGeneral Assembly of the Marie Curie Alumni Association : 4 to 5 March 2016, Venice, Italy : book of abstracts2016 / p. 30 : ill https://www.mariecuriealumni.eu/sites/default/files/mcaa_book_of_abstracts_april_2016.pdf

Abrasive impact wear resistance of hardfacingsKulu, Priit; Surženkov, Andrei; Tarbe, Riho; Simson, TaaviEuropean Conference on Heat Treatment and 22nd IFHTSE Congress : Heat Treatment and Surface Engineering from tradition to innovation : Venice (Italy), 20-22 May 20152015 / [9] p. : ill

Abrasive wear and mechanical properties of carbide compositesKübarsepp, Jakob; Klaasen, Heinrich; Roosaar, Tõnu; Annuka, Harri15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 56-57 : ill

Abrasive wear performance of carbide based compositesKübarsepp, Jakob; Klaasen, Heinrich; Roosaar, Tõnu; Viljus, Mart; Traksmaa, RainerProceedings of European Powder Metallurgy Congress : EURO PM2007 : Toulouse (France), 15-17 October 2007. Vol. 12007 / p. 221-226

Abrasive wear performance of carbide compositesKlaasen, Heinrich; Kübarsepp, JakobWear2006 / p. 520-526 : ill https://doi.org/10.1016/j.wear.2005.12.004

Abrasive wear resistance of powder composite materials : characterization and predictionVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, Helmo; Tarbe, RihoTribology 2008 : proceedings of the 9th International Tribology Conference : University of Pretoria, South Africa, 2-4 April 20082008 / p. 1.3(1)-1.3(10)

Abrasive wear resistance of powder composites at abrasive erosion and abrasive impact wearKulu, Priit; Veinthal, Renno; Käerdi, Helmo; Tarbe, RihoMaterials science2008 / p. 328-332 : ill

Abrasive wear resistance of powder composites at AEW and AIWKulu, Priit; Veinthal, Renno; Käerdi, Helmo; Tarbe, Riho17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 62

Abrasive wear resistance of the composite Fe alloy - recycled hardmetal based HVOF sprayed coatingsSurženkov, Andrei; Sarjas, Heikki; Mikli, Valdek; Tarbe, Riho; Vallikivi, Ahto; Kulu, PriitMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 24

Abrasive wear resistant composite hardfacings with ex-situ and in-situ synthesized carbide reinforcement = Abrasiivkulumiskindlad komposiitpinded ex-situ ja in-situ sünteesitud karbiidkõvafaasigaTkachivskyi, Dmytro2021 https://doi.org/10.23658/taltech.41/2021 https://digikogu.taltech.ee/et/Item/4ee05e38-b68b-4bb6-a708-6f2b8159f947

Acceleration data acquisition and processing system for structural health monitoringHerranen, Henrik; Kuusik, Alar; Saar, Tõnis; Reidla, Marko; Land, Raul; Märtens, Olev; Majak, Jüri2014 IEEE International Workshop On Metrology For Aerospace : May 29-30, 2014, Benevento, Italy : proceedings2014 / p. 244-248 : ill

Adding waste paper to clay plaster to raise its ability to buffer moistureNutt, Nele; Kubjas, Ardo; Nei, LembitProceedings of the Estonian Academy of Sciences2020 / p. 179–185 : ill https://doi.org/10.3176/proc.2020.3.01 https://kirj.ee/public/proceedings_pdf/2020/issue_3/proc-2020-3-179-185.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Additive Manufacturing of Aluminum-Based Metal Matrix Composites - a reviewTang, Shengyang; Ummethala, Raghunandan; Suryanarayana, Challapalli; Eckert, Jürgen; Prashanth, Konda Gokuldoss; Wang, ZhiAdvanced engineering materials2021 / 2100053 https://doi.org/10.1002/adem.202100053

Additive manufacturing of CMCs with bimodal microstructureMaurya, Himanshu Singh; Vikram, R. J.; Kosiba, Konrad; Juhani, Kristjan; Sergejev, Fjodor; Suwas, Satyam; Prashanth, Konda GokuldossJournal of alloys and compounds2023 / art. 168416, 5 p. : ill https://doi.org/10.1016/j.jallcom.2022.168416

Additive manufacturing of Mo-Mo(x)S(x+1) functional structures : engineering and electrochemical applications = Lisandustehnoloogia teel valmistatud Mo-Mo(x)S(x+1) funktsionaalsed struktuurid inseneri- ja elektrokeemilistele rakendusteleAlinejadian, Navid2022 https://doi.org/10.23658/taltech.43/2022 https://digikogu.taltech.ee/et/Item/636a0175-ae97-4a28-a2a1-c3b75c7c1eb6 https://www.ester.ee/record=b5511559*est

Additive manufacturing of novel ceramic-based composite scaffolds for bone tissue engineering = Uudsete keraamikal põhinevate komposiitkarkasside kihtlisandustehnoloogia luukoetehnikaKamboj, Nikhil Kumar2020 https://www.ester.ee/record=b5379547*est https://digikogu.taltech.ee/et/Item/92f8dc95-1820-45b0-bbdc-4193e44ec978

Additive manufacturing of silicon-wollastonite/bioactive glass based biomaterials by Selective Laser MeltingKamboj, Nikhil Kumar; Rodríguez Barbero, M. A.; Rodrigo, C.; Kazantseva, Jekaterina; Hussainova, Irina44th International Conference & Expositionon Advanced Ceramics and Composites, January 26–31, 2020, Daytona Beach, Florida : Abstract book2020 / art. ICACC-S5-028-2020 ; p. 133 https://ceramics.org/wp-content/uploads/2018/09/ICACC20_Abstracts_WebFinal.pdf

Additively manufactured mesostructured MoSi2-Si3N4 ceramic latticeMinasyan, Tatevik; Liu, Le; Holovenko, Yaroslav; Aydinyan, Sofiya; Hussainova, IrinaCeramics international2019 / p. 9926-9933 https://doi.org/10.1016/j.ceramint.2019.02.035 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Adhesion measuring method optimization in reinforced compositesKarjust, Kristo; Pohlak, Meelis; Majak, JüriProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 633-638 : ill

Adhesion of AlCrN coating deposited on TiB2/Ti composites sinteredby SPS dedicated for high temperature tribological applicationsMichalczewski, Remigiusz; Kalbarczyk, M.; Slomka, Z.; Hussainova, Irina; Liu, Le; Antonov, MaksimIOP conference series : materials science and engineering2021 / art. 012010, 9 p https://doi.org/10.1088/1757-899X/1140/1/012010

Adhesion wear performance of carbide-base compositesRoosaar, Tõnu; Kübarsepp, Jakob; Klaasen, Heinrich; Viljus, MartProceedings of Nordtrib 2008 : 13th Nordic Symposium on Tribology : Tampere, Finland, 10-13 June, 20082008 / [10] p

ALD applied to conformal rare-earth coating of ZnO nanoparticles for low temperature thermal imaging applicationsRauwel, Erwan; Galeckas, Augustinas; Rauwel, ProtimaECS transactions2014 / p. 23-31 : ill http://dx.doi.org/10.1149/06409.0023ecst

Alkylresorcinolic resin-wood composite materialSüld, Tiia-Maaja; Christjanson, PeepStambiamolekuliu junginiu chemija ir technologija = Polymer chemistry and technology1997 / p. 72-78

Al-SiC nanocomposites produced by high-energy milling and hot pressingKollo, Lauri; Bradbury, Christopher R.; Leparoux, Marc18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 25 : ill

Aluminium - stainless steel hybrid composites obtained by selective laser melting and centrifugal casting [Online resource]Holovenko, Yaroslav; Kollo, Lauri; Kolnes, MärtTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märts 2017, Tartu : teesid]2017 / [1] p. : ill http://fmtdk.ut.ee/teesid/

Aluminum based composite by novelty process : Repetitive Press Roll Bonding (RPRB)Pramono, Agus; Kollo, Lauri; Veinthal, RennoProcedia chemistry2015 / p. 473-479 : ill http://dx.doi.org/10.1016/j.proche.2015.12.081

Aluminum matrix composites reinforced with metallic glass particles with core-shell structureGuana, H.D.; Lia, C.J.; Gaoa, P.; Prashanth, Konda GokuldossMaterials science and engineering : A2020 / art. 138630, 5 p. : ill https://doi.org/10.1016/j.msea.2019.138630 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

An advanced finite element model of IPMCPugal, Deivid; Kasemägi, Heiki; Kruusmaa, Maarja; Aabloo, AlvoElectroactive Polymer Actuators and Devices (EAPAD) 20082008 / p. 692711

An improved constitutive model for short fibre reinforced cementitious composites (SFRC) based on the orientation tensorHerrmann, HeikoGeneralized continua as models for classical and advanced materials2016 / p. 213-227 https://doi.org/10.1007/978-3-319-31721-2_10

An orthotropic material model for steel fibre reinforced concrete based on the orientation distribution of fibresEik, Marika; Puttonen, Jari; Herrmann, HeikoComposite structures2015 / p. 324-336 : ill http://dx.doi.org/10.1016/j.compstruct.2014.11.018

Analysis and design of multifunctional laminated glass composite structuresMajak, Jüri; Pohlak, Meelis; Õunapuu, Erko; Auriemma, Fabio; Rämmal, Hans; Saarts, Samo24th International Conference on Composites/Nano-Engineering : ICCE-24 : Haikou, Hainan Island, China, July 17-23, 20162016 / [2] p. : ill

Analysis and realization of composite roof shellsÕiger, KarlInternational Symposium on Theory, Design and Realization of Shell and Spatial Structures : IASS 2001 : Oct 9-13, 2001, Nagoya, Japan : extended abstracts2001 / p. 414-415

Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomographySuuronen, Jussi-Petteri; Eik, Marika; Herrmann, HeikoJournal of materials science2013 / p. 1358-1367 : ill

Ando Jukk: Eesti on liiga väike riik, et täiendavate nõuetega hakkama saadaAunap, SigridEesti Tööstus2023 / lk. 4-8 : fot https://www.ester.ee/record=b5283062*est

Anisotropic thermal conduction in hierarchically structured composite using graphene-augmented alumina nanofibersSaffarshamshirgar, Ali; Ivanov, Roman; Gasik, Michael; Hussainova, IrinaXVI Conference and Exhibition Of The European Ceramic Society : abstract book2019 / p. 167

Antibacterial activity of chitosan-silver nanocompositesKasemets, Kaja; Laanoja, Jüri; Kahru, AnneDebrecen Colloquium on Carbohydrates 2020 in 2022, August 24-27, 2022Debrecen, Hungary : program and abstracts2022 / p. 47 https://konferencia.unideb.hu/sites/default/files/file_uploads/debcarb-abstract-elektronikus-2022-kesz_04-cor_0.pdf

Application of nanoindentation for constituent phases testing in ceramic–metal compositesHussainova, Irina; Jasiuk, Iwona; Hussainov, MedhatTechnical proceedings of the 2010 NSTI Nanotechnology Conference & Expo - Nanotech 2010. Vol. 1, Nanotechnology 2010 : Advanced materials, CNTs, Particles, Films and Composites2010 / p. 152-155 : ill

Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al compositesKimmari, Eduard; Kommel, LembitProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 399-407 : ill

Application potential of combining strain hardening cementitious composites and helical reinforcement for 3D concrete printed structures: Case study of a spiral staircaseHass, Lauri; Nefs, K.; Bos, F. P.; Salet, T. A. M.Journal of building engineering2023 / art. 107926 https://doi.org/10.1016/j.jobe.2023.107926

Application-oriented performance characterization of the ionic polymer transducers (IPTs) = Ioonpolümeeridest täiturite võimekuse karakteriseerimine rakendusteksHunt, Andres2017 https://digi.lib.ttu.ee/i/?7576

Assessment of 3D printed steels and composites intended for wear applications in abrasive, dry or slurry erosive conditionsKumar, Rahul, 1993-; Antonov, Maksim; Beste, U.; Goljandin, DmitriInternational journal of refractory metals and hard materials2020 / art. 105126, 9 p. : ill https://doi.org/10.1016/j.ijrmhm.2019.105126 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Assessment of cermets performance in erosive mediaHussainova, Irina; Antonov, MaksimInternational journal of materials & product technology2007 / 3/4, p. 361-376 : ill https://www.inderscience.com/info/inarticle.php?artid=13085

Assessment of residual stresses in steels and carbide composites by load and depth sensing indentation with spherical indenterSergejev, Fjodor; Petrov, MihhailEstonian journal of engineering2012 / p. 259-269 : ill

Assessment of the wear resistance of multiphase materialsHussainova, Irina; Kübarsepp, JakobAdvances in Powder Metallurgy and Particulate Materials : Hard Metals/Refractory Metals/Composites. Vol. 92004 / p. 16-27

Assessment of the wear resistance of multiphase materials [Electronic resource]Hussainova, Irina; Kübarsepp, JakobAdvances in Powder Metallurgy & Particulate Materials - 2004 : proceedings of the 2004 International Conference on Powder Metallurgy & Particulate Materials, June 13-17, Chicago, IL2004 / p. 16-27. [CD-ROM]

Atomic layer deposition of aluminaon g-Al2O3 nanofibresJõgiaas, Taivo; Arroval, Tõnis; Kollo, Lauri; Hussainova, IrinaPhysica status solidi (a) : applications and materials science2014 / p. 403-408 : ill

Autotööstus on Euroopa suurim innovatsioonivedurKübarsepp, JakobPostimees2022 / Lk. 8 https://dea.digar.ee/article/postimees/2022/05/28/12.3

Back-calculation of elastic moduli of a ply from the moduli of cross-ply laminatesLasn, Kaspar; Klauson, Aleksander; Echtermeyer, Andreas T.Mechanics of composite materials2015 / p. 55-68 : ill http://dx.doi.org/10.1007/s11029-015-9476-9

Behaviour of carbide composites in different operation conditionsKübarsepp, Jakob; Klaasen, Heinrich; Viljus, Mart; Traksmaa, Rainer; Sergejev, FjodorPowder metallurgy progress2011 / p. 258-264 : ill

Bio-inspired TiB2-TiB-TiN lattices by selective laser meltingLiu, Le; Minasyan, Tatevik; Kamboj, Nikhil; Aydinyan, Sofiya; Hussainova, IrinaMaterials Letters2020 / art. 128337 https://doi.org/10.1016/j.matlet.2020.128337 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Blanking performance and fatigue endurance of carbide compositesKlaasen, Heinrich; Kübarsepp, Jakob; Preis, Irina; Sergejev, Fjodor; Traksmaa, RainerProceedings of 10th International Conference and Exhibition of the European Ceramic Society : June 17-21, 2007, Berlin2007 / [4] p

1-butyl-3-methylimidazolium chloride assisted electrospinning of SAN/MWCNTs conductive reinforced composite membranesGudkova, Viktoria; Krumme, Andres; Märtson, Triin; Rikko, M.; Tarasova, Elvira; Savest, Natalja; Viirsalu, MihkelJournal of electrostatics2015 / p. 11-16 : ill http://dx.doi.org/10.1016/j.elstat.2015.09.002

1-butyl-3-methylimidazolium chloride assisted electrospinning of SAN/MWCNTs conductive reinforced composite membranes [Online resource]Vassiljeva, Viktoria; Krumme, Andres; Märtson, Triin; Rikko, M.; Tarasova, Elvira; Savest, Natalja; Viirsalu, MihkelTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märts 2017, Tartu : teesid]2017 / [1] p http://fmtdk.ut.ee/teesid/

Boron carbide based composites microstructure and properties relationships to processing featuresKommel, Lembit; Kübarsepp, Jakob; Klaasen, HeinrichEuropean Powder Metallurgy Conference on Meeting the Challenges of a Changing Market Place : EURO PM2003 : Valencia, Spain, October 20-22, 2003 : conference proceedings. Volume 22003 / p. 87-92

Boron containing solid and superhard composites production techniques and properties [Electronic resource]Kommel, Lembit; Kübarsepp, Jakob; Tarraste, Marek; Kolnes, MärtWorld PM2016 proceedings2016 / [6] p. : ill. [USB]

Challenges and perspectives in control of ionic polymer-metal composite (IPMC) actuators : a surveyAabloo, Alvo; Belikov, Juri; Kaparin, Vadim; Kotta, ÜlleIEEE Access2021 / art. 9133056, p. 121059-121073 https://doi.org/10.1109/ACCESS.2020.3007020 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Characterisation and modelling of erosion wear of powder composite materials and coatingsKulu, Priit; Veinthal, Renno; Käerdi, HelmoInternational journal of materials & product technology2007 / 3/4, p. 425-447 : ill

Characterisation of frost-retted hemp fibres for use as reinforcement in biocomposites = Külmligu kanepikiudude karakteriseerimine kasutamiseks sarrusena biokomposiitidesAlao, Percy Festus2022 https://doi.org/10.23658/taltech.31/2022 https://digikogu.taltech.ee/et/Item/1cb2c061-7df8-4d8b-806a-fd53ea8820b5 https://www.ester.ee/record=b5500189*est

Characterisation of TiC-NiMo reinforced Ni-based hardfacingZikin, Arkadi; Badisch, Ewald; Hussainova, Irina; Tomastik, C.; Danninger, HerbertSurface & coatings technology2013 / p. 36-44 : ill

Characterisation of TiC-NiMo reinforced NiCrBSi hardfacingZikin, Arkadi; Hussainova, Irina; Badisch, Ewald; Danninger, HerbertProceedings 20th IFHTSE : International Federation for Heat Treatment and Surface Engineering Congress : Beijing, China, October 23-25, 20122012 / p. 535-540 https://www.sciencedirect.com/science/article/pii/S0257897213001825

Characterization and modelling of erosion wear of powder composite materials and coatingsVeinthal, Renno2005 https://www.ester.ee/record=b2097488*est

Characterization and prediction of abrasive wear of powder composite materialsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoProceedings of Nordtrib 2008 : 13th Nordic Symposium on Tribology : Tampere, Finland, 10-13 June, 20082008 / ? p

Characterization and prediction of abrasive wear of powder composite materialsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoWear2009 / p. 2216-2222 : ill

Characterization of composite thermal spray powdersPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitEURO PM2005 : congress & exhibition : 2-5 October 2005, Prague, Czech Republic : proceedings. Volume 22005 / p. 87-91

Characterization of microstructure and mechanical properties of friction stir welded AlMg5-Al2O3 nanocompositesBabu, N. Kishore; Kallip, Kaspar; Leparoux, MarcMaterials science and engineering : A2016 / p. 109-122 : ill http://dx.doi.org/10.1016/j.msea.2016.01.102

Characterization of powdermetal matrix composites for erosion wear applicationsVeinthal, Renno; Kulu, Priit; Pirso, Jüri; Käerdi, HelmoExtended abstracts of 2006 Powder Metallurgy World Congress : Busan, Korea, September 24-28. 22006 / p. 1056

Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings [Electronic resource]Kulu, Priit; Veinthal, RennoProceedings of XIIth International Conference on Composites/Nano Engineering : ICCE-12 : Tenerife, Spain2005 / ? p. [CD-ROM]

Characterization of the structure and properties of composite powder materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoMaterials science = Medžiagotyra2005 / 4, p. 376-380 : ill

Characterization of WC-Co composite thermal spray powder and coatingPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, Priit15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 52-53

Characterization of WC-Co composite thermal spray powders and coatingsPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitProceedings of the Estonian Academy of Sciences. Engineering2006 / 4, p. 435-444 : ill

Characterization of WC-Co thermal spray coatings based on the composite powdersPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitPowder metallurgy progress : journal of science and technology of particle materials2006 / p. 34-41 : ill

Circular production, designing, and mechanical testing of polypropylene-based reinforced composite materials : statistical analysis for potential automotive and nuclear applicationsHussain, Abrar; Podgurski, Vitali; Goljandin, Dmitri; Antonov, Maksim; Sergejev, Fjodor; Krasnou, IlliaPolymers2023 / art. 3410, 30 p. : ill https://doi.org/10.3390/polym15163410

Colloquium 582 : Short Fibre Reinforced Cementitious Composites and Ceramics : book of abstracts, March 20-22, 20172017 http://www.ester.ee/record=b4658990*est

Combustion synthesis and consolidation of Ni-W nanocomposite materialZakaryan, Marieta; Aydinyan, Sofiya; Kharatyan, SurenCeramics in modern technologies2019 / p. 67-74 https://doi.org/10.29272/cmt.2018.0007

Combustion synthesis of MoSi2 based composite and selective laser sintering thereofMinasyan, Tatevik; Aghayan, Marina; Liu, Le; Aydinyan, Sofiya; Kollo, Lauri; Hussainova, Irina; Rodriguez, Miguel AngelJournal of the European Ceramic Society2018 / p. 3814-3821 : ill https://doi.org/10.1016/j.jeurceramsoc.2018.04.043 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Combustion synthesis of TiC-ZrC composite powder : role of mechanical activationHussainova, Irina; Manaseryan, L.; Khachatryan, H.; Hobosyan, M.; Kharatyan, SurenWorld PM2010 proceedings. Vol. 2, Sintering, Secondary and Finishing Operations, Full Density and Alternative Consolidation2010 / p. 181-188

Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressingXi, L. X.; Zhang, H.; Wang, P.; Li, H.C.; Prashanth, Konda GokuldossCeramics international2018 / p. 17635-17642 : ill https://doi.org/10.1016/j.ceramint.2018.06.225 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Comparative study of the VARTM, VAP and MTI vacuum infusion processesAruniit, Aare; Herranen, Henrik; Miller, KristenEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 71-76 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.71

Comparing tungsten carbide based composites reinforced by alumina nanofibers or zirconiaYung, Der-Liang; Dong, Minjie; Hussainova, IrinaProceedings of the PM13 International Conference on Powder Metallurgy and Particulate Materials2013 / p. 24-35 : ill

Comparison of laminate stiffness as measured by three experimental methodsLasn, Kaspar; Echtermeyer, Andreas T.; Klauson, Aleksander; Chati, Farid; Decultot, DominiquePolymer testing2015 / p. 143-152 : ill http://dx.doi.org/10.1016/j.polymertesting.2015.04.006

Comparison of mechanical and antibacterial properties of TiO2/Ag ceramics and Ti6Al4V-TiO2/Ag composite materials using combined SLM-SPS techniquesRahmani Ahranjani, Ramin; Rosenberg, Merilin; Ivask, Angela; Kollo, LauriMetals2019 / art. 874, 13 p. : ill https://doi.org/10.3390/met9080874 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Comparison of the wear and frictional properties of Cu matrix composites prepared by pulsed electric current sinteringRitasalo, Riina; Antonov, Maksim; Veinthal, Renno; Hannula, Simo-PekkaProceedings of the Estonian Academy of Sciences2014 / p. 62-74 : ill https://artiklid.elnet.ee/record=b2665219*est

Composite powders based on iron self-fluxing alloy and recycled cermet powders for thermal sprayGoljandin, Dmitri; Sarjas, Heikki; Kulu, Priit; Surženkov, Andrei; Mikli, Valdek; Käerdi, HelmoMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 40

Composite powders for coatings on the base of recovered hard metalsKulu, Priit; Tümanok, Aleksei; Arensburger, Daniil; Pihl, ToomasReports and theses of International Conference of Welding Technologies, Equipment, Materials : MET-971997 / p. 135-143

Composite powders for thermal sprayKulu, Priit; Zimakov, Sergei; Arensburger, DaniilProceedings of the 8th International Baltic Conference : Materials Engineering-99 : September 23-24, Kaunas, Lithuania1999 / p. 156

Composite powders for thermal sprayKulu, Priit; Zimakov, Sergei; Arensburger, DaniilMedžiagotyra = Materials science1999 / p. 22-26 : ill

Composites compaction by severe plastic deformationKommel, Lembit; Kollo, LauriMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 29

Composites from flax fiber and LLDPESoiela, Mari; Viikna, AntiBaltic Polymer Symposium 2006 : September 20-22, 2006 : programme and proceedings2006 / p. 6

Composites of low-density polyethylene and poly(lactic acid) with cellulose and its derivatives = Madaltiheda polüetüleeni ja polü(piimhappe) komposiidid tselluloosi ning selle derivaatidegaŠumigin, Dmitri2014 https://www.ester.ee/record=b3078663*est

Compound carbide composites produced by diffusion bondingKübarsepp, Jakob; Klaasen, Heinrich; Laansoo, AndresEURO PM2001 : [European Congress and Exhibition on Powder Metallurgy] : October 22-24, 2001, Nice, France. Vol. 1 : proceedings2001 / p. 158-163 : ill

Conjoined structures of carbon nanotubes and graphene nanoribbonsKrasnenko, Veera; Boltruško, Vadim; Klopov, Mihhail; Hižnjakov, VladimirPhysica scripta2014 / p. 1-4 : ill

A constitutive function for the heat flux in short-fiber-reinforced compositesHerrmann, HeikoJournal of non-equilibrium thermodynamics2015 / p. 257-263 https://doi.org/10.1515/jnet-2015-0005

Control of radial increment and winding density of composite cylindrical shellsKutin, Aleksei; Arjassov, Gennadi; Vu, Trieu Minh; Musalimov, Victor; Moezzi, Reza; Cyrus, JindrichMM science journal2020 / p. 4149−4153 https://doi.org/10.17973/MMSJ.2020_11_2020058 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Corrosion behavior of high velocity oxy-fuel sprayed composite Ni-/Fe-based self-fluxing alloy - cermet coatingsSarjas, Heikki; Surženkov, Andrei; Baroninš, Janis; Viljus, Mart; Traksmaa, Rainer; Kulu, PriitJournal of mineral, metal and material engineering2018 / p. 1-9 : ill http://www.scientificarray.org/journal-of-mineral-metal-and-material-engineering-volume-4/

Critical radius of zirconia inclusions in transformation toughening of ceramicsFilippov, Roman; Freidin, Alexander; Hussainova, Irina; Vilchevskaya, ElenaPhysical mesomechanics2015 / p. 33-42 : ill http://dx.doi.org/10.1134/S1029959915010051

CuInS2–Poly(3-(ethyl-4-butanoate)thiophene) nanocomposite solar cells : preparation by an in situ formation route, performance and stability issuesMaiera, Eugen; Ratha, Thomas; Haas, Wernfried; Werzer, Oliver; Saf, Robert; Hofer, Ferdinand; Meissner, Dieter; Volobujeva, Olga; Bereznev, Sergei; Mellikov, Enn; Amenitsch, Heinz; Resel, Roland; Trimmel, GregorSolar energy materials and solar cells2011 / p. 1354–1361 : ill

Customization of CAD system for decision support of mould design processHermaste, Aigar; Sutt, Annes; Küttner, ReinProceedings of the 5th International Conference of DAAAM Baltic : Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur : 20-22 April 2006, Tallinn, Estonia2006 / p. 121-126 : ill

DC-conductivity testing combined with photometry for measuring fibre orientations in SFRCEik, Marika; Lõhmus, Karl; Tigasson, Martin; Listak, Madis; Puttonen, Jari; Herrmann, HeikoJournal of materials science2013 / p. 3745-3759 : ill

Decomposition method for solving optimal material orientation problemsMajak, Jüri; Pohlak, Meelis15th International Conference on Composite Structures : Portugal, Porto2009 / ? p

Deformation behavior of metallic lattice structures with symmetrical gradients of porosity manufactured by metal additive manufacturingJagadeesh, B.; Duraiselvam, Muthukannan; Prashanth, Konda GokuldossVacuum2023 / art. 111955 https://doi.org/10.1016/j.vacuum.2023.111955

Densification and characterization of spark plasma sintered ZrC–ZrO2 compositesHussainova, Irina; Voltšihhin, Nikolai; Cura, M. Erkin; Hannula, Simo-PekkaMaterials science and engineering : A - structural materials: properties, microstructure and processing2014 / p. 75-81 : ill

Design and manufacturing of variable angle tow laminateHaavajõe, Anti; Mikola, Madis; Pohlak, MeelisEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 59-64 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.59

Design and technology of oxides-containing ceramic-based composites = Oksiide sisaldava komposiitkeraamika tehnoloogiaVoltšihhin, Nikolai2014 https://www.ester.ee/record=b4438763*est

Design and testing of new composite from recycled GFRPKers, Jaan; Majak, Jüri; Goljandin, Dmitri; Saarna, Mart; Gregor, Andre; Siinmaa, A.; Tall, Kaspar14th European Conference on Composite Materials : 7-10 June 2010, Budapest, Hungary2010 / [10] p

Design of an additively manufactured polymer composite electrical machineSarap, Martin; Kallaste, Ants; Naseer, Muhammad Usman; Tiismus, Hans; Rjabtšikov, Viktor; Ghahfarokhi, Payam Shams; Vaimann, Toomas; Aman, Alexander; Kutia, Mykhailo2023 IEEE 17th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG)2023 / 5 p https://doi.org/10.1109/CPE-POWERENG58103.2023.10227413

Design of multifunctional laminated glass composite panelMajak, Jüri; Pohlak, Meelis; Shvartsman, Boris; Õunapuu, Erko; Kirs, MaarjusICCS19 : 19th International Conference on Composite Structures : Sheraton Porto Hotel & Spa, 5-8 September 2016 : proceedings2016 / p. 140 http://dx.doi.org/10.15651/978-88-748-8977-8

Design of superhard c-BC2N-precipitates in B4C/Al-composites through SHS and heat treatmentKommel, Lembit; Metsvahi, Rainer; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, RainerProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 645-650 : ill

Design optimization of graphene laminates for maximum fundamental frequencyMajak, Jüri; Kirs, Maarjus; Eerme, Martin; Tungel, Ernst; Lepikult, ToomasProceedings of the Estonian Academy of Sciences2017 / p. 354-362 : ill https://doi.org/10.3176/proc.2017.4.08

Design optimization of smart composite structures with embedded devices = Integreeritud elektroonikakomponentidega targa komposiitmaterjali väljatöötamineHerranen, Henrik2014 https://www.ester.ee/record=b3092011*est

Determination of resistance to wear of particulate compositeAruniit, Aare; Antonov, Maksim; Kers, Jaan; Krumme, AndresEngineering materials & tribology XXII2014 / p. 188-191

Determination of the mechanical properties of carbide composites by spherical indentationSergejev, Fjodor; Petrov, Mihhail; Kübarsepp, JakobProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 723-728 : ill

Development of equipment and mathematical model for manufacturing of steered fibre laminate = Seadmete ja matemaatilise mudeli arendamine muutuva kiuga laminaadi valmistamiseksHaavajõe, Anti2019 https://www.ester.ee/record=b5284222*est https://digikogu.taltech.ee/et/Item/3328472d-4a53-4e56-a892-93453155327c

Development of solid lubricated composites for high-temperature tribological applications = Tahkmäärdega komposiitide väljatöötamine kõrgtemperatuurseteks triborakendusteksKumar, Rahul, 1993-2022 https://doi.org/10.23658/taltech.75/2022 https://digikogu.taltech.ee/et/Item/b117812c-4248-4542-ba39-fcbfe5349f4e https://www.ester.ee/record=b5528171*est

Development of sustainable polypropylene based composites = Polüpropeeni baasil jätkusuutlike komposiitide arendusHussain, Abrar2023 https://doi.org/10.23658/taltech.64/2023 https://digikogu.taltech.ee/et/Item/ffead123-ec1c-4d27-baa6-ed82c6d527cc https://www.ester.ee/record=b5645373*esthttps://www.ester.ee/record=b5645373*est

Directly electrospun electrodes for electrical double-layer capacitors from carbide-derived carbonMalmberg, Siret; Arulepp, Mati; Savest, Natalja; Tarasova, Elvira; Vassiljeva, Viktoria; Krasnou, Illia; Käärik, Maike; Mikli, Valdek; Krumme, AndresJournal of electrostatics2020 / art. 103396, 7 p. : ill https://doi.org/10.1016/j.elstat.2019.103396 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

A distributed model of ionomeric polymer metal compositePunning, Andres; Johanson, Urmas; Anton, Mart; Aabloo, Alvo; Kruusmaa, MaarjaJournal of intelligent material systems and structures2009 / p. 1711-1724 : ill https://doi.org/10.1177/1045389X0933717

Dry reciprocating sliding wear behaviour of alumina–silicon carbide nanocomposite fabricated by ceramic injection moldingSmirnov, Anton; Bartolome, Jose F.; Moya, J.S.; Kern, F.; Gadow, R.Journal of the European Ceramic Society2011 / p. 469-474 : ill

Dry sliding friction of cubic boron nitride based composite synthesized by SHS [Electronic resource]Kimmari, Eduard; Kommel, LembitProceedings of 12th Nordic Symposium in Tribology : NORDTRIB 2006 : Helsingor, Denmark, 7-9 June 20062006 / [CD-ROM]

Durability of wood plastic composites : influence of weathering on the mechanical propertiesKallakas, Heikko; Poltimäe, Triinu; Süld, Tiia-Maaja; Kers, JaanProceedings of The Northern European Network for Wood Science and Engineering : Edinburgh, Scotland, 13-14 October 20142014 / p. 229

Dynamical variation of the impedance of IPMCKruusamäe, Karl; Punning, Andres; Kruusmaa, Maarja; Aabloo, AlvoProceedings of SPIE2009 / Electroactive Polymer Actuators and Devices (EAPAD) 2009, p. 72870V-1 - 72870V-9 : ill https://www.researchgate.net/publication/236115865_Dynamical_variation_of_the_impedances_of_IPMC

Effect of accelerated weathering on the mechanical properties of wood-plastic compositesKallakas, Heikko; Poltimäe, Triinu; Süld, Tiia-Maaja; Kers, JaanBaltic Polymer Symposium 2014 : programme and abstracts : Laulasmaa, Estonia, September 24-26, 20142014 / p. 75

Effect of atomic layer deposited aluminium oxide on mechanical properties of porous silicon carbideJõgiaas, Taivo; Kollo, Lauri; Kozlova, Jekaterina; Tamm, Aile; Hussainova, Irina; Kukli, KaupoCeramics international2015 / p. 7519-7528 : ill http://dx.doi.org/10.1016/j.ceramint.2015.02.074

Effect of atomic oxygen irradiation on the structural and tribological properties of the MoS2/Al2O3/PI compositesZhao, Gai; Wang, Qihua; Hussainova, Irina; Ding, QingjunEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 239-243 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.239

Effect of attrition milling on grain size and properties of compositesKommel, Lembit; Kimmari, Eduard; Traksmaa, RainerEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 25

Effect of basalt addition on tribological performance of FeCrSiB HVOF coatingsAntonov, Maksim; Surženkov, Andrei; Hussainova, Irina; Goljandin, Dmitri; Mikli, ValdekEstonian journal of engineering2012 / p. 211-220 : ill https://artiklid.elnet.ee/record=b2527729*est

Effect of basalt reinforcement type and content on the abrasive wear behaviour of polymer compositesAntonov, Maksim; Kers, Jaan; Liibert, Laura; Shuliak, Volodymyr; Smirnov, Anton; Bartolome, Jose F.Engineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 181-188 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.181

Effect of birch false heartwood on the physical and mechanical properties of wood-plastic composites [Online resource]Kallakas, Heikko; Martin, Mihkel; Ayansola, Gbenga; Poltimäe, Triinu; Krumme, Andres; Kers, JaanTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märtsil 2018, Tallinn : teesid] GSFMT Scientific Conference 2018 : Tallinn, March 7-8, 2018 : abstracts2018 / 1 p http://fmtdk.ut.ee/teesid-2018/

Effect of carbide phase and binder chemical composition on surface fatigue of carbide composites [Electronic resource]Petrov, Mihhail; Kübarsepp, Jakob; Sergejev, Fjodor; Viljus, MartEuro PM2015 Congress & Exibition : proceedings : 4-7 October 2015, Reims Congress Centre, Reims, France2015 / [6] p. : ill. [USB]

Effect of cBN content and additives on sliding and surface fatigue wear of spark plasma sintered Al2O3-cBN compositesKumar, Rahul, 1993-; Antonov, Maksim; Klimczyk, Piotr; Mikli, Valdek; Gomon, DmitriWear2022 / art. 204250 https://doi.org/10.1016/j.wear.2022.204250 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of ceramic reinforcement on the microstructural, mechanical and tribological behavior of Al-Cu alloy metal matrix compositeAktar Zahid Sohag, Md; Gupta, Pallav; Kondal, Neha; Kumar, Devendra; Singh, Neera; Jamwal, AnbeshMaterials today: proceedings2020 / p. 1407-1411 https://doi.org/10.1016/j.matpr.2019.08.179 Conference Proceedings at Scopus Article at Scopus Article at WOS

Effect of chemical modification of wood flour on the mechanical properties of wood-plastic compositesKallakas, Heikko; Shamim, M. A.; Olutubo, T.; Poltimäe, Triinu; Süld, Tiia-Maaja; Krumme, Andres; Kers, JaanAgronomy research2015 / p. 639-653 : ill http://agronomy.emu.ee/vol133/13_3_2_B5.pdf

Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites [Electronic resource]Kallakas, Heikko; Shamim, M. A.; Olutubo, T.; Poltimäe, Triinu; Süld, Tiia-Maaja; Krumme, Andres; Kers, Jaan6th International Conference Biosystems Engineering 2015 : 7-8 May 2015, Tartu, Estonia : book of abstracts2015 / p. 94. [CD-ROM] http://bse.emu.ee/BSE2015_Book%20of%20ABSTRACTS_ISBN.pdf

Effect of composite layers based on dyes with different type of conductivity on photovoltaic properties of CIS filmsVerbitsky, Anatoly; Vertsimakha, Yaroslav; Studzinsky, Sergei; Bereznev, SergeiICEPOM-6 conference abstracts : 6th International Conference on Electronic Processes in Organic Materials : Gurzuf, Crimea, Ukraine, September 25-29, 20062006 / p. 54-55 https://www.researchgate.net/publication/233173021_Effect_of_Composite_Layers_Based_on_Dyes_with_Different_Types_of_Conductivity_on_Photovoltaic_Properties_of_CIS_Films

Effect of fly-ash cenospheres on properties of clay-ceramic syntactic foamsRugele, Kristine; Lehmhus, Dirk; Hussainova, Irina; Peculevica, Julite; Lisnanskis, Marks; Shishkin, AndreiMaterials2017 / art. 828, p. 1-17 : ill http://dx.doi.org/10.3390/ma10070828

Effect of grain growth inhibitors VC/Cr3C2 on WC-ZrO2-Ni composite mechanicsYung, Der-Liang; Dong, Minjie; Hussainova, IrinaEngineering materials & tribology XXII2014 / p. 106-109

Effect of HBN on wear of AlCrN-coated spark plasma - sintered TiB2/Ti composites at temperatures up to 900°CLuszcz, Maciej; Michalczewski, Remigiusz; Kalbarczyk, Marek; Osuch-Słomka, Edyta; Molenda, Jaroslaw; Liu, Le; Antonov, Maksim; Hussainova, IrinaQuarterly tribologia2022 / p. 43-55 https://doi.org/10.5604/01.3001.0015.8756

Effect of heat treatment on the phase transformation and magnetic properties of BPSCCO/LPMO compositesStaneva, Anna; Blagoev, Blagoy; Mikli, ValdekJournal of alloys and compounds2014 / p. 223-228 : ill

Effect of hemp fiber surface treatment on the moisture/water resistance and reaction to fire of reinforced PLA compositesAlao, Percy Festus; Marrot, Laetitia; Kallakas, Heikko; Just, Alar; Poltimäe, Triinu; Kers, JaanMaterials2021 / art. 4332, 17 p. : ill https://doi.org/10.3390/ma14154332 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of hemp fibre length on the properties of polypropylene compositesAlao, Percy Festus; Kallakas, Heikko; Poltimäe, Triinu; Kers, JaanAgronomy research2019 / p. 1517–1531 : ill https://doi.org/10.15159/AR.19.146 Journal metrics at Scopus Article at Scopus

Effect of hemp fibre length on the properties of polypropylene composites [Online resource]Alao, Percy Festus; Kallakas, Heikko; Kers, JaanTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [4.-5. veebruar, 2019, Tartu : teesid]2019 / 1 p.: ill http://fmtdk.ut.ee/teesid-2019/

Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materialsKwon, Hansang; Saarna, Mart; Yoon, Songhak; Weidenkaff, Anke; Leparoux, MarcMaterials science and engineering : A2014 / p. 338-345 https://doi.org/10.1016/j.msea.2013.10.046

Effect of new superhard phases formation on properties of composite processed by SHSKommel, Lembit; Tamm, Toomas; Metsvahi, RaidoEngineering materials and tribology2013 / p. 137-142

Effect of NiCoFeAlTi high entropy intermetallic reinforcement particle size on the microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy composites fabricated by selective laser meltingZhang, Zhiyu; Ma, Pan; Fang, Yacheng; Yang, Zhilu; Zhang, Nan; Prashanth, Konda Gokuldoss; Jia, YandongJournal of alloys and compounds2023 / art. 169417 https://doi.org/10.1016/j.jallcom.2023.169417

Effect of oxidation on abrasive wear behaviour of titanium carbide based composites in silica mediumAntonov, Maksim; Hussainova, Irina; Pirso, Jüri; Juhani, Kristjan; Viljus, MartEstonian journal of engineering2010 / 4, p. 264-272 : ill

Effect of residual stresses on the surface fatigue of TiC-based carbide compositesSergejev, Fjodor; Klaasen, Heinrich; Kübarsepp, JakobProceedia engineering2011 / p. 3152-3161 : ill

