Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
mechanical properties (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
82
Vaata veel..
(6/842)
Ekspordi
ekspordi kõik päringu tulemused
(82)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel ajakirjas
Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Guana, H.D.
;
Lia, C.J.
;
Gaoa, P.
;
Prashanth, Konda Gokuldoss
Materials science and engineering : A
2020
/
art. 138630, 5 p. : ill
https://doi.org/10.1016/j.msea.2019.138630
artikkel ajakirjas
2
artikkel ajakirjas
Assessment of zirconia doped hardmetals as tribomaterials
Hussainova, Irina
;
Antonov, Maksim
;
Voltšihhin, Nikolai
Wear
2011
/
p. 1909-1915 : ill
artikkel ajakirjas
3
artikkel ajakirjas
Biomimetic design of implants for long bone critical-sized defects
Rezapourian, Mansoureh
;
Kamboj, Nikhil Kumar
;
Jasiuk, Iwona
;
Hussainova, Irina
Journal of the Mechanical Behavior of Biomedical Materials
2022
/
art. 105370
https://doi.org/10.1016/j.jmbbm.2022.105370
artikkel ajakirjas
4
artikkel ajakirjas
Cermets with Fe-alloy binder : A review
Kübarsepp, Jakob
;
Juhani, Kristjan
International journal of refractory metals and hard materials
2020
/
art. 105290, 25 p. : ill
https://doi.org/10.1016/j.ijrmhm.2020.105290
artikkel ajakirjas
5
artikkel ajakirjas
Characterization of microstructure and mechanical properties of friction stir welded AlMg5-Al2O3 nanocomposites
Babu, N. Kishore
;
Kallip, Kaspar
;
Leparoux, Marc
Materials science and engineering : A
2016
/
p. 109-122 : ill
http://dx.doi.org/10.1016/j.msea.2016.01.102
artikkel ajakirjas
6
artikkel ajakirjas
Comparison of laminate stiffness as measured by three experimental methods
Lasn, Kaspar
;
Echtermeyer, Andreas T.
;
Klauson, Aleksander
;
Chati, Farid
;
Decultot, Dominique
Polymer testing
2015
/
p. 143-152 : ill
http://dx.doi.org/10.1016/j.polymertesting.2015.04.006
artikkel ajakirjas
7
artikkel ajakirjas
Densification and characterization of spark plasma sintered ZrC–ZrO2 composites
Hussainova, Irina
;
Voltšihhin, Nikolai
;
Cura, M. Erkin
;
Hannula, Simo-Pekka
Materials science and engineering : A - structural materials: properties, microstructure and processing
2014
/
p. 75-81 : ill
artikkel ajakirjas
8
artikkel ajakirjas
Detachable connecting fittings failure loads on plywood furniture
Saar, Kaarel
;
Kers, Jaan
;
Luga, Üllar
;
Reiska, Ahto
Proceedings of the Estonian Academy of Sciences
2015
/
p. 113-117 : ill
http://dx.doi.org/10.3176/proc.2015.1S.07
artikkel ajakirjas
9
artikkel kogumikus
Development of hemp hurd particleboards from formaldehyde-free resins
Alao, Percy Festus
;
Tobias, Micah Onyedikachi
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
;
Goljandin, Dmitri
11th International Conference Biosystems Engineering : May 6-8, 2020 in Tartu, Estonia : book of abstracts [Võrguteavik]
2020
/
p. 99
https://www.ester.ee/record=b5347289*est
artikkel kogumikus
10
artikkel ajakirjas
Development of hemp hurd particleboards from formaldehyde-free resins
Alao, Percy Festus
;
Tobias, Micah Onyedikachi
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
;
Goljandin, Dmitri
Agronomy research
2020
/
p. 679–688 : ill
https://doi.org/10.15159/AR.20.127
artikkel ajakirjas
11
artikkel ajakirjas
Dry reciprocating sliding wear behaviour of alumina–silicon carbide nanocomposite fabricated by ceramic injection molding
Smirnov, Anton
;
Bartolome, Jose F.
;
Moya, J.S.
;
Kern, F.
;
Gadow, R.
Journal of the European Ceramic Society
2011
/
p. 469-474 : ill
artikkel ajakirjas
12
artikkel ajakirjas
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites
Kallakas, Heikko
;
Shamim, M. A.
;
Olutubo, T.
;
Poltimäe, Triinu
;
Süld, Tiia-Maaja
;
Krumme, Andres
;
Kers, Jaan
Agronomy research
2015
/
p. 639-653 : ill
http://agronomy.emu.ee/vol133/13_3_2_B5.pdf
artikkel ajakirjas
13
artikkel kogumikus
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites [Electronic resource]
Kallakas, Heikko
;
Shamim, M. A.
;
Olutubo, T.
