Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
carbon steel (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
3
Vaata veel..
(5/411)
Ekspordi
ekspordi kõik päringu tulemused
(3)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel kogumikus
Eddy current corrosion measurement of steel
Märtens, Olev
;
Land, Raul
;
Min, Mart
;
Rist, Marek
;
Ferenets, Marju
;
Käsper, Andres
International Workshop on Impedance Spectroscopy : IWIS 2016 : September 26-28, 2016, Technische Universität Chemnitz, Germany : abstract book
2016
/
p. 40-41 : ill
artikkel kogumikus
2
artikkel kogumikus
Eddy current corrosion measurement of steel
Märtens, Olev
;
Land, Raul
;
Min, Mart
;
Rist, Marek
;
Ferenets, Marju
;
Käsper, Andres
Impedance spectroscopy : advanced applications : battery research, bioimpedance, system design
2018
/
p. 125–134 : ill
https://doi.org/10.1515/9783110558920-012
artikkel kogumikus
3
artikkel ajakirjas
Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substrates
Surženkov, Andrei
;
Viljus, Mart
;
Antonov, Maksim
;
Kübarsepp, Jakob
;
Juhani, Kristjan
;
Kulu, Priit
;
Vägiström, Heinar
;
Jankauskas, Vytenis
;
Leišys, Rimtautas
;
Bendikiene, Regita
;
Adoberg, Eron
;
Peetsalu, Priidu
;
Mere, Arvo
;
Gregor, Andre
Surface and coatings technology
2022
/
art. 128771
https://doi.org/10.1016/j.surfcoat.2022.128771
artikkel ajakirjas
Kirjeid leitud 3, kuvan
1 - 3
pealkiri
290
1.
Corrosive effects of H2S and NH3 on natural gas piping systems manufactured of carbon steel
2.
Effect of WC grain size and content on erosive wear of manual arc welded hardfacings with low-carbon ferritic-pearlitic steel or stainless steel matrix
3.
Effect of laser heat treatment on AlxTi1-xN-based PVD coatings, deposited on carbon and tool steel substrates
4.
Effect of WC grain size and content on low stress abrasive wear of manual arc welded hardfacings with low-carbon or stainless steel matrix
5.
Carbonation of steel slag and gypsum for building materials and associated reaction mechanisms
6.
Mechanical activation of medium basicity steel slag under dry condition for carbonation curing
7.
Laser treatment of PVD coated carbon steels and powder steels
8.
Properties of steel powder prepared from bearing steel turnings
9.
Development of novel hierarchically microporous-mesoporous carbon and carbon nanospheres based materials and PEMFC single cells
10.
Effects of Carbon tax on urban Carbon Emission reduction : evidence in China environmental governance
11.
Investigations on new carbon-based nanohybrids combining carbon nanotubes and metal oxide nanoparticles
12.
Investigations on new carbon-based nanohybrids combining carbon nanotubes, HfO2 and ZnO nanoparticles
13.
Ionic liquid-carbon-polymer composite actuator based on carbon aerogel electrodes
14.
Removal of heavy metals and total organic carbon from wastewater using powdered activated carbon
15.
A comparative study of the design basis of the Russian Steel Structures Code and Eurocode 3
16.
A study of the electrochemical synthesis of polypyrrole from aqueous solution on stainless steel electrode
17.
Additive manufacturing of CoCrFeMnNi high-entropy alloy/AISI 316L stainless steel bimetallic structures
18.
Additive manufacturing of TiC-based cermet with stainless steel as a binder material
19.
Advances in steel structures in Finland
20.
Alternative approach to buckling of square hollow section steel columns in fire
21.
Aluminium - stainless steel hybrid composites obtained by selective laser melting and centrifugal casting [Online resource]
22.
An orthotropic material model for steel fibre reinforced concrete based on the orientation distribution of fibres
23.
An XPS and AFM study of polypyrrole coating on mild steel
24.
Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography
25.
Analytical model for magnetic anisotropy of non-oriented steel sheets
26.
Anisotropic and strain-dependent model of magnetostriction in electrical steel sheets
27.
Application of magnetic methods for structure investigation of steel-bonded hardmetals
28.
Assessment of remaining life of superheater austenitic steel tubes in oil shale PF boilers
29.
Behaviour of glulam-steel roof structures for sporthall
30.
Brazing of cermets with steel using amorphous filler metals
31.
Brazing of TiC cermet to steel
32.
Calculation of losses in electrical sheet steel by superposition of alternating and constant magnetic fields
33.
Characteristics of steel-bonded cermets and their application
34.
Characterization of serviceability of steel-bonded hardmetals
35.
Classification of cross sections for steel beams in different design codes
36.
Comparative study of the buckling of steel beams in Eurocode 3 and the Russian code
37.
Comparative study of the PVD coatings on the plasma nitrided steel
38.
Computationally efficient method for steel column buckling in fire
39.
Computer based steel microstructure analysis describing the size and distribution of structure phases
40.
Conducting polypyrrole coating of steel in aqueous solutions
41.
Corrosion behavior of polypyrrole coated mild steel
42.
Corrosion protective properties of polypyrrole films on mild steel
43.
Corrosion resistance of the stainless steel substrate coated by PVD
44.
Decarburisation effect on hardened strip steel fastening components
45.
Decarburization effect on hardened strip steel fastening components
46.
Design of glulam arched roof structures with steel joints
47.
Design optimization of steel and glass structures = Metall- ja klaaskonstruktsioonide optimeerimine
48.
Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
49.
Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools
50.
Dual compounds "cemented carbide+steel" produced by diffusion bonding
51.
Duplex TiN coating on stainless steel : an electrochemical and surface analysis study : doctoral thesis
52.
Duplex TiN coatings deposited by arc plating for increased corrosion resistance of stainless steel substrates
53.
Duplex titanium nitride coatings for corrosion prevention of stainless steel substrate
54.
Duplex treatment of steel surface = Terase pinna duplekstöötlus
55.
Early experimental investigations on slotted-in steel plate connections with self-perforating dowels in CLT
56.
Eddy current corrosion measurement of steel
57.
Effect of alloying additives on impact-abrasive wear of manual arc welded hadfield steel hardfacings
58.
Effect of mechanical stress on excess loss of electrical steel sheets
59.
Effect of multi-axial stress on iron losses of electrical steel sheet
60.
Effect of temperature and load on three-body abrasion of cermets and steel
61.
Efficiency of steel in suspended structures
62.
Electrical resistivity of additively manufactured silicon steel for electrical machine fabrication
63.
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
64.
Enhanced passivity of austenitic AISI 304 stainless steel by low-temperature ion nitriding
65.
Enhancing of corrosion resistance of steel-bonded hardmetals in acid conditions
66.
Ensuring the strength of tall vertical cylindrical steel vessels during erection
67.
Erosion-oxidation of pressure vessel steel P265GH
68.
Evolution of TiN coating surface roughness during physical vapor deposition on high speed steel substrate
69.
Experience in design, exploitation and examination of great steel tanks
70.
Ferritic chromium steel as binder metal for WC cemented carbides
71.
Grain size-dependent mechanical and wear properties of TiC-FeNi steel cermets
72.
High strength steel behaviour during hot dip galvanizing
73.
High temperature corrosion of martensite steel under influence of chlorine
74.
Hysteresis measurements and numerical losses segregation of additively manufactured silicon steel for 3D printing electrical machines
75.
Induction brazing of cermets to steel
76.
Induction brazing of cermets to steel and eddy current testing of joint quality
77.
Induction brazing of tungsten free hardmetals to steel
78.
Influence of residual stress on the stability of steel columns at elevated temperatures
79.
