Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
thermal stratification (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
3
Vaata veel..
(5/590)
Ekspordi
ekspordi kõik päringu tulemused
(3)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
nimi kasvavalt
nimi kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel kogumikus
Stratification and draught measurements of ceiling panels, underfloor cooling and fan-assisted radiators
Võsa, Karl-Villem
;
Eist, Egert
;
Kurnitski, Jarek
2022: CLIMA 2022 The 14th REHVA HVAC World Congress
2022
/
p. 1-8
https://doi.org/10.34641/clima.2022.170
artikkel kogumikus
2
artikkel kogumikus
Temperature calibration and Annual performance of cooling for ceiling panels
Seyed Salehi, Seyed Shahabaldin
;
Võsa, Karl-Villem
;
Kurnitski, Jarek
;
Thalfeldt, Martin
CLIMA 2022: the 14th REHVA HVAC World Congress, 22nd – 25th May in Rotterdam, The Netherlands
2022
/
p. 1-8
https://doi.org/10.34641/clima.2022.344
artikkel kogumikus
3
artikkel kogumikus
Validation of a zonal model to capture the thermal stratification in a room heated by a stove
Georges, Laurent
;
Thalfeldt, Martin
;
Skreiberg, Øyvind
Roomvent&Ventilation 2018 : Excellent Indoor Climate and High Performing Ventilation : proceedings
2018
/
p. 511–516 : ill
https://www.lyyti.fi/e/?p=s&k=76eA857eee2A33adcE00b0E
https://www.lyyti.fi/reg_att/efA658E7F74904eE7C/2665E4C9CB0B05edC44D.pdf
artikkel kogumikus
Kirjeid leitud 3, kuvan
1 - 3
pealkiri
428
1.
Validation of a zonal model to capture the thermal stratification in a room heated by a stove
2.
A Comparative study on cooling period thermal comfort assessment in modern open office landscape in Estonia
3.
A descriptive analysis of the linkage between the vertical stratification and current oscillations in the Gulf of Finland [Online resource]
4.
A descriptive analysis of the linkage between the vertical stratification and current oscillations in the Gulf of Finland [Online resource]
5.
A method of using miniature samples for determining mechanical properties of metal of power-generating equipment at thermal power stations in Estonia
6.
A modification of the classical Ekman model accounting for the Stokes drift and stratification effects
7.
A review on the thermal stability of calcium apatites
8.
A study of different aspects for building a thermal model for lithium-ion cells
9.
A tabulated sizing method for the early stage design of geothermal energy piles including thermal storage
10.
A techno-economic simulation model to reveal the relevance of construction process impact factors for External Thermal Insulation Composite System (ETICS)
11.
About thermal low-temperature processing of oil shale by solid heat carrier method
12.
Advances in the one-step synthesis of 2D and 3D sulfide materials grown by pulsed laser deposition assisted by a sulfur thermal cracker
13.
Air tightness and thermal bridges of Estonian lightweight timber-frame detached houses
14.
Airtightness and thermal bridges of 32 lightweit detached houses
15.
ALD applied to conformal rare-earth coating of ZnO nanoparticles for low temperature thermal imaging applications
16.
An optimal solution of thermal energy usage in the integrated system of stormwater collection and domestic-water heating
17.
Analysis of on-site construction processes for effective external thermal insulation composite system (ETICS) installation
18.
Analytical thermal model and flow network analysis suitable for open self-ventilated machines
19.
Anisotropic thermal conduction in hierarchically structured composite using graphene-augmented alumina nanofibers
20.
Application of composite thermal sprayed coatings
21.
Application of Differential Thermal Analysis for enthalpy evaluation of reactions during Copper Zinc Tin Selenide synthesis process
22.
Application of thermal analyses for historical building ceramics
23.
Application of thermal analysis in the preparation and characterization of super conducting YBa2(Cu1-xCrx)4O8 oxides
24.
Application of thermal analysis techniques for studing the possibilities of utilization of oil shale ashes formed at electriciy production in Estonia
25.
Application of thermal analysis to study vaporization parameters of narrow boiling range oil fractions
26.
Atomistic molecular simulation of thermal volume expansion of Estonian kukersite kerogen
27.
Automatic evaluation of the structure parameters of WC-Co thermal spray coating by image analysis techniques
28.
Bare overhead conductor thermal rating calculation on the example of Estonian OHL
29.
Building ceramics with an addition of pulverized combustion fly ash from the thermal power plant Nováky
30.
Building cluster optimization to integrate energy performance and outdoor thermal comfort
31.
Calculation and compliance procedures of thermal bridges in energy calculations in various European countries
32.
Calculation technique for evaluating metal random oscillating thermal stress parameters
33.
Catalytic thermal liquefaction of oil shale in tetralin
34.
Changes in thermal behaviour of aminoresins at storage
35.
Changes in thermal energy consumption in apartment buildings of Estonia
36.
Characterization of composite thermal spray powders
37.
Characterization of WC-Co composite thermal spray powder and coating
38.
Characterization of WC-Co composite thermal spray powders and coatings
39.
Characterization of WC-Co thermal spray coatings based on the composite powders
40.
Coefficient of thermal expansion, modulus of elasticity and residual stresses of some powder coatings
41.
Commissioning of thermal performance of prefabricated timber frame insulation elements for nZEB renovation
42.
Comparative study of siox layers deposition using thermal and uv-assisted curing of perhydropolysilazane
43.
Comparative study of the thermal behavior of mechanoactivated natural carbonate substituted apatites from Africa (Tunisia), Europe (Bulgaria, Estonia), and Asia (Uzbekistan)
44.
Comparative study of using periodic daily and long-term weather data for cooling system sizing and impact of thermal mass
45.
Comparative thermal analysis of Estonian carbonaceous rocks
46.
Comparison of mineral wool, cellulose and reed mat for interior thermal insulation of log walls
47.
Comparison of thermal performance of mineral wool and reflective insulation on internally insulated log wall
48.
Compliance with summer thermal comfort requirements in apartment buildings
49.
Composite powders based on iron self-fluxing alloy and recycled cermet powders for thermal spray
50.
Composite powders for thermal spray
51.
Composition of oil shale ashes from pulverized firing and circulating fluidized-bed boiler in Narva Thermal Power Plants
52.
Construction process technical impact factors on degradation of the external thermal insulation composite system
53.
Cooling thermal comfort and efficiency parameters of ceiling panels, underfloor cooling, fan-assisted radiators, and fan coil
54.