;
Poltimäe, Triinu
;
Süld, Tiia-Maaja
;
Krumme, Andres
;
Kers, Jaan
6th International Conference Biosystems Engineering 2015 : 7-8 May 2015, Tartu, Estonia : book of abstracts
2015
/
p. 94. [CD-ROM]
http://bse.emu.ee/BSE2015_Book%20of%20ABSTRACTS_ISBN.pdf
artikkel kogumikus
14
artikkel ajakirjas
Effect of fly-ash cenospheres on properties of clay-ceramic syntactic foams
Rugele, Kristine
;
Lehmhus, Dirk
;
Hussainova, Irina
;
Peculevica, Julite
;
Lisnanskis, Marks
;
Shishkin, Andrei
Materials
2017
/
art. 828, p. 1-17 : ill
http://dx.doi.org/10.3390/ma10070828
artikkel ajakirjas
15
artikkel ajakirjas
Effect of hemp fibre length on the properties of polypropylene composites
Alao, Percy Festus
;
Kallakas, Heikko
;
Poltimäe, Triinu
;
Kers, Jaan
Agronomy research
2019
/
p. 1517–1531 ill
https://doi.org/10.15159/AR.19.146
artikkel ajakirjas
16
artikkel ajakirjas
Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials
Kwon, Hansang
;
Saarna, Mart
;
Yoon, Songhak
;
Weidenkaff, Anke
;
Leparoux, Marc
Materials science and engineering : A
2014
/
p. 338-345
https://doi.org/10.1016/j.msea.2013.10.046
artikkel ajakirjas
17
artikkel ajakirjas
Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys
Xi, Lixia
;
Guo, Shuang
;
Prashanth, Konda Gokuldoss
;
Sarac, Baran
;
Eckert, Jürgen
Vacuum
2021
/
art. 110405
https://doi.org/10.1016/j.vacuum.2021.110405
artikkel ajakirjas
18
artikkel ajakirjas
Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
Singh, Neera
;
Ummethala, Raghunandan
;
Surreddi, Kumar Babu
;
Jayaraj, Jayamani
;
Sokkalingam, Rathinavelu
;
Rajput, Monika
;
Chatterjee, Kaushik
;
Prashanth, Konda Gokuldoss
Journal of alloys and compounds
2022
/
art. 166502
https://doi.org/10.1016/j.jallcom.2022.166502
artikkel ajakirjas
19
artikkel ajakirjas
Efficient barrier properties of mechanically enhanced agro-extracted cellulosic biocomposites
Qasim, Umair
;
Fatima, R.
;
Usman, M.
Materials today chemistry
2020
/
art. 100378, 8 p. : ill
https://doi.org/10.1016/j.mtchem.2020.100378
artikkel ajakirjas
20
artikkel kogumikus
Electrical and mechanical properties of service-aged medium voltage porcelain support insulators
Kiitam, Ivar
;
Saarna, Mart
;
Taklaja, Paul
;
Tealane, Marko
;
Palu, Ivo
2020 6th IEEE International Energy Conference (ENERGYCon)
2020
/
p. 702-706
https://doi.org/10.1109/ENERGYCon48941.2020.9236596
artikkel kogumikus
21
artikkel ajakirjas
Electroconductive alumina-TiC-Ni nanocomposites obtained by spark plasma sintering
Rodriguez-Suarez, T.
;
Bartolome, Jose F.
;
Smirnov, Anton
;
Lopez-Esteban, S.
;
Diaz, L.A.
;
Torrecillas, R.
;
Moya, J.S.
Ceramics international
2011
/
p. 1631-1636 : ill
artikkel ajakirjas
22
artikkel ajakirjas
Evolution of microstructure and mechanical properties of LM25–HEA composite processed through stir casting with a bottom pouring system
Chinababu, Mekala
;
Krishna, Nandivelegu Naga
;
Sivaprasad, Katakam
;
Prashanth, Konda Gokuldoss
;
Bhaskara, Eluri
Materials
2022
/
art. 230
https://doi.org/10.3390/ma15010230
artikkel ajakirjas
23
artikkel ajakirjas
Fabrication of Cu-W nanocomposites by integration of self-propagating high-temperature synthesis and hot explosive consolidation technologies
Aydinyan, Sofiya
;
Kirakosyan, Hasmik
;
Zakaryan, Marieta
Eurasian chemico-technological journal
2018
/
p. 301-309 : ill
https://doi.org/10.18321/ectj763
artikkel ajakirjas
24
artikkel ajakirjas
High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering
Babu, N. Kishore
;
Kallip, Kaspar
;
Leparoux, Marc
;
AlOgab, Khaled A.
;
Talari, Mahesh Kumar
;
Alqathani, N. M.
The international journal of advanced manufacturing technology
2017
/
p. 445-453 : ill
https://doi.org/10.1007/s00170-017-9994-9
artikkel ajakirjas
25
artikkel ajakirjas
Impact of alkali and silane treatment on hemp/PLA composites’ performance: from micro to macro scale
Alao, Percy Festus
;
Marrot, Laetitia
;
Burnard, Michael David
;
Lavrič, Gregor
;
Saarna, Mart
;
Kers, Jaan
Polymers
2021
/
art. 851, 18 p. : ill
https://doi.org/10.3390/polym13060851
artikkel ajakirjas
Seotud publikatsioonid
1
Characterisation of frost-retted hemp fibres for use as reinforcement in biocomposites = Külmligu kanepikiudude karakteriseerimine kasutamiseks sarrusena biokomposiitides
Kirjeid leitud 82, kuvan
1 - 25
eelmine
1
2
3
4
järgmine
pealkiri
701
1.
Abrasive wear and mechanical properties of carbide composites
2.
Assessment of associations between arterial mechanical properties and biochemical blood markers for early detection of atherosclerosis
3.
Changes in the acidity and mechanical properties of paper during the artificial ageing
4.
Characterization of microstructure and mechanical properties of cermets at micro- and nanoscales
5.
Characterization of microstructure and mechanical properties of friction stir welded AlMg5-Al2O3 nanocomposites
6.
Composition and structure of bimodal WC-Co materials related to mechanical properties and abrasive wear
7.