Influence of sintering techniques on the performance characteristics of steel-bonded TiC-based cermets
80.
Influence of steel austenitization to part quality in continuous austempering
81.
Innovative steel bridges in Estonia
82.
Iron losses evaluation of additively manufactured 6.5 % silicon steel
83.
Iron losses, magnetoelasticity and magnetostriction in ferromagnetic steel laminations
84.
Joining hardmetals to steel using brazing processes
85.
Joining of CrNi steel and AlMg alloy without interlayers
86.
Laboratory tests and modelling of mineral wool insulated steel sandwich panels
87.
Loss model for the effects of steel cutting in electrical machines
88.
Magneto-mechanical modeling of electrical steel sheets
89.
Measures for noise reduction on steel railway bridges
90.
Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L
91.
Metallic flanges. Part 1, Steel flanges
92.
Methods for fibre orientation analysis of X-ray tomography images of steel fibre reinforced concrete (SFRC)
93.
Methods of improving of carbide steel properties
94.
Microstructure and wear resistance of the laser hardened PM tool steel Vanadis 6
95.
Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder
96.
Mild steel tribology for circular economy of textile industries
97.
Model for stress-dependent hysteresis in electrical steel sheets including orthotropic anisotropy
98.
Model of magnetic anisotropy of non-oriented steel sheets for finite-element method
99.
Modeling of microstructures and analysis of abrasive wear of arc-welded hadfield steel
100.
Modeling the Effect of Multiaxial Stress on Magnetic Hysteresis of Electrical Steel Sheets : A Comparison
101.
Modelling anisotropy in non-oriented electrical steel sheet using vector Jiles-Atherton model
102.
Moisture drying capacity of mineral wool insulated steel-faced sandwich panels by convection
103.
Moisture dry-out capability of steel-faced mineral wool insulated sandwich panels
104.
Moisture dry-out from steel faced insulated sandwich panels
105.
Passivation and anodic oxidation of duplex TiN coatings on stainless steel
106.
Passivity of TiN layer: role in corrosion prevention of coated steel substrate
107.
Predictive tools for the isothermal hardening of strip steel parts in molten salt
108.
Reliability of dual compounds “carbide composite+steel” produced by diffusion welding
109.
Role of alloying elements for improved corrosion resistance of Zn-Al-Mg coatings on steel
110.
Rotational single sheet tester for multiaxial magneto-mechanical effects in steel sheets
111.
Screen elements made of perforated steel tape and their application for shielding electromagnetic fields
112.
Selective laser melting of 316L stainless steel : Influence of TiB2 addition on microstructure and mechanical properties
113.
Serviceability characteristics of steel-bonded hardmetals and their structure sensitivity
114.
Simulation of the hot deformation and fracture behavior of reduced activation ferritic/martensitic 13CrMoNbV steel
115.
Sliding wear of composite stainless steel hardfacing under room and elevated temperature
116.
Slotted-in steel plate connections with self-perforating dowels in CLT
117.
Slurry erosion testing of steel with oil shale ash as abrasive
118.
Steel selection considerations for hot-dip galvanizing = Terase valiku mõjurid kuumtsinkimiseks
119.
Steel structures in Estonia - investigation, design and realization
120.
Steel-bonded hardmetals
121.
Stress-strain relations for steel fiber reinforced concrete based on the orientation tensor of the fibers
122.
Structural steel design of a large-span hall building in Estonia
123.
Testing hardened steel targets for dynamic hardness
124.
Texture dependent strain hardening in additively manufactured stainless steel 316L
125.
The first European Community, the European Steel and Coal Community
126.
The influence of elastic boundary conditions on the stability of steel frames
127.
The wear mechanism in heavy-loaded lubricated coated/steel sliding contacts
128.
TiC-base cermet steel dual compounds produced by diffusion bonding
129.
Time-efficient automated analysis for fibre orientations in steel fibre reinforced concrete
130.