Cost of non-inclusiveness : social stratification and failure of the EU competitive market [Electronic resource]
55.
Coupled thermal analysis of novel alumina nanofibers with ultrahigh aspect ratio
56.
Critical values for the temperature factor to assess thermal bridges
57.
Damping characteristics of interconnected power systems with wind-photovoltaic-thermal-bundled power transmitted by AC/DC systems
58.
Data generative machine learning model for the assessment of outdoor thermal and wind comfort in a northern urban environment
59.
Decomposition mechanism of hydroxyfluorapatite in phosphoric acid - thermal treatment
60.
Decomposition mechanism of xydroxyfluorapatite in phosphoric acid-thermal treatment
61.
Delayed ettringite formation in thermal hardened mortars
62.
Densities, viscosities, and thermal conductivities of the ionic liquid 7-Methyl-1,5,7-triazabicyclo[4.4.0]dec-5-enium acetate and its mixtures with water
63.
Department of Thermal Engineering
64.
Department of Thermal Engineering 1918-2007 : engineers' teaching, graduated, research activities, publications
65.
Determination of circulating fluidized bed boiler thermal efficiency burning oil shale with different properties
66.
Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method
67.
Determination of the changes in the fractional composition of kukersite retorting oil occuring at varied conditions of thermal modification
68.
Determination of thermal convection coefficient from coil's flat plate side
69.
Determining the thermal conductivity of additively manufactured metal specimens
70.
Developing a novel method for using thermal analysis to determine average boiling points of narrow boiling range continuous mixtures = Uudse termilise analüüsi meetodi arendamine kitsaste keemispiiridega pidevate segude
71.
Development of analytical thermal analysis tool for synchronous reluctance motors
72.
Development of thermal analysis tools for synchronous reluctance motors = Soojusanalüüsi töövahendi väljaarendus sünkroon-reluktantsmootorile
73.
Differential thermal analysis for estimation of the thermal stability of NPK fertilizers
74.
Differential-thermal analysis for estimating the thermal stability of the NPK-fertilizers
75.
Digital stratification in Estonia : users and non-users of the Internet
76.
Double-cemented recycled hardmetal based powders for thermal spray
77.
Dry desulphurization of the flue gases at oil shale thermal power plants
78.
Editorial - IEA-ECES Annex 31 special issue on thermal energy storage
79.
Efect of ozonation on the thermal behaviour and morphology state of high-density polyethylene
80.
Effect of alkylsulfonate on thermal behavior and structure of high-density polyethylene
81.
Effect of the concentration of organic matter on the yield of thermal bitumen from the Baltic oil shale kukersite
82.
Effect of thermal spraying method on the microstructure and wear behaviour of FeNiCrBSiC-CrB2 coating
83.
Effective thermal conductivity of graphite powder in helium medium
84.
Effects of environmental conditions on the performance of thermal imagers
85.
Efficiency of pipes thermal insulation in Estonian district heating networks [Electronic resource]
86.
Electro-thermal simulations and forward surge current failure prediction for SiC diodes
87.
Emission of sulphur dioxide during thermal treatment of fossil fuels
88.
Energy and buildings. Vol. 106, SI, IEA-ECES Annex 31 special issue on thermal energy storage
89.
Erosion and impact wear resistance of thermal sprayed coatings
90.
Erosion and impact wear resistance of thermal sprayed coatings [Electronic resource]
91.
Estimation of energy-saving potential and indoor thermal comfort by the central control of the heating curve in old apartment buildings
92.
Estimation of thermal insulation efficiency of Estonian district heating networks
93.
Evaluating outdoor thermal comfort using a mixed-method to improve the environmental quality of a university campus
94.
Evaluation of accumulated fatigue in metals due to random oscillating thermal stress
95.
Evaluation of accumulated fatigue in metals due to random oscillating thermal stresses
96.
Evaluation of the criticality of thermal bridges
97.
Evaluation of the thermal bridges of prefabricated concrete large-panel and brick apartment buildings in Estonia
98.
Evolved gas analysis at thermal treatment of oil shales by TG-FTIR
99.
Evolved gas analysis at thermal treatment of some solid fossil fuels
100.
Experimental determination of graphite powder thermal diffusivity coefficient
101.
Experimental determination of graphite powder's thermal diffusivity coefficient
102.
Experimental determination of radiator, underfloor and air heating emission losses due to stratification and operative temperature variations
103.
Experimental efficiency and thermal parameters evaluation in Full-SiC Quasi-Z-Source inverter
104.
Explosive thermal reduction of graphene oxide-based materials : mechanism and safety implications
105.
Feasibility of thermal energy storage integration into biomass CHP-based district heating system
106.
Field study of hygrothermal performance of log wall with internal thermal insulation
107.
Fluorhydroxyapatites of Northern Europe and their thermal transformations
108.
Formation of Ca-Zn-Na phosphate bioceramic material in thermal processing of EDTA sol-gel precursor
109.
Formation of CuInS2 in spray pyrolysis as simulated by thermal analysis
110.
Formation of thermal fatigue cracks in periodic rapid quenching of metal
111.
Gas-phase photocatalytic and thermal oxidation of methyltertbutyl ether and tert-butyl alcohol at TiO2 surface
112.
Generalized sum rule for thermal and residual stresses in axisymmetric glass articles
113.
Growth, thermal stability, and magnetic properties of Co films on Ni3Al(001)
114.
Heat recovery from exhaust air as a thermal storage energy source for geothermal energy piles
115.
Heating rate efect on the thermal behaviour of some clays and their mixtures with oil shale ash additives
116.
Heating rate effect on the thermal behavior of ammonium nitrate and its blends with limestone and dolomite
117.
Heating rate effect on the thermal behavior of some clays and their blends with oil shale ash additives
118.
Heating rate effect on the thermal behaviour of ammonium nitrate and its blends with limestone and dolomite
119.
High velocity thermal sprayed coatings from hardmetal powders
120.
Hoone piirdetarindi soojusläbivuse arvutusjuhend. Osa 1, Välisõhuga kontaktis olev läbipaistmatu piire [Võrguteavik] = Guidance for calculation of thermal transmittance of building envelope. Part 1, Opaque building envel
121.
Hoonete energiatõhusus [Võrguteavik] : hoonete ventilatsioon. Osa 1, Sisekeskkonna lähteandmed hoonete energiatõhususe projekteerimiseks ja hindamiseks, lähtudes siseõhu kvaliteedist, soojuslikust keskkonnast, valgustuse
122.
