Marine technology and hydrodynamics
TalTech priority area
Research classification (Frascati)
Research into substances hazardous to the environment 1.9
Head of the research group
Research group member
Doctoral students
Keyword
advanced ship structures
fluid-structure interaction
ship safety
accidental limit states
material modeling
Overview
Our research focuses on on the behavior of smallcrafts, ships, and marine structures in normaland extreme environments. Therefore, we develop advanced computational methods andtools to assess ship structural and operationalperformance, safety and sustainability bothin open-water and Arctic (ice-covered waters)applications. In the field of the hydrodynamicsof small crafts and fluid-structure interaction,our research is supported by the experimentaltesting in our towing tank, where we deepenour understanding regarding ship behavior indifferent conditions. The goal is to increase energy efficiency and behaviour of small crafts in different operationalconditions. On the topic of ship and offshorestructures, we focus on the load response andfailure mechanisms of materials and weldedstructures under different loading scenarios,including accidental and ultimate limit states.We create tools tailored for the rapid assessment of large complex structures, which enableoptimization early in the conceptual designstage. We use numerical simulations to get insight into theoretical modeling and prevailingassumptions, while experiments provide thesupporting validation data. The simplificationsenabling computationally efficient calculationsare scientifically justified.
Related projects
Related department
Kuressaare college
Publications related to the research group
- Putranto, T., Kõrgesaar, M., Jelovica, J. Ultimate strength assessment of stiffened panels using Equivalent Single Layer approach under combined in-plane compression and shear // Thin-Walled Structures (2022) vol. 180, art. 109943.
https://doi.org/10.1016/j.tws.2022.109943 - Putranto, T., Kõrgesaar, M., Tabri, K. Application of equivalent single layer approach for ultimate strength analyses of ship hull girder // Journal of marine science and engineering (2022) vol. 10, 10, art. 1530.
https://doi.org/10.3390/jmse10101530 - Bergström, M., Browne, T., Ehlers, S., Helle, I., Herrnring, H., Khan, F., Kubiczek, J., Kujala, P., Kõrgesaar, M. et al. A comprehensive approach to scenario-based risk management for Arctic waters // Ship Technology Research (2022) vol. 69, 3, p. 129-157.
https://doi.org/10.1080/09377255.2022.2049967 - Hosseini, A., Tavakoli, S., Dashtimanesh, A., Sahoo, P. K., Kõrgesaar, M. Performance prediction of a Hard-Chine Planing Hull by employing different CFD models // Journal of marine science and engineering (2021) vol. 9, 5, art. 481, 26 p. : ill.
https://doi.org/10.3390/jmse9050481 - Kim, S.J., Kõrgersaar, M., Ahmadi, N. et al. The influence of fluid structure interaction modelling on the dynamic response of ships subject to collision and grounding // Marine structures (2021) vol. 75, art. 102875, 17 p. : ill.
https://doi.org/10.1016/j.marstruc.2020.102875 - Putranto, T., Kõrgesaar. M., Jelovica, J., Tabri, K., Naar, H. Ultimate strength assessment of stiffened panel under uni-axial compression with non-linear equivalent single layer approach // Marine structures (2021) vol. 78, art. 103004, 17 p. : ill.
https://doi.org/10.1016/j.marstruc.2021.103004 - Li, F., Kõrgesaar, M., Kujala, P. et al. Finite element based meta-modeling of ship-ice interaction at shoulder and midship areas for ship performance simulation // Marine structures (2020) vol. 71, art. 102736.
https://doi.org/10.1016/j.marstruc.2020.102736 - Ridwan, Prabowo, A. R., Muhayat, N., Putranto, T., Sohn, J. M. Tensile analysis and assessment of carbon and alloy steels using FE approach as an idealization of material fractures under collision and grounding // Curved and Layered Structures (2020) vol 7, 1, p. 188-198.
https://doi.org/10.1515/cls-2020-0016 - Ahmadi, N., Kõrgesaar, M. Analytical approach to investigate the effect of gas channel draft angle on the performance of PEMFC and species distribution // International journal of heat and mass transfer (2020) vol. 152, art. 119529.
https://doi.org/10.1016/j.ijheatmasstransfer.2020.119529 - Ridwan, Putranto, T., Laksono, F.B., Prabowo, A.R. Fracture and Damage to the Material accounting for Transportation Crash and Accident // Procedia Structural Integrity, vol. 27. : Elsevier, 2020. p. 38-45.
https://doi.org/10.1016/j.prostr.2020.07.006 - Tabri, K., Naar, H., Kõrgesaar, M. Ultimate strength of ship hull girder with grounding damage // Ships and offshore structures (2020) vol. 15, S1, p. S161-S175.
https://doi.org/10.1080/17445302.2020.1827631 - Kõrgesaar, M., Storheim, M. Treatment of bending deformations in maritime crash analyses // ASME 2020 : 39th International Conference on Ocean, Offshore and Arctic Engineering, August 3-7, 2020 : Virtual, Online : proceedings papers. [S.l.] : ASME, 2020. Paper No: OMAE2020-19272, V02AT02A017 ; 9 pages. (Structures, Safety, and Reliability ; Vol. 2A).
https://doi.org/10.1115/OMAE2020-19272 - Kim, S.-J., Kõrgersaar, M., Taimuri, G. et al. A Quasi-dynamic approach for the evaluation of structural response in ship collisions and groundings // Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering ConferenceShanghai, China, October 11-16, 2020. : International Society of Offshore and Polar Engineers, 2020. p. 3174–3180.