Transformation of natural and synthetic dyes in pulsed electric discharge in the granular steel bed
131.
Utilization of high speed steel grinding waste for cutting tools production
132.
Wear and friction in boron carbide cermet-steel sliding system
133.
Wear and friction in boron carbide cermet-steel sliding system [Electronic resource]
134.
Wear resistance assessment of steel-bonded hard metals
135.
Carbon dioxide binding in the heterogeneous systems formed by combustion of oil shale. 1, Carbon dioxide binding at oil shale ash deposits
136.
Comparison of carbon aerogel and carbide-derived carbon as electrode materials for non-aqueous supercapacitors with high performance
137.
Investigation of cost-effective carbon nanofiber/carbon fiber and silicone polymer composite material for wearable bioimpedance device
138.
Production of superhard carbon rich boron carbon (B<sub>11.72</sub>C<sub>3.28</sub>) based composite in the B<sub>4</sub>C-Al-WC-Co-Cu system through SHS and SPS techniques [Electronic resource]
139.
Transition-metal- and nitrogen-doped carbide-derived carbon/carbon nanotube composites as cathode catalysts for anion-exchange membrane fuel cells
140.
A methodology for modelling traffic related carbon monoxide emissions in suburban areas
141.
A review of the synthesis and photoluminescence properties of hybrid ZnO and carbon nanomaterials
142.
A technical analysis of oil shale firing power units retrofitting for carbon capture and storage (CCS)
143.
Adhesion of single-walled carbon nanotube thin films with different materials
144.
Adsorption of 2,4-xylidine on granulated activated carbon in a packed bed absorber [Electronic resource]
145.
Analysing carbon based hybrid nanocomposites displaying interfacial phenomena with scanning transmission electron microscopy and related techniques
146.
Applicability of static supercritical carbon dioxide extraction in biogeochemical characterization of oil shales
147.
Application of carbon isotopes to the study of the Ordovician and Silurian of the Baltic
148.
Atomic layer deposition of high-k dielectrics on carbon nanoparticles
149.
Bidding strategy of a microgrid considering risk interdependence between electricity and carbon markets
150.
Carbon accumulation rate in a raised bog in Latvia, NE Europe, in relation to climate warming
151.
Carbon aerogel based electrode material for EAP actuators
152.
Carbon aerogel platinum-praseodymium oxide nanocatalyst for methanol oxidation in 0.5 M sulfuric acid : (digital presentation)
153.
Carbon aerogel-based solid-phase microextraction coating for the analysis of organophosphorus pesticides
154.
Carbon aerogel-cellulose films and fibres with electrical conductivity and antibacterial properties against cyanobacteria
155.
Carbon aerogels as supporting materials in heterogeneous catalysis
156.
Carbon aerogels from 5-methylresorcinol-formaldehyde gels = Süsinikaerogeelid 5-metüülresortsinoolist ja formaldehüüdist
157.
Carbon capture and storage : cost analysis of electricity production for Latvia
158.
Carbon dioxide binding by oil shale ash at field conditions
159.
Carbon dioxide binding in the aqueous suspensions of oil shale ash
160.
Carbon dioxide levels in educational institutions
161.
Carbon dioxide long-term emissions and its storage options in the Baltic Region
162.
Carbon dioxide sequestration in power plant Ca-rich ash waste deposits
163.
Carbon isotopic composition and biological marker distribution in oils and rocks of the Baltic region
164.
Carbon materials obtained from self-binding sugar cane bagasse and deciduous wood residues plastics
165.
Carbon monoxide concentrations evaluated by traffic noise data in two towns
166.
Carbon neutral Baltic Sea Region by 2050
167.
Carbon neutral Baltic Sea region by 2050 : myth or reality?
168.
Carbon prices for meeting the Paris agreement and their impact on key metals
169.
Carbon xerogel from 5-methylresorcinol-formaldehyde gel : the controllability of structural properties
170.