Hoonete energiatõhusus [Võrguteavik] : hoonete ventilatsioon. Osa 1, Sisekeskkonna lähteandmed hoonete energiatõhususe projekteerimiseks ja hindamiseks, lähtudes siseõhu kvaliteedist, soojuslikust keskkonnast, valgustuse
123.
House thermal behaviour simulation with CoCoViLa
124.
HVOF thermal spray coatings of different powders
125.
Hybrid thermal model of a synchronous reluctance machine
126.
Impact erosive wear resistance of thermal sprayed WC-Co coatings
127.
Impact of high energy milled activation on the thermal properties of Bulgarian and Estonian natural apatites
128.
Impact of LED thermal stability to household lighting harmonic load current modeling
129.
Impact of linear thermal bridges on thermal transmittance of renovated apartment buildings
130.
Impact of wind parks on power system containing thermal power plants = Tuuleparkide mõju soojuselektrijaamadega energiasüsteemile
131.
Impact of wind parks on the efficiency of thermal power plants [Electronic resource]
132.
Impacts of large scale wind integration on the Baltic region’s thermal power plant economics and electricity market in 2025 [Electronic resource]
133.
Improving CHP flexibility by integrating thermal energy storage and power-to-heat technologies into the energy system
134.
Increasing construction quality of External Thermal Insulation Composite System (ETICS) by revealing on-site degradation factors
135.
Influence of cellulose content on thermal properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose composites
136.
Influence of cellulose stearate (CS) content on thermal and rheological properties of poly(lactic acid)/CS composites
137.
Influence of lime-containing additives on the thermal behaviour of ammonium nitrate
138.
Influence of lime-containing additives on the thermal behaviour of urea
139.
Influence of silicic acid and glauconite on thermal dehydration of Ca(H2PO4)2.H2O
140.
Influence of SiO2 on the thermal behavior of high-energy activated natural phosphorites
141.
Influence of some lime-containing additives on the thermal behavior of urea
142.
Influence of the post-granulation treatment on the thermal behaviour and leachability characteristics of Estonian oil shale ashes
143.
Influence of the post-granulation treatment on the thermal behaviour of Estonian oil shale ashes
144.
Influence of the secondary thermal annealing on the properties of CdTe/CdS:CdCl2:O2 structure
145.
Influence of thermal pre-treatment on mesophilic anaerobic digestion of sludges
146.
Influence of thermal processing on the structure of hydroxyapatite
147.
Influence of waste products from electricity and cement industries on the thermal behaviour of Estonian clay from Kunda deposit
148.
In-situ thermal performance monitoring of Pharma 4.0 Flow Bioreactors
149.
Interaction of low-level microwave radiation with nervous system - a quasi-thermal effect?
150.
Internal geochemical stratification of bentonites (altered volcanic ash beds) and its interpretation = Bentoniitide (muutunud vulkaanituhkade) geokeemiline isestratifikatsioon ja selle interpretatsioon
151.
Internal stratification of two thick Ordovician bentonites of Estonia : deciphering primary magmatic, sedimentary, environmental and diagenetic signatures
152.
Investigation of elastic and inelastic properties of Estonian clay from a locality in Kunda during thermal treatment
153.
Investigation of phase transformations in thermal processing of phosphate rock
154.
Investigation of the evolution of sulphur during the thermal degradation of different oil shales
155.
Investigation of thermal decomposition of used tires
156.
Journal of thermal stresses
157.
Keskkonna soojuslikud omadused : mõõtevahendid füüsikaliste suuruste mõõtmiseks = Ergonomics of the thermal environments Instruments for measuring physical quantities (ISO 7726:1998) [Võrguteavik]
158.
Laser ablation and thermal evaporation of thin films and structures
159.
Linkage between the vertical stratification and current oscillations in the Gulf of Finland
160.
Linking the development of stratification with the variability of velocity profiles in the Gulf of Finland
161.
Lipoxygenase-allene oxide synthase pathway in octocoral thermal stress response
162.
Long-term changes in stratification in the Baltic Sea
163.
Madalpingelised elektripaigaldised. Osa 4-42, Kaitseviisid. Kaitse kuumustoime eest [Võrguteavik] = Low-voltage electrical installations. Part 4-42, Protection for safety. Protection against thermal effects
164.
Madalpingelised elektripaigaldised. Osa 4-42, Kaitseviisid. Kaitse kuumustoime eest [Võrguteavik] = Low-voltage electrical installations. Part 4-42, Protection for safety. Protection against thermal effects (IEC 60364-4-
165.
Madalpingelised elektripaigaldised. Osa 4-42, Kaitseviisid. Kaitse kuumustoime eest [Võrguteavik] = Low-voltage electrical installations. Part 4-42, Protection for safety. Protection against thermal effects (IEC 60364-4-
166.
Madalpingelised elektripaigaldised. Osa 4-42, Kaitseviisid. Kaitse kuumustoime eest = Low-voltage electrical installations. Part 4-42, Protection for safety. Protection against thermal effects (IEC 60364-4-42:2010, modif
167.
Management study of low-temperature water in the urban environment as a potential thermal-energy source
168.
Measurement of thermal conductivity of moist porous building materials
169.
Mechanism of abrasion-erosion wear of thermal sprayed coatings
170.
Mechanism of changes in the properties of chemically deposited CdS thin films induced by thermal annealing = Keemiliselt sadestatud CdS õhukeste kilede omaduste muutumise mehhanism termilisel lõõmutamisel
171.
Mechanism of molten phose actron of thermal recrystallization of powder materials
172.
Metal oxide nanoparticles embedded in rare-earth matrix for low temperature thermal imaging applications
173.
Metallic powders for thermal spray produced by disintegrator milling
174.
Metal-matrix cermet reinforced composite powders for thermal spray
175.
Metal-matrix hardmetal/cermet reinforced composite powders for thermal spray
176.
Method for improving the quality of middle-heavy shale oil and for increasing commodity output at thermal processing of fuels in the solid heat carrier unit
177.
Methodological framework to assess the significance of External Thermal Insulation Composite System (ETICS) on-site activities
178.
Microstructural aspects of thermal sprayed WC-Co coatings and Ni-Cr coated steels = WC-Co termopinnete ja Ni-Cr pinnatud teraste metallograafilised aspektid
179.
Microstructure and thermal properties of quasi-equal rare earth substitution Y0.5Gd0.5Ba2Cu3O6.94 superconductor
180.