"Quasi-dynamic approach" - Liinalampi, S.; Jelovica, J.; Lillemäe-Avi, I.; Körgesaar, M.; Reinaldo Goncalves, B.; Varsta, P.; Remes, H.; Romanoff, J. Limit state analyses in design of thin-walled marine structures—some aspects on length-scales // Journal of offshore mechanics and arctic engineering (2020) vol. 142, 3, 8 p.
https://doi.org/10.1115/1.4045371 - Lakatoš, M., Sahk, T., Andreasson, H., Tabri, K. The effect of spray rails, chine strips and V-shaped spray interceptors on the performance of low planing high-speed craft in calm water // Applied Ocean Research (2022) Vol. 122, art. 103131.
https://doi.org/10.1016/j.apor.2022.103131 - Romanoff, J., Kõrgesaar, M., Remes, H. Emerging challenges for numerical simulations of quasi-static collision experiments on laser-welded thin-walled steel structures // Journal of marine science and application (2020) Vol. 19, 4, p. 567-583 : ill.
https://doi.org/10.1007/s11804-020-00174-y - Lakatoš, M., Tabri, K., Dashtimanesh, A. et al. Numerical modelling of a planing craft with a V-Shaped spray interceptor arrangement in calm water // HSMV 2020 : Proceedings of the 12th Symposium on High Speed Marine Vehicles. Amsterdam : IOS Press, 2020. p. 33-42. (Progress in marine science and technology ; 5).
https://doi.org/10.3233/PMST200024 - Putranto, T., Kõrgesaar, M. Numerical study on the structural behavior of intact and damaged box beams under four-point bending load // Developments in the Collision and Grounding of Ships and Offshore Structures : Proceedings of the 8th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2019), 21-23 October, 2019, Lisbon, Portugal. London : CRC Press, 2019. p. 139−143.
https://www.taylorfrancis.com/books/e/9781003002420/chapters/10.1201/9781003002420-17 - Tabri, K., Tõns, T., Suominen, M., Kõrgesaar, M. Ice-induced loads on offshore wind turbines in the Baltic Sea // Proceedings of the ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering. Volume 6: Polar and Arctic Sciences and Technology. New York : American Society of Mechanical Engineers (ASME), 2022. art. OMAE2022-79035, V006T07A022; 9 pages.
https://doi.org/10.1115/OMAE2022-79035 - Bergström, M., Browne, T., Ehlers, S., Helle, I., Herrnring, H., Khan, F., Kubiczek, J., Kujala, P., Kõrgesaar, M. et al. Scenario-Based Risk Management for Arctic Waters // Proceedings of the ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering. Volume 6: Polar and Arctic Sciences and Technology. New York : American Society of Mechanical Engineers (ASME), 2022. p. V006T07A004-01-V006T07A004-13.
https://doi.org/10.1115/OMAE2022-80767 - Putranto, T., Kõrgesaar, M. Numerical investigation on the buckling response of stiffened panel subjected to biaxial compression with non-linear equivalent single layer approach // 31st International Ocean and Polar Engineering Conference, ISOPE 2021 Virtual, Online 20 June 2021 through 25 June 2021 : proceedings of the International Offshore and Polar Engineering Conference. Mountain View, CA : International Society of Offshore and Polar Engineers, 2021. p. 2893−2900.
https://publications.isope.org/proceedings/ISOPE/ISOPE%202021/data/pdfs_Vol4/4206-21TPC-0462.pdf - Romanoff, J., Remes, H., Varsta, P., Kõrgesaar, M. et al. Limit state analyses in design of thin-walled marine structures - some aspects on length-scales // ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering
June 17–22, 2018, Madrid, Spain. : ASME, 2018. Paper No. OMAE2018-78304, p. V11BT12A047, 8 p.. (Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering ; vol. 11B).
http://doi.org/10.1115/OMAE2018-78304 - Berntsson, K., Kõrgesaar, M., Goncalves, B., Romanoff, J. On the influence of modelling a weld effect when optimizing thin-walled structures for crashworthiness // The 29th International Ocean and Polar Engineering Conference : 16-21 June 2019, Honolulu, Hawaii, USA. Cupertino, California, USA : International Society of Ocean and Polar Engineers (ISOPE), 2019. ISOPE-I-19-316, 8 p.