Determination of mechanical properties of thin hard coatings using nanoindentation
8.
Determination of the mechanical properties of carbide composites by spherical indentation
9.
Direct measurement of mechanical properties of metal to be used in manufacture of power plant equipment
10.
Durability of wood plastic composites : influence of weathering on the mechanical properties
11.
Effect of accelerated weathering on the mechanical properties of wood-plastic composites
12.
Effect of atomic layer deposited aluminium oxide on mechanical properties of porous silicon carbide
13.
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites
14.
Effect of different hardwood species and lay-up schemes on the mechanical properties of plywood
15.
Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet
16.
Electrical and mechanical properties of service-aged medium voltage porcelain support insulators
17.
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
18.
Evaluation of mechanical properties and residual stresses of hard PVD coatings
19.
Fire and mechanical properties of hemp and clay boards for timber structures
20.
Foreign object induced fiber undulation influence on mechanical properties of composite laminate
21.
Impact pressure on mechanical properties of aluminum based composite by ECAP-parallel channel
22.
Influence of birch false heartwood on the physical and mechanical properties of wood-plastic composites
23.
Influence of cellulose content on rheological and mechanical properties of “green” poly(lactic) acid/cellulose composites
24.
Influence of extraction methods on the raw material physic-mechanical properties of fillers
25.
Influence of interphases on the mechanical properties of alumina nanofibers reinforced alumina nanocomposite
26.
Investigation of dynamic mechanical properties of Estonian clay Arumetsa during firing
27.
Local tribo-mechanical properties of TiC-based cermets by nanoindentation
28.
Mechanical properties and features of erosion of cermets
29.
Mechanical properties and fracture developed in nanocopper by severe plastic deformations
30.
Mechanical properties and fracture of nanocopper by severe plastic deformations
31.
Mechanical properties and microstructure of reactive sintered WC-TiC-Co cemented carbides
32.
Mechanical properties and wear performance of compression sintered TiC based cermets
33.
Mechanical properties of chromium carbide based cermets at micro-level
34.
Mechanical properties of chromium carbide based cermets at micro-level [Electronic resource]
35.
Mechanical properties of connecting fittings for plywood furniture
36.
Mechanical properties of hard metals and their erosive wear resistance
37.
Mechanical properties of pinewood (Pinus Sylvestris) swollen in organic liquids
38.
Mechanical properties of pinewood treated with aqueous solutions of organic substances
39.
Mechanical properties of thin hard coatings on TiC-NiMo substrates
40.
Mechanical properties, microstructure, and actuation behavior of wire arc additive manufactured nitinol : titanium bimetallic structures
41.
Method elaboration for measuring the structural-mechanical properties of genutine gel and chewing candies
42.
Microstructural evolution and mechanical properties of nanostructured copper
43.
Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
44.
Microstructure and mechanical properties of Al–(12-20)Si bi-material fabricated by selective laser melting
45.
Microstructure and mechanical properties of hea alloys fabricated by selective laser melting of powder mixtures
46.
Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgy
47.
Microstructure and mechanical properties of NiTi-SS bimetallic structures built using wire arc additive manufacturing
48.
Microstructure and physical-mechanical properties evolution of pure tantalum processed with hard cyclic viscoplastic deformation
49.
Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al2O3 nanocomposites
50.
Microstructure, mechanical properties, and corrosion behavior of 06Cr15Ni4CuMo processed by using selective laser melting
51.
Microstructure, texture and mechanical properties of cyclic expansion-extrusion deformed pure copper
52.
Necessity of mechanical properties testing for service exposed power plant steels
53.
Phase formation, microstructure and mechanical properties of Mg67Ag33 as potential biomaterial
54.
Preliminary investigation into mechanical properties of clay reinforced with natural fibres
55.
Processing and mechanical properties of ZrC-ZrO2 composites
56.
Punch lifetime in fine-blanking with optimum combination of mechanical properties
57.
Recycling of PA-12 in additive manufacturing and the improvement of its mechanical properties
58.
Rheological and mechanical properties of poly(lactic) acid- and polyethylene-based cellulosic composites
59.
Rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose composites
60.
Selective laser melting of 316L stainless steel : Influence of TiB2 addition on microstructure and mechanical properties
61.
Selective laser melting of TiC-Fe using pulse shaping : microstructure and mechanical properties
62.
Small scale mechanical properties of chromium carbide-based materials
63.
Structure and mechanical properties of the engine valves with intermetallic disk
64.
Structure and mechanical properties of Ti-Al
65.
Synthesis and characterization of mechanical properties of boron–carbon-based superhard composites
66.
The determination of mechanical properties of orthotropic composites
67.
The effect of ionic liquids on the mechanical properties of electrospun polyacrylonitrile membranes
68.
The influence of processing parameters on mechanical properties of spark plasma sintered chromium carbide based cermets
69.
Thermal and mechanical properties of composites based on treated lignocellulosic fibres
70.
Thermal degradation and mechanical properties of biofiber-reinforced polyethylene composites
71.
Tribological and mechanical properties investigations of post-consumer cotton textiles
72.
Wear behaviour and mechanical properties of sinterhipped hardmetals
73.
A method of using miniature samples for determining mechanical properties of metal of power-generating equipment at thermal power stations in Estonia
74.
Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites
75.
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
76.
Comparison of the microstructures and mechanical properties of TI6AL4V fabricated by electron beam melting, spark plasma sintering, and selective laser remelting
77.