Effect of sintering method on surface fatigue of carbide compositesPetrov, Mihhail; Kübarsepp, Jakob; Sergejev, Fjodor; Viljus, Mart; Tarraste, MarekEngineering materials and tribology XXV2017 / p. 368-372 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.721.368

Effect of substrate plate heating on the microstructure and properties of selective laser melted Al-20Si-5Fe-3Cu-1Mg alloyMa, Pan; Ji, Pengcheng; Jia, Yandong; Shi, Xuerong; Yu, Zhishui; Prashanth, Konda GokuldossMaterials2021 / art. 330 https://doi.org/10.3390/ma14020330 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coatingAntonov, Maksim; Afshari, Hossein; Baroninš, Janis; Adoberg, Eron; Raadik, Taavi; Hussainova, IrinaTribology international2018 / p. 500-514 : ill https://doi.org/10.1016/j.triboint.2017.05.035 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of thermo-elastic residual stresses on erosive performance of cermets with core-rim structured ceramic grainsHussainova, Irina; Kolesnikova, Anna; Hussainov, Medhat; Romanov, AlexeyWear2009 / p. 177-185 : ill https://www.sciencedirect.com/science/article/pii/S0043164809001446

Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix compositesSingh, Neera; Ummethala, Raghunandan; Surreddi, Kumar Babu; Jayaraj, Jayamani; Sokkalingam, Rathinavelu; Rajput, Monika; Chatterjee, Kaushik; Prashanth, Konda GokuldossJournal of alloys and compounds2022 / art. 166502 https://doi.org/10.1016/j.jallcom.2022.166502 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser meltingXi, L.; Wang, P.; Prashanth, Konda Gokuldoss; Li, H.Journal of alloys and compounds2019 / p. 551-556 : ill https://doi.org/10.1016/j.jallcom.2019.01.327 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Effect of WC grain size and content on low stress abrasive wear of manual arc welded hardfacings with low-carbon or stainless steel matrixJankauskas, Vytenis; Antonov, Maksim; Varnauskas, Valentinas; Skirkus, Remigijus; Goljandin, DmitriWear2015 / p. 378-390 : ill http://dx.doi.org/10.1016/j.wear.2015.02.063

The effect of wood flour fraction size on the properties of wood-plastic compositesKängsepp, Kärt; Poltimäe, Triinu; Liimand, K.; Kallakas, Heikko; Süld, Tiia-Maaja; Repeshova, Irina; Goljandin, Dmitri; Kers, JaanProceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia2014 / p. 366-371

EKA disainerid kudusid uuringu raames teksapükstest mütsidpostimees.ee2023 EKA disainerid kudusid uuringu raames teksapükstest mütsid

Elaboration of method for preparation of IVB group metal carbides nanocompositesUmalas, Madis; Reedo, Valter; Lõhmus, Ants; Hussainova, IrinaFunctional Materials & Nanotechnologies : Riga, 5-8 April 20112011 / [1] p

Electrocatalysts for oxygen reduction reaction based on electrospun polyacrylonitrile, styrene–acrylonitrile copolymer and carbon nanotube composite fibresMooste, Marek; Kibena-Põldsepp, Elo; Vassiljeva, Viktoria; Uibu, Mai; Krumme, AndresJournal of materials science2019 / p. 11618–11634 : ill https://doi.org/10.1007/s10853-019-03725-z Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Electroconductive alumina-TiC-Ni nanocomposites obtained by spark plasma sinteringRodriguez-Suarez, T.; Bartolome, Jose F.; Smirnov, Anton; Lopez-Esteban, S.; Diaz, L.A.; Torrecillas, R.; Moya, J.S.Ceramics international2011 / p. 1631-1636 : ill

Electroconductive oxide ceramics with graphene‐encapsulated fillersHussainova, Irina; Drozdova, Maria; Ivanov, Roman; Kale, Sudhir S.; Jasiuk, IwonaProceedings of the 42nd international conference on advanced ceramics and composites2019 / p. 251–258 https://doi.org/10.1002/9781119543343.ch25 Conference proceeding at Scopus Article at Scopus Article at WOS

Electroconductive oxide ceramics with hybrid graphenated nanofibers = Elektrijuhtiva oksiid-grafeenkiudkeraamika tehnoloogia ja püsivusDrozdova, Maria2017 https://digi.lib.ttu.ee/i/?9119 http://www.ester.ee/record=b4748247*est

Electro-deposited nano-Ni/reduced graphene oxide composite film of corrugated surface for high voltammetric sensitivityAlinejadian, Navid; Kazemi, Sayed Habib; Nasirpouri, Farzad; Odnevall, Inger CharlottaMaterials chemistry and physics2023 / art. 127288, 8 p. : ill https://doi.org/10.1016/j.matchemphys.2022.127288

Electroless Ni-P-MoS2-Al2O3 composite coating with hard and self-lubricating propertiesMohanty, Shalini; Jamal, Naghma; Das, Alok Kumar; Prashanth, Konda GokuldossMaterials2022 / art. 6806 https://doi.org/10.3390/ma15196806 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Embedded electronics influence on the strength of carbon fiber laminateHerranen, Henrik; Kers, Jaan; Preden, Jürgo-Sören; Talalaev, Robert; Eerme, Martin; Majak, Jüri; Lend, Henri; Allikas, GeorgAdvances in applied materials and electronics engineering III2014 / p. 239-243

Energy performance of ETICS integrated with a flexible photovoltaic panelHeim, Dariusz; Wieprzowicz, Anna; Knera, Dominika; Ilomets, Simo; Kalamees, Targo; Spitalsky, ZdenoBuilding simulation conference proceedings2022 / p. 64-71 https://doi.org/10.26868/25222708.2021.30194

Environmentally assisted abrasive erosive wear of metals matrix composites [Electronic resource]Veinthal, Renno; Kulu, Priit; Aulik, Allan; Siitonen, P.Conference on PM and Advanced Materials and Materials Technology Innovation : 27.-28.02.2005, Tampere, Finland2005 / ? p. [CD-ROM]

Erosion of Cr3C2-based cermets at room and elevated temperaturesAntonov, Maksim; Hussainova, IrinaProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 137-140 : ill

Erosions und Bruchfestigkeit von TIC-stahl WerbundwerkstoffenValdma, Leo; Kübarsepp, Jakob; Annuka, HarriIX Internationale Pulvermetallurgische Tagung in der DDR : Sintern, Phänomene, Technologien und Werkstoffe, Dresden, 23. bis 25. 10. 19891989 / s. 209

Erosive wear of advanced composites based on WCHussainova, Irina; Antonov, Maksim; Zikin, ArkadiTribology international2012 / p. 254-260 : ill https://www.sciencedirect.com/science/article/abs/pii/S0301679X11001630

Erosive wear resistance of nature-inspired flexible materialsKumar, Rahul, 1993-; Antonov, Maksim; Holovenko, Yaroslav; Surženkov, AndreiTribology letters2020 / art. 51, 8 p. : ill https://doi.org/10.1007/s11249-020-01296-8 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Evaluation of deformation methods of Cu-Al2O3 systems with quality factorBesterci, Michal; Sülleiova, Katarina; Kulu, PriitProceedings of the Estonian Academy of Sciences. Engineering2003 / 4, p. 246-251 : ill https://artiklid.elnet.ee/record=b1014287*est

Evaluation of elastic constants in composite laminates with guided wave tomography [Online resource]Ratassepp, Madis; Rao, Jing; Yu, X.; Fan, Zheng12th European Conference on Non-destructive Testing : proceedings2018 / 7 p. : ill http://cdn.ecndt2018.com/wp-content/uploads/2018/05/ecndt-0597-2018-File001.pdf http://www.ecndt2018.com/programme/list-of-authors/

Evaluation of stiffness and damage of laminar composites = Komposiitlaminaatide jäikuse ja kahjustuste hindamineLasn, Kaspar2015

Evolution of microstructure and mechanical properties of LM25–HEA composite processed through stir casting with a bottom pouring systemChinababu, Mekala; Krishna, Nandivelegu Naga; Sivaprasad, Katakam; Prashanth, Konda Gokuldoss; Bhaskara, EluriMaterials2022 / art. 230 https://doi.org/10.3390/ma15010230 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Exothermically synthesized B4C-Al composites for dry sliding = Eksotermiliselt sünteesitud B4C-Al komposiidid tööks liugehõõrdumise tingimustesKimmari, Eduard2008 https://www.ester.ee/record=b2413238*est

Experimental determination of elastic constants of an orthotropic composite plate by using Lamb wavesLasn, Kaspar; Klauson, Aleksander; Chati, Farid; Decultot, DominiqueMechanics of composite materials2011 / p. 435-446 : ill

Experimental identification of elastic constants of an orthotropic composite plateLasn, Kaspar; Klauson, Aleksander; Chati, Farid; Decultot, DominiqueProceedings of 16th International Conference on Composite Structures (ICCS16), Porto, June 28-30, 20112011 / [2] p

Experimental mechanics analysis of recycled polypropylene-cotton composites for commercial applicationsHussain, Abrar; Goljandin, Dmitri; Podgurski, Vitali; Abbas, Muhammad Mujtaba; Krasnou, IlliaAdvanced industrial and engineering polymer research2023 / p. 226-238 : ill https://doi.org/10.1016/j.aiepr.2022.11.001

Experimental study of steered fibre composite productionHaavajõe, Anti; Mikola, Madis; Osali, Hadi; Pohlak, Meelis; Herranen, HenrikProceedings of the Estonian Academy of Sciences2017 / p. 295-299 : ill https://doi.org/10.3176/proc.2017.3.09 http://www.ester.ee/record=b2355998*est

Fabrication of alumina nanocomposites reinforced by a novel type of alumina nanofiber and graphene coated alumina nanofiberDrozdova, Maria; Ivanov, Roman; Aghayan, Marina; Hussainova, Irina; Dong, Minjie; Rodriguez, Miguel AngelProceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia2014 / p. 337-341 : ill

Fabrication of Cu-Mo composites combining SHS and SLS technologies : poster presentationAydinyan, Sofiya; Minasyan, Tatevik; Kirakosyan, Hasmik; Aghayan, Marina; Hussainova, Irina; Kharatyan, SurenECerS 2017 : 15th Conference & Exhibition of the European Ceramic Society, July 9–13, 2017, Budapest, Hungary : Book of abstracts2017 / p. 48 https://static.akcongress.com/downloads/ecers/ecers2017-abstract-book.pdf

Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium compositesLi, F. X.; Chen, P.; Chen, Z.; Prashanth, Konda GokuldossJournal of alloys and compounds2019 / p. 939-945 : ill https://doi.org/10.1016/j.jallcom.2019.07.277 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Fatigue mechanics of carbide compositesSergejev, Fjodor; Klaasen, Heinrich; Kübarsepp, Jakob; Preis, IrinaInternational journal of materials & product technology2011 / p. 140-163 : ill

Fatigue performance of carbide compositesKlaasen, Heinrich; Kübarsepp, Jakob; Preis, Irina; Sergejev, FjodorEURO PM2005 : congress & exhibition : 2-5 October 2005, Prague, Czech Republic : proceedings. Volume 12005 / p. 323-328 : ill

Fatigue strength prediction of carbide composites by considering pores to be equivalent to small defects : effect of hot isostatic pressingSergejev, Fjodor; Preis, Irina; Kübarsepp, JakobBook of abstracts : International Symposium on Fatigue Design and Material Defects : Trondheim, Norway, 23-25 May 20112011 / p. 41-42

Feedback control of a coupled IPMC (Ionic Polymer-Metal Composite) sensor-actuatorHunt, Andres; Tan, Xiaobo; Chen, Zheng; Kruusmaa, MaarjaProceedings of ASME Dynamic Systems Control Conference : California, USA, 12-14.10.20092009 / ? p https://asmedigitalcollection.asme.org/DSCC/proceedings/DSCC2009/48920/485/346423

Foreign object induced fiber undulation influence on mechanical properties of composite laminateHerranen, Henrik; Lend, Henri; Kuusik, Alar; Czichon, Steffen; Kers, Jaan; Piirlaid, MarkoInternational Conference on Composite Materials 2013 (ICCM-19) : Montreal, Quebec, Canada, 28 July-2 August 2013 : [proceedings]2013 / p. 837-844

Formation of microstructure of spray fused powder coatingsPihl, Toomas; Kulu, PriitProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 201-204 : ill

Fracture mechanism of dispersion-strengthened Cu-Al2O3 nanosystemBesterci, Michal; Kulu, PriitActa metallurgica Slovaca2012 / p. 76-81 : ill https://www.researchgate.net/publication/289140286_Fracture_mechanism_of_dispersion-strengthened_Cu-Al2O3_nanosystem

Free vibration analysis of a functionally graded material beam : evaluation of the Haar wavelet methodKirs, Maarjus; Karjust, Kristo; Aziz, Imran; Õunapuu, Erko; Tungel, ErnstProceedings of the Estonian Academy of Sciences2018 / p. 1-9 : ill https://doi.org/10.3176/proc.2017.4.01 http://www.ester.ee/record=b2355998*est Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Friction and wear of fiber reinforced polyimide compositesZhao, Gai; Hussainova, Irina; Antonov, Maksim; Wang, Qihua; Wang, TingmeiWear2013 / p. 122-129 : ill

Friction and wear of fiber reinforced polyimide compositesZhao, Gai; Hussainova, Irina; Antonov, Maksim; Wang, Qihua; Wang, Tingmei; Veinthal, Renno19th International Conference on Wear of Materials : Portland, Oregon, USA, 14-18 April 2013 : conference abstracts2013 / [p. 92]

Functionalization of alumina nanofibers with metal oxides = Alumiiniumoksiidnanokiudude funktsionaliseerimine metalloksiididegaAghayan, Marina2016 http://www.ester.ee/record=b4560629*est

Functionally gradient Ti6Al4V-TiB composite produced by spark plasma sinteringLiu, Le; Ivanov, Roman; Kumar, Rahul, 1993-; Minasyan, Tatevik; Antonov, Maksim; Hussainova, IrinaIOP conference series : materials science and engineering2021 / art. 012004, 6 p.: ill https://doi.org/10.1088/1757-899X/1140/1/012004

The galvanostatic co-deposition of 3D-grown Ni-rGO nanocomposite : redox enhancement through reduction, texture, and morphology : oral presentationAlinejadian, Navid; Nasirpouri, FarzadGraphene Summit 2021 : Global Virtual Summit on Carbon, Graphene, 0D, 1D, and 2D materials, July 22-23, 2021, Beaverton, Oregon, United States of America : online2021 / p. 2 https://re.public.polimi.it/retrieve/handle/11311/1180988/644510/Global%20virtual%20summit%20on%20Carbon%2C%20graphene%20...%20-%2022-23.07.2021%20-%20Program.pdf

Graphene covered alumina nanofibers as toughening agent in alumina ceramicsHussainova, Irina; Drozdova, Maria; Aghayan, Marina; Ivanov, Roman; Perez-Coll, Domingo13th International Ceramics Congress. Part B2014 / p. 49-53

Graphene-encapsulated aluminium oxide nanofibers as a novel type of nanofillers for electroconductive ceramicsIvanov, Roman; Hussainova, Irina; Aghayan, Marina; Drozdova, Maria; Perez-Coll, Domingo; Rodriguez, Miguel Angel; Rubio-Marcos, FernandoJournal of the European Ceramic Society2015 / p. 4017-4021 : ill http://dx.doi.org/10.1016/j.jeurceramsoc.2015.06.011

Hardness of multi wall carbon nanotubes reinforced aluminium matrixBradbury, Christopher R.; Gomon, Jaana-Kateriina; Kollo, Lauri; Kwon, Hansang; Leparoux, MarcJournal of alloys and compounds2014 / p. 362-367 : ill

Hierarchically structured functional ceramic composites with graphene augmented nanofibers = Hierarhiliselt struktureeritud funktsionaalsed keraamilised komposiidid grafeenlisandiga nanokiududegaSaffarshamshirgar, Ali2021 https://www.ester.ee/record=b5453046*est https://digikogu.taltech.ee/et/Item/13881820-10e9-4116-bf2c-440a4c2f7b9b https://doi.org/10.23658/taltech.42/2021

High energy milling of WС-FeСr cemented carbideTarraste, Marek; Kübarsepp, Jakob; Juhani, Kristjan; Kolnes, Märt; Viljus, MartModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 136-141 : ill https://www.scientific.net/KEM.799.136 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.136 Conference proceeding at Scopus Article at Scopus

High pressure high temperature consolidation of ZrC based ceramic compositesMinasyan, Tatevik; Aydinyan, Sofiya; Liu, Lei; Cygan, Slawomir; Hussainova, Irina[2018 World Congress on Powder Metallurgy (WORLDPM2018), Beiijing, China, 16-18 September 20182018 / p. [515–518] : [USB]

High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applicationsMaity, Tapabrata; Balci, Özge; Gammer, C.; Ivanov, E.; Eckert, Jürgen; Prashanth, Konda GokuldossJournal of the mechanical behavior of biomedical materials2020 / art. 103839, 10 p. : ill https://doi.org/10.1016/j.jmbbm.2020.103839 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

High strength ductile aluminium matrix composite = Kõrgtugev ja plastne alumiiniumkomposiitmaterjalKallip, Kaspar2017 https://digi.lib.ttu.ee/i/?9114

High temperature tribological performance of adaptive hard nanocomposite coatings deposited on a WC-Co substrateAlamgir, Asad; Bogatov, Andrei; Yashin, Maxim; Viljus, Mart; Sondor, J.; Podgurski, VitaliGSFMT Scientific Conference 2020 : Tallinn, February 4-5, 2020 : abstracts2020 / p. 12 http://fmtdk.ut.ee/wp-content/uploads/2020/01/GSFMT2020.pdf

Highlight of photocurrent generation in garbon-based nanohybrids combined with HfO2 nanoparticlesRauwel, Protima; Galeckas, Augustinas; Ducroquet, Frederiquet; Rauwel, Erwan5th International Conference on Competitive Materials and Technology Processes : Miskolc-Lillafüred, Hungary, October 8-12, 2018 : book of abstracts2018 / p. 166 https://www.ic-cmtp5.eu/doc/book_of_abstract_iccmtp5.pdf

Hot and cold of pressing effect on ECAP-parallel channel composite based on Al/ANF materialPramono, Agus; Kommel, Lembit; Kollo, Lauri; Veinthal, RennoAdvanced materials research2015 / p. 343-347 http://dx.doi.org/10.4028/www.scientific.net/AMR.1123.343

Hot and cold regions during accumulative roll bonding of Al/Al2O3 nanofibre compositesPramono, Agus; Kollo, Lauri; Veinthal, RennoProceedings of the Estonian Academy of Sciences2016 / p. 132-137 : ill

Hot consolidation of aluminum and aluminum nano-MMC powders by Equal Channel Angular PressingKollo, Lauri; Kallip, Kaspar; Gomon, Jaana-Kateriina; Kommel, LembitMaterials science = Medžiagotyra2012 / p. 234-237 : ill https://www.researchgate.net/publication/267226658_Hot_Consolidation_of_Aluminium_and_Aluminium_nano-MMC_Powders_by_Equal_Channel_Angular_Pressing

Hot sliding wear of 88 wt.%TiB-Ti composites from SHS produced powdersKumar, Rahul, 1993-; Liu, Le; Antonov, Maksim; Ivanov, Roman; Hussainova, IrinaMaterials2021 / art. 1242, 14 p.: ill https://doi.org/10.3390/ma14051242 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Hybrid graphene/alumina nanofibers for electrodonductive zirconiaDrozdova, Maria; Perez-Coll, Domingo; Aghayan, Marina; Ivanov, Roman; Rodriguez, Miguel Angel; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 15-20 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.15

Hybrid nanocomposites and ultrastable metal nanoparticles studied for the development of applications in nanomedicine, water purification and energy harvestingRauwel, Erwan; Rauwel, Protima; Küünal, Siim; Volobujeva, Olga; Ivask, Angela; Galeckas, Augustinas; Duqroquet, F.; Wragg, DavidEMN Meeting on Nanoparticles 2017 : May 9th to 13th, 2017 in San Sebastian, Spain2017 / [1] p

Hybrid syntactic foams of metal - fly ash cenosphere - clayShishkin, Andrei; Mironovs, Viktors; Zemchenkov, Vjacheslav; Antonov, Maksim; Hussainova, IrinaEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 35-40 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.35

Impact of alkali and silane treatment on hemp/PLA composites’ performance : from micro to macro scaleAlao, Percy Festus; Marrot, Laetitia; Burnard, Michael David; Lavrič, Gregor; Saarna, Mart; Kers, JaanPolymers2021 / art. 851, 18 p. : ill https://doi.org/10.3390/polym13060851 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Impact pressure on mechanical properties of aluminum based composite by ECAP-parallel channelPramano, Agus; Dhoska, Klodian; Markja, Irida; Kommel, LembitPollack periodica2019 / p. 67–74 https://doi.org/10.1556/606.2019.14.1.7 Journal metrics at Scopus Article at Scopus