Microwave antenna of thermal radiometer for medical diagnostics
181.
Mid‐winter stratification formation in the Gulf of Finland
182.
Mission profile resolution impacts on the thermal stress and reliability of power devices in PV inverters
183.
Modeling of flux composition for thermal CdCl2:O2 annealing of polycrystalline CdTe
184.
Modelling of control systems and optimal operation of power units in thermal power plants = Energiaplokkide juhtimissüsteemide modelleerimine ja talitluse optimeerimine soojuselektrijaamades
185.
Modelling the irradiated upper atmospheres of unevolved companions in precataclysmic binaries (PCB) : evidences on thermal instability
186.
Monitoring of the electroosmotic flow of ionic liquid solutions in non-aqueous media using thermal marks
187.
Monitoring of the evolved gases by FTIR spectroscopy in apatite-ammonium sulfate thermal reactions
188.
Monitoring of the evolved gases in apatite-ammonium sulfate thermal reactions
189.
Nanosized molybdenum carbide synthesized by solution combustion synthesis with subsequent thermal treatment
190.
new method to estimate point thermal transmittance based on combined two-dimensional heat flow calculation
191.
Non-thermal effect of microwave radiation on human brain
192.
Nordic and Baltic wind generation influence to Estonian thermal power plants production
193.
Novel combination of thermal analysis and SALS for investigation into crystallisation behaviour of polymers
194.
Novel thermal spray powders for corrosion and wear resistant coatings
195.
Novel wear resistant WC-based thermal sprayed coatings
196.
novel workflow for early design stages to ensure daylight and summer thermal comfort in buildings = Uudne töövoog projekteerimise algfaasis, et tagada päevavalgus ja suvine soojusmugavus hoonetes
197.
Oil shale energy and some alternatives in Estonia : an academic lecture delivered by prof Ilmar Öpik at the Thermal Engineering Department of Tallinn Technical University on Dec. 14, 2000 to mark the 120 semesters since
198.
On design principles and calculation methods related to air leakages and thermal bridges in well-insulated building envelopes = Õhulekete ja külmasildade mõju hindamise ja arvutamise põhimõtted hästi soojustatud piirdeta
199.
On optimal active and reactive load planning of thermal power plants considering probabilistic information
200.
On residual and thermal stresses in powder coatings
201.
Opportunities and challenges of utilizing additive manufacturing approaches in thermal management of electrical machines
202.
Optical and photoelectric properties of nanolamellar structures obtained by thermal annealing of InSe plates in Zn vapours
203.
Optimal planning of electric power generation in thermal power system
204.
Optimal reactive power control in a multi-machine thermal power plant
205.
Optimization of thermal power plants operation
206.
Optimum morphology of green sidewalk on thermal comfort and air pollution
207.
Optimum Morphology of Green Sidewalk to Control Pollution and Thermal Comfort
208.
PAHs in leachates from thermal power plant wastes and ash-based construction materials
209.
PCSP's diagonal tie connectors thermal bridges impact on energy Pperformance and operational cost : case study of a high-Rrise Rresidential building in Estonia
210.
Peculiarities of heat balance and thermal efficiency estimations at oil shale combustion
211.
Performance and feasibility analysis of electricity price based control models for thermal storages in households
212.
Photovoltaic structures by thermal annealing of electrodeposited CuInSe2 in H2S
213.
Photovoltaic structures formed by thermal annealing of electrodeposited CuInSe2 in H2S
214.
Physico-chemical transformations during thermal treatment of phosphorites and solubility of the products
215.
Pluses and minuses of thermal analysis for determining vapour pressure of narrow boiling range oil fractions
216.
Post-deposition thermal treatment of sprayed SnS films
217.
Post-deposition thermal treatment of sprayed SnS films [Online resource]
218.
Potential effects of permeable and hygroscopic lightweight structures on thermal comfort and perceived IAQ in a cold climate
219.
Power losses analysis in thermal design of a synchronous reluctance motor
220.
Precursor for calcium hydroxyapatite : thermal analysis of xerogel prepared with DCTA as complexing agent
221.
Preparation and characterization of superconducting YBa2(Cu1-xCrx)4O8 oxides by thermal analysis
222.
Problems of desulfurization of flue gas at Estonian and Baltic thermal power plants
223.
Production of CuInSe2 thin films by thermal annealing of electrochemically deposited elemental copper, indium and selenium layers
224.
Production of thermal spray Cr3C2-Ni powders by mechanically activated synthesis
225.
Properties of thermal probes with heat pipe cooling system
226.
Quasi-thermal effect of microwave radiation
227.
Random thermal stress oscillations and fatigue life estimation for steam generator tubes
228.
Rapid characterisation and investigation of oil shales by thermal desorption-pyrolysis-GC/MS using multi-functional pyrolyzer
229.
Rapid water quenching and formation of thermal fatigue cracks on tube surface
230.
Reconstruction of an orthotropic thermal conductivity from non-local heat flux measurements
231.
Recycled hardmetal-based powders for thermal spray
232.
Reliability of electric power generation in power systems with thermal and wind power plants
233.
Reliability of interior thermal insulation as a retrofit measure in historic wooden apartment buildings in cold climate
234.
Research on the thermal stability of a solid modified resorcinol-alkylresorcinolformaldehyde resin
235.
Residential thermal energy storage development
236.
Residual stresses in different thermal spray coatings
237.
Residual stresses in some thermal sprayed coatings
238.
Residual stresses, modulus of elasticity and coefficient of thermal expansion of some powder coatings
239.
Respiratory infection risk based ventilation and room conditioning design method with year-round thermal comfort control in modern office buildings
240.
Review of thermal analysis of permanent magnet assisted synchronous reluctance machines
241.
review on potential use of low-temperature water in the urban environment as a thermal-energy source
242.
Role of A-site (Sr), B-site (Y), and A, B sites (Sr, Y) substitution in lead-free BaTiO3 ceramic compounds : structural, optical, microstructure, mechanical, and thermal conductivity properties
243.
Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process : A particle-scale DEM – CFD – CA approach
244.
Self-learning model predictive control for dynamic activation of structural thermal mass in residential buildings
245.
Shale gasoline thermal conductivity : experimental data and estimates from correlations for petroleum and coal liquids
246.
Short-term planning of active power generation in hydro-thermal power system under incomplete information
247.
SHS-derived powders obtained by coupled reactions and thermal dilution for subsequent consolidation
248.
Simple model for thermal spreading impedance
249.
Simulation and analysis of thermal performance of an apartment building
250.