Effect of birch false heartwood on the physical and mechanical properties of wood-plastic composites [Online resource]
78.
Effect of chemical modification of wood flour on the mechanical properties of wood-plastic composites [Electronic resource]
79.
Effect of hard cyclic viscoplastic deformation on the microstructure, mechanical properties, and electrical conductivity of Cu-Cr alloy
80.
Effect of high-force impulse loads on the modification of mechanical properties of heat-resistant steel after service
81.
Effect of interlayer delay on the microstructure and mechanical properties of wire arc additive manufactured wall structures
82.
Effect of strain rate and temperature on mechanical properties and fracture mechanism of the dispersion strengthened Al-12Al4C3 system
83.
Electrical conductivity and mechanical properties of Cu-0.7wt% Cr and Cu-1.0wt% Cr alloys processed by severe plastic deformation
84.
Evolution of microstructure and mechanical properties of LM25–HEA composite processed through stir casting with a bottom pouring system
85.
Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose composites
86.
Influence of cellulose content on rheological and mechanical properties of poly(lactic) acid/cellulose and low-density polyethylene/cellulose composites
87.
Influence of strain rate and temperature on mechanical properties and fracture mechanism of the dispersion strengthened Al-12Al4C3 system
88.
Mechanical properties and microstructural evolution of Ti-25Nb-6Zr alloy fabricated by spark plasma sintering at different temperatures
89.
Mechanical properties and self-healing capacity of ultra high performance fibre reinforced concrete with alumina nano-fibres : tailoring ultra high durability concrete for aggressive exposure scenarios
90.
Mechanical properties of aluminum, zirconium, hafnium and tantalum oxides and their nanolaminates grown by atomic layer deposition
91.
Microstructure evolution and changes in mechanical properties in WC-Co composites during recycling by oxidation-reduction process and sintering
92.
Optimization ofwheat-straw-extractedcellulose via response surface methodology and mechanical properties of its poly(lactide)-based biocomposites
93.
Selective laser melting of Al-7Si-0.5 Mg-0.5Cu : effect of heat treatment on microstructure evolution, mechanical properties and wear resistance
94.
Selective laser melting of Cu-Ni-Sn : a comprehensive study on the microstructure, mechanical properties, and deformation behavior
95.
The effect of temperature, humidity and mechanical properties on crack formation on external thin plasters of ETICS
96.
The influence of birch (Betula pendula) false heartwood on the mechanical properties of wood-plastic composites = Kase (Betula pendula) väärlülipuidu mõju puitplastkomposiitide mehaanilistele omadustele
97.
The influence of conductive additives on the mechanical properties of electrospun mats = Juhtivate lisandite mõju elektrokedratud nanokiuliste lausmaterjalide mehaanilistele omadustele
98.
The influence of content and production parameters on the structure and mechanical properties of TiC-NiMo cemented carbides
99.
The influence of TiC powder to reactive sintered TiC-NiMo cermets microstructure and mechanical properties [Electronic resource]
100.
The study of the laser hardering parameters on the structure and the mechanical properties of the PM steel Vanadis 6
101.
Tungsten matrix composite reinforced with CoCrFeMnNi high-entropy alloy : impact of processing routes on microstructure and mechanical properties
102.
Acousto-mechanical instrumentation of multiscale hysteretic memristive properties of the skin with nonlinear time reversal imaging
103.
Changes in phosphorite composition and properties during mechanical activation
104.
Cold storage and mechanical treatment affects renneting properties of milk
105.
Effect of free carbon on the mechanical and tribological properties of cemented carbides
106.
Effect of soaking/oven-drying on mechanical and physical properties of birch (Betula spp.) plywood
107.
Grain size-dependent mechanical and wear properties of TiC-FeNi steel cermets
108.
Impact of mechanical activation on physical and chemical properties of phosphorite concentrates
109.
Influence of filler proportion on mechanical and physical properties of particulate composite
110.
Investigation of mechanical and physicochemical properties of clinically retrieved titanium-niobium orthodontic archwires
111.
Mechanical and physical properties of hemp fiber-mat reinforced polyethylene film composites
112.
Mechanical and physical properties of industrial hemp-based insulation materials
113.
Mechanical and physical properties of silane crosslinked wood flour reinforced composites
114.
Mechanical and physical properties of thermally modified wood flour reinforced polypropylene composites
115.
Mechanical and physical properties of thermally modified wood flour reinforced polypropylene composites [Online resource]
116.
Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying
117.
Microstructure, mechanical, and impression creep properties of AlMg5-0.5 vol% Al2O3 nanocomposites
118.
Nanosructured copper manufacturing features and mechanical/physical properties forming
119.
Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
120.
The effect of carbon content on the mechanical and tribological properties of WC-Co cemented carbides
121.
The influence of accelerated weathering on the mechanical and physical properties of wood-plastic composites
122.
Thermal, Mechanical, and Acoustic Properties of Polydimethylsiloxane Filled with Hollow Glass Microspheres
123.
Comparison of mechanical and antibacterial properties of TiO2/Ag ceramics and Ti6Al4V-TiO2/Ag composite materials using combined SLM-SPS techniques
124.
Evaluation of some mechanical and physical properties of ‘Oriented Strand Board (OSB/3)’ following cyclic accelerated aging tests
125.
Influence of hollow glass microspheres on the mechanical and physical properties and cost of particle reinforced polymer composites
126.
Mechanical and tribological properties of 100-nm thick alumina films prepared by atomic layer deposition on Si(100) substrates
127.