Implications of the negative capacitance observed at forward bias in nanocomposite and polycrystalline solar cellsMora-Sero, Ivan; Bisquert, Juan; Oja Acik, IlonaNano letters2006 / 4, p. 640-650 https://pubs.acs.org/doi/10.1021/nl052295q

Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutionsAlinejadian, Navid; Kazemi, Sayed Habib; Grossberg-Kuusk, Maarja; Kollo, Lauri; Odnevall, Inger Charlotta; Prashanth, Konda GokuldossMaterials today chemistry2022 / art. 101219 https://doi.org/10.1016/j.mtchem.2022.101219 Journal metrics at Scopus Article at Scopus Journalmetrics at WOS Article at WOS

In situ Mo(Si,Al)2-based composite through selective laser melting of a MoSi2-30 wt.% AlSi10Mg mixtureMinasyan, Tatevik; Aydinyan, Sofiya; Toyserkani, Ehsan; Hussainova, IrinaMaterials2020 / art. 3720 ; 13 p https://doi.org/10.3390/ma13173720 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Induction brazing of cermets to steel and eddy current testing of joint qualityLaansoo, Andres; Kübarsepp, Jakob; Surženkov, Andrei; Land, Raul; Märtens, Olev; Viljus, MartWelding in the World2020 / p. 563−571 https://doi.org/10.1007/s40194-020-00854-x Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Industrial approach to circularity of polymer composites : processing, characterization, mechanical testing, and wear regressionHussain, Abrar; Podgurski, Vitali; Goljandin, Dmitri; Antonov, MaksimJournal of reinforced plastics and composites2023 / 17 p. : ill https://doi.org/10.1177/07316844231164563

The influence of accelerated weathering on the mechanical and physical properties of wood-plastic compositesKallakas, Heikko; Poltimäe, Triinu; Süld, Tiia-Maaja; Kers, Jaan; Krumme, AndresProceedings of the Estonian Academy of Sciences2015 / p. 94-104 : ill https://doi.org/10.3176/proc.2015.1S.05

Influence of binder composition and microhardness on wear properties of light weight compositesKommel, Lembit; Traksmaa, Rainer; Kimmari, EduardPowder metallurgy progress2003 / 3, p. 140-145 : ill https://www.researchgate.net/publication/269035885_Influence_of_binder_composition_and_microhardness_on_wear_properties_of_light_weight_composites

The influence of birch (Betula pendula) false heartwood on the mechanical properties of wood-plastic composites = Kase (Betula pendula) väärlülipuidu mõju puitplastkomposiitide mehaanilistele omadusteleKallakas, Heikko2019 https://digi.lib.ttu.ee/i/?12253

Influence of birch false heartwood on the physical and mechanical properties of wood-plastic compositesKallakas, Heikko; Ayansola, Gbenga; Tumannov, Tanel; Goljandin, Dmitri; Poltimäe, Triinu; Krumme, Andres; Kers, JaanBioresources2019 / p. 3554-3566 : ill https://doi.org/10.15376/biores.14.2.3554-3566 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose compositesŠumigin, Dmitri; Tarasova, Elvira; Meier, PilleProceedings of the 6th meeting of the Nordic-Baltic Network in Wood Material Science and engineering (WSE) : October 21-22, 2010, Tallinn, Estonia2010 / p. 187

Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose compositesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Meier, Pille11th International Conference on Wood & Biofiber Plastic Composites & Nanotechnology in Wood Composites Symposium, May 16-18, Madison, USA2011 / p. 51

Influence of cellulose content on thermal properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose compositesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Viikna, AntiProceedings of the Estonian Academy of Sciences2012 / p. 237-244 : ill https://artiklid.elnet.ee/record=b2535727*est

Influence of cellulose stearate (CS) content on thermal and rheological properties of poly(lactic acid)/CS compositesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Viikna, AntiBaltic Polymer Symposium2013 / p. 99-104

Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite nACo coating during running-inSurženkov, Andrei; Podgurski, Vitali; Viljus, Mart; Adoberg, Eron; Nanits, Mats-Maidu; Kulu, Priit; Veinthal, RennoMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 26

Influence of filler proportion on mechanical and physical properties of particulate compositeAruniit, Aare; Kers, Jaan; Tall, KasparAgronomy research2011 / p. 23-29 : ill

Influence of hollow glass microspheres on the mechanical and physical properties and cost of particle reinforced polymer compositesAruniit, Aare; Kers, Jaan; Majak, Jüri; Krumme, Andres; Tall, KasparProceedings of the Estonian Academy of Sciences2012 / p. 160-165 : ill https://artiklid.elnet.ee/record=b2535363*est

Influence of interphases on the mechanical properties of alumina nanofibers reinforced alumina nanocompositeAghayan, Marina; Hussainova, Irina; Gasik, Michael; Kollo, LauriProceedings of the 1st ISN2A, 1st International Symposium on Nanoparticles/Nanomaterials and Applications : Caparica - Almada, Portugal, 20th-22th January 20142014 / p. 97

Influence of microstructure and chemical composition on toughness and wear resistance of carbide compositesPetrov, MihhailTÜ ja TTÜ doktorikool "Funktsionaalsed materjalid ja tehnoloogiad" : 04.-05. märts 2014, Tartu2014 / [1] p. : ill

Influence of microstructure and strengthening mechanism of AlMg5-Al2O3 nanocomposites prepared via spark plasma sinteringBabu, N. Kishore; Kallip, Kaspar; Leparoux, MarcMaterials & design2016 / p. 534-544 : ill http://dx.doi.org/10.1016/j.matdes.2016.01.138

Influence of preparation process on morphology and conductivity of carbon black-based electrospun nanofibersTarasova, Elvira; Byzova, Arina; Savest, Natalja; Viirsalu, Mihkel; Gudkova, Viktoria; Märtson, Triin; Krumme, AndresFullerenes, nanotubes and carbon nanostructures2015 / p. 695-700 : ill http://dx.doi.org/10.1080/1536383X.2014.974090

Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutecticsMaity, Tapabrata; Prashanth, Konda Gokuldoss; Balci, ÖzgeInternational journal of plasticity2018 / p. 121-136 : ill https://doi.org/10.1016/j.ijplas.2018.05.012 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Integrated product development and production technology of large composite plastic products = Suuregabariidiliste komposiidist plastdetailide tootearenduse metoodika ja valmistustehnoloogiadKarjust, Kristo2008 https://www.ester.ee/record=b2385493*est

Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcementsXi, Lixia; Ding, Kai; Gu, Dongdong; Guo, Shuang; Cao, Mengzhen; Zhuang, Jie; Lin, Kaijie; Okulov, Ilya; Sarac, Baran; Eckert, Jürgen; Prashanth, Konda GokuldossJournal of alloys and compounds2021 / art. 159436, 9 p.: ill https://doi.org/10.1016/j.jallcom.2021.159436 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Investigation and design of shallow wooden and composite shell-cable roofsÕiger, KarlProceedings of the Estonian Academy of Sciences. Engineering2002 / 2, p. 84-100 : ill

Investigation of Devulcanised Crumb Rubber Milling and Deagglomeration in Disintegrator SystemLapkovskis, Vjaceslavs; Mironovs, Viktors; Irtiseva, Kristine; Goljandin, Dmitri; Shishkin, AndreiKey engineering materials2019 / p. 216−220 https://doi.org/10.4028/www.scientific.net/KEM.800.216 Conference proceeding at Scopus Article at Scopus

Investigation of different carbon nanotube reinforcements for fabricating bulk AlMg5 matrix nanocompositesKallip, Kaspar; Leparoux, Marc; AlOgab, Khaled A.Journal of alloys and compounds2015 / p. 710-718 : ill http://dx.doi.org/10.1016/j.jallcom.2015.06.169

Investigation of different carbon nanotube reinforcements for fabricating bulk AlMg5 matrix nanocomposites [Online resource]Kallip, Kaspar; Leparoux, Marc; AlOgab, Khaled A.Tartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märts 2017, Tartu : teesid]2017 / [1] p http://fmtdk.ut.ee/teesid/

Investigation of the high temperature dry sliding wear behavior of graphene nanoplatelets reinforced aluminum matrix compositesSeçkin, Martin; Kandemir, Sinan; Antonov, MaksimJournal of composite materials2021 / 13 p. : ill https://doi.org/10.1177/0021998320979037 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Investigations of structure and tribological properties of the lightweight c-BN-based compositesKommel, Lembit; Kimmari, EduardMaterials science = Medžiagotyra2005 / 4, p. 394-397 : ill

Ionic liquids as solvents for making composite materials from celluloseElhi, Fred; Aid, Tiina; Koel, MihkelProceedings of the Estonian Academy of Sciences2016 / p. 255-266 : ill http://dx.doi.org/10.3176/proc.2016.3.09

Isothermal oxidation of SLM fabricated Mo(Si1-xAlx)2-based compositeMinasyan, Tatevik; Liu, Le; Toyserkani, Ehsan; Hussainova, IrinaIOP conference series : materials science and engineering2021 / art. 012003, 8 p.: ill https://doi.org/10.1088/1757-899X/1140/1/012003

Joogikõrsi valmistav Sutu leidis pilliroole veelgi nutikama kasutuse – Põhjamaade bambusest tehakse ka sööginõusid ja kosmeetikapakendeid [Võrguväljaanne]rohe.geenius.ee2022 Joogikõrsi valmistav Sutu leidis pilliroole veelgi nutikama kasutuse – Põhjamaade bambusest tehakse ka sööginõusid ja kosmeetikapakendeid

K2CO3-containing composite sorbents based on a ZrO2 aerogel for reversible CO2 capture from ambient airVeselovskaya, Janna; Derevshchikov, Vladimir; Shalygin, Anton S.; Yatsenko, DmitryMicroporous and Mesoporous Materials2021 / art. 110624 https://doi.org/10.1016/j.micromeso.2020.110624 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Karbiidkomposiitide abrasiiv-erosioon- ja hõõrdekulumineVainola, Vello; Kübarsepp, Jakob; Klaasen, Heinrich; Loel, ReinTallinna Tehnikakõrgkooli Toimetised2004 / lk. 66-71 : ill

Keskkonnasõbralike komposiitmaterjalide kasutusvõimalused väikelaevaehituses ning vee mõju nende tugevusomadusteleMalmstein, MariKeskkonnatehnika2011 / 2, lk. 28-31 : ill

KomposiitkonstruktsioonidLoorits, Kalju; Parts, Aldur2003 https://www.ester.ee/record=b1821878*est

Komposiitkonstruktsioonid. Osa 1, Hoonete komposiitkonstruktsioonide projekteerimise üldeeskirjad : Eesti projekteerimisnormid, EPN-ENV 4.1.1 : (eelnõu) : välja antud veebruar 1997Loorits, KaljuET-kartoteek : Eesti ehitusteave. ET-11997 / ET-1 0113-0176, 58 lk

KomposiitmaterjalidArensburger, Daniil2005 http://www.ester.ee/record=b2033458*est

KomposiitmaterjalidArensburger, Daniil; Kulu, Priit1996 https://www.ester.ee/record=b1071342*est

Komposiitmaterjalid : täienduskursus : november 2007 - jaanuar 2008Veinthal, Renno2008 https://www.ester.ee/record=b4652765*est

Komposiitplastist toodete valmistustehnoloogiad ja tootmisjäätmete ringlussevõttKers, JaanKeskkonnatehnika2008 / 5, lk. 18-22 : ill

Kõrgtehnoloogilised pulberkomposiitmaterjalid ja -pinded tööks kulumise tingimustesKulu, Priit; Kübarsepp, JakobTeaduse uued suunad : materjaliteadus : Eesti Teaduste Akadeemia seminari materjalid : 23.10.20032004 / lk. 31-37 : ill

Laser powder-bed fusion of Mo(Si,Al)2 – based composite for elevated temperature applicationsMinasyan, Tatevik; Ivanov, Roman; Toyserkani, Ehsan; Hussainova, IrinaJournal of alloys and compounds2021 / art. 161034 https://doi.org/10.1016/j.jallcom.2021.161034 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Lattice of MoSi2/Si3N4 by selective laser meltingMinasyan, Tatevik; Liu, Le; Aydinyan, Sofiya; Kollo, Lauri; Aghayan, Marina; Hussainova, IrinaEuropean Powder Metallurgy Association : proceedings : 14 – 18 October 2018, Bilbao, Spain2018 / art. 3993050 [USB] https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-proceedings-usb

Layered functionally graded alumina ceramic compositesDrozdova, Maria; Ivanov, Roman; Rodriguez, Miguel Angel; Hussainova, IrinaECerS 2017 : 15th Conference & Exhibition of the European Ceramic Society, July 9–13, 2017, Budapest, Hungary : Book of abstracts2017 / p. 227 https://static.akcongress.com/downloads/ecers/ecers2017-abstract-book.pdf

Linear modeling of elongated bending EAP actuator at large deformationsMust, Indrek; Anton, Mart; Kruusmaa, Maarja; Aabloo, AlvoProceedings of SPIE2009 / Electroactive Polymer Actuators and Devices (EAPAD) 2009, p. 728723-1 - 728723-12 : ill https://www.researchgate.net/publication/236115802_Linear_modeling_of_elongated_bending_EAP_actuator_at_large_deformations

A linked manipulator with ion-polymer metal composite (IPMC) joints for soft- and micromanipulationKruusmaa, Maarja; Hunt, Andres; Punning, Andres; Anton, Mart; Aabloo, Alvo2008 IEEE International Conference on Robotics and Automation : Pasadena, CA, 19-23 May 2008. Vols. 1-92008 / p. 3588-3593

Loodusest inspireeritud uued komposiitmaterjalidAntonov, MaksimHorisont2019 / lk. 16-17 : fot http://www.ester.ee/record=b1072243*est

Low temperature, spark plasma sintering behavior of zirconia added by a novel type of alumina nanofibersVoltšihhin, Nikolai; Rodriguez, Miguel Angel; Hussainova, Irina; Aghayan, MarinaCeramics international2014 / p. 7235-7244 : ill

Magnesio-carbothermal reduction of CuWo4/MeO nanostructured precursors & synthesis of W/Cu composite materialsZakaryan, Marieta; Kirakosyan, Hasmik; Abovyan, L.; Aydinyan, Sofiya; Kharatyan, SurenChemical Journal of Armenia2017 / p. 450-461 http://chemistry.asj-oa.am/id/eprint/7826

Magnetic assisted sorption technology for advanced removal and recovery of phosphorus from mainstream and side-stream WWTPIvanova Drenkova-Tuhtan, Asya; Meyer, Carsten; Mandel, Karl; Schneider, MichaelIWA Nutrient Removal and Recovery Conference 18-21 November 2018, Brisbane, Australia2018 / p. 5 : ill "IWA"

Manufacturability and deformation studies on a novel metallic lattice structure fabricated by Selective Laser MeltingBaskaran, Jagadeesh; Muthukannan, Duraiselvam; Shukla, Riddhi; Prashanth, Konda GokuldossVacuum2024 / art. 113065 https://doi.org/10.1016/j.vacuum.2024.113065

Manufacturing of silicon – Bioactive glass scaffolds by selective laser melting for bone tissue engineeringRodrigo-Vazquez, C. Sara; Kamboj, Nikhil Kumar; Aghayan, Marina; Saez, Ada; De Aza, Antonio de; Rodriguez, Miguel Angel; Hussainova, IrinaCeramics international2020 / p. 26936-26944 : ill https://doi.org/10.1016/j.ceramint.2020.07.171 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Manufacturing of steered fiber composite laminateHaavajõe, Anti; Mikola, Madis; Herranen, Henrik; Pohlak, MeelisProceedings of the 10th International Conference of DAAAM Baltic Industrial Engineering, 12-13th May 2015, Tallinn, Estonia2015 / p. 21-26 : ill

Material characterization for laminated glass composite panelVäer, Kaur; Anton, Johan; Klauson, Aleksander; Eerme, Martin; Õunapuu, Erko; Tšukrejev, PavelJournal of achievements in materials and manufacturing engineering2017 / p. 11-17

Mechanical and physical properties of hemp fiber-mat reinforced polyethylene film compositesYang, Xuejian; Kallakas, Heikko; Kers, JaanBiocomp 2016 : the 13th Pacific Rim Bio-Based Composite Symposium, Bio-Based Composites for the Sustainable Future : November 14th to 16th, 2016, Concepcion, Chile : abstracts2016 / p. 91 : ill http://publicaciones.udt.cl/wp-content/uploads/2017/05/Abstracts-Biocomp-2016-2.pdf

Mechanical and physical properties of silane crosslinked wood flour reinforced compositesKallakas, Heikko; Shamim, M. A.; Poltimäe, Triinu; Süld, Tiia-Maaja; Krumme, Andres; Kers, JaanProceedings of the 11th Meeting of the Northern European Network for Wood Sciences and Engineering (WSE) : September 14-15, 2015, Poznan, Poland2015 / p. 278

Mechanical and physical properties of thermally modified wood flour reinforced polypropylene compositesKallakas, Heikko; Martin, M.; Goljandin, Dmitri; Poltimäe, Triinu; Krumme, Andres; Kers, JaanAgronomy research2016 / p. 994-1003 : ill http://ise.elnet.ee/record=b2891902~S1*est

Mechanical and physical properties of thermally modified wood flour reinforced polypropylene composites [Online resource]Kallakas, Heikko; Poltimäe, Triinu; Krumme, Andres; Kers, JaanTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märts 2017, Tartu : teesid]2017 / [1] p http://fmtdk.ut.ee/teesid/

Mechanical and structural characterization of multiphase B4C/Al composites synthesized by SHSKimmari, Eduard; Kommel, Lembit15th International Baltic Conference "Engineering Materials & Tribology. Baltmattrib - 2006" : October 5-6, 2006, Tallinn, Estonia : abstracts2006 / p. 33-34

Mechanical characterization and modeling of chromium carbide based compositesJasiuk, Iwona; Hussainova, Irina; Hamed, ElhamProceedings of 16th International Conference on Mechanics of Composite Materials : MCM 2010 : May 24-28, Riga, Latvia2010

Mechanical disintegration of Al-W-B waste materialShishkin, A.; Mironov, V.; Goljandin, Dmitri; Lapkovsky, V.World PM2010 proceedings. Vol. 2, Sintering, Secondary and Finishing Operations, Full Density and Alternative Consolidation2010 / p. 597-601 https://www.researchgate.net/publication/290520673_Mechanical_disintegration_of_Al-W-B_waste_material

Mechanical properties and self-healing capacity of ultra high performance fibre reinforced concrete with alumina nano-fibres : tailoring ultra high durability concrete for aggressive exposure scenariosCuenca, Estefania; D'Ambrosio, Leonardo; Lizunov, Dennis; Tretjakov, Aleksei; Volobujeva, Olga; Ferrara, LiberatoCement and concrete composites2021 / art. 103956, 17 p https://doi.org/10.1016/j.cemconcomp.2021.103956 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Mechanically activated synthesis of ZrC nanopowders to produce composites with TiC and Mo additivesYung, Der-Liang; Kollo, Lauri; Hussainova, Irina; Zikin, ArkadiECOTRIB 2011 : 3rd European Conference on Tribology and 4th Vienna International Conference on Nano-Technology : June 7-9, 2011, Vienna, Austria. 22011 / p. 793-796

Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy compositesMaity, Tapabrata; Prashanth, Konda Gokuldoss; Janda, AlexanderJournal of materials research2019 / p. 2672-2682 : ill https://doi.org/10.1557/jmr.2019.149 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Metal powder/fly ash cenosphere/modified clay compositeŠiškins, Andrejs; Mironovs, Viktors; Zemčenkovs, Vjačeslavs; Hussainova, IrinaEuro PM2014 proceedings : PM Functional Materials2014

Metal-coated cenospheres obtained via magnetron sputter coating : a new precursor for syntactic foamsShishkin, A.; Hussainova, Irina; Kozlov, V.; Lisnanskis, M.; Leroy, P.; Lehmhus, D.JOM : the journal of the minerals, metals & materials society2018 / p. 1319-1325 : ill https://doi.org/10.1007/s11837-018-2886-0 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Metallmaatrikskomposiitmaterjalid triboloogias : avalik loeng 3. mail 2007 TTÜsVeinthal, RennoTallinna Tehnikaülikooli aastaraamat 20072008 / lk. 326-331 : ill

Methods for fibre orientation analysis of X-ray tomography images of steel fibre reinforced concrete (SFRC)Herrmann, Heiko; Pastorelli, Emiliano; Kallonen, Aki; Suuronen, Jussi-PetteriJournal of materials science2016 / p. 3772-3783 : ill http://dx.doi.org/10.1007/s10853-015-9695-4