13C NMR study of resorcinol-formaldehyde resins
171.
Characteristics of activated carbon produced from biosludge and its use in wastewater post-treatment
172.
Chemical vapour deposition growth of graphene and carbon nanotubes on alumina
173.
Climate and carbon neutrality in a consumptionist world
174.
CO2 turned into a nitrogen doped carbon catalyst for fuel cells and metal-air battery applications
175.
Cobalt-containing nitrogen-doped carbon aerogels as efficient electrocatalysts for the oxygen reduction reaction
176.
Composition of polycyclic hydrocarbons in the supercritical carbon dioxide extracts of oil shales
177.
Conjoined structures of carbon nanotubes and graphene nanoribbons
178.
Conodont biostratigraphy and carbon isotope stratigraphy of the Middle Ordovician (Darriwilian) Komstad Limestone, southern Sweden
179.
Construction of de novo all-carbon quaternary stereocenters in unbiased acyclic systems
180.
Covalent coupling of ionic liquid to carbon nanotubes : preparation and tribological properties
181.
Diamond-like carbon coatings on NdFeB magnets
182.
(Digital presentation) carbon aerogel platinum-praseodymium oxide nanocatalyst for methanol oxidation in 0.5 m sulfuric acid
183.
Directly electrospun electrodes for electrical double-layer capacitors from carbide-derived carbon
184.
Do contemporary (1980-2015) emissions determine the elemental carbon deposition trend at Holtedahlfonna glacier, Svalbard?
185.
Economics of carbon abatement in power sector with CO2 price floor [Electronic resource]
186.
Effect of carbon content on sinterability and properties of ZrO2 doped WC-cermets
187.
Effect of free carbon on the mechanical and tribological properties of cemented carbides
188.
Electroactive polymer actuators with carbon aerogel electrodes
189.
Electrocatalysis of oxygen reduction by iron-containing nitrogen-doped carbon aerogels in alkaline solution
190.
Electrochemically driven carbon-based materials as EAPs : fundamentals and device configurations [Online resource]
191.
Electroreduction of oxygen on carbide-derived carbon supported Pd catalysts
192.
Electroreduction of oxygen on cobalt- and iron-containing nitrogen-doped carbon aerogels
193.
Electrospinning of a polymer membrane reinforced with carbon nanotubes = Süsinik nanotorudega tugevdatud polümeerse membraani elektroketrus
194.
Elemental and water-insoluble organic carbon in Svalbard snow : a synthesis of observations during 2007–2018
195.
Elemental and water-insoluble organic carbon in Svalbard snow: a synthesis of observations during 2007–2018
196.
Embedded electronics influence on the strength of carbon fiber laminate
197.
Energy management for an integrated energy system with data centers considering carbon trading
198.
Estimation of carbon emission factors for the Estonian shale oil industry
199.
Extraction of oil shale with supercritical carbon dioxide
200.
Extraction of polyphenols from plants with modified supercritical carbon dioxide
201.
Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
202.
Gas-phase dechlorination of carbon tetrachloride over zero valent iron under mild process conditions
203.
Gas-phase decomposition of carbon tetrachloride over zero valent iron
204.
Gas-phase destruction of carbon tetrachloride over iron with mild process conditions
205.
Gas-phase destruction of carbon tetrachloride over ironcontaining materials under mild process conditions
206.
Gas-phase destruction of carbon tetrachloride over iron-containing materials under mild process conditions
207.
Geochemical study of stable carbon and oxygen isotopes in landfilled Ca-rich oil shale ash
208.
Hardness of multi wall carbon nanotubes reinforced aluminium matrix
209.
Highly active wood-derived nitrogen-doped carbon catalyst for the oxygen reduction reaction
210.
Identification of active sites for oxygen reduction reaction on nitrogen- and sulfur-codoped carbon catalysts
211.
Industrial carbon dioxide emissions and potential geological sinks in the Baltic states
212.
