Otsing - TalTech teadusportaal

kuva

reasta

1

artikkel kogumikus

Abrasion of WC based hardmetalsVoltšihhin, Nikolai; Hussainova, Irina; Antonov, MaksimECOTRIB 2011 : 3rd European Conference on Tribology and 4th Vienna International Conference on Nano-Technology : June 7-9, 2011, Vienna, Austria. 12011 / p. 229-232

artikkel kogumikus

2

artikkel ajakirjas EST / artikkel ajakirjas ENG

Abrasive-erosive wear of thermally sprayed coatings from experimental and commercial Cr3C2-based powdersSarjas, Heikki; Surženkov, Andrei; Juhani, Kristjan; Antonov, Maksim; Adoberg, Eron; Kulu, Priit; Viljus, Mart; Traksmaa, Rainer; Matikainen, Ville; Vuoristo, PetriJournal of thermal spray technology2017 / p. 2020-2029 : ill https://doi.org/10.1007/s11666-017-0638-2 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

3

artikkel ajakirjas EST / artikkel ajakirjas ENG

Adaptation of Laboratory tests for the assessment of wear resistance of drill-bit inserts for rotary-percussive drilling of hard rocksSaai, Afaf; Bjorge, Ruben; Dahl, Filip; Antonov, MaksimWear2020 / art. 203366, 10 p. : ill https://doi.org/10.1016/j.wear.2020.203366 Journal metrics at Scopus Article at Scopus Journal metrics ast WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

4

artikkel ajakirjas

Adhesion of AlCrN coating deposited on TiB2/Ti composites sinteredby SPS dedicated for high temperature tribological applicationsMichalczewski, Remigiusz; Kalbarczyk, M.; Slomka, Z.; Hussainova, Irina; Liu, Le; Antonov, MaksimIOP conference series : materials science and engineering2021 / art. 012010, 9 p https://doi.org/10.1088/1757-899X/1140/1/012010

artikkel ajakirjas

5

artikkel kogumikus

Advanced cermets as tribomaterialsHussainova, Irina; Antonov, Maksim; Kübarsepp, JakobProceedings of the 5th World Tribology Congress : WTC13 : September 8-13, 2013, Torino, Italy2013

artikkel kogumikus

6

artikkel kogumikus

Advanced multifunctional materials and their applicationsAntonov, Maksim; Hussainova, Irina; Kers, Jaan; Kulu, Priit; Kübarsepp, Jakob; Veinthal, RennoResearch in Estonia : present and future2011 / p. 146-167

artikkel kogumikus

7

artikkel kogumikus

Analysis of microstructure and abrasive wear of Fe-based hardfacings with TiC, in-situ synthesized from TiO2Yöyler, Sibel; Surzhenkov, Andrei; Antonov, Maksim; Viljus, Mart; Traksmaa, Rainer; Juhani, KristjanEuro PM2023 : proceedings2023 / art. 195090 https://doi.org/10.59499/EP235762969

artikkel kogumikus

8

artikkel ajakirjas

Analysis of the reciprocal wear testing of Aluminum AA1050 processed by a novel mechanical nanostructuring techniqueOmranpour Shahreza, Babak; Kommel, Lembit; Sergejev, Fjodor; Ivanisenko, Yulia; Antonov, MaksimIOP conference series : materials science and engineering2021 / art. 012051, 6 p. : ill https://doi.org/10.1088/1757-899X/1140/1/012051

artikkel ajakirjas

9

artikkel kogumikus

Applications of recycled hardmetal powderZimakov, Sergei; Pihl, Toomas; Kulu, Priit; Antonov, Maksim; Mikli, ValdekEngineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts2003 / p. 43-44

artikkel kogumikus

10

artikkel ajakirjas

Applications of recycled hardmetal powderZimakov, Sergei; Pihl, Toomas; Kulu, Priit; Antonov, Maksim; Mikli, ValdekProceedings of the Estonian Academy of Sciences. Engineering2003 / 4, p. 304-316 : ill

artikkel ajakirjas

11

artikkel ajakirjas EST / artikkel ajakirjas ENG

Assessment of 3D printed steels and composites intended for wear applications in abrasive, dry or slurry erosive conditionsKumar, Rahul, 1993-; Antonov, Maksim; Beste, U.; Goljandin, DmitriInternational journal of refractory metals and hard materials2020 / art. 105126, 9 p. : ill https://doi.org/10.1016/j.ijrmhm.2019.105126 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