Multiscale memristive properties of skin inducedby memory effects of cyclic stress-relaxationloadings : data fusion from ground truth nonlin-ear acousto-mechanical testing
128.
Preliminary study of the influence of post curing parameters to the particle reinforced composite's mechanical and physical properties
129.
Role of A-site (Sr), B-site (Y), and A, B sites (Sr, Y) substitution in lead-free BaTiO3 ceramic compounds : structural, optical, microstructure, mechanical, and thermal conductivity properties
130.
Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
131.
Standards for acousto-mechanical evaluation of multiscale hysteretic properties of complex material with nonlinear time reversal imaging
132.
The effect of temperature and mechanical treatment on the properties of xanthan's, tara's and their blend's solutions
133.
Efficient barrier properties of mechanically enhanced agro-extracted cellulosic biocomposites
134.
Micromechanical properties and electrical conductivity of Cu and Cu-0.7wt% Cr alloy
135.
Micromechanical properties and erosive wear performance of chromium carbide based cermets
136.
Micromechanical properties and wear resistance of powder coatings
137.
Phases micromechanical properties of Ni-base superalloy measured by nanoindentation
138.
Properties of CuInS2 free surface and the effect of conductive polymer layers on these properties
139.
Ripening and sensory properties of spice-cured sprats and sensory properties development
140.
The Composition, Physicochemical Properties, Antioxidant Activity, and Sensory Properties of Estonian Honeys
141.
A conceptual framework for software developing in mechanical CAD
142.
An experimental investigation of the mechanical and acoustical transmission paths on a car
143.
Analysis of mechanical vibrations caused by eccentricity in a slow-speed slotless permanent magnet generator
144.
Analysis of the reciprocal wear testing of Aluminum AA1050 processed by a novel mechanical nanostructuring technique
145.
Behavior of Estonian kukersite kerogen in molecular mechanical force field
146.
Biomimetic mechanical design for soft-bodied underwater vehicles
147.
Camera gimbal performance improvement with spinning-mass mechanical gyroscopes
148.
Characterization of metallic powders produced by mechanical milling
149.
Combustion synthesis of TiC-ZrC composite powder : role of mechanical activation
150.
Correlation between electrical bioimpedance and pressure waveform in radial artery and in mechanical pulsating pipe system
151.
Coupled magneto-mechanical analysis of iron sheets under biaxial stress
152.
Design of a hydraulic-mechanical load-sensing system using object-oriented modelling and simulation
153.
Determination of physical, mechanical and burning characteristics of polymeric waste material briquettes
154.
Distributed computing applied to sensitivity analysis of mechanical systems
155.
Effect of mechanical stress on excess loss of electrical steel sheets
156.
Experience of continuing professional development of mechanical engineers in Estonia
157.
Experimental spray powders and coatings produced from recycled hardmetal by various mechanical methods
158.
Experimental testing of exterior wall mounted mechanical ventilation exhaust air outlet devices
159.
Faculty of Mechanical Engineering
160.
Faculty of Mechanical Engineering : 1996/1997 : undergraduate programmes, research areas, services and consultations
161.
Faculty of Mechanical Engineering : 1998-1999 : programmes, research areas, services and consultations
162.
Faculty of Mechanical Engineering : 2000 : programmes, areas of research and development, services and consultations
163.
Faculty of Mechanical Engineering 2014
164.
Faculty of Mechanical Engineering 2015
165.
Fatigue performance and mechanical reliability of cemented carbides
166.
Fault detecting accuracy of mechanical damages in rolling bearings
167.
Friction and wear of mechanical equipment
168.
Generative design in development of mechanical components for magnus effect-based wind turbine
169.
Home-reading texts for second-year students of mechanical engineering
170.
Implementation of 3D modeling techniques for design of mechanical products with modular structure
171.
In-situ study of TiO2 thin-films mechanical behavior under loading
172.
Intelligence system for design and investigation mechanical values sensors
173.
Knowledge based decision making in mechanical workshops
174.
Magneto-mechanical modeling of electrical steel sheets
175.
Mathematical models in mechanical and biomedical tribology with computational simulations/optimization methods
176.
Mechanical activation of magnesium silicates for mineral carbonation, a review
177.
Mechanical activation of medium basicity steel slag under dry condition for carbonation curing
178.
Mechanical and pyrometallurgical recycling of electronic wastes
179.
Mechanical and structural characterization of multiphase B4C/Al composites synthesized by SHS
180.
Mechanical and tribological behavior of gravity and squeeze cast novel Al-Si alloy
181.
Mechanical and wear behaviour of compression sintered hardmetals
182.
Mechanical and wear behaviour of Tic-base cermets sintered by different techniques
183.
Mechanical behavior of Ti6Al4V scaffolds filled with CaSiO3 for implant applications
184.
Mechanical behaviour of nanostructured copper produced by SPD method
185.
Mechanical characteristics of the AC linear drives
186.
Mechanical characterization and modeling of chromium carbide based composites
187.
Mechanical characterization and wear performance of WC–ZrO2–Ni cermets produced by hot isostatic pressing
188.
Mechanical disintegration of Al-W-B waste material
189.
Mechanical engineering study programmes in progress
190.
Mechanical recycling of compounded plastic waste for material valorization by briquetting
191.
Mechanical recycling of compounded polymeric waste and evaluation of briquetting parameters
192.
Mechanical recycling of electronic wastes by high-energy disintegrator mills
193.
Mechanical recycling of electronic wastes for materials recovery
194.