Influence of activated carbon on ozonation of phenolic wastewater
213.
Influence of preparation process on morphology and conductivity of carbon black-based electrospun nanofibers
214.
Influence of surface morphology on the tribological behavior of diamond-like carbon coating
215.
Influence of the interface on the photoluminescence properties in ZnO carbon-based nanohybrids
216.
Inkjet-printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte
217.
Integrated graptolite-conodont biostratigraphy and organic carbon chemostratigraphy of the Llandovery of Kallholn quarry, Dalarna, Sweden
218.
Investigation of different carbon nanotube reinforcements for fabricating bulk AlMg5 matrix nanocomposites
219.
Investigation of different carbon nanotube reinforcements for fabricating bulk AlMg5 matrix nanocomposites [Online resource]
220.
Investigation of oxygen reduction on platinum nanoparticles deposited onto peat-derived carbon carrier
221.
Iron and cobalt containing electrospun carbon nanofibre-based cathode catalysts for anion exchange membrane fuel cell
222.
Kouvola Housing fair NZEB houses energy, cost and carbon analyses
223.
La Comunidad Europea del Carbón y del Acero
224.
Latest Ordovician (Katian-Hirnantian) carbon isotope chemostratigraphy of the Oslo-Asker region, Norway
225.
Lipase-catalysed enantioselective hydrolysis of bicyclo[3.2.0]heptanol esters in supercritical carbon dioxide
226.
Llandovery carbon isotope trend in Estonia - local versus global signatures and correlation
227.
Llandovery carbon isotope trend in Estonia revisited : local versus global signatures and correlation
228.
Long‐term effects of climate change on carbon flows through benthic secondary production in small lakes
229.
Länderbericht Estland : energy policy and tools for a low-carbon generation in Estonia
230.
Microprinted carbon aerogel electrodes for sensors and actuators
231.
Middle and Upper Ordovician carbon isotope stratigraphy in Baltoscandia: towards a regional chemostratigraphic standard
232.
Modeling of a carbon nanotube junction with ab-inito software VASP
233.
Modelling of a carbon capture and storage system for the Latvian electricity sector
234.
Multiscale study of carbon dioxide chemisorption in the plug flow adsorber of the anesthesia machine
235.
Multi-source remote sensing data reveals complex topsoil organic carbon dynamics in coastal wetlands
236.
Nanoporous carbon-based electrodes for high strain ionomeric bending actuators
237.
New carbon construction materials from self-binding biomass plastics
238.
New carbon-based catalyst synthesis from spent li-ion batteries for electrochemical oxygen reduction
239.
Numerical simulation of ultrasonic time reversal on defects in carbon fibre reinforced polymer
240.
On land-related carbon cycling monitoring and control in Estonia [Electronic resource]
241.
On management and optimization of the carbon balance of Estonia - long term prospectives
242.
Ordovician and lowermost Silurian carbon isotopes
243.
Organic and carbon aerogels containing rare-earth metals : their properties and application as catalysts
244.
Organic and carbon aerogels doped with lanthanides as catalyst for Michael reaction
245.
Ozonation for the chemical modification of carbon surfaces in fly ash
246.
Oxygen electroreduction on Fe-containing nitrogen-doped carbon nanotubes
247.
Oxygen electroreduction on Zinc and Dilithium phthalocyanine modified multiwalled carbon nanotubes in alkaline media
248.
Paired organic and carbonate carbon isotope records through the Middle and Upper Ordovician of Estonia
249.
Peat-derived carbon-based non-platinum group metal type catalyst for oxygen reduction and evolution reactions
250.
Photocurrent generation in carbon nanotube/cubic-phase HfO2 nanoparticle hybrid nanocomposites
251.
Possibilities of production of active carbon from biological sludge
252.
Preliminary assessment of preconditions to deliver carbon neutrality in apartment buildings by 2050
253.