Single and two-stage anaerobic mesophilic sludge digestion with thermal pre-treatment
251.
Sol-gel derived TiO2 : thermal decomposition of acetylacetonate-modified titanum (IV) isopropoxide
252.
Solid particle erosion of thermal sprayed coating
253.
Solid particle erosion of thermal sprayed coatings
254.
Special issue: 9th International Congress on thermal Stresses : Budapest, June 6-9, 2011 : invited lectures
255.
Spurious activation assessment of thermal power plant's safety-instrumented systems
256.
Steady-state thermal model of a synchronous reluctance motor
257.
Steady-state thermal modeling of salient pole synchronous generator
258.
Stratification and draught measurements of ceiling panels, underfloor cooling and fan-assisted radiators
259.
Stratification has strengthened in the Baltic Sea - an analysis of 35 years of observational data [Online resource]
260.
Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layers
261.
Structural and optoelectronic properties of CdCl2 activated CdTe thin films modified by multiple thermal annealing
262.
Structural changes in CBD CdS: effect of rapid thermal annealing
263.
Structural changes in chemically deposited CdS : effect of thermal annealing
264.
Structure and thermal behaviour of dichlorobis(thiourea)cadmium(II), a single-source precursor for CdS thin films
265.
Structure and thermal stability of pyruvated carrageenans from the red alga Coccotylus truncatus
266.
Studies on thermochemistry and thermal processing of apatite
267.
Study of composition and thermal treatments of quaternary compounds for monograin layer solar cells = Päikesepatareides kasutatavate monoterapulbriliste nelikühendite koostise ja termotöötluste uurimine
268.
Study of rubber waste thermal processing
269.
Study of thermal properties of synthetic resins based on oil shale alkylresorcines
270.
Substitution of the Methionine Axial Ligand of the T1 copper for the fungal-like Phenylalanine Ligand (M298F) causes local structural perturbations that lead to thermal instability and reduced catalytic efficiency of the
271.
Summer thermal comfort : compliance assessment and overheating prevention in new apartment buildings in Estonia
272.
Summer thermal comfort compliance assessment in apartment buildings
273.
Summer thermal comfort in new and old apartment buildings
274.
Synthesis and thermal transformations of Ca, Mg - carbonateapatite
275.
Synthesis and thermal transformations of Ca, Mg-carbonateapatite
276.
Synthesis and thermal transformations of Ca-, Mg-carbonateapatite
277.
Technology and characterization of composite thermal spray powders
278.
Tehniliste paigaldiste termiline isoleerimine [Võrguteavik] : torustikud, mahutid ja seadmed. Soojusisolatsiooni teostus = Thermal insulation of technical equipment : insulation of pipes, vessels and equipment. Applicati
279.
Tehniliste paigaldiste termiline isoleerimine. Osa 1, Torustikud, mahutid ja seadmed. Isolatsioonimaterjalid ja -elemendid [Võrguteavik] = Thermal insulation of technical equipment. Part 1, Insulation of pipes, vessels a
280.
Tehniliste paigaldiste termiline isoleerimine. Osa 6, Torustikud, mahutid ja seadmed. Külmaisolatsioon [Võrguteavik] = Thermal insulation of technical equipment. Part 6, Insulation of pipes, vessels and equipment. Cold i
281.
Termolõikamine [Võrguteavik] : termolõigete klassifitseerimine. Toote geomeetrilised spetsifikatsioonid ja kvaliteedi tolerantsid = Thermal cutting : classification of thermal cuts. Geometrical product specification and
282.
TG-FTIR/MS analysis of thermal and kinetic characteristics of some coal samples
283.
TG-FTIR-/MS analysis of thermal and kinetic characteristics of some coal samples
284.
The compasion of Estonian oil shale thermal treatment process by BAT criteria
285.
The composition and reactivity of different oil shales and the products formed during thermal treatment = Erinevate põlevkivide koostis ja reaktiivsus ning nende termilisel töötlusel tekkivad produktid
286.
The composition and structure investigation of recycled hardmetal powders for thermal spray
287.
The distribution of the air leakage places and thermal bridges in Finnish detached houses and apartment buildings
288.
The distribution of the air leakage places and thermal bridges of different types of detached houses and apartment buildings
289.
The economic relevance of on-site construction activities with the external thermal insulation composite system (ETICS)
290.
The effect of build direction on the thermal conductivity of additively manufactured AIS10Mg and silicon-steel samples
291.
The effect of flanking element length in thermal bridge calculation and possible simplifications to account for combined thermal bridges in well insulated building envelopes
292.
The effect of spark plasma sintering thermal cycle on behaviour of Fe-based hardfacings reinforced with WC and WC-based hardmetal
293.
The effect of temperature and humidity on the permanence of external thermal insulation composite systems
294.
The effect of thermal transmittance of building envelope and material selection of wind barrier on moisture safety of timber frame exterior wall
295.
The emission of sulphur dioxide during thermal treatment of some fossil fuels
296.
The final meltdown of dead-ice at the Holocene Thermal Maximum (8500–7400 cal. yr BP) in western Latvia, eastern Baltic
297.
The impact of oil shale calorific value on CFB boiler thermal efficiency and environment = Põlevkivi kütteväärtuse mõju keevkihtkatla efektiivsusele ja keskkonnale
298.
The impact of seasonal changes in stratification on the dynamics of internal waves in the Sea of Okhotsk
299.
The influence of lime-containing additives on the thermal behaviour of ammonium nitrate
300.
The influence of limestone-dolomite additives on the thermal behavior of ammonium nitrate
301.
The potential of thermal energy storage technologies in district heating system in Estonia
302.
The resistance to corrosion and corrosion-thermal fatigue to chromised tubes
303.
The use of thermal energy storage for energy system based on cogeneration plant
304.
Thermal analyses of blends of hyperbranched linear low-density polyethylene (LLDPE) with high-density polyethylene and LLDPE prepared by dissolving method
305.
Thermal analysis in studies of apatite structure
306.
Thermal analysis of a disposable, instrument-free DNA amplification lab-on-a-chip platform
307.
Thermal analysis of a SynRM using a thermal network and a hybrid model
308.
Thermal analysis of CdTe : CdCl2 : O2 annealing process
309.
Thermal analysis of crystallization behaviour of polyethylene copolymers and their blends = Polüetüleeni kopolümeeride ja nende segude kristallisatsioonikäitumise termiline analüüs
310.
Thermal analysis of electromagnetic levitation coil [Electronic resource]
311.