Micro-scale studies of wear of composite materialsHussainova, IrinaThe 4th Nordic-Baltic SPM Workshop, Tartu, Estonia, May 29-31, 2002 : abstract book2002 / p. 27-28

Microstructural and mechanical characteristics of in situ synthesized chromium-nickel-graphite compositesPirso, Jüri; Viljus, Mart; Letunovitš, Sergei; Juhani, KristjanExtended abstracts of 2006 Powder Metallurgy World Congress : Busan, Korea, September 24-28. 12006 / p. 631-632

Microstructural and mechanical characteristics of in situ synthesized chromium-nickel-graphite compositesPirso, Jüri; Viljus, Mart; Letunovitš, Sergei; Juhani, KristjanMaterials science forum2007 / Progress in powder metallurgy, p. 1209-1212 : ill https://www.scientific.net/MSF.534-536.1209

Microstructural aspects of ceramic-metal composites performance in erosive mediaHussainova, Irina; Antonov, Maksim; Volobujeva, OlgaAdvances in science and technology2006 / 11th International Ceramic Congress, p. 132-141 : ill

Microstructural aspects of thermal sprayed WC-Co coatings and Ni-Cr coated steels = WC-Co termopinnete ja Ni-Cr pinnatud teraste metallograafilised aspektidPeetsalu, Priidu2007 https://www.ester.ee/record=b2315917*est

Microstructural design of ceramic-metal composites for tribological applicationsHussainova, IrinaAdvances in composite materials and structures2007 / p. 125-128 : ill

Microstructural design of ceramic-metal composites for tribological applicationsHussainova, IrinaAbstract book of the 5th Asian-Australian Conference on Composite Materials : ACCM-5 : 27-30 November, 2006, Hong-Kong2006 / p. 16-17

Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix compositeBandil, Kapil; Vashisth, Himanshu; Kumar, Sourav; Singh, NeeraJournal of composite materials2019 / p. 4215–4223 : ill https://doi.org/10.1177/0021998319856679 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Microstructure and erosive wear in ceramic-based compositesHussainova, IrinaWear2005 / p. 357-365 : ill

Microstructure and mechanical characterization of WC-based composites doped by zirconiaHussainova, Irina; Kimmari, Eduard; Kollo, Lauri; Jasiuk, IwonaProceedings of 16th International Conference on Mechanics of Composite Materials : MCM 2010 : May 24-28, Riga, Latvia2010

Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgyKallip, Kaspar; Babu, N. Kishore; AlOgab, Khaled A.; Kollo, Lauri; Maeder, Xavier; Arroyo, Yadira; Leparoux, MarcJournal of alloys and compounds2017 / p. 133-143 : ill https://doi.org/10.1016/j.jallcom.2017.04.233

Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix compositesXie, M.S.; Wang, Zhi; Prashanth, Konda GokuldossJournal of alloys and compounds2020 / art. 152317, 6 p. : ill https://doi.org/10.1016/j.jallcom.2019.152317 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloyingSokkalingam, Rathinavelu; Tarraste, Marek; Surreddi, Kumar Babu; Traksmaa, Rainer; Muthupandi, Veerappan; Sivaprasad, Katakam; Prashanth, Konda GokuldossMaterial design & processing communications2020 / 9 p. : ill https://doi.org/10.1002/mdp2.175 Journal metrics at Scopus Article at Scopus

Microstructure and superconductivity of bulk BPSCCO/LPMO compositeStoyanova-Ivanova, Angelina; Staneva, Anna; Shoumarova, Janna; Blagoev, Blagoy; Zaleski, Andrzej; Mikli, Valdek; Dimitriev, YankoPhilosophical magazine letters2011 / p. 190-199 : ill

Microstructure evolution and changes in mechanical properties in WC-Co composites during recycling by oxidation-reduction process and sinteringJoost, Renee; Pirso, Jüri; Viljus, Mart18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 29

Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al2O3 nanocompositesBabu, N. Kishore; Kallip, Kaspar; Leparoux, MarcTMS 2016 : 145 Annual Meeting & Exhibition : supplemental proceedings2016 / p. 729-736 : ill http://dx.doi.org/10.1007/978-3-319-48254-5_87

Microstructure evolution and tensile property of high entropy alloy particle reinforced 316 L stainless steel matrix composites fabricated by laser powder bed fusionZhang, Xinqi; Yang, Dongye; Jia, Yandong; Wang, Gang; Prashanth, Konda GokuldossJournal of alloys and compounds2023 / art. 171430 https://doi.org/10.1016/j.jallcom.2023.171430

Microstructure evolution of TiC cermets with ferritic AISI 430L steel binderKolnes, Märt; Mere, Arvo; Kübarsepp, Jakob; Viljus, Mart; Maaten, Birgit; Tarraste, MarekPowder metallurgy2018 / p. 197-209 : ill https://doi.org/10.1080/00325899.2018.1447268 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusionXi, Lixia; Feng, Lili; Gu, Dongdong; Prashanth, Konda Gokuldoss; Kaban, Ivan; Wang, Ruiqi; Xiong, Ke; Sarac, Baran; Eckert, JürgenJournal of alloys and compounds2023 / art. 168803 https://doi.org/10.1016/j.jallcom.2023.168803

Microstructure, mechanical, and impression creep properties of AlMg5-0.5 vol% Al2O3 nanocompositesTalari, Mahesh Kumar; Babu, N. Kishore; Kallip, KasparAdvanced engineering materials2016 / p. 1958-1966 : ill http://dx.doi.org/10.1002/adem.201600301

Microstructure, wear and corrosion characteristics of Cu matrix reinforced SiC–graphite hybrid compositesJamwal, Anbesh; Prakash, Prem; Kumar, Devendra; Singh, Neera; Sadasivuni, Kishor Kumar; Harshit, Kumar; Gupta, Sumit; Gupta, PallavJournal of composite materials2019 / p. 2545 - 2553 https://doi.org/10.1177/0021998319832961 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Microtribological studies of different nanocomposite TiC/a-C:H coatings using a modified nanoidentation setupSchwaller, P.; Patscheider, J.; Kollo, Lauri; Michler, J.Tribology letters2004 / 4, p. 757-763

Mikroskoopia kujutiste ja röntgenspektrogrammide töötlemine ja rakendamine materjalide uurimisel : aruanne : G444 : teadussuuna klass 1.2, 2.2Viljus, Mart1994 https://www.ester.ee/record=b2084735*est

Mineralogical composition and strength formation of oil shale ash based building compositesRaado, Lembi-Merike; Hain, Tiina; Somelar, Peeter; Uibu, MaiInternational oil shale symposium : Tallinn, Estonia, June 10-13, 20132013 / p. 58

Modeling constitutive relation for woven polymer-based compositesMajak, Jüri; Pohlak, Meelis; Küttner, Rein; Eerme, Martin; Herranen, HenrikNATO Advanced Research Workshop : Textile Composites : May 18-22, 2009, Kiev, Ukraine2009 / [3] p

Modeling of erosion wear of powder composite materials and coatingsVeinthal, Renno; Kulu, Priit; Käerdi, HelmoSurface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria2007 / p. 129-132 : ill

Modelling and testing of the properties of recovered composite materialKers, Jaan; Goljandin, Dmitri; Tall, Kaspar; Aruniit, Aare; Adoberg, Eron; Saarna, Mart; Majak, JüriProceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14-17 September 20102010 / Paper 81 https://www.researchgate.net/publication/269140253_Modelling_and_Testing_of_the_Properties_of_Recovered_Composite_Material

Modelling of erosion wear of powder composite materials and coatings [Electronic resource]Veinthal, Renno; Kulu, PriitProceedings of 15th IFHTSE and 20 SMT Congress : September 2006, Vienna2006 / [CD-ROM]

Modelling of impact-abrasive wear of ceramic, metallic, and composite materialsRahmani Ahranjani, Ramin; Antonov, Maksim; Kamboj, Nikhil KumarProceedings of the Estonian Academy of Sciences2019 / p. 191–197 : ill https://doi.org/10.3176/proc.2019.2.11 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-191-197.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Modelling process parameters of the PA12-CF60 carbon fiber laminating tape for low cost laminating devicesHaavajõe, Anti; Mikola, Madis; Pohlak, MeelisInternational Conference of numerical analysis and applied mathematics, ICNAAM 2019, 23–28 September 2019, Rhodes, Greece2020 / art. 230006 https://doi.org/10.1063/5.0026715 Journal metrics at Scopus Article at Scopus Article at WOS

Moisture buffer value of composite material made of clay-sand plaster and wastepaperNutt, Nele; Kubjas, ArdoJournal of sustainable architecture and civil engineering2020 / p. 108−115 https://doi.org/10.5755/j01.sace.27.2.25391 Journal metrics at Scopus Article at Scopus

Molecular scale organized polyconjugated polymer-heteropolyacid compositesKulak, Anatoly; Kokorin, Alexander; Kulak, Tamara; Meissner, DieterProceedings of the Estonian Academy of Sciences2009 / 1, p. 12-17 : ill

Monograin membranes as artificial thylakoid membranes [Online resource]Samieipour, Ali; Kouhiisfahani, Elham; Morawietz, Tobias; Hiesgen, Renate; Meissner, DieterTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märts 2017, Tartu : teesid]2017 / [1] p. : ill http://fmtdk.ut.ee/teesid/

Mo(Si1-x,Alx)2-based composite by reactive laser powder-bed fusionMinasyan, Tatevik; Aydinyan, Sofiya; Liu, Le; Volobujeva, Olga; Toyserkani, Ehsan; Hussainova, IrinaMaterials letters2020 / art. 128776, 5 p. : ill https://doi.org/10.1016/j.matlet.2020.128776 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

MoSi2 based composites by selective laser meltingMinasyan, Tatevik; Liu, Le; Aydinyan, Sofiya; Hussainova, IrinaAPICAM2019 program : [abstracts]2019 / p. [218] https://www.apicam2019.com.au/LiteratureRetrieve.aspx?ID=200067

MoSi2-based composites by selective laser melting = Selektiivse lasersulatuse teel valmistatud MoSi2 baasil komposiididMinasyan, Tatevik2020 https://www.ester.ee/record=b5388072*est https://digikogu.taltech.ee/et/Item/26aa1fe6-b853-43b8-887a-51b6efa0b5ef

Multicriteria optimization of large composite partsPohlak, Meelis; Majak, Jüri; Küttner, Rein; Karjust, Kristo15th International Conference on Composite Structures ICCS 15 : University of Porto, Porto, Portugal, 15-17 June 20092009 / p. 1-2

Multifunctional, multilayered and nanostructured hard coatingsPodgurski, VitaliNanopowders, Nanostuctured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts2005 / p. 25-26

Multiphase forming in lightweight composites during SHS reactionKommel, Lembit; Kimmari, EduardMaterials science2008 / p. 242-246 : ill https://www.matsc.ktu.lt/index.php/MatSc/article/view/26220

Multiphase forming in lightweight composites during SHS reactionKommel, Lembit; Kimmari, Eduard17th International Baltic Conference : Materials Engineering 2008 : November 6-7, Kaunas, Lithuania : abstracts of papers2008 / p. 19-20 https://www.matsc.ktu.lt/index.php/MatSc/article/view/26220

Multi-scale characterization and modeling of chromium carbide based cermetsJasiuk, Iwona; Hussainova, Irina; Hamed, ElhamCharacterization of Metal Matrix Composites : Materials Science and Technology 2009 : conference and exhibition : October 25-29, 2009, Pittsburgh, Pennsylvania, USA. Vol. 32009 / p. 1775-1784

Nanoindentation testing and modeling of chromium carbide based compositesHussainova, Irina; Hamed, Elham; Jasiuk, IwonaMechanics of composite materials2011 / p. 667-678 : ill

Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidationKollo, Lauri; Bradbury, Christopher R.; Veinthal, Renno; Jäggi, Christian; Carreno-Morelli, Efrain; Leparoux, MarcMaterials science and engineering : A2011 / p. 6606-6615 : ill

New antimicrobial CU(II)-polyotungstate/polylactic acid filmsDuvanova, Ella; Krasnou, Illia; Knyzhnyk, Ivan; Radio, Serhii V.; Karpichev, YevgenGraduate School of Functional Materials and Technology (GSFMT) Scientific Conference : abstracts2022 / 15 l. Graduate School of Functional Materials and Technology (GSFMT) Scientific Conference 2022

New composite coatings on the base of recycled hardmetalsZimakov, Sergei; Tarbe, Riho; Kulu, PriitThermal Spray 2003 : proceedings of the International Thermal Spray Conference : [Orlando, Florida, 5-8 May 2003]2003 / p. 455-459

NiO and WO3 coreduction by combined reducers Mg/C and preparation of W-Ni alloy [Online resource]Zakaryan, Marieta; Aydinyan, Sofiya; Kharatyan, SurenAbstracts : 14th International Ceramics Congress2018 / CB-10.2:L03 http://2018.cimtec-congress.org/abstracts_focused_session_cb-10

Novel alumina-nanocarbon hybridsHussainova, Irina; Anoshkin, Ilya; Ivanov, Roman; Kübarsepp, Jakob38th International Conference & Exposition on Advanced Ceramics and Composites : abstract book : January 26-31, 2014, Daytona Beach, Florida2014 / p. 117

Novel approach for the preparation of shapes from TiB2-Si3N4 composite by selective laser meltingLiu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaProceedings of the Euro PM 2018 Congress : Bilbao, Spain. 14–18 October 20182018 https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-am-special-materials

Novel approach for the synthesis and sintering of TiB2-Si3N4 ceramic compositeLiu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaEuropean Powder Metallurgy Association : proceedings : 14 – 18 October 2018, Bilbao, Spain2018 / art. 3987173 [USB] https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-proceedings-usb

Novel method for producing electrospun composite nanofibre yarnsViirsalu, Mihkel; Savest, Natalja; Plamus, Tiia; Vassiljeva, Viktoria; Krumme, AndresProceedings of the Estonian Academy of Sciences2018 / p. 169-174 : ill https://doi.org/10.3176/proc.2018.2.09 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

A novel pathway of solution combustion synthesis of silicon carbide and SiC based composite whiskersKirakosyan, Hasmik; Nazaretyan, Khachik; Amirkhanyan, Narine; Beglaryan, Hayk; Aydinyan, SofiyaModern materials and manufacturing 20232024 / art. 040009 https://doi.org/10.1063/5.0189204

A novel route for the preparation of TiB2/TiN composites by selective laser sintering [Online resource]Liu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märtsil 2018, Tallinn : teesid] GSFMT Scientific Conference 2018 : Tallinn, March 7-8, 2018 : abstracts2018 / 1 p http://fmtdk.ut.ee/teesid-2018/

Novel SiOxNy composite thin films with aligned carbon nanotubes networkShmagina, Elizaveta; Mikli, Valdek; Bereznev, SergeiGSFMT Scientific Conference 2023 : Tartu, 23-24 May, 2023 : abstracts2023 https://fmtdk.ut.ee/programm-2023/

Novel SiOxNy protective coatings with aligned carbon nanotubes networkShmagina, Elizaveta; Volobujeva, Olga; Mikli, Valdek; Bereznev, SergeiSymposium E : Carbon- and/or nitrogen-containing thin films and nanomaterials : 40th Anniversary2023 / art. 00680 https://srv3.key4events.com/key4register/AbstractList.aspx?e=31&preview=1&aig=-1&ai=1968

Novel synthesized and milled carbide-based composite powders for HVOF spray = Uudsed sünteesitud ja jahvatatud karbiidide baasil komposiitpulbrid kiirleekpihustuseksSarjas, Heikki2016

Numerical simulation of two-dimensional wave propagation in functionally graded materialsBerezovski, Arkadi; Engelbrecht, Jüri; Maugin, Gerard A.European journal of mechanics - A/Solids2003 / p. 257-265 : ill

Numerical simulation of ultrasonic time reversal on defects in carbon fibre reinforced polymerLints, Martin; Salupere, Andrus; Dos Santos, SergeWave motion2020 / art. 102526, 10 p. : ill https://doi.org/10.1016/j.wavemoti.2020.102526 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Numerical simulation of wave propagation in heterogeneous and microstructured materials = Lainelevi numbriline simulatsioon heterogeensetes ja mikrostruktuuriga materjalidesBerezovski, Mihhail2010 http://www.ester.ee/record=b2604922*est

On micromechanical problems of erosive wear of particle reinforced compositesHussainova, IrinaProceedings of the Estonian Academy of Sciences. Engineering2005 / 1, p. 46-58 : ill

Optical and photosensitive properties of lamellar nanocomposites obtained by Cd intercalation of GaTeLeontie, Liviu; Evtodiev, Igor; Spalatu, NicolaeJournal of alloys and compounds2014 / p. 542-545 : ill

Optical properties of GaTe-ZnTe nanolamellae compositeSpalatu, Nicolae; Evtodiev, Igor; Caraman, IulianaEnergy procedia2015 / p. 176-182 : ill http://dx.doi.org/10.1016/j.egypro.2015.12.311

Optimal adhesion area of the glass-fiber reinforcement layerKarjust, Kristo; Pohlak, Meelis; Majak, Jüri14th European Conference on Composite Materials : 7-10 June 2010, Budapest, Hungary2010 / [10] p

Optimal adhesion measuring methods of the glass fibre reinforcement layerKarjust, Kristo; Pohlak, Meelis; Majak, JüriEstonian journal of engineering2010 / 4, p. 297-306 : ill

Optimal adhesion measuring methods of the glass-fiber reinforcement layerKarjust, Kristo; Pohlak, Meelis; Majak, JüriProceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering : 22-24th April 2010, Tallinn, Estonia. [I]2010 / p. 232-237 : ill

Optimal holder configurations for suspended glass panelsAuriemma, Fabio; Aiello, Robert25th International Congress on Sound and Vibration 2018 (ICSV 25) : Hiroshima Calling, Hiroshima, Japan , 8-12 July, 2018 : proceedings. Vol. 12018 / p. 4331-4338 http://toc.proceedings.com/40638webtoc.pdf

Optimised signal processing for nonlinear ultrasonic nondestructive testing of complex materials and biological tissues = Optimeeritud signaalitöötlus mittelineaarsete komplekssete materjalide ja bioloogiliste kudede mittepurustavaks testimiseks ultraheliga = Traitement du signal optimisé pour l'evaluation non linéaire non destructive des matériaux complexes et des tissus biologiquesLints, Martin2017 https://digi.lib.ttu.ee/i/?8437

Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditionsSurženkov, Andrei; Tarbe, Riho; Tarraste, Marek; Simson, Taavi; Viljus, Mart; Kulu, PriitEuropean Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications : 11-13 May 2016, Prague, Czech Republic, Břevnov Monastery2016 / [10] p. : ill

Optimization study of composite bathtubPohlak, Meelis; Majak, Jüri; Karjust, Kristo; Küttner, ReinProceedings of Second International Conference on Multidisciplinary Design Optimization and Applications : Gijon, Spain, 3-5 September 20082008 / p. 1-10 : ill

Orgaanilised komposiitmaterjalid : täienduskursus : 1. veebruar 2008 - 11. aprill 2008Kaps, Tiit[2008]

Orientation of short steel fibres in concrete : measuring and modelling = Metallist lühikiudude orientatsioon betoonis : mõõtmine ja modelleerimineEik, Marika2014 https://digi.lib.ttu.ee/i/?965 https://www.ester.ee/record=b3079293*est

Oxidation of spark plasma sintered ZrC-Mo and ZrC-TiC compositesYung, Der-Liang; Maaten, Birgit; Antonov, Maksim; Hussainova, IrinaInternational journal of refractory metals and hard materials2017 / p. 244-251 : ill https://doi.org/10.1016/j.ijrmhm.2017.03.019

Oxygen reduction on catalysts prepared by pyrolysis of electrospun styrene- acrylonitrile copolymer and multi-walled carbon nanotube composite fibresMooste, Marek; Kibena‑Põldsepp, Elo; Matisen, Leonard; Vassiljeva, Viktoria; Krumme, AndresCatalysis letters2018 / p. 1815–1826 : ill https://doi.org/10.1007/s10562-018-2392-6 Journal metrics at scopus Article at Scopus Journal metrics at WOS Article at WOS

Parametric study on in situ Laser powder bed fusion of Mo(Si1−x,Alx)2Minasyan, Tatevik; Aydinyan, Sofiya; Toyserkani, Ehsan; Hussainova, IrinaMaterials2020 / art. 4849, 17 p. : ill https://doi.org/10.3390/ma13214849 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Particle reinforced polymer composite’s stain resistance factorsAruniit, Aare; Kers, Jaan; Krumme, Andres; Allikas, Georg; Poltimäe, TriinuECCM15 - 15th European Conference on Composite Materials : Venice, Italy, 24-28 June 20122012 http://www.escm.eu.org/eccm15/data/assets/417.pdf

