Abrasive impact wear of WC-Co and TiC-NiMo cermetsJuhani, Kristjan; Pirso, Jüri; Viljus, Mart; Letunovitš, Sergei; Tarraste, MarekProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 621-626 : ill https://www.researchgate.net/publication/286139638_Abrasive_impact_wear_of_WC-Co_and_TiC-NiMo_cermets

Accurate measurements of electrical conductivity of metals in the range from 2 MS/m to 14 MS/mParker, Martin; Pokatilov, Andrei; Raba, Karl; Kübarsepp, ToomasProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 700-704 : ill

Adhesion measuring method optimization in reinforced compositesKarjust, Kristo; Pohlak, Meelis; Majak, JüriProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 633-638 : ill

Chemical pre-treatment of mechanically milled recycled hardmetal powdersZikin, Arkadi; Yung, Der-Liang; Hussainova, Irina; Ilo, S.Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 777-782 : ill

Classification of supplay chain practices according to customer values in automotive industryMaleki, Meysam; Liiv, Innar; Ševtšenko, Eduard; Cruz-Machado, V.Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 542-547 : ill

Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solutionLille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Reitsnik, Renno; Veinthal, Renno; Mikli, Valdek; Sergejev, FjodorProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 680-687 : ill

Design of glass canopy panelVelsker, Tarmo; Lend, Henri; Kirs, MaarjusProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 759-764 : ill

Design of superhard c-BC2N-precipitates in B4C/Al-composites through SHS and heat treatmentKommel, Lembit; Metsvahi, Rainer; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, RainerProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 645-650 : ill

Determination of the mechanical properties of carbide composites by spherical indentationSergejev, Fjodor; Petrov, Mihhail; Kübarsepp, JakobProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 723-728 : ill

Development of emulsion and impregnation technology for wood bioprotectionKaps, Tiit; Reiska, Rein; Kallavus, Urve; Luga, Üllar; Kers, JaanProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 627-632 : ill

Effect of birch veneer processing factors on adhesive bond shear strengthPiirlaid, Marko; Matsi, M.; Kers, Jaan; Rohumaa, Anti; Meier, PilleProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 705-710 : ill

Effect of carbon content on sinterability and properties of ZrO2 doped WC-cermetsCura, M. Erkin; Voltšihhin, Nikolai; Hussainova, Irina; Viljus, Mart; Hannula, Simo-PekkaProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 771-776

From product centred design to value centred design : understanding the value-systemRandmaa, Merili; Howard, Thomas; Otto, TaunoProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 548-554 : ill

Innovation, product development and patents at universitiesKartus, Raul; Kukrus, AntsProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 477-482 : ill

Knowledge management framework for production route selection in manufacturing enterprisesSahno, Jevgeni; Öpik, Rain; Kostina, Marina; Paavel, Marko; Ševtšenko, Eduard; Wang, YanProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 567-572 : ill

Leachability of wood protection agents from impregnated pine woodKängsepp, Kärt; Larnoy, Erik; Kers, Jaan; Meier, PilleProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 663-667

Lean product development in Estonian SMEsTähemaa, Toivo; Temerbulatova, Anna; Karjust, KristoProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 603-608 : ill

Life cycle extension for used vehicles and their environmental impactBaškite, Viktoria; Durmanenko, Dmitri; Karaulova, TatjanaProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 401-406 : ill

Methodology for configuration of robot welding cell for SMEs under conditions of small and medium sized production using MIG/MAG processTalalaev, Robert; Sarkans, Martinš; Laansoo, Andres; Veinthal, RennoProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 591-596 : ill

Modelling of symmetry measurement uncertainty using Monte-Carlo methodKulderknup, EdiProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 496-499 : ill

Multi-pole modeling and intelligent simulation of technical chain systems (Part 1)Grossschmidt, Gunnar; Harf, MaitProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 458-463 : ill

Multi-pole modeling and intelligent simulation of technical chain systems (Part 2)Grossschmidt, Gunnar; Harf, MaitProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 464-471 : ill

Multistage manufacruring [i. e. manufacturing] planningKüttner, ReinProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 506-511 : ill

Offer management in the networking manufacturingRiives, Jüri; Lavin, Jaak; Karjust, Kristo; Koov, KasparProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 561-566 : ill

Potential eco-friendly wood protection systems used in royal processLiibert, Laura; Treu, Andreas; Kers, Jaan; Meier, PilleProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 674-679 : ill

Production technology elaboration and characterization of Al-MWCNT, Al-fullerenes and Al-B4C compositesKommel, Lembit; Metsvahi, Rainer; Mihhaltsenkov, M.Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 651-656 : ill

Reactive sintering of zirconium carbide based systemsYung, Der-Liang; Kollo, Lauri; Hussainova, Irina; Zikin, ArkadiProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 783-788 : ill

Real time production monitoring system in SMESnatkin, Aleksei; Karjust, Kristo; Eiskop, TanelProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 573-578 : ill

Relationships between business objectives and the actual outcome of the businessLavin, Jaak; Randmaa, MeriliProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 512-517 : ill

Sintering routes for zirconia doped hardmetalsVoltšihhin, Nikolai; Cura, M. Erkin; Hussainova, Irina; Hannula, Simo-PekkaProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 765-770 : ill

Software development platform for integrated manufacturing engineering systemRiives, Jüri; Karjust, Kristo; Küttner, Rein; Lemmik, Rivo; Koov, Kaspar; Lavin, JaakProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 555-560 : ill

Solution based processing for nanocarbidesUmalas, Madis; Reedo, Valter; Lõhmus, A.; Hussainova, IrinaProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 753-758 : ill

The effect of substrate microstructure on morphology of zinc coatingsSepper, Sirli; Peetsalu, Priidu; Mikli, Valdek; Saarna, MartProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 717-722 : ill

Two-body abrasive wear of WC-Co hardmetals in wet and dry environmentsPirso, Jüri; Juhani, Kristjan; Viljus, Mart; Letunovitš, SergeiProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 711-716 : ill

Ways of increasing synergy in engineering design teamworkKällo, Rommi; Eerme, Martin; Reedik, VelloProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 500-505 : ill

Wear protection of highly loaded components: advantages of plasma transferred arc welding as hardfacing technologyKatsich, Christian; Zikin, Arkadi; Badisch, EwaldProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 639-644 : ill

Workplace performance and capability optimization in the integrated manufacturingLõun, Kaia; Riives, Jüri; Otto, TaunoProceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering, 19-21st April 2012, Tallinn, Estonia. 22012 / p. 518-523 : ill