Mechanical strain increases protein tyrosine phosphorylation in airway smooth muscle cells
195.
Mechanical treatment of metal wastes
196.
Mechanical waves in myelinated axons
197.
Mechanical vibration analysis of induction machine under dynamic rotor eccentricity [Electronic resource]
198.
Mehaanikateaduskond = Faculty of Mechanical Engineering
199.
Metal powders produced by mechanical methods
200.
Metallic powders produced by mechanical methods
201.
Microstructural and mechanical characteristics of in situ synthesized chromium-nickel-graphite composites
202.
Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix composite
203.
Microstructure and mechanical characterization of WC-based composites doped by zirconia
204.
Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
205.
Modeling of hysteresis losses in ferromagnetic laminations under mechanical stress
206.
Modularization : Exploring opportunities for knowledge transfer between the mechanical engineering and construction industry
207.
Network monitoring of educational and industrial needs for the mechanical engineering sector
208.
Numerical simulation of mechanical waves in biomembranes
209.
Numerical study on the effect of geometry on mechanical behavior of triply periodic minimal surfaces
210.
On mechanical aspects of nerve pulse propagation and the Boussinesq paradigm
211.
Optimization of mechanical strength of titania fibers fabricated by direct drawing
212.
Processing and mechanical characterization of WC–ZrO2–Ni hybrids
213.
Processing of industrial metal scrap by mechanical means
214.
Quality assurance in mechanical testing laboratory by participating in proficiency test
215.
Quantum mechanical transforms between [hii]- and [kapa]-space as a signal processing problem
216.
Recrystallization of CdTe film under conditions of high temperature and mechanical pressure
217.
Removal of mechanical additives from the surface of cast niobium
218.
Rotational single sheet tester for multiaxial magneto-mechanical effects in steel sheets
219.
Supporting mechanical design with visual programming in the NUT environment
220.
Synthesis of TiC by mechanical activation of powder components
221.
Synthesis of TiC powder by mechanical activation
222.
30 years of aerodynamic research at Faculty of Mechanical Engineering
223.
Treatment of metal wastes by mechanical and chemical means
224.
Utilisation of industrial metal scrap by mechanical means
225.
30 years of aerodynamic research at Faculty of Mechanical Engineering
226.
Physical and thermodynamic properties of phenol-rich oil from oil shale : application of correlations based on bulk properties
227.
Predicting fuel properties using chemometrics : a review and an extension to temperature dependent physical properties by using infrared spectroscopy to predict density
228.
A multi-layer Cu:Ga/In sputtered precursor to improve structural properties of CIGS absorber layer
229.
A review of the synthesis and photoluminescence properties of hybrid ZnO and carbon nanomaterials
230.
A role of long-range interaction in ILM properties and defects creation in ionic crystals
231.
Ab initio calculations of elastic properties of isotropic and oriented Ti(1-x)AlxN hard coatings
232.
Ab inito study of GaN properties using VASP software package
233.
Abnormal oil rheological properties changing by ultrosound using different power
234.
Accelerated carbonation technology granulation of industrial waste : effects of mixture composition on product properties
235.
Acid/base properties of some conformationally flexible organocatalysts
236.
Acoustic and thermoacoustic properties of an additive manufactured lattice structure
237.
Adhesive properties of ozonated polyethylene
238.
Adhesive properties of ozone modified LDPE
239.
Adsorption properties of wheat straw, reed and douglas fir chars
240.
Aerated concrete microwave reflection and transmission properties in a wet environment
241.
Aerosol-assisted fine-tuning of optoelectrical properties of SWCNT films
242.
Aggregation properties of a series of novel L-phenylalanine derived surfactants
243.
Air permeability properties of cross laminated timber
244.
Aluminate-based nanostructured luminescent materials : design of processing and functional properties
245.
Analysis of switching properties of different high voltage IGBTs operating under hard-switching conditions
246.
Animation in Conrad: informal analysis of timing properties
247.
Antimicrobial and antioxidative properties of kitchen herbs
248.
Antimicrobial properties of onion and garlic preparations
249.
Application of vector-phase methods for an estimation of acoustic properties of premises on transport
250.
Applications of airborne laser scanning for determining marine geoid and surface waves properties
251.
Articulatory properties of Estonian palatalization by Russian L1 speakers
252.
Ash fouling of boiler tubes and thermophysical properties of deposits
253.
Bactericidal properties of electrochemically treated water
254.
Beam properties of trap detectors
255.
Biocidal properties study of silver nanoparticles used for application in green housing
256.
Boron carbide based composites microstructure and properties relationships to processing features
257.
Boron containing solid and superhard composites production techniques and properties [Electronic resource]
258.
Briquetting of municipal solid waste by different technologies in order to evaluate its quality and properties
259.
Carbon aerogel-cellulose films and fibres with electrical conductivity and antibacterial properties against cyanobacteria
260.
Carbon xerogel from 5-methylresorcinol-formaldehyde gel : the controllability of structural properties
261.
Changes in properties of urea-formaldehyde resins during structuration
262.
Characteristic properties of different vessel wake signals
263.
Characterization of the structure and properties of composite powder materials and coatings
264.
Characterizing the bond properties of automatically placed helical reinforcement in 3D printed concrete
265.
Chemical composition and physical properties of the rock
266.
Chemical properties of peat in three peatlands with balneological potential in Estonia
267.
Chemical properties of peat with balneological potential in Estonia
268.