Thermal analysis of Israeli phosphorites
312.
Thermal analysis of Israeli phosphorites with determination of the evolved gases
313.
Thermal analysis of oxy-combustion of Estonian oil shale : kinetics of process stages
314.
Thermal analysis of refuse-derived fuel briquetees manufactured by different technologies
315.
Thermal analysis of salient pole synchronous machines by multiple model planes approach
316.
Thermal analysis of synthetic biomimic apatites
317.
Thermal analysis of the PM generator with outer rotor for wind turbine application
318.
Thermal analysis of totally enclosed fan cooled synchronous reluctance motor-state of art
319.
Thermal analysis of xerogel for calcium hydroxyapatite thin films preparation
320.
Thermal analysis with determination of the evolved gases of Israel phosphorites
321.
Thermal and kinetic characteristics of some oil shale samples
322.
Thermal and mechanical properties of composites based on treated lignocellulosic fibres
323.
Thermal and microstructural analysis of doped alumina nanofibers
324.
Thermal and rheological properties of composites based on poly(lactic acid) and cellulose derivatives
325.
Thermal annealing effect on structural and electrical properties of chemical bath-deposited CdS films
326.
Thermal annealing of sequentially deposited SnS thin films
327.
Thermal behavior of ceramic bodies based on Estonian clay from the Arumetsa deposit with oil shale ash and clinker dust additives
328.
Thermal behavior of Estonian graptolite–argillite from different deposits
329.
Thermal behavior of some Estonian clays and their mixtures with oil shale ash additives
330.
Thermal behaviour of ammonium nitrate prills coated with limestone and dolomite powder
331.
Thermal behaviour of bone apatite of Recent pike (Esox lucius L.)
332.
Thermal behaviour of Estonian phosphorites from different deposits
333.
Thermal behaviour of hydroxymethyl compounds as models for adhesive resins
334.
Thermal behaviour of hydroxymethyl compounds as models for adhesive resins [Electronic resource]
335.
Thermal behaviour of melamine-modified urea-formaldehyde resins
336.
Thermal behaviour of melamine-urea-formaldehyde resins
337.
Thermal behaviour of modified phenol-formaldehyde resins [Electronic resource]
338.
Thermal behaviour of modified urea-formaldehyde resins
339.
Thermal behaviour of precursors for CuInS2 thin films deposited by spray pyrolysis
340.
Thermal behaviour of some Estonian clays and their mixtures with oil shale ash additives
341.
Thermal behaviour of stored aminoresins
342.
Thermal behaviour of urea-formaldehyde resins
343.
Thermal behaviour of urea-formaldehyde resins during curing
344.
Thermal bridge effect of vertical diagonal tie connectors in precast concrete sandwich panels : an experimental and computational study
345.
Thermal comfort and draught assessment in a modern open office building in Tallinn
346.
Thermal conductivity of kraft recovery boiler deposits and its influence on the thermal efficiency of boiler furnace
347.
Thermal decomposition of cadmium and copper thiocarbamide chlorides
348.
Thermal decomposition of cadmium, zinc and copper thiocarbamide chlorides
349.
Thermal decomposition of calcium sulfate in carbon monoxide
350.
Thermal decomposition of copper(I) thiocarbamide chloride hemihydrate
351.
Thermal decomposition of dichlorobis(thiourea)cadmium(II) in inert and oxidative atmosphere
352.
Thermal decomposition of tris(O-ethyldithiocarbonato)-antimony(III)—a single-source precursor for antimony sulfide thin films
353.
Thermal decomposition study of HAuCL4.3H2O and AgNO3 as precursors for plasmonic metal nanoparticles
354.
Thermal decomposition study of HAuCl4·3H2O and AgNO3 as precursors for plasmonic metal nanoparticles
355.
Thermal degradation and mechanical properties of biofiber-reinforced polyethylene composites
356.
Thermal degradation of inorganic salts
357.
Thermal degradation of polyethylene
358.
Thermal dehydration of the mixture of calcium dihydrogen phosphate and glauconite
359.
Thermal dissolution of Estonian oil shale
360.
Thermal effects by firing oil shale fuel in CFB boilers
361.
Thermal efficiency of heating surface with riblets
362.
Thermal Engineering Department of Tallinn Technical University
363.
Thermal expansion behavior of Al–xSi alloys fabricated using selective laser melting
364.
Thermal extraction of oil from a Utah Green River (USA) oil shale in autoclaves
365.
Thermal interactions between apatites and SO2
366.
Thermal investigations of microsystems
367.
Thermal management of a SynRM for traction application
368.
Thermal marks as a signal processing aid for a portable capillary electropherograph
369.
Thermal mass and energy recovery utilization for peak load reduction panel
370.
Thermal model of a synchronous reluctance motor
371.
Thermal model of building integrated air type photovoltaic-thermal system under varying conditions
372.
Thermal modeling of a TEFC synchronous reluctance motor
373.
Thermal modelling of a control center for flexibility analysis in nZEB nanogrids
374.
Thermal network simulation of heat pump aggregated energy flexibility
375.
Thermal operation of oil shale boiler furnaces
376.
Thermal performance of ETICS, energy activated with PCM and PV
377.
Thermal performance of evacuated tube and flat plate solar collectors in Nordic climate conditions
378.
Thermal performance of prefabricated multistory houses in Tallinn, Estonia, based on IR survey
379.
Thermal performance of typical residental buildings
380.
Thermal power engineering
381.
Thermal power plant cooperation with wind turbines
382.
Thermal processes for utilizing waste phosphogypsum
383.
Thermal processes of dictyonema argillite and kukersite oil shale : transformation and distribution of sulfur compounds in pilot-scale Galoter process
384.
Thermal processing of phosphogypsum
385.
Thermal processing of polyvinylchloride waste with oil shale ash to capture chloride
386.
Thermal properties of calcium-aluminate based materials
387.
Thermal properties of modified polyethylene
388.
Thermal reactions in synthetic apatite-ammonium sulfate mixture
389.
Thermal residual stresses in chromium carbide based cermets
390.
Thermal shock behaviour of cermets
391.
Thermal shock resistance of chromium carbide-based cermets
392.
Thermal shocks and fatigue life of helically coiled once-through steam generator tubes in transition boiling zone
393.
Thermal spray coatings from WC-Co powders produced by mechanically activated synthesis [Electronic resource]
394.
Thermal spray processes in Estonia industry
395.
Thermal stability of LED lamps
396.