Particle reinforced polymer composites resistance to three body abrasive wearAruniit, Aare; Antonov, Maksim; Kers, Jaan; Krumme, AndresTÜ ja TTÜ doktorikool "Funktsionaalsed materjalid ja tehnoloogiad" : 04.-05. märts 2014, Tartu2014 / [1] p

Particle size and proportion influence to impact properties of particulate polymer compositeAruniit, Aare; Kers, Jaan; Krumme, Andres; Peetsalu, PriiduProceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia2014 / p. 325-330 : ill

Particulate filled composite plastic materials from recycled GFRPKers, Jaan; Goljandin, Dmitri; Saarna, Mart; Aruniit, Aare; Tall, Kaspar; Majak, JüriBaltic Polymer Symposium 2010 : Palanga, September 8-11, 2010 : programme and abstracts2010 / p. 15

Particulate filled composite plastic materials from recycled glass fibre reinforced plasticsAruniit, Aare; Kers, Jaan; Goljandin, Dmitri; Saarna, Mart; Tall, Kaspar; Majak, Jüri; Herranen, HenrikMaterials science = Medžiagotyra2011 / p. 276-281 : ill

Performance and failure of carbide composites in different wear conditionsKlaasen, Heinrich; Roosaar, Tõnu; Kübarsepp, Jakob; Tšinjan, AlekseiInternational Powder Metallurgy Congress & Exhibition : EURO PM2009 : 12th October - 14th October 2009, Copenhagen, Denmark : proceedings. Vol.12009 / p. 317-322 : ill

Performance of carbide composites in cyclic loading conditionsKlaasen, Heinrich; Kübarsepp, Jakob; Roosaar, Tõnu; Sergejev, Fjodor; Talkop, AdolfInternational Powder Metallurgy Congress & Exhibition : EURO PM2008 : 29th September - 1st October 2008, Mannheim, Germany : proceedings. Vol.12008 / p. 237-242 : ill

Performance of ceramic-metal composites as tool materials for friction stir welding = Keraamilis-metalsed komposiidid otshõõrdkeevituse tööriista materjalidenaKolnes, Mart2020 https://www.ester.ee/record=b5391663*est https://digikogu.taltech.ee/et/Item/407d051a-6584-41fe-8c27-2ddcbcd8d902

Performance of tool materials in blanking = Tööriistamaterjalide toimivus väljalõikestantsimiselTšinjan, Aleksei2012

Permeability of water and oleic acid in composite films of phase separated polypropylene and cellulose stearate blendsKrasnou, Illia; Gardebjer, Sofie; Tarasova, Elvira; Larsson, Anette; Westman, Gunnar; Krumme, AndresCarbohydrate polymers2016 / p. 450-458 : tab. https://doi.org/10.1016/j.carbpol.2016.07.016

Phase, microstructure, and wear behavior of Al2O3-reinforced Fe–Si alloy-based metal matrix nanocompositesSaxena, Akash; Singh, Neera; Singh, Bhupendra; Kumar, Devendra; Sadasivuni, Kishor Kumar; Gupta, Pallav; Kumar, DevendraProceedings of the institution of mechanical engineers part L Journal of Materials Design and Applications Journal of materials design and applications2020 / art. 146442071989338, p. 467-480 https://doi.org/10.1177/1464420719893387 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Phenomenological and numerical modelling of short fibre reinforced cementitious compositesHerrmann, Heiko; Eik, Marika; Berg, Viktoria; Puttonen, JariMeccanica2014 / p. 1985-2000 : ill

Phi 6 bacteriophage inactivation by metal salts, metal powders, and metal surfacesMolan, Katja; Rahmani Ahranjani, Ramin; Krklec, Daniel; Brojan, Miha; Stopar, DavidViruses2022 / art. 204 https://doi.org/10.3390/v14020204 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Photoelectric and photoluminescence properties of CdTe-GaTe compositeCaraman, Iuliana; Spalatu, Nicolae; Evtodiev, Igor; Untila, Dumitru; Leontie, Liviu; Caraman, MihailPhysica status solidi (b)2016 / p. 2515-2522 : ill http://dx.doi.org/10.1002/pssb.201600485

Physical-chemical interactions in NiAl-MeB2 systems intended for tribological applicationsUmanskyi, Oleksandr; Poliarus, Olena; Ukrainets, Maksym; Antonov, MaksimWelding journal2015 / p. 225-230 : ill

Plate model for multifunctional laminated glass composite panelMajak, Jüri; Pohlak, Meelis; Shvartsman, Boris; Õunapuu, Erko; Kirs, MaarjusICCS19 : 19th International Conference on Composite Structures : Sheraton Porto Hotel & Spa, 5-8 September 2016 : proceedings2016 / p. 140 http://dx.doi.org/10.15651/978-88-748-8977-8

A positively charged composite loose nanofiltration membrane for water purification from heavy metalsPeydayesh, Mohammad; Mohammadi, Toraj; Nikouzad, Sohail KordmirzaJournal of Membrane Science2020 / Art. n. 118205 https://doi.org/10.1016/j.memsci.2020.118205 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Prediction of abrasive erosion impact wear of composite hardfacingsKulu, Priit; Casesnoves, Francisco; Simson, Taavi; Tarbe, RihoMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 201-206 http://dx.doi.org/10.4028/www.scientific.net/SSP.267.201

PrefaceHerrmann, Heiko; Schnell, JürgenShort fibre reinforced cementitious composites and ceramics2019 / p. v-vi https://doi.org/10.1007/978-3-030-00868-0 Article collection metrics at Scopus Article at Scopus

Preliminary study of the influence of post curing parameters to the particle reinforced composite's mechanical and physical propertiesAruniit, Aare; Kers, Jaan; Krumme, Andres; Poltimäe, Triinu; Tall, KasparMaterials science = Medžiagotyra2012 / p. 256-261 : ill https://matsc.ktu.lt/index.php/MatSc/article/view/2435

Preparation of cellulose mix-esters and cellulose esters/MWCNT composites in ionic liquidsTarasova, Elvira; Kudrjašova, Marina; Krumme, AndresEUPOC-2013 : Polymers and Ionic Liquids, 1-5 September 2013, Gargnano, Italy2013

Processing and mechanical properties of ZrC-ZrO2 compositesVoltšihhin, Nikolai; Hussainova, Irina; Kübarsepp, Jakob; Traksmaa, RainerEngineering materials & tribology XXII2014 / p. 258-261

Processing of ZrC-TiC composites by SPSYung, Der-Liang; Hussainova, Irina; Rodriguez, Miguel Angel; Traksmaa, RainerEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 94-99 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.94

Product development problems of statically and dynamically loaded sandwich structuresPohlak, Meelis; Eerme, Martin; Küttner, ReinOST-03 Symposium on Machine Design2003 / p. 29-37 : ill

Production of superhard carbon rich boron carbon (B11.72C3.28) based composite in the B4C-Al-WC-Co-Cu system through SHS and SPS techniques [Electronic resource]Kommel, Lembit; Tarraste, Marek; Kolnes, Märt; Veinthal, Renno; Kübarsepp, JakobEuro PM2015 Congress & Exibition : proceedings : 4-7 October 2015, Reims Congress Centre, Reims, France2015 / [6] p. : ill. [USB]

Production technology elaboration and characterization of Al-MWCNT, Al-fullerenes and Al-B4C compositesKommel, Lembit; Metsvahi, Rainer; Mihhaltsenkov, M.Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 651-656 : ill

Properties of retted hemp fibres for reinforcement of compositesMarrot, Laetitia; Alao, Percy Festus; Kallakas, Heikko; Poltimäe, Triinu; Kers, Jaan; Mikli, Valdek; Mere, ArvoGSFMT Scientific Conference 2020 : Tallinn, February 4-5, 2020 : abstracts2020 / p. 13 : ill http://fmtdk.ut.ee/wp-content/uploads/2020/01/GSFMT2020.pdf

Puitplastkomposiidid taaskasutatavatest materjalidestKers, JaanKeskkonnatehnika2011 / 7, lk. 17-20 : ill

Pulbermetallurgia ja komposiitmaterjalid : loengukonspektValdma, Leo; Kübarsepp, Jakob1989 https://www.ester.ee/record=b1210599*est

Pultruding of metal powder filled glass fiber reinforced polymer compositesRummo, Henri; Veinthal, Renno; Aruniit, AareEngineering materials and tribology : selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia2016 / p. 48-53 : ill http://dx.doi.org/10.4028/www.scientific.net/KEM.674.48

Quasicrystalline composites by additive manufacturingPrashanth, Konda Gokuldoss; Scudino, SergioApplied Engineering, Materials and Mechanics III : 4th International Conference on Applied Engineering, Materials and Mechanics (4th ICAEMM 2019)2019 / p. 72-76 https://doi.org/10.4028/www.scientific.net/KEM.818.72 Conference proceeding at Scopus Article at Scopus

Raytraced images for testing the reconstruction of fibre orientation distributionsEik, Marika; Herrmann, HeikoProceedings of the Estonian Academy of Sciences2012 / p. 128-136 : ill

Reactive sintering of ZrC-TiC compositesYung, Der-Liang; Kollo, Lauri; Hussainova, Irina; Zikin, ArkadiEngineering materials and tribology2013 / p. 20-25 https://www.researchgate.net/publication/234110368_Reactive_Sintering_of_ZrC-TiC_Composites

Recycled hard metal-base wear-resistant composite coatingsKulu, Priit; Halling, JaanusJournal of thermal spray technology1998 / 2, p. 173-178: ill

Recycling of composite plastics = Komposiitplastide ringlusKers, Jaan2006 https://www.ester.ee/record=b2208721*est

Recycling of light weight B4C based compositesKommel, Lembit; Kimmari, EduardProceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia2004 / p. 199-202 : ill

Reliability of dual compounds “carbide composite+steel” produced by diffusion weldingKlaasen, Heinrich; Kübarsepp, Jakob; Laansoo, Andres; Viljus, MartInternational journal of refractory metals and hard materials2010 / 5, p. 580-586 : ill

Reprocessing technology of composite plastic scrap and properties of materials from recycled plasticsKers, Jaan; Kulu, Priit; Goljandin, Dmitri; Mikli, ValdekProceedings of the Estonian Academy of Sciences. Engineering2007 / 2, p. 105-116 : ill

Reuse of reinforced acrylic plastic waste in new composite material developmentKers, Jaan; Kulu, Priit; Goljandin, Dmitri; Mikli, ValdekProceedings of the 5th International Conference of DAAAM Baltic : Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur : 20-22 April 2006, Tallinn, Estonia2006 / p. 267-271 : ill

A review of particulate-reinforced aluminum matrix composites fabricated by selective laser meltingWang, Pei; Eckert, Jürgen; Prashanth, Konda Gokuldoss; Kaban, Ivan; Xi, L.; Scudino, SergioTransactions of nonferrous metals society of China2020 / p. 2001-2034 https://doi.org/10.1016/S1003-6326(20)65357-2 http://tnmsc.csu.edu.cn/paper/paperView.aspx?id=paper_321576 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Rheological and mechanical properties of poly(lactic) acid- and polyethylene-based cellulosic compositesŠumigin, Dmitri; Poltimäe, Triinu; Tarasova, Elvira; Krumme, Andres; Meier, PilleBIOCOMP 2010 : 10th Pacific Rim Bio-based Composites Symposium : October 5th-8th, 2010, Banff, Alberta, Canada2010 / p. 310

Rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose compositesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Meier, PilleMaterials science = Medžiagotyra2011 / p. 32-37 : ill

Selected aspects of current challenges in composite product development for automotive and aerospace industryCzichon, Steffen; Köhnke, Jessica; Preisler, Andreas; Herranen, HenrikComposite materials and structures in aerospace engineering2016 / p. 51-63 http://dx.doi.org/10.4028/www.scientific.net/AMM.828.51

Selective laser manufacturing of Ti-based alloys and composites : impact of process parameters, application trends, and future prospectsSingh, Nirmal Kumar; Hameed, Pearlin; Ummethala, Raghunandan; Manivasagam, Geetha; Prashanth, Konda Gokuldoss; Eckert, Juergen H.Materials Today Advances2020 / Art. 100097 https://doi.org/10.1016/j.mtadv.2020.100097 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Selective laser melting for manufacturing of MoSi2/Si3N4 compositesMinasyan, Tatevik; Rodriguez, Miguel Angel; Liu, Le; Aghayan, Marina; Kollo, Lauri; Hussainova, IrinaECerS 2017 : 15th Conference & Exhibition of the European Ceramic Society, July 9–13, 2017, Budapest, Hungary : Book of abstracts2017 / p. 77-78 https://static.akcongress.com/downloads/ecers/ecers2017-abstract-book.pdf

Selective laser melting of ceramic compositesAydinyan, Sofiya; Liu, Le; Minasyan, Tatevik; Hussainova, IrinaXVI Conference and Exhibition Of The European Ceramic Society : abstract book2019 / p. 22

Selective laser melting of Ti/cBN compositeMinasyan, Tatevik; Liu, Le; Aydinyan, Sofiya; Antonov, Maksim; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 257-262 : ill https://www.scientific.net/KEM.799.257 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.257 Conference proceeding at Scopus Article at Scopus

Selective laser melting of TiB2-Ti composite with high content of ceramic phaseLiu, Le; Minasyan, Tatevik; Ivanov, Roman; Aydinyan, Sofiya; Hussainova, IrinaCeramics international2020 / p. 21128-21135 https://doi.org/10.1016/j.ceramint.2020.05.189 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Selective laser melting of Ti-B-Si system produced by SHS [Online resource]Aydinyan, Sofiya; Liu, Le; Hussainova, IrinaAbstracts : 14th International Ceramics Congress2018 / CB-10.2:L06 http://2018.cimtec-congress.org/abstracts_focused_session_cb-10

Selective laser sintering of combustion synthesized titanium diboride based compositesLiu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaEuropean Powder Metallurgy Association : proceedings : 14 – 18 October 2018, Bilbao, Spain2018 / art. 3987459 [USB] https://www.epma.com/publications/euro-pm-proceedings/product/euro-pm2018-proceedings-usb

Selective photocurrent generation in HfO 2 and carbon nanotube hybrid nanocomposites under Ultra-Violet and visible photoexcitationsRauwel, Protima; Galeckas, Augustinas; Ducroquet, Frédérique; Rauwel, ErwanMaterials Letters2019 / p. 45 - 48 https://doi.org/10.1016/j.matlet.2019.03.030 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Short fibre reinforced cementitious composites and ceramics2019 https://doi.org/10.1007/978-3-030-00868-0

SHS produced TiB2-Si powders for selective laser melting of ceramic-based compositeLiu, Le; Aydinyan, Sofiya; Minasyan, Tatevik; Hussainova, IrinaApplied sciences2020 / art. 3283, 12 p. : ill https://doi.org/10.3390/app10093283 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

SHS-derived powders obtained by coupled reactions and thermal dilution for subsequent consolidationAydinyan, Sofiya; Hussainova, Irina; Kharatyan, SurenCIMTEC 2022 : 15th International Ceramics Congress (June 20-24) CIMTEC 2022 : 9th Forum on New Materials (June 25-29)2022 http://2022.cimtec-congress.org/focused-session-ca-11_1

Simulation of detecting contact nonlinearity in carbon fibre polymer using ultrasonic nonlinear delayed time reversalLints, Martin; Salupere, Andrus; Dos Santos, SergeACTA acustica united with acustica2017 / p. 978-986 : ill https://doi.org/10.3813/AAA.919127

Simulation of solitary wave propagation in carbon fibre reinforced polymerLints, Martin; Salupere, Andrus; Dos Santos, SergeProceedings of the Estonian Academy of Sciences2015 / p. 297-303 : ill

Sintering behavior of ZrC-TiC-MoSi2 ceramic composite [Online resource]Minasyan, Tatevik; Aydinyan, Sofiya; Liu, Le; Cygan, Slawomir; Hussainova, IrinaExplosive Production of New Materials : Science, Technology, Business, and Innovations2018 / p. 148-150 : ill http://www.ism.ac.ru/events/EPNM2018/EPNM2018_BookofPapers.pdf http://dx.doi.org/10.30826/EPNM18-052

Sintering of zirconium carbide-based compositesYung, Der-Liang; Voltšihhin, Nikolai; Hussainova, Irina; Kollo, Lauri; Traksmaa, RainerProceedings of EuroPM2012 – Hardmetals : Cermets and Ceramics2012 / p. 83-88 : ill https://www.researchgate.net/publication/250254543_Sintering_of_zirconium_carbide-based_composites

Sliding wear behaviour of alumina/nickel nanocomposites processed by a conventional sintering routeRodriguez-Suarez, T.; Bartolome, Jose F.; Smirnov, Anton; Lopez-Esteban, S.; Torrecillas, R.; Moya, J.S.Journal of the European Ceramic Society2011 / p. 1389-1395 : ill

Sliding wear behaviour of basalt containing composites with additions of either metallic and/or ceramic phasesAntonov, Maksim; Goljandin, Dmitri; Andreev, A.; Voltšihhin, Nikolai; Hussainova, IrinaBaltTrib 2013 : VII International Scientific Conference : proceedings2013 / p. 67-72 : ill

Sliding wear of composite stainless steel hardfacing under room and elevated temperatureSurženkov, Andrei; Baroninš, Janis; Viljus, Mart; Traksmaa, Rainer; Kulu, PriitMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 195-200 : ill http://dx.doi.org/10.4028/www.scientific.net/SSP.267.195

Sliding wear performance of in-situ spark plasma sintered Ti-TiBw composites at temperatures up to 900 °CKumar, Rahul, 1993-; Antonov, Maksim; Liu, Lei; Hussainova, IrinaWear2021 / art. 203663, 9 p.: ill https://doi.org/10.1016/j.wear.2021.203663 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Sol-Gel approach to the calcium phosphate nanocompositesBeganskiene, Aldona; Stankeviciute, Zivile; Malakauskaite, Milda; Bogdanoviciene, Irma; Mikli, Valdek; Tõnsuaadu, Kaia; Kareiva, AivarasNanostructured materials and nanotechnology VII : a collection of papers presented at the 37th International Conference on Advanced Ceramics and Composites, January 27-February 1, 2013, Daytona Beach, Florida2014 / p. 3-14 : ill

Sol-Gel Approach to the Calcium Phosphate Nanocomposites : (ICACC-S7-P091-2013)Beganskiene, Aldona; Bogdanoviciene, Irma; Tõnsuaadu, Kaia37th International Conference and Exposition on Advanced Ceramics and Composites : abstracts book : January 27-February 1, 2013, Daytona Beach, Florida2013 / p. 102

Sol-gel approach to the calcium phosphate nanocomposites [Electronic resource]Beganskiene, Aldona; Bogdanoviciene, Irma; Mikli, Valdek; Tõnsuaadu, KaiaProceedings of the 37th International Conference on Advanced Ceramics and Composites : January 27-February 1, 2013, Hilton Daytona Beach Resort and Ocean Center, Daytona Beach, Florida, USA2013 / [10] p. : ill [CD-ROM]

Solid particle erosion of the Cr3C2-Ni metalmatrix compositesAntonov, Maksim; Hussainova, Irina; Pirso, JüriOST-01 Symposium on Machine Design : Tallinn, Estonia, October 4-5, 2001 : proceedings2001 / p. 233-243 : ill

Solid phase's transformations in boron carbide based composites during heat treatmentKommel, Lembit; Kimmari, EduardSolid state phenomena2008 / p. 175-180

Solid state processing of aluminum matrix Composites reinforced with nanoparticulate materialsLeparoux, Marc; Kollo, Lauri; Kwon, Hansang; Kallip, Kaspar; Babu, N. Kishore; AlOgab, Khaled A.; Talari, Mahesh KumarAdvanced engineering materials2018 / art. 1800401, 18 p.: ill https://doi.org/10.1002/adem.201800401 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Some comments on the theory of short fibre reinforced materialsHerrmann, Heiko; Eik, MarikaProceedings of the Estonian Academy of Sciences2011 / 3, p. 179-183 : ill

Spark plasma sintering of combustion synthesized TiB2-Si compositeLiu, Le; Aydinyan, Sofiya; Minasyan, Tatevik; Baroninš, Janis; Antonov, Maksim; Kharatyan, Suren; Hussainova, IrinaCeramics in modern technologies2019 / p. 59-66 https://doi.org/10.29272/cmt.2018.0009