Preparation of carbon aerogels from 5-methylresorcinol-formaldehyde gels
254.
Preparation of fibrous electrospun membranes with activated carbon filler
255.
Preparation of fine carbon aerogel powder
256.
Preparation of metal-doped carbon aerogels from oil shale processing by-products
257.
Preparation of nanostructured carbon materials
258.
Promoting building materials that have lower embodied carbon and energy in public procurements : experience from Estonia
259.
Prostaglandin synthesis in the coral Plexaura homomalla : control of prostaglandin stereochemistry at carbon 15 by cyclooxygenases
260.
Purification of phenolic wastewater using aerobic bio-oxidation combined with activated carbon treatment and ozonation
261.
Quantum chemical study of the merostabilzation of carbon radicals and radical ions
262.
Reconstructing Late Ordovician carbon cycle variations
263.
Reconstruction of organic carbon sources in the palaeoenvironment of a lake : an optical approach
264.
Reducing of carbon dioxide emissions at oil shale ash deposition
265.
Role of a productive lake in carbon sequestration within a calcareous catchment
266.
Role of defects in the physiological fate of carbon nanomaterials
267.
Shungite-derived graphene as a carbon support for bifunctional oxygen electrocatalysts
268.
Simulation of detecting contact nonlinearity in carbon fibre polymer using ultrasonic nonlinear delayed time reversal
269.
Simulation of solitary wave propagation in carbon fibre reinforced polymer
270.
Sol-gel derived carbon microspheres by continuous ultrasonic spray pyrolysis
271.
Stratigraphy and facies differences of the Middle Darriwilian Isotopic Carbon Excursion (MDICE) in Baltoscandia
272.
Studies of the modified bagasse plastics carbonization and a feasibility to produce carbon construction materials
273.
Synthesis and characterization of mechanical properties of boron–carbon-based superhard composites
274.
Zero valent iron chemistry evaluated for gas phase carbon tet dechlorination
275.
The effect of carbon content on the mechanical and tribological properties of WC-Co cemented carbides
276.
The Guttenberg carbon isotope excursion (GICE; Ordovician) in Estonia
277.
The influence of carbon and molybdenum in reactive sintered (Ti, Mo)C-NiCr cermets [Electronic resource]
278.
The influence of embedded electronics on the structural performance in carbon fiber laminates
279.
The influence of oil shale combustion technology on carbon dioxide emission
280.
The interaction pathway in the mechano-ultrasonically assisted and carbon-nanotubes augmented nickel–aluminum system
281.
The succession of Hirnantian events based on data from Baltica : brachiopods, chitinozoans, conodonts, and carbon isotopes
282.
Thermal decomposition of calcium sulfate in carbon monoxide
283.
Three global carbon isotope shifts in the Silurian of Podolia (Ukraine) : stratigraphical implications
284.
Transition towards university campus carbon neutrality by connecting to city district heating network
285.
Treatment of samine polluted groundwater by means of granulated activated carbon in a packed bed adsorber
286.
Treatment of samine-polluted groundwater by adsorption on granulated activated carbon
287.
Two kinetic regime behaviour in carbon dioxide gasification of carbons
288.
Utilization of oil shale ash as a concrete constituent and carbon sink
289.
Wastewater purification using aerobic bio-oxidation combined with activated carbon treatment and ozonation
290.
Xylidini-polluted groundwater purification-wet air oxidation used granulated active carbon
võtmesõna
105
1.
carbon steel
2.
carbon steel
3.
low-carbon ferritic-pearlitic steel
4.
carbon peak and carbon neutralization
5.
AISI304 austenitic stainless steel
6.
alternative steel binders
7.
austenitic stainless steel
8.
corrosion-resistant steel
9.
Electric Steel
10.
electrical steel
11.
ferritic steel 13CrMo4-4
12.
ferritic/martensitic steel
13.