Thermal stability of synthesized carbonate apatites
397.
Thermal swelling behavior during pyrolysis of estonian oil shale kukersite
398.
Thermal transformations in systems based on natural apatites
399.
Thermal transport and thermoelectric effect in composites of alumina and graphene-augmented alumina nanofibers
400.
Thermal, Mechanical, and Acoustic Properties of Polydimethylsiloxane Filled with Hollow Glass Microspheres
401.
Thermochromatographical analysis of polymer thermal decomposition: interpretation and classification by principal component analysis and related methods
402.
Thermomechanical effects on the wear behavior of cermets : thermal transition
403.
Thermophysical properties and thermal shock resistance of chromium carbide based cermets
404.
Thermo-physical properties and thermal shock resistance of chromium carbide based cermets
405.
Titanium(IV) acetylacetonate xerogels for processing titania films : structure and thermal analysis [Electronic resource]
406.
Transformation and distribution of sulphur compounds at the thermal processing of oil shale in solid heat carrier unit
407.
Use of a dry SO2-removal method at thermal power plants
408.
Using common household thermal storages to support the PV- and battery system in nearly zero energy buildings in off-grid mode
409.
Utilization of additive manufacturing in the thermal design of electrical machines : a review
410.
Utilization of high calcium oxide and alkali metal content fuel at the thermal power plants
411.
Utilization of high calcium oxide and alkali metal contentfuel at the thermal power plants
412.
Validation of a simulation model for hygrothermal performance of log wall with internal thermal insulation in cold climate
413.
Validation of a transient zonal model to predict the detailed indoor thermal environment : Case of electric radiators and wood stoves
414.
Water quenching and formation of thermal fatigue cracks on tube surface
415.
Wear resistance of high velocity thermal sprayed coatings
416.
Wear resistance of laser cladded thermal sprayed coatings
417.
Wear resistance of thermal sprayed coatings
418.
Wear resistance of thermal sprayed coatings on the base of recycled hardmetal
419.
Wear resistance of thermal sprayed hardmetal coatings
420.
Wear resistant thermal sprayed coatings on the base of recycled hardmetal powder
421.
Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powders
422.
Wear-resistant thermal sprayed coatings on the base of recycled hardmetal
423.
Vector optimization of thermal power plants
424.
Wind-driven stratification patterns and dissolved oxygen depletion off the Changjiang (Yangtze) Estuary
425.
Winter re-stratification events and their consequences in the NE Baltic Sea
426.
Värmeledningstal hos olika jordarter = Thermal conductivity of soils
427.
Yields and properties of thermal bitumen obtained from combustible shale
428.
YSZ-rGO composite ceramics by spark plasma sintering : the relation between thermal evolution of conductivity, microstructure and phase stability
võtmesõna
103
1.
thermal stratification
2.
analytical thermal model approach
3.
building thermal performance
4.
combined thermal bridge
5.
coral thermal stress
6.
differential thermal analysis (DTA)
7.
electrical and thermal loads
8.
electron microscopeGrain sizeHolocene Thermal MaximumBaltic SeaGulf of Riga
9.
electronic pacaging thermal management
10.
External Thermal Insulation Composite System
11.
External Thermal Insulation Composite System (ETICS)
12.
external thermal insulation composite system ETICS
13.
External Thermal Insulation Composite Systems
14.
high-temperature differential thermal analysis (HDTA)
15.
holocene thermal maximum
16.
indoor thermal conditions
17.
interior thermal insulation
18.
linear thermal transmittance
19.
lumped parameter thermal network
20.
lumped-parameter thermal network
21.
mechanical and thermal effects
22.
mechanically activated thermal synthesis
23.
non-thermal
24.
non-thermal - radio continuum
25.
non-thermal plasma
26.
orthotropic thermal conductivity
27.
outdoor thermal and wind comfort
28.
outdoor thermal comfort optimization
29.
seasonal thermal storage
30.
Simultaneous thermogravimetry (TG) and differential thermal analysis (DTA)
31.
smart thermal grids
32.
solar thermal
33.
stratification
34.
stratification efficiency
35.
structural thermal mass activation
36.
summer thermal comfort
37.
synchronous reluctance motors thermal analysis
38.
thermal comfort
39.
thermal analyses
40.
thermal analysis
41.
thermal analysis tool
42.
Thermal and wind comfort
43.
thermal annealing
44.
thermal behaviour
45.
thermal bridge
46.
thermal bridges
47.
thermal characteristics
48.
thermal comfort
49.
thermal conditions
50.
thermal conductance
51.
thermal conductivity
52.
thermal coupling
53.
thermal decomposition
54.
thermal degradation
55.
thermal denaturation
56.
thermal design
57.
thermal desorption spectroscopy
58.
thermal effects
59.
thermal energy
60.
thermal energy storage
61.
thermal energy storage (TES)
62.
thermal expansion
63.
thermal flexibility of residential buildings
64.
thermal fluctuations
65.
thermal hysteresis
66.
thermal inertia
67.
thermal insulation
68.
thermal load
69.
thermal management
70.
thermal management (packaging)
71.
thermal marks
72.
thermal mass
73.
thermal model
74.
thermal models
75.
thermal network
76.
thermal parameter
77.
thermal performance
78.
thermal plates
79.
thermal power plant
80.
thermal power plants
81.
thermal properties
82.
thermal residual stress
83.
thermal residual stresses
84.
thermal resistance
85.
thermal schok
86.
thermal sensors
87.
thermal shock
88.
thermal simulations
89.
thermal spray
90.
thermal spray coating
91.
thermal sprayed coatings
92.
thermal spraying
93.
thermal stability
94.
thermal storage
95.
thermal stress
96.
thermal swelling
97.
thermal zoning
98.
thermal tempering
99.
thermal tests
100.
Thermal treatment
101.
Thermal variables control
102.
vertical stratification
103.
Wind-photovoltaic-thermal-bundled power
allikas
53
1.
Abstracts of Symposium on Thermal Analysis, Sopron, Hungary
2.
An International Conference on Thermal Sensing and Imaging Diagnostic Applications, 22-25 April 1997, Orlando, Florida
3.
Applied thermal engineering
4.
Book of abstracts : 2nd Central and Eastern European Conference on Thermal Analysis and Calorimetry, 27-30 August 2013, Vilnius, Lithuania
5.
Book of abstracts : MEDICTA 2007 : the 8th Mediterranean Conference on Calorimetry and Thermal Analysis : September 25th - September 29th, 2007, Palermo, Italy
6.