Spark plasma sintering of layered γ-Al2O3/graphene reinforced nanocompositesSaffarshamshirgar, Ali; Ivanov, Roman; Hussainova, IrinaProceedings of the Estonian Academy of Sciences2019 / p. 140–144 : ill https://doi.org/10.3176/proc.2019.2.04 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-140-144.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion propertiesSingh, Neera; Ummethala, Raghunandan; Karamched, Phani S.; Sokkalingam, Rathinavelu; Gopal, Vasanth; Manivasagam, G.; Prashanth, Konda GokuldossJournal of alloys and compounds2021 / art. 158875, 10 p. : ill https://doi.org/10.1016/j.jallcom.2021.158875 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Structural-selective wearing model of cemented non-tungsten carbide compositesValdma, Leo; Talving, T.; Kübarsepp, Jakob; Kallas, Paul; Annuka, HarriProceedings of Japan International Tribology Conference1990 / p. 1-3

Structure and properties of boron nitride based composite produced by SHS methodKommel, Lembit; Kübarsepp, Jakob; Hussainova, Irina; Kimmari, EduardFifth International Conference on Composite Science and Technology : ICCST/5 : 1-3 February 2005, Sharjah, United Arab Emirates : proceedings2005 / p. 461-466 : ill

Studies of structural and morphological properties of cuprate conductive ceramics after electrochemical treatment in alkaline electrolyteStoyanova-Ivanova, Angelina; Lilov, Peter; Vasev, Alexander; Stoyanova, Antonina; Ivanova, Galia; Karashanova, Daniela; Mikli, ValdekMaterials chemistry and physics2020 / art. 121934 https://doi.org/10.1016/j.matchemphys.2019.121934 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Study of devulcanised crumb rubber-peat bio-based composite for environmental applicationsLapkovskis, Vjaceslavs; Mironovs, Viktors; Irtiseva, Kristine; Goljandin, DmitriModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 148-152 : ill https://www.scientific.net/KEM.799.148 https://www.ester.ee/record=b5235278*est https://doi.org/10.4028/www.scientific.net/KEM.799.148 Journal metrics at Scopus Article at Scopus

Study of reduction mechanism of WO3+CuO mixture by combined Mg/C reducer - influence of high heating rateNazaretyan, Khachik; Zargaryan, Armen; Aydinyan, Sofiya; Kharatyan, SurenJTACC+V4 : 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference : June 6–9, 2017, Budapest, Hungary : Book of Abstracts2017 / p. 206-207 https://static.akcongress.com/downloads/jtacc/jtacc2017-book-of-abstracts.pdf

Study of submerged and plasma arc welded composite hardfacings with a novel Cr3C2–Ni reinforcementBendikiene, Regita; Surženkov, Andrei; Tkachivskyi, Dmytro; Juhani, Kristjan; Viljus, Mart; Traksmaa, Rainer; Antonov, Maksim; Kulu, PriitProceedings of the Estonian Academy of Sciences2019 / p. 150–157 : ill https://doi.org/10.3176/proc.2019.2.06 http://www.kirj.ee/public/proceedings_pdf/2019/issue_2/proc-2019-2-150-157.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Suitability of devulcanized crumb rubber for oil spills remediationLapkovskis, Vjaceslavs; Mironovs, Viktors; Goljandin, DmitriEnergy procedia2018 / p. 351-357 : ill https://doi.org/10.1016/j.egypro.2018.07.103 Conference Proceedings at Scopus Article at Scopus Article at WOS

Superconductivity and magnetic studies of bulk Y123/ BaCuO2 compositeStoyanova-Ivanova, Angelina; Terzieva, Stanimira; Georgieva, S.; Mikli, ValdekRomanian journal of physics2018 / art. 602, 15 p. : ill http://www.nipne.ro/rjp/2018_63_1-2/RomJPhys.63.602.pdf Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Superhard B4C-ReB2 composite by SPS of microwave synthesized nanopowdersMnatsakanyan, R.; Davtyan, D.; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaMaterials letters2021 / art. 129163, 5 p. : ill https://doi.org/10.1016/j.matlet.2020.129163 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Superhard CBN-AL2O3 composites for cutting tool applicationsKumar, Rahul, 1993-; Antonov, MaksimTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [4.-5. veebr. 2019, Tartu : teesid]2019 / 1 p http://fmtdk.ut.ee/teesid-2019/

Surface fatigue of Al-metal matrix composites at impact loadingSaarna, Mart; Sergejev, Fjodor; Gomon, Jaana-Kateriina; Kollo, Lauri; Leparoux, MarcEngineering materials and tribology2013 / p. 119-124 : ill

Sustainable fabrication of polypropylene-postconsumer cotton composite materials : circularity, characterization, mechanical testing, and tribologyHussain, Abrar; Podgurski, Vitali; Goljandin, Dmitri; Antonov, Maksim; Viljus, Mart; Krasnou, IlliaMaterials today sustainability2023 / art. 100344, 16 p. : ill https://doi.org/10.1016/j.mtsust.2023.100344

Synergistic effect of Ag and MoS2 on high-temperature tribology of self-lubricating NiCrBSi composite coatings by laser metal depositionKumar, Rahul, 1993-; Antonov, Maksim; Varga, Markus; Hussainova, Irina; RodrIguez Ripoll, ManelWear2023 / art. 205114 https://doi.org/10.1016/j.wear.2023.205114

Synergistic strengthening mechanisms of dual-phase (TiN+AlN) reinforced aluminum matrix composites prepared by laser powder bed fusionWang, Ruiqi; Xi, Lixia; Feng, Lili; Sarac, Baran; Prashanth, Konda Gokuldoss; Eckert, Jürgen; Gu, Dongdong3D printing and additive manufacturing2023 / p. ? https://doi.org/10.1089/3dp.2023.0004

Synthesis and consolidation of Mo-Cu composite nanopowder [Online resource]Minasyan, Tatevik; Kirakosyan, Hasmik; Aydinyan, Sofiya; Liu, Le; Hussainova, Irina; Kharatyan, SurenExplosive Production of New Materials : Science, Technology, Business, and Innovations2018 / p. 151-153 : ill http://www.ism.ac.ru/events/EPNM2018/EPNM2018_BookofPapers.pdf http://dx.doi.org/10.30826/EPNM18-053

Synthesis of Ni–W nanopowders from oxide and salt precursors in combustion mode by using thermo-kinetic coupling approach [Online resource]Zakaryan, Marieta; Aydinyan, Sofiya; Kharatyan, SurenExplosive Production of New Materials : Science, Technology, Business, and Innovations2018 / p. 298-300 : ill http://www.ism.ac.ru/events/EPNM2018/EPNM2018_BookofPapers.pdf http://dx.doi.org/10.30826/EPNM18-103

Synthesis of superhard lightweight composites and improvement of their properties via chemical processingKommel, Lembit; Tamm, Toomas; Metsvahi, Raido; Nokkur, KadriFrontiers in materials processing, applications, research and technology : select proceedings of FiMPART 20152018 / p. 53-61 : ill https://doi.org/10.1007/978-981-10-4819-7_6 http://www.ester.ee/record=b4762647*est

ZrC-based and ZrC-doped composites for high-temperature and wear applications = ZrC baasil ja ZrC-ga legeeritud komposiitmaterjalid rakendusteks kõrgtemperatuursetes ja kulumistingimustesYung, Der-Liang2016 http://www.ester.ee/record=b4621174*est

TalTechi teadlasel õnnestus valmistada materjal, mida rohepöörde käigus on pikisilmi oodatudgeenius.ee2024 TalTechi teadlasel õnnestus valmistada materjal, mida rohepöörde käigus on pikisilmi oodatud https://digikogu.taltech.ee/et/Item/3dad7b12-4a7a-4c9d-8162-30388c52bf5e

TalTechi teadlaste prinditud luu päästis noore naise jala amputeerimisest [Võrguväljaanne]Himma, Marjunovaator.err.ee2019 / fot TalTechi teadlaste prinditud luu päästis noore naise jala amputeerimisest

Teaduse elutööpreemiad saavad Raivo Uibo ja Jakob Kübarsepp = Научные премии за дело всей жизни присуждены специалистам в порошковой металлургии и клинической иммунологииohtuleht.ee2024 Teaduse elutööpreemiad saavad Raivo Uibo ja Jakob Kübarsepp Научные премии за дело всей жизни присуждены специалистам в порошковой металлургии и клинической иммунологии

Technological peculiarities of chromium carbide-based iron alloy bonded cermetKolnes, Märt; Kübarsepp, Jakob; Viljus, Mart; Traksmaa, RainerMaterials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania2017 / p. 82-86 : ill https://doi.org/10.4028/www.scientific.net/SSP.267.82

Technology and characterization of composite thermal spray powdersPeetsalu, Priidu; Zimakov, Sergei; Pirso, Jüri; Mikli, Valdek; Tarbe, Riho; Kulu, PriitMaterials science = Medžiagotyra2005 / 4, p. 385-389 : ill

Technology design of composite partsKarjust, Kristo; Küttner, Rein; Pohlak, MeelisJournal of achievements in materials and manufacturing engineering2007 / 2, p. 23-26 : ill https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=7a2f5ebd0bd5e7c08ff1cebc18a438a5c89e2231

Tehnikaülikooli laborisse saabus seade läbi aknapostimees.ee2023 TalTechi uus 1,5-tonnine seade tõsteti hoonesse läbi akna Tehnikaülikooli laborisse saabus seade läbi akna

Tehnoplastid : plastide üldiseloomustus, plastide valik, plastide mehaanilised teimid, firmaplastid1999 https://www.ester.ee/record=b1222251*est

Teras kulumiskindlate komposiitide tehnoloogiasKübarsepp, JakobTeadusmõte Eestis (X). Tehnikateadused. 3 : [artiklikogumik]2019 / lk. 108-121 : ill., fot https://www.ester.ee/record=b5208765*est

The determination of mechanical properties of orthotropic compositesLasn, Kaspar; Klauson, Aleksander; Chati, F.; Decultot, DominiqueXVI International Conference Mechanics of Composite Materials : book of abstracts2010 / p. 117

The effect of approximation accuracy of the orientation distribution function on the elastic properties of short fibre reinforced compositesEik, Marika; Puttonen, Jari; Herrmann, HeikoComposite structures2016 / p. 12-18 : ill http://dx.doi.org/10.1016/j.compstruct.2016.03.046

The effect of niobium on in situ synthesis of titanium carbide in composite hardfacingsYöyler, Sibel; Surzhenkov, Andrei; Viljus, Mart; Traskmaa, Rainer; Juhani, KristjanMaterials science forum ; 11042023 / p. 55-60 https://doi.org/10.4028/p-A5WzJl

The effect of test conditions on the erosion resistance of cermetsAntonov, Maksim; Hussainova, IrinaInternational Symposium on Machine Design OST 2001 : [Tallinn, Estonia, October 4-5, 2001] : abstracts2001 / [1] p

The impact resistance of highly densified metal alloys manufactured from gas-atomized pre-alloyed powdersRahmani Ahranjani, Ramin; Antonov, Maksim; Prashanth, Konda GokuldossCoatings2021 / art. 216, 14 p. : ill https://doi.org/10.3390/coatings11020216 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

The influence of refractory composition in binder phase on wear properties of boron carbide aluminium compositesKommel, Lembit; Traksmaa, Rainer; Kimmari, EduardAbstracts of 10th Nordic Symposium on Tribology NORDTRIB2002 / p. 97

The influence of refractory composition in binder phase on wear properties of boron carbide aluminium composites [Electronic resource]Kommel, Lembit; Traksmaa, Rainer; Kimmari, EduardProceedings of 10th Nordic Symposium on Tribology NORDTRIB2002 / Ref. 18 [CD-ROM]

The magnetic cores from magnetically soft powder compositesLaansoo, Andres; Käerdi, HelmoTallinna Tehnikaülikooli Toimetised1994 / lk. 53-60: ill

The microstructure and properties of fine-grained cermetsViljus, Mart2003

The preparation of TiC/TiN composites by selective laser meltingLiu, Le; Minasyan, Tatevik; Aydinyan, Sofiya; Hussainova, IrinaModern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia2019 / p. 165-170 : ill https://www.ester.ee/record=b5235278*est https://www.scientific.net/KEM.799.165 https://doi.org/10.4028/www.scientific.net/KEM.799.165 Conference proceeding at Scopus Article at Scopus

The science of sinter-HIP : when to turn on the gasYung, Der-Liang; Tarraste, Marek; Hussainova, IrinaTÜ ja TTÜ doktorikool "Funktsionaalsed materjalid ja tehnoloogiad" : 04.-05. märts 2014, Tartu2014 / [1] p

The structure and properties forming in boron carbide aluminium composites during processingKommel, Lembit; Hussainova, Irina; Kimmari, EduardProceedings of World Congres on Powder Metallurgy and Particulate Materials, USA. Vol. 62002 / p. 182-187

The wear of PVD coated elements in oscillation motion at high temperatureMichalczewski, Remigiusz; Kalbarczyk, Marek; Slomka, Zbigniew; Liu, Le; Antonov, Maksim; Hussainova, IrinaProceedings of the Estonian Academy of Sciences2021 / p. 500-507 : ill https://doi.org/10.3176/proc.2021.4.18 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Thermal and mechanical properties of composites based on treated lignocellulosic fibresSüld, Tiia-Maaja; Viikna, Anti; Sassi, RiinBook of abstracts : MEDICTA 2007 : the 8th Mediterranean Conference on Calorimetry and Thermal Analysis : September 25th - September 29th, 2007, Palermo, Italy2007 / p. 236

Thermal and microstructural analysis of doped alumina nanofibersAghayan, Marina; Gasik, Michael; Hussainova, Irina; Rubio-Marcos, Fernando; Kollo, Lauri; Kübarsepp, JakobThermochimica acta2015 / p. 43-48 : ill http://dx.doi.org/10.1016/j.tca.2015.01.009

Thermal and rheological properties of composites based on poly(lactic acid) and cellulose derivativesŠumigin, Dmitri; Tarasova, Elvira; Krumme, Andres; Viikna, AntiBaltic Polymer Symposium 2012 : Liepaja, Latvia, September 19-22 : programme and proceedings2012 / p. 127

Thermal degradation and mechanical properties of biofiber-reinforced polyethylene compositesSüld, Tiia-Maaja; Viikna, AntiXXVIII National Conference on Calorimetry, Thermal Analysis and Chemical Thermodynamics : Milan, Italy, December 11-15, 20062006 / p. 65

Thermal performance of two different PV-ETICS integration solutions in a real environmentHeim, Dariusz; Knera, Dominika; Krempski-Smejda, M.; Wieprzkowicz, Anna; Kalamees, TargoJournal of Physics: Conference Series2023 / 8 p https://doi.org/10.1088/1742-6596/2654/1/012098

Thermal properties of calcium-aluminate based materialsKulu, Priit; Goljandin, Dmitri; Traksmaa, Rainer; Kaljuvee, Tiit; Gregor, AndreProceedings of the Estonian Academy of Sciences2021 / p. 508-515 : ill https://doi.org/10.3176/proc.2021.4.19 Journal metrics at Scopus Article at Scopus Jornal metrics at WOS Article at WOS

Thermal properties of calcium-aluminate based materialsKulu, Priit; Goljandin, Dmitri; Traksmaa, Rainer; Kaljuvee, Tiit; Gregor, AndreIOP conference series : materials science and engineering2021 / art. 012028, 7 p. : ill https://doi.org/10.1088/1757-899X/1140/1/012028

Thermal shock behaviour of cermetsAntonov, Maksim; Pirso, Jüri; Hussainova, Irina; Klug, MarkusEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 75

Thermal, mechanical, and acoustic properties of polydimethylsiloxane filled with hollow glass microspheresVlassov, Sergei; Oras, Sven; Timusk, Martin; Zadin, Veronika; Tiirats, Tauno; Sosnin, Ilya M.; Lõhmus, Rünno; Linarts, Artis; Kyritsakis, Andreas; Dorogin, Leonid M.Materials2022 / art. 1652 : ill https://doi.org/10.3390/ma15051652 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Thermoreactive polymer composite with high particulate filler content = Suure pulbrilise täiteaine sisaldusega termoreaktiivne polümeerkomposiitAruniit, Aare2014 http://www.ester.ee/record=b3092370*est

3D printed metal and metal-ceramic cellular lattice structures for wear and thermoacoustic applications = 3D prinditud metall- ja metall-keraamilised kärgvõre struktuurid triboloogilistele- ja termoakustilistele rakendusteleHolovenko, Yaroslav2019 https://digi.lib.ttu.ee/i/?12289

Ti6Al7Nb–TiB nanocomposites for ortho-implant applicationsSingh, Neera; Edachery, Vimal; Rajput, Monika; Chatterjee, Kaushik; Kailas, Satish V.; Prashanth, Konda GokuldossJournal of materials research2022 / p. 2525–2535 https://doi.org/10.1557/s43578-022-00578-2 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Ti-B based composites by spark plasma sintering and selective laser melting = Sädepaagutus- ja selektiivse lasersulatus-tehnoloogia abil valmistatud Ti-B baasil komposiitmaterjalidLiu, Le2021 https://www.ester.ee/record=b5460101*est https://digikogu.taltech.ee/et/Item/2a4de866-52a3-4bef-8c4e-e136c89285a3 https://doi.org/10.23658/taltech.47/2021

Time-effective synthesis of rhombohedral CuAlO2 from mesoporous alumina substrateSaffarshamshirgar, Ali; Aghayan, Marina; Tripathi, Tripurari S.; Karppinen, Maarit; Gasik, Michael; Hussainova, IrinaMaterials & design2018 / p. 48-55 : ill https://doi.org/10.1016/j.matdes.2018.03.031 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Time-effective synthesis of rhombohedral CuAlO2 from mesoporous alumina substrate [Online resource]Saffarshamshirgar, Ali; Aghayan, Marina; Tripathi, Tripurari S.; Karppinen, Maarit; Gasik, Michael; Hussainova, IrinaTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märtsil 2018, Tallinn : teesid] GSFMT Scientific Conference 2018 : Tallinn, March 7-8, 2018 : abstracts2018 / 1 p http://fmtdk.ut.ee/teesid-2018/

Time-efficient automated analysis for fibre orientations in steel fibre reinforced concretePastorelli, Emiliano; Herrmann, HeikoProceedings of the Estonian Academy of Sciences2016 / p. 28-36 : ill http://dx.doi.org/10.3176/proc.2016.1.02

Toughness characteristics of carbide compositesKlaasen, Heinrich; Kübarsepp, Jakob; Preis, IrinaProceedings of the 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia2002 / p. 154-156 : ill

Toughness of carbide composites and their durability in applicationKlaasen, Heinrich; Kübarsepp, Jakob; Preis, IrinaEuro PM 2002 : European Conference on Hard Materials and Diamond Tooling, Lausanne, Switzerland, October 7-9th 2002 : hard materials proceedings2002 / p. 240-245 : ill

Toward high temperature tough ceramicsHussainova, Irina; Yung, Der-Liang; Voltšihhin, Nikolai; Traksmaa, Rainer; Hannula, Simo-PekkaECCM15 - 15th European Conference on Composite Materials : Venice, Italy, 24-28 June 20122012 / [8] p http://www.escm.eu.org/eccm15/data/assets/178.pdf

Tribological and circular economy aspects of polypropylene/cotton fibre hybrid compositeHussain, Abrar; Podgurski, Vitali; Goljandin, Dmitri; Antonov, Maksim; Kumar, Rahul, 1993-; Kamboj, Nikhil Kumar; Rahmani Ahranjani, Ramin; Viljus, Mart; Ahmad, Tahir; Krumme, Andres; Krasnou, IlliaProceedings of the Estonian Academy of Sciences2022 / p. 186-193 : ill https://doi.org/10.3176/proc.2022.2.03 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Tribological characteristics of micro- and nano-composites Cu-Al2O3 at room and elevated temperaturesHvizdoš, Pavol; Besterci, Michal; Kulu, PriitHigh temperature materials and processes2011 / p. 573-577

Tribological parameters of copper-alumina compositeHvizdoš, Pavol; Kulu, Priit; Besterci, MichalEngineering materials and tribology2013 / p. 191-196 https://www.researchgate.net/publication/271863555_Tribological_Parameters_of_Copper-Alumina_Composite

Tribological properties of selective laser melted Al12Si alloyRathod, H.J.; Nagaraju, T.; Prashanth, Konda Gokuldoss; Ramamurty, U.Tribology international2019 / p. 94-101 : ill https://doi.org/10.1016/j.triboint.2019.04.038 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Tribological properties of the Cr3C2-Ni metal-matrix compositesHussainova, Irina; Pirso, JüriEUROMAT 2001 : 7th European Conference on Advanced Materials and Processes : Rimini, Italy, 10-14 June, 2001 : conference abstracts2001 / p. 122-123

Tribological properties of the Cr3C2-Ni metal-matrix composites [Electronic resource]Hussainova, Irina; Pirso, JüriProceedings of 7th European Conference on Advanced Materials and Processes : EUROMAT 2001 : Italy2001 / [CD-ROM]