Hadfield steel
14.
highresisting steel
15.
low-alloy steel
16.
non-oriented (NO) steel sheet
17.
non-oriented electrical steel
18.
perforated steel tape
19.
PM tool steel
20.
short steel fibre orientation
21.
slotted-in steel plate
22.
stainless steel
23.
stainless steel 316L
24.
steel
25.
steel binder
26.
steel cutting
27.
steel fibers
28.
steel fibre reinforced concrete
29.
steel fibres
30.
steel laminations
31.
steel matrix
32.
steel sandwich deck
33.
steel slag
34.
steel structures
35.
steel-level bureaucracy
36.
tool steel
37.
activated carbon aerogel
38.
black carbon
39.
carbide-derived carbon
40.
carbon
41.
carbon dioxide
42.
carbon accumulation rate
43.
carbon aerogel
44.
carbon aerogels
45.
carbon and oxygen isotopes
46.
carbon balance
47.
carbon burial
48.
carbon capture
49.
carbon capture and storage
50.
carbon capture and storage (CCS)
51.
carbon capture and utilization
52.
carbon dioxide
53.
carbon dioxide concentration
54.
carbon dioxide metanation
55.
carbon dioxide methanation
56.
carbon dioxide sequestration
57.
carbon electrodes
58.
carbon emission reduction
59.
carbon emissions
60.
carbon fiber
61.
carbon fibre
62.
carbon fibre reinforced polymer
63.
carbon isotope
64.
Carbon Isotope Excursion
65.
carbon isotope stratigraphy
66.
carbon isotopes
67.
carbon materials
68.
carbon nanofiber
69.
carbon nanofibres
70.
carbon nanoparticles
71.
carbon nanotube
72.
carbon nanotubes
73.
carbon neutral building materials
74.
carbon neutrality
75.
carbon pricing
76.
carbon sequestration
77.
carbon stable isotope
78.
carbon support
79.
carbon tax
80.
carbon trading
81.
carbon trading market
82.
D-glucose derived carbon
83.
diamond-like carbon
84.
dissolved organic carbon
85.
embodied carbon
86.
fossil carbon content
87.
glassy carbon electrode
88.
high surface area carbon
89.
hydrogen-carbon ratio
90.
inorganic carbon compounds
91.
Late Ludfordian Carbon Isotope Excursion
92.
low carbon
93.
low-carbon industry
94.
marine carbon dioxide system
95.
methane-derived carbon
96.
oxygen and carbon isotopes
97.
particulate organic carbon
98.
polymer with carbon black
99.
Porous carbon electrode
100.
sedimentary carbon
101.
single- and multi-walled carbon nanotubes
102.
single-walled carbon nanotubes
103.
single‐walled carbon nanotubes
104.
smart zero carbon city
105.
soil organic carbon
allikas
13
1.
Light-Weight Steel and Aluminium Structures : Fourth International Conference on Steel and Aluminium Structures : Espoo, Finland, 20-23 June 1999
2.
United Nations Economic Commission for Europe (UN ECE) Working Party on Steel : Seminar on the Processing, Utilization and Disposal of Waste in the Steel Industry : Balatonszeplak (Hungary), 3-6 June 1996
3.
Journal of constructional steel research
4.
NSCC 2001 proceedings : 9th Nordic Steel Construction Conference : Helsinki, Finland, 18-20 June 2001
5.
Proceedings of the Seventh International Conference on Clean Steel, Hungary, 2007
6.
Baltic Carbon Forum
7.
C – journal of carbon research
8.
C : Journal of Carbon Research
9.
Carbon
10.
Carbon Letters
11.
Carbon trends
12.
Fullerenes, nanotubes and carbon nanostructures
13.
International Carbon 2010 conference : July 11th to July 16th, Clemson, SC, USA
kirjastus/väljaandja
2
1.
Swedish Institute of Steel Construction
2.
Korean Carbon Society
DOI
1
1.
https://doi.org/10.1016/j.carbon.2022.10.085