Buildings XIV : thermal performance of exterior envelopes of whole buildings : [conference proceedings]
7.
Case studies in thermal engineering
8.
Chemical Thermodynamics and Thermal Analysis
9.
Encyclopedia of thermal stresses
10.
ESTAC 8 : 8th European Symposium on Thermal Analysis and Calorimetry, Barcelona, Spain, August 25-29, 2002 : abstracts book
11.
ESTAC 9 : 9th European Symposium on Thermal Analysis and Calorimetry : 27-31 August 2006, Krakow, Poland : [book of abstracts]
12.
ESTAC10 : 10th European Symposium on Thermal Analysis and Calorimetry : August 22-27, 2010, Rotterdam, The Netherland : abstract book
13.
ESTAC-11 : the 11th European Symposium on Thermal Analysis and Calorimetry : Dipoli Congress Center, Espoo, Finland, August 17-21, 2014 : abstracts
14.
ESTAC-7 : 7th European Symposium on Thermal Analysis and Calorimetry, Aug. 30 - Sept. 4, 1998, Balatonfüred, Hungary : book of abstracts
15.
Experimental thermal and fluid science
16.
Fourth European symposium on thermal analysis and calorimetry, Aug. 23-28, 1987. Workbook. Supplement
17.
ICTAC 13 : 13th International Congress on Thermal Analysis and Calorimetry : XXVI Conference AICAT-GICAT : Chia Laguna, September 12-19, 2004 : book of abstracts
18.
ICTAC 15 - 15th International Congress on Thermal Analysis and Calorimetry : August 20-24, 2012, Osaka
19.
IUTAM Symposium 12–3=GA.10-08 "Waves in fluids : Effects of Non-Linearity, Rotation, Stratification and Dissipation" Moscow, June 18-22, 2012 programme
20.
Journal for Thermal Envelope & Building Science
21.
Journal of thermal analysis
22.
Journal of thermal analysis : an international forum for communications on thermal investigations
23.
Journal of thermal analysis and calorimetry
24.
Journal of thermal spray technology
25.
Journal of thermal stresses
26.
JTACC+V4 : 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 (Joint Czech-Hungarian-Polish-Slovakian) Themoanalytical Conference: Budapest Hungary, June 6-9, 2017 : Book of Abstracts
27.
JTACC+V4 : 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference : June 6–9, 2017, Budapest, Hungary : Book of Abstracts
28.
MEDICTA 2005 : 7th Mediterranean Conference on Calorimetry and Thermal Analysis : 2-6 July 2005, Thessaloniki, Greece : book of abstracts
29.
MEDICTA 2005 : 7th Mediterranean Conference on Calorimetry and Thermal Analysis : 2-6 July 2005, Thessaloniki, Greece : proceedings
30.
MEDICTA 2009 : 9th Mediterranean Conference on Calorimetry and Thermal Analysis : June 15-18, 2009, Marseille, France : book of abstracts
31.
Proceedings of the 35th North American Thermal Analysis Society Conference : East Lansing, Michigan (USA), 26-29.08.2007
32.
Proceedings of the 5th NEXUSPAN Workshop on Thermal Aspects in Microsystem Technology, 6-8 May 1998, Budapest, Hungary
33.
Proceedings of the 8th International Congress on Thermal Stresses, 1-4 June 2009 : Thermal Stresses 2009 : Abstract book vol. 2
34.
Programme and abstract book of 12th International Congress on Thermal Analysis and Calorimetry : August 14-18, 2000, Copenhagen, Denmark
35.
Success & visions for bioenergy. Thermal processing of biomass for bioenergy, biofuels and bioproducts
36.
Thermal engineering
37.
Thermal Science and Engineering Progress
38.
Thermal Spray 2003 : proceedings of the International Thermal Spray Conference : [Orlando, Florida, 5-8 May 2003]
39.
Thermal spray 2006 : building on 100 years of success : proceedings of the 2006 International Thermal Spray Conference : May 15-18, 2006, Seattle, Washington, USA
40.
XXVIII National Conference on Calorimetry, Thermal Analysis and Chemical Thermodynamics : Milan, Italy, December 11-15, 2006
41.
11th Mediterranean Conference of Calorimetry and Thermal Analysis (MEDICTA 2013) : Athens, Greece, 12–15 June, 2013
42.
12th Conference on Calorimetry and Thermal Analysis of Polish Society of Calorimetry and Thermal Analysis and 5th Joint Czech-Hungarian-Polish-Slovakian Thermoanalytical Conference : Book of Abstracts
43.
12th European Symposium on Thermal Analysis and Calorimetry ESTAC 12 : 27-30 August 2018, Brasov, Romania : book of abstracts
44.
14th International Congress on Thermal Analysis and Calorimetry . VI Brazilian Congress on Thermal Analysis and Calorimetry : September 14-18, 2008, Sao Pedro, Brazil
45.
14th Nordic Symposium on Thermal Analysis and Calorimetry, Oslo, 15-17 June 1994 : [abstracts]
46.
15th Nordic symposium for thermal analysis and calorimetry : programme, extended abstracts
47.
15th Nordic Symposium for Thermal Analysis and Calorimetry, Helsinki, Finland, Nov. 13-15, 1996 : programme, extended abstracts
48.
1st Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC1), 7-10 September 2011, Craiova, Romania : book of abstracts
49.
2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC)
50.
2nd Journal of Thermal Analysis and Calorimetry Conference, Budapest, June 18–21, 2019 : book of abstracts
51.
3rd Central and Estern European Conference on Thermal Analysis and Calorimetry, 25-28 August 2015, Ljubljana, Slovenia : book of abstracts
52.
5th Central and Eastern European Conference on Thermal Analysis and Calorimetry & 14th Mediterranean Conference on Calorimetry and Thermal Analysis , 27-30 August 2019, Roma, Italy: CEEC-TAC5 & Medicta2019 : book of abst
53.
6th Mediterranean Conference on Calorimetry and Thermal Analysis : MEDICTA 2003 : 27-30 July 2003, Portugal : book of abstracts
kirjastus/väljaandja
5
1.
Central and Eastern European Committee for Thermal Analysis and Calorimetry
2.
Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC)
3.
Central and Estern European Committee for Thermal Analysis and Calorimetry
4.
Hellenic Society for Thermal Analysis
5.
Nordic Society for Thermal Analysis and Calorimetry
seeria-sari
1
1.
Thermal Stresses 2009 : Abstract book ; vol 2