CMOS technology based current source with harmonic reducing properties
269.
Combined positioning system for mapping measured properties of objects of arbitrary shape
270.
Comparison of different sea buckthorn berries on the basis of physical properties
271.
Comparison of different sea buckthorn berry varieties on the basis of physical properties
272.
Comparison of direct and indirect methods of tensile properties determination for post-exposed power plant steels
273.
Comparison of performance-based specification properties for asphalt binders sourced from around the world
274.
Comparison of storage proteins and baking properties of triticale
275.
Comparison of the ecotoxic properties of oil shale industry by-products to those of coal ash
276.
Composition and binder properties of Estonian kukersite oil shale ash
277.
Composition and properties of oil shale ash concrete
278.
Composition and properties of the heating products of calcium phosphate-aluminociliate mixtures
279.
Composition and properties of the heating products of calcium phosphate-aluminosilicate mixtures
280.
Composition and properties of the heating products of calcium phosphate-aluminosilicates mixtures
281.
Composition and properties of the iron hydroxides-cemented lenses in Estonian sandstone of Middle Devonian Age
282.
Composition and properties of thermophosphates from apatite and aluminosilicates
283.
Composition and properties of thermophosphates from apatite and alumosilicates
284.
Composition and renneting properties of raw bulk milk in Estonia
285.
Composition, physico-chemical properties and antioxidant activity of Estonian honeys
286.
Computational chemistry approaches for understanding how structure determines properties
287.
Conodont bioapatite resembles vertebrate enamel by XRD properties
288.
CONRAD - a system for evoluating behavioural properties of embedded software
289.
Controlled formation of optically active centres responsible for opto-electronic properties of II-VI compounds
290.
Copper(I)-binding properties of de-coppering drugs for treatment of Wilson disease
291.
Corrosion protective properties of polypyrrole films on mild steel
292.
Covalent coupling of ionic liquid to carbon nanotubes : preparation and tribological properties
293.
CuInS2 thin films: formation by spray pyrolysis and properties
294.
Detailed modeling of sorptive and textural properties of CaO-based sorbents with various porous structures
295.
Determination of acoustic properties for open duct termination in hot jet conditions using FEM simulation
296.
Determination of circulating fluidized bed boiler thermal efficiency burning oil shale with different properties
297.
Determination of inhomogeneous properties of materials by analysis of ultrasonic wave motion
298.
Determination of tensile properties of power plant steels by testing of miniature specimens
299.
Determination of the acoustic transmission properties of IC-engine air inlet system components
300.
Determing properties of nonlinear microstructured materials by means of solitary waves
301.
Development of Functional Composite Cu(II)-Polyoxometalate/PLA with Antimicrobial Properties
302.
DFK resins and adhesives : (properties and application)
303.
Dynamic hardness as the most reliable number characterising the properties of materials
304.
Dynamic properties of clouds Cumulus humilis and Cumulus fractus extracted by solar radiation measurements
305.
eContractual choreography-language properties towards cross-organizational business collaboration
306.
EEG patterns and regularity properties during propofol induced anesthesia/sedation
307.
Efectiveness of different additives on minced flesh fish fingers physical, microbiological and rheological properties
308.
Effect cleaning procedure of Mo surface to the properties of MoSe2
309.
Effect of absorber surface modification on the optoelectronic properties of Cu2CdGeSe4 solar cells
310.
Effect of attrition milling on grain size and properties of composites
311.
Effect of carbide produces technique on the structure and properties of the Cr3C2-Ni cermets
312.
Effect of carbon content on sinterability and properties of ZrO2 doped WC-cermets
313.
Effect of EUF on evolution of microstructure and properties of advanced superalloys
314.
Effect of fly-ash cenospheres on properties of clay-ceramic syntactic foams
315.
Effect of germanium incorporation on the properties of kesterite Cu2ZnSn(S,Se)4 monograins
316.
Effect of heat treatment on the phase transformation and magnetic properties of BPSCCO/LPMO composites
317.
Effect of hemp fibre length on the properties of polypropylene composites
318.
Effect of hemp fibre length on the properties of polypropylene composites [Online resource]
319.
Effect of hydrocolloids on the rheological properties of ultrafiltrated curds
320.
Effect of new superhard phases formation on properties of composite processed by SHS
321.
Effect of polymer layer deposition and annealing on photovoltaic properties of CuInS2/polymer structures
322.
Effect of polypropylene grade on hinge properties
323.
Effect of sinter/HIP technology on properties of TiC-NiMo cermets
324.
Effect of solution spray rate on the properties of chemically sprayed ZnO:In thin films
325.
Effect of steam activation on oil shale semi-coke surface properties
326.
Effect of Zr doping on the structural and electrical properties of spray deposited TiO2 thin films
327.
Effect of the length of branches on hydrodynamic and conformational properties of hyperbranched polycarbosilanes
328.
Effect of the substrate surface on properties of RF sputtered magnetronantimony selenide (Sb2Se3) for thin-films
329.
Effect of wood species and storage time on particleboards properties
330.
Effects of deuterium implantation on the optical properties of Cu(InGa)Se2
331.
Electric properties of anorthite ceramics prepared from illitic clay and oil shale ash
332.
Electrical properties of polyaniline and polypyrrole bilayer structures
333.
Electrical properties of sprayed CuInS2 films for solar cells
334.
Electrical, optical and structural properties of sprayed CuInS2 films for solar cells
335.
Electroless Ni-P-MoS2-Al2O3 composite coating with hard and self-lubricating properties
336.