12

artikkel ajakirjas EST / artikkel ajakirjas ENG

Assessment of abrasive powder behaviour during impact-abrasive wear of PCD elementsGomon, Dmitri; Auriemma, Fabio; Antonov, MaksimWear2019 / p. 151-161 : ill https://doi.org/10.1016/j.wear.2019.03.024 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

13

dissertatsioon

Assessment of cermets performance in aggressive mediaAntonov, Maksim2006 http://www.ester.ee/record=b2208731*est

dissertatsioon

14

artikkel ajakirjas

Assessment of cermets performance in erosive mediaHussainova, Irina; Antonov, MaksimInternational journal of materials & product technology2007 / 3/4, p. 361-376 : ill https://www.inderscience.com/info/inarticle.php?artid=13085

artikkel ajakirjas

15

artikkel ajakirjas

Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditionsAntonov, Maksim; Hussainova, Irina; Sergejev, Fjodor; Kulu, Priit; Gregor, AndreWear2009 / p. 898-906 : ill

artikkel ajakirjas

16

artikkel ajakirjas

Assessment of mechanically mixed layer developed during high temperature erosion of cermetsAntonov, Maksim; Hussainova, Irina; Pirso, Jüri; Volobujeva, OlgaWear2007 / 2, p. 878-886 : ill

artikkel ajakirjas

17

artikkel ajakirjas

Assessment of zirconia doped hardmetals as tribomaterialsHussainova, Irina; Antonov, Maksim; Voltšihhin, NikolaiWear2011 / p. 1909-1915 : ill

artikkel ajakirjas

18

artikkel kogumikus

Assessment of the potential of lubricated contact condition laboratory testing and surface analysis for improving the performance of machine elements. Comparison of model and real component test methodsAntonov, Maksim; Michalczewski, Remigiusz; Pasaribu, Richard; Piekoszewski, Witold18th International Baltic Conference : Engineering Materials & Tribology : BALTMATTRIB-2009 : October 22-23, 2009, Tallinn, Estonia : abstracts2009 / p. 55

artikkel kogumikus

19

artikkel ajakirjas

Assessment of the reliability of hardfacings for soil rippersJankauskas, Vytenis; Katinas, Egidijus; Varnauskas, Valentinas; Katinas, A.; Antonov, MaksimJournal of friction and wear2015 / p. 89-95 : ill http://dx.doi.org/10.3103/S106836661501016X

artikkel ajakirjas

20

artikkel ajakirjas

Axial and torsional buckling analysis of single- and multi-walled carbon nanotubes : finite element comparison between armchair and zigzag typesRahmani Ahranjani, Ramin; Antonov, MaksimSN Applied Sciences2019 / art. 1134, 13 p. : ill https://doi.org/10.1007/s42452-019-1190-0

artikkel ajakirjas

21

artikkel ajakirjas EST / artikkel ajakirjas ENG

Behaviour of tungsten alloy with iron and nickel under repeated high temperature plasma pulsesLaas, T.; Laas, K.; Paju, J.; Priimets, Jaanis; Tõkke, Siim; Väli, B.; Shirokova, Veroonika; Antonov, Maksim; Gribkov, V.A.; Demina, E.V.; Pimenov, V.N.; Paduch, M.; Matulka, R.; Akel, M.Fusion engineering and design2020 / art. 111408 https://doi.org/10.1016/j.fusengdes.2019.111408 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

22

artikkel ajakirjas EST / artikkel ajakirjas ENG

Cavitation resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF coatingsKorobov, Yuri; Alwan, H.; Soboleva, Natalia; Antonov, MaksimJournal of Thermal Spray Technology2022 / p. 234–246 https://doi.org/10.1007/s11666-021-01242-7 Journal metrics at Scopus Article at Scopus Journal metrics at WOS Article at WOS

artikkel ajakirjas EST / artikkel ajakirjas ENG

23

artikkel ajakirjas

Cermets surface transformation under erosive and abrasive wearAntonov, Maksim; Hussainova, IrinaTribology international2010 / p. 1566-1575 : ill

artikkel ajakirjas

24

artikkel ajakirjas

Characterization of microstructure and mechanical properties of cermets at micro- and nanoscalesHussainova, Irina; Antonov, Maksim; Jasiuk, Iwona; Du, XiangdongInternational journal of materials & product technology2011 / p. 58-74 : ill

artikkel ajakirjas

25

artikkel kogumikus

Chromium carbide based cermets as the wear resistant materialsAntonov, Maksim; Hussainova, Irina; Pirso, JüriProceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia2004 / p. 177-180 : ill

artikkel kogumikus

Antonov, Maksim (autor)

teaviku laadid

autor 15

CV 11

tema kohta 7