On the influence of modelling... - Kõrgesaar, M., Romanoff, J., St-Pierre, L., Varsta, P. Effect of weld modelling on crashworthiness optimization // Trends in the analysis and design of marine structures : proceedings of the 7th International Conference on Marine Structures (MARSTRUCT 2019, Dubrovnik, Croatia, 6-8 May 2019). London : Taylor & Francis Group, 2019. p. 231-237 : ill.
https://doi.org/10.1201/9780429298875 - Lakatoš, M., Sahk, T., Kaarma, R., Tabri, K., Kõrgesaar, M., Andreasson, H Experimental testing of spray rails for the resistance reduction of planing crafts // Trends in the analysis and design of marine structures : proceedings of the 7th International Conference on Marine Structures (MARSTRUCT 2019, Dubrovnik, Croatia, 6-8 May 2019). London : Taylor & Francis Group, 2019. p. 334–343 : ill.
https://www.scc.ee/ee/?mdocs-file=2121 https://doi.org/10.1201/9780429298875 - Kujala, P., Kõrgesaar, M., Kämäräinen, J. Evaluation of the limit ice thickness for the hull of various Finnish-Swedish ice class vessels navigating in the Russian Arctic // International journal of naval architecture and ocean engineering (2018) vol. 10, 3, p. 376-384 : ill.
https://doi.org/10.1016/j.ijnaoe.2018.02.004 - Prabowo, A. R., Sohn, J. M., Putranto, T. Crashworthiness performance of stiffened bottom tank structure subjected to impact loading conditions : ship-rock interaction // Curved and Layered Structures (2019) vol. 6, 1, p. 245–258 : ill.
https://doi.org/10.1515/cls-2019-0016 - Calle, M.A.G, Oshiro, R.E., Kõrgesaar, M. et al. Combined strain rate, mesh size and calibration test influence on structural failure : Miniature ship grounding test // Ocean engineering (2019) vol. 173, p. 215-226 : ill.
https://doi.org/10.1016/j.oceaneng.2019.01.002 - Prabowo, A.R., Putranto, T., Sohn, J.M. Simulation of the behavior of a ship hull under grounding : effect of applied element size on structural crashworthiness // Journal of Marine Science and Engineering (2019) Vol. 7, Issue 8, Art. 270.
https://doi.org/10.3390/jmse7080270 - Kõrgesaar, M. The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures // Marine structures (2019) vol. 63, p. 45-64 : ill.
https://doi.org/10.1016/j.marstruc.2018.08.004 - Ringsberg, J.W., Amdahl, J., Chen, B.Q., Kõrgesaar, M., Tabri, K. et al. MARSTRUCT benchmark study on nonlinear FE simulation of an experiment of an indenter impact with a ship side-shell structure // Marine structures (2018) vol. 59, p. 142-157.
https://doi.org/10.1016/j.marstruc.2018.01.010 - Kõrgesaar, M., Romanoff, J., Remes, H., Palokangas, P. Experimental and numerical penetration response of laser-welded stiffened panels // International journal of impact engineering (2018) vol. 114, p. 78-92 : ill.
https://doi.org/10.1016/j.ijimpeng.2017.12.014 - Jabbary, A., Rostami Arnesab, S., Samanipour, H., Ahmadi, N. Numerical investigation of 3D rhombus designed PEMFC on the cell performance // International journal of green energy (2021) vol. 18, 5, 17 p. : ill.
https://doi.org/10.1080/15435075.2020.1865361 - Julianto, R.I., Prabowo, A.R., Muhayat, N., Putranto, T., Adiputra, R. Investigation of hull design to quantify resistance criteria using holtrop's regression-based method and savitsky's mathematical model: A study case of fishing vessels // Journal of engineering science and technology (2021) vol. 16, 2, p. 1426-1443.
- Brubak, L., Hu, Z., Kõrgesaar, M., Schipperen, I., Tabri, K. Numerical simulations of grounding scenarios – benchmark study on key parameters in FEM modelling // Practical Design of Ships and Other Floating Structures : Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan, Vol. II. Singapore : Springer, 2020. p. 257-269. (Lecture notes in civil engineering ; 64).
https://doi.org/10.1007/978-981-15-4672-3_16 - Niazmand Bilandi, R., Mancini, S., Dashtimanesh, A., Lakatoš, M. How to improve full-scale self-propulsion simulations? A case study on a semi-displacement hull // HSMV 2023 : Proceedings of the 13th Symposium on High Speed Marine Vehicles. : IOS Press, 2023. p. 265-274. (Progress in marine science and technology ; 7).
https://doi.org/10.3233/PMST230034 - Romanoff, J., Kõrgesaar, M., Lehto, P., Berntsson, K., Remes, H. Experimental investigations on stiffened and Web-core sandwich panels made for steel under quasi-static penetration // Procedia Structural Integrity, Vol. 37, C. Amsterdam : Elsevier, 2021. p. 17-24 : ill.
https://doi.org/10.1016/j.prostr.2022.01.055 - Yatkin, M. A., Kõrgesaar, M. Fracture estimation based on deformation history with recurrent neural networks // 2023 International Conference on Machine Learning and Applications (ICMLA) : proceedings. Danvers : IEEE, 2023. p. 1025-1030.
https://doi.org/10.1109/ICMLA58977.2023.00152 - Yatkin, M. A., Kõrgesaar, M. Machine learning enabled identification of sheet metal localization // International journal of solids and structures (2024) vol. 288, art. 112592.
https://doi.org/10.1016/j.ijsolstr.2023.112592