TTÜ teadlased arendavad kosmosetehnika jaoks vajalikke supekondensaatoreid [Võrguväljaanne]Vähi, Kerstinovaator.err.ee2020 / fot TTÜ teadlased arendavad kosmosetehnika jaoks vajalikke supekondensaatoreid

Tunneling-percolation behavior of graphene-encapsulated whiskers as electroconductive fillers for ceramicsHussainova, Irina; Ivanov, Roman; Kale, Sudhir S.; Jasiuk, IwonaShort fibre reinforced cementitious composites and ceramics2019 / p. 131-139 https://doi.org/10.1007/978-3-030-00868-0_9 Article collection metrics at Scopus Article at Scopus

Ultra high-pressure spark plasma sintered ZrC-Mo and ZrC-TiC compositesYung, Der-Liang; Cygan, Slawomir; Antonov, Maksim; Jaworska, Lucyna; Hussainova, IrinaInternational journal of refractory metals and hard materials2016 / p. 201-206 : ill http://doi.org/10.1016/j.ijrmhm.2016.09.014

Ultrahigh pressure spark plasma sintering of ZrC-TiC-MoSi2 and ZrC-TiC-Si3N4 composites [Online resource]Minasyan, Tatevik; Aydinyan, Sofiya; Liu, Le; Cygan, Slawomir; Hussainova, IrinaTartu Ülikooli ASTRA projekt PER ASPERA : Funktsionaalsed materjalid ja tehnoloogiad : [7-8 märtsil 2018, Tallinn : teesid] GSFMT Scientific Conference 2018 : Tallinn, March 7-8, 2018 : abstracts2018 / 1 p http://fmtdk.ut.ee/teesid-2018/

Use of pyrolysis products of polyethylene wastes in thermoplastic compositesViikna, AntiTallinna Tehnikaülikooli Toimetised1994 / lk. 100-106

Using small punch testing method for the analysis of creep behaviour of Al-Al4C3 compositesBesterci, Michal; Dobeš, Ferdinand; Kulu, Priit; Sülleiova, KatarinaEstonian journal of engineering2010 / 3, p. 243-254 : ill https://artiklid.elnet.ee/record=b2156237*est

Wavelet based discretization technique for analysis and design of composite structuresMajak, Jüri; Kers, Jaan; Pohlak, Meelis; Eerme, Martin; Luiga, K.The 18th International Conference on Composite Materials. Composite materials : key to the future2011 / [6] p

Waves in materials with microstructure : numerical simulationBerezovski, Mihhail; Berezovski, Arkadi; Engelbrecht, JüriInternational Conference on Complexity of Nonlinear Waves : October 5-7, 2009 : book of abstracts2009 / p. 9

Wear behaviour of Cr3C2-Ni cermet reinforced hardfacingsBendikiene, Regita; Ciuplys, Antanas; Sertvytis, Rolandas; Surženkov, Andrei; Tkachivskyi, Dmytro; Viljus, Mart; Traksmaa, Rainer; Antonov, Maksim; Kulu, PriitJournal of materials research and technology2020 / p. 7068-7078 : ill https://doi.org/10.1016/j.jmrt.2020.05.042 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Wear performance of WC- and TiC- based ceramic-metallic compositesKübarsepp, Jakob; Klaasen, Heinrich; Tšinjan, Aleksei; Roosaar, Tõnu; Annuka, HarriProceedings of VI International Scientific Conference BALTTRIB 20112011 / p. 150-155

Wear performance of WC- and TiC-based ceramic and metal compositesRoosaar, Tõnu; Kübarsepp, Jakob; Klaassen, HeinrichMaterials engineering & Baltrib 2010 : materials of the XIX-th International Baltic Conference : October 28-29, 2010, Riga, Latvia2010 / p. 28

Wear performance of WC-and TiC-based ceramic-metallic composites = WC- ja TiC-baasil keraamilis-metalsete komposiitide kulumiskindlusRoosaar, Tõnu2010 https://www.ester.ee/record=b2634532*est

Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wearSurženkov, Andrei; Viljus, Mart; Simson, Taavi; Tarbe, Riho; Saarna, Mart; Casesnoves, FranciscoJournal of physics : conference series2017 / art. 012060, p. 1-10 : ill https://doi.org/10.1088/1742-6596/843/1/012060

Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditionsKulu, Priit; Tarbe, Riho; Saarna, Mart; Surženkov, Andrei; Peetsalu, Priidu; Talviste, KristoferInternational journal of microstructure and materials properties2015 / p. 101-113 http://dx.doi.org/10.1504/IJMMP.2015.068718

Wear resistance behavior of light-weight compositesKommel, Lembit; Kimmari, EduardAbstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" : 2007, October 25-26, Riga, Latvia2007 / p. 22

Wear resistance influencers of particle reinforced polymer compositeAruniit, Aare; Kers, Jaan; Krumme, Andres; Antonov, Maksim; Allikas, Georg; Herranen, Henrik; Pabut, OttProceedings of 19th International Conference on Composite Materials (ICCM19)2013

Wear resistance of (Diamond-Ni)-Ti6Al4V gradient materials prepared by combined selective laser melting and spark plasma sintering techniquesRahmani Ahranjani, Ramin; Antonov, Maksim; Kollo, LauriAdvances in tribology2019 / art. 5415897, 12 p. : ill https://doi.org/10.1155/2019/5415897 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Wear resistant self-fluxing alloy based TiC-NiMo and Cr2C3-Ni hardmetal particles reinforced composite coatingsSurženkov, Andrei; Vallikivi, Ahto; Mikli, Valdek; Viljus, Mart; Vilgo, Timo; Kulu, PriitProceedings of the 2nd International Scientific Conference Manufacturing Engineering & Management 2012 : ICMEM 20122012 / p. 33-36 : ill https://www.researchgate.net/publication/262731588_WEAR_RESISTANT_SELF-FLUXING_ALLOY_BASED_TIC-NIMO_AND_CR2C3-NI_HARDMETAL_PARTICLES_REINFORCED_COMPOSITE_COATINGS

Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powdersSarjas, Heikki; Goljandin, Dmitri; Kulu, Priit; Mikli, Valdek; Surženkov, Andrei20th International Baltic Conference Materials Engineering 2011, October 27-28, Kaunas, Lithuania : book of abstracts2011 / p. 25

Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powdersSarjas, Heikki; Goljandin, Dmitri; Kulu, Priit; Mikli, Valdek; Surženkov, Andrei; Vuoristo, PetriMaterials science = Medžiagotyra2012 / p. 34-39 : ill https://matsc.ktu.lt/index.php/MatSc/article/view/1338

Wearing model of cemented carbide compositesValdma, Leo; Kübarsepp, Jakob; Kallas, Paul; Annuka, HarriTallinna Tehnikaülikooli Toimetised1991 / lk. 99-105: ill

Wear-resistant composite coatings, surface engineeringKulu, Priit; Zimakov, SergeiEuromat '99. Vol. 112000 / p. 144-145

Wear-resistant WC-Co-NiCrSiB composite coatingsKulu, Priit; Pihl, Toomas; Halling, JaanusNORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998. Vol. 21998 / p. 809-818

Wetting and interfacial behaviour in the TiB2-NiCrBSiC systemStorozhenko, Maryna; Umanskyi, Oleksandr; Antonov, MaksimJournal of alloys and compounds2019 / p. 15-22 : ill https://doi.org/10.1016/j.jallcom.2018.11.102 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Vibration analysis of multifunctional laminated glass panel [Online resource]Väer, Kaur; Õunapuu, Erko; Eerme, Martin; Auriemma, Fabio; Rämmal, HansInternational Conference "Functional Materials and Nanotechnologies 2017" : Tartu, Estonia in April, 24-27, 2017 : book of abstracts2017 / p. 145 http://www.ester.ee/record=b4668793*est

Vibration-assisted sputter coating of cenospheres : a new approach for realizing Cu-based metal matrix syntactic foamsShishkin, Andrei; Drozdova, Maria; Kozlov, Viktor; Hussainova, Irina; Lehmhus, DirkMetals2017 / art. 16, p. 1-10 : ill http://dx.doi.org/10.3390/met7010016

Videod teaduslikust eksperimendist : sinu eilsetest teksadest kootakse uus müts või kampsunrohe.geenius.ee2023 Videod teaduslikust eksperimendist: sinu eilsetest teksadest kootakse uus müts või kampsun

Virtual reality visualization for short fibre orientation analysisPastorelli, Emiliano; Herrmann, HeikoBEC 2014 : 2014 14th Biennial Baltic Electronics Conference : proceedings of the 14th Biennial Baltic Electronics Conference : Tallinn University of Technology, October 6-8, 2014, Tallinn, Estonia2014 / p. 201-204 : ill

Visualization of strain distribution around the edges of a rectangular foreign object inside the woven carbon fibre specimenHerranen, Henrik; Allikas, Georg; Eerme, Martin; Vene, Karl-Kristo; Otto, Tauno; Gregor, Andre; Kirs, Maarjus; Mädamürk, KarlEstonian journal of engineering2012 / p. 279-287 : ill https://artiklid.elnet.ee/record=b2527774*est

Wood-based composite plastic with polyethylene and urea-formaldehyde binderVares, Toomas; Reiska, ReinTallinna Tehnikaülikooli Toimetised1992 / lk. 45-51: ill

YSZ-rGO composite ceramics by spark plasma sintering : the relation between thermal evolution of conductivity, microstructure and phase stabilityGlukharev, Artem; Glumov, Oleg; Temnikova, Maria; Saffarshamshirgar, Ali; Hussainova, Irina; Konakov, VladimirElectrochimica acta2021 / art. 137533 https://doi.org/10.1016/j.electacta.2020.137533 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

Влияние пористости на магнитные свойства магнитомягких композиционных материаловRoninson, Aleksander; Laansoo, Andres; Ritso, Aadu; Siimar, ReinСвойства и технология изготовления износостойких материалов1984 / с. 63-77

Влияние термообработки железного порошка на микроструктуру и свойства магнитомягких композиционных материаловPärnapuu, Arnold; Ritso, Aadu; Laansoo, AndresСвойства и технология изготовления износостойких материалов1982 / с. 69-73

Влияние технологических факторов на свойства магнитомягких композиционных материаловMäeküla, TarmoXXVI студенческая научно-техническая конференция вузов Молдавской ССР, Белорусской ССР и Прибалтийских республик, 21-23 апреля 1982 года : тезисы докладов. Часть 2, Химия и технология, механика, строительство1982 / с. 140 https://www.ester.ee/record=b5165223*est

Влияние технологических факторов на свойства магнитомягких композиционных материаловLaansoo, Andres; Liimann, Väino; Siimar, Rein; Ritso, AaduTallinna Tehnikaülikooli Toimetised1990 / lk. 52-62: ill

Вопросы триботехнического материаловедения порошковых карбидостальных композитовValdma, Leo; Kübarsepp, Jakob; Annuka, HarriСовременные проблемы триботехнологии : тезисы докладов Всесоюзный научно-технологической конференций1988 / с. 152-153

Железные порошки для магнитомягких композиционных материаловSiimar, Rein; Liimann, Väino; Ritso, Aadu; Laansoo, AndresСвойства и технология изготовления композиционных материалов1986 / с. 78-88

Изучение особенностей прессования магнитомягких композиционных материаловMeinberg, M.; Tilk, H.; Laansoo, Andres; Käerdi, HelmoXXX студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 8-10 апреля 1986 года : тезисы докладов. Том II, Автоматика. Энергетика. Механика. Химия1986 / с. 130 https://www.ester.ee/record=b1305565*est

Испытание наноиндентированием и моделирование компоситов на основе карбида хромаHussainova, Irina; Hamed, Elham; Jasiuk, IwonaMechanics of composite materials2010 / p. 1-18 : ill

Исследование взаимосвязи гидроабразивного износа и коррозионной стойкости композиционных материалов на основе карбида бораМаринич М.А.; Кузенкова М.А.; Бевза Ю.В.; Беловол В.С.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 9-10

Исследование магнитных и электрических свойств магнитомягких композиционных материалов на физической модели зубцов плоского двигателяRitso, Aadu; Laansoo, Andres; Siimar, ReinТезисы докладов VI Всесоюзной научно-технической конференции "Новые технологические процессы и оборудование для производства электрических машин малой мощности" : (г. Тбилиси, 1-4 июня 1983 г.)1983 / с. 49-50 https://www.ester.ee/record=b2190535*est

Исследование применимости горючих сланцев и керогена в качестве наполнителя в поливинилхлоридных композицияхSilland, Harald; Teearu, M.Технология органических веществ. 11969 / с. 99-104 https://www.ester.ee/record=b1337236*est https://digikogu.taltech.ee/et/Item/d6e3c08c-1c99-48a8-ae34-e91a3f1c8d0d

Коррозионноизносостойкие безвольфрамовые композиты на основе тугоплавких соединений для деталей узлов трения, работающих в перегретом бидистилляте водыХалепа А.П.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 6-8

Критический радиус включений диоксида циркония в эффекте трансформационного упрочнения керамикFilippov, Roman; Freidin, Alexander; Hussainova, Irina; Vilchevskaya, ElenaФизическая мезомеханика2014 / c. 55-64 : ил

Магнитные свойства порошкового магнитомягкого композиционного материала при повышенных температурахLaansoo, Andres; Siimar, ReinФизика магнитных материалов : межведомственный тематический сборник научных трудов1988 / с. 109-115 https://www.ester.ee/record=b2909180*est

Магнитомягкие композиционные материалы для электрических машин малой мощностиRitso, Aadu; Siimar, ReinТезисы докладов IV Всесоюзной научно-технической конференции "Новые технологические процессы и оборудование для производства электрических машин малой мощности" (г. Тбилиси, 3-5 октября 1979 г.)1980 / с. 53-54

Магнитомягкий композиционный материал для магнитопроводов, работающих при повышенных температурахSiimar, Rein; Laansoo, Andres; Randmer, Uudus; Liimann, VäinoСвойства и технология изготовления композиционных материалов1985 / с. 49-56

Математическое моделирование магнитных характеристик ММКМSiimar, Rein; Randmer, Uudus; Ritso, AaduСвойства и технология изготовления композиционных материалов1986 / с. 89-98

Моделирование процесса намотки композитных цилиндрических оболочекKutin, Aleksei; Arjassov, GennadiНаучно-технический вестник информационных технологий, механики и оптики = Scientific and technical journal of information technologies, mechanics and optics2020 / c. 283−289 https://doi.org/10.17586/2226-1494-2020-20-2-283-289

Модель структурно-селективного износа двухфазных композитовValdma, LeoБезвольфрамовые порошковые твердые сплавы и карбидостали. Часть 1 : тезисы докладов IV республиканской научно-технической конференции1985 / с. 17-18 https://www.ester.ee/record=b1253975*est

Некоторые вопросы прочности магнитомягких композиционных материаловLaansoo, Andres; Liimann, Väino; Siimar, Rein; Ritso, Aadu; Akkel, T.Свойства и технология изготовления композиционных материалов1985 / с. 57-66

О методике определения магнитных характеристик магнитомягких композиционных материаловKass, I.; Liimann, Väino; Ritso, Aadu; Siimar, ReinXXV студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 21-23 апреля 1981 года : тезисы докладов. Том 2, Автоматика. Энергетика. Механика. Химия1981 / с. 85 https://www.ester.ee/record=b1322629*est

О применении магнитомягких композиционных материалов в качестве магнитопроводов электрических машинRitso, Aadu; Laansoo, Andres; Siimar, Rein; Drozdov, A.Тезисы докладов VI Всесоюзной научно-технической конференции "Новые технологические процессы и оборудование для производства электрических машин малой мощности" : (г. Тбилиси, 1-4 июня 1983 г.)1983 / с. 69-70 https://www.ester.ee/record=b2190535*est

О технологии прокатки и некоторых характеристиках железного порошкаLiimann, Väino; Mäeküla, Tarmo; Randmer, Uudus; Ritso, Aadu; Siimar, ReinXXV студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 21-23 апреля 1981 года : тезисы докладов. Том 2, Автоматика. Энергетика. Механика. Химия1981 / с. 130 https://www.ester.ee/record=b1322629~S1*est

Перспективы производства магнитопроводов из магнитомягких чешуйчатых композиционных материалов (ММКМЧ)Laansoo, Andres; Ritso, AaduЭлектротехническое производство1990 / 1, с. 11-12: рис

Получение слоистых магнитопроводов из магнитно-мягких композиционных материаловRitso, Aadu; Katrus, O.; Laansoo, Andres; Siimar, ReinПорошковая металлургия = Powder metallurgy : ежемесячный научно-технический журнал1985 / с. 70-73 : ил https://www.ester.ee/record=b1645489*est

Порошковая металлургияMosberg, Rudolf; Arensburger, Daniil; Letunovitš, Sergei; Kulu, Priit; Kallas, Paul; Halling, Jaanus; Kübarsepp, Jakob; Annuka, Harri; Zeer, G.; Valdma, Leo; Pirso, Jüri; Siimar, Rein; Laansoo, Andres; Randmer, Uudus; Liimann, Väino; Ritso, Aadu; Akkel, T.1985 https://www.ester.ee/record=b1302663*est

Порошковые магнитомягкие композиционные материалы для электромашиностроения : [монография]Laansoo, Andres1991 https://www.ester.ee/record=b1061777*est

Пропитка пористых металлов и свойства металлополимерных покрытийЗабукас В.; Квядарас В.Износостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 39-41

Проспект экспоната и экспонат "Магнитопроводы магнитомягких композиционных материалов"Laansoo, Andres; Liimann, Väino; Ritso, Aadu; Siimar, Rein1986

Прочность и пластичность карбидосталей с железоникелевыми связкамиKübarsepp, Jakob; Reshetnjak, Heinrich; Annuka, HarriИзносостойкие порошковые материалы и покрытия : тезисы докладов второй конференции Балтийских республик1991 / с. 15-17

Разработка технологии изготовления порошковых композиционных магнитомягких материалов (ПКММ) : работа на соиск. степ. магистра техн. наукLiimann, Väino1992 https://www.ester.ee/record=b2631149*est

Реология и технология получения композиционного материала на основе гипсоцементнопуццоланового вяжущего и стекловолокна : автореферат ... кандидата технических наук (05.23.05)Gorin, Andrei1985 http://www.ester.ee/record=b1542341*est

Реология и технология получения композиционного материала на основе гипсоцементнопуццоланового вяжущего и стекловолокна : диссертация ... кандидата технических наук : 05.23.05 - строительные материалы и изделияGorin, Andrei1984 http://www.ester.ee/record=b2425952*est

Свободный формальдегид в древесно-полимерных композиционных материалахKaps, TiitРеспубликанская научная конференция "Химия и применение фенолальдегидных смол" : тезисы докладов1987 / с. 149-151 https://www.ester.ee/record=b1263082*est

Свободный формальдегид в древесно-полимерных материалах. Сообщение 7, Технологические аспекты обработки древесно-композиционных материалов бикарбонатом аммонияVares, Toomas; Sillajõe, Aadu; Kaps, TiitTallinna Tehnikaülikooli Toimetised1990 / lk. 68-73

Сланцевые наполнители композиций на основе полимерных материаловFadejeva, Rimma; Joonas, Richard; Klementjeva, G.I Всесоюзная конференция по композиционным полимерным материалам и их применению в народном хозяйстве, (1-3 октября): тезисы докладов. Ч. 11980 / с. 52-53

Теплофизические свойства металлокерамических композиций системы Al2O3-NbOsipova, V.; Käär, HarriТеплоэнергетика : сборник статей. 121971 / с. 63-69 : илл https://www.ester.ee/record=b2190313*est https://digikogu.taltech.ee/et/Item/b5d52827-852f-4b06-9011-e964baabd316/

Термическое и кинетическое сопряженные реакций при cамораспространяющемся высокотемпературном синтезе материаловAydinyan, Sofiya; Kharatyan, SurenТехнологическое горение2019 / c. 429-451 https://www.elibrary.ru/item.asp?id=41525861

Точность размеров магнитопроводов из магнитомягких композиционных материалов (ММКМ)Martma, A.; Siimar, Rein; Liimann, VäinoXXX студенческая научно-техническая конференция вузов Прибалтийских республик, Белорусской ССР и Молдавской ССР, 8-10 апреля 1986 года : тезисы докладов. Том II, Автоматика. Энергетика. Механика. Химия1986 / с. 135 https://www.ester.ee/record=b1305565*est

Чешуйчатые магнитомягкие композиционные материалы для магнитопроводов электрических машинRitso, Aadu; Randmer, Uudus-Gerhard; Siimar, ReinВсесоюзная конференция по вопросам порошковой металлургии. Тезисы докладов XIV Всесоюзной конференции по порошковой металлургии (г. Ташкент, 1979 г.)1979 / с. 183-184