Electromagnetic shielding properties of ceramic spheres coated with paramagnetic metal
337.
Enantioselective properties of overoxidized polypyrrole films imprinted with L-Aspartic acid studied by EQCM technique
338.
Enhancing binding properties of imprinted polymers for the detection of small molecules
339.
Ensemble hindcast of the wave properties in the Baltic Sea [Online resource]
340.
Essential properties of reed and their influence on combustion equipment
341.
Estonian oil shale properties and utilization in power plants
342.
Evaluation of aquatic ecosystem planktonic communities state according to the properties of seston eczoenzyme activity
343.
Evaluation of microstructure and properties of heat-proof superalloy enforced by electrical upsetting forging
344.
Evolution of microstructure and properties in Ti-alloys during rapid electrocontact heating with SPD
345.
Experience in tensile properties determination by small punch test
346.
Extent of carbonate decomposition in CFB boiler firing oil shale with different properties
347.
Extremal properties of Euler - Maclaurin and Gregory quadrature formulas
348.
Fabrication, control and properties of nanocrystalline copper
349.
Fast static compaction of tests composed of independent sequences : basic properties and comparison of methods
350.
Fibrous alumina-based Ni-CeO2 catalyst : synthesis, structure and properties in propane pre-reforming
351.
Field work in the role of teaching and research of rock properties
352.
Fire tests on glued-laminated timber beams with specific local material properties
353.
First principle calculations of structural, electronic, optical and thermoelectric properties of tin (II) oxide
354.
Formation and properties of chemically sprayed Zno films
355.
Global data on earthworm abundance, biomass, diversity and corresponding environmental properties
356.
Growth and electrical properties of ZnO nanorod arrays prepared by chemical spray pyrolysis
357.
Growth and properties of ZnO films on polymeric substrate by spray pyrolysis method
358.
Growth, thermal stability, and magnetic properties of Co films on Ni3Al(001)
359.
Heart bioimpedance 3D FDM modelling with anisotropic tissue properties
360.
Heavy metals in the roadside soil : chemical analysis and dependency of properties on the local conditions
361.
High temperature properties of CdTe crystals, doped by Sb
362.
High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions
363.
Host-guest complexes of 2-aminocyclohexyl thioureas andzinc porphyrins: chiroptic properties and binding mechanism
364.
Identification of properties of microstructured materials by means of Gaussian wave packets and solitary waves
365.
Immunological properties and immobilization of Bacillus macerans cyclodextrin glycosyltransferase
366.
Impact of anionic substitutions on apatite structure and properties
367.
Impact of component losses on the voltage boost properties and efficiency of the QZS-converter family
368.
Impact of cracks to the hygrothermal properties of CLT water vapour resistance and air permeability
369.
Impact of growth-synthesis conditions on Cu2Zn1-xCdxSnS4 monograin material properties
370.
Impact of high energy milled activation on the thermal properties of Bulgarian and Estonian natural apatites
371.
Impact of Li and K co-doping on the optoelectronic properties of CZTS monograin powder
372.
Impact of the selenisation temperature on the structural and optical properties of CZTSe absorbers
373.
In memoriam : Investigation of the physical properties of oil shale of the Estonian deposit
374.
Influence of annealing in H2 atmosphere on the electrical properties of thin film CdS
375.
Influence of aqueous solutions of organic substances on structure and properties of pinewood
376.
Influence of binder composition and microhardness on wear properties of light weight composites
377.
Influence of compositional deviations on the properties of Cu2ZnSnSe4 monograin powders
378.
Influence of conductive polymer deposition on photovoltaic properties of prospective inorganic photoabsorber CuInS2 in solar cell
379.
Influence of copper and oxygen on the optoelectronic properties of chlorine doped CdTe fhin films
380.
Influence of copper and oxygen on the optoelectronic properties of chlorine doped CdTe thin films
381.
Influence of Cu2S, SnS and Cu2ZnSnSe4 on optical properties of Cu2ZnSnS4
382.
Influence of gelation temperature on the properties of sol-gel-derived calcium hydroxyapatite ceramics
383.
Influence of interior layer properties to moisture dry-out of CLT walls
384.
Influence of Na doping on opto-electrical properties of CdTe:Cl
385.
Influence of non-stoichiometry on some electrical properties and structure of barium titanate for PTC thermistors
386.
Influence of particles properties on the collision of solid particles with hardmetal and cermet
387.
Influence of point defects on optoelectronic properties of II-IV semiconductors
388.
Influence of production on hemp concrete hygrothermal properties : sorption, water vapour permeability and water absorption
389.
Influence of SPD on structure and properties of copper
390.
Influence of sulphur dioxide and hydrogen chloride on properties of oil shale ash
391.
Influence of technological conditions on the properties of CBD CdS layers
392.
Influence of the copper content on the optical properties of CZTSe thin films
393.
Influence of the interface on the photoluminescence properties in ZnO carbon-based nanohybrids
394.
Influence of the secondary thermal annealing on the properties of CdTe/CdS:CdCl2:O2 structure
395.
Influence of the SPD processing features on the nanostructure and properties of a pure niobium
396.
Influence of the technology to the properties of gas-flame coatings
397.
Influence of vapour transport deposition conditions on properties of SB2SE3 thin film absorber and solar cells
398.
Intermediate and low radiofrequency electromagnetic field transmission properties in case of common building materials [Online resource]
399.
Internal scales and dispersive properties of microstructured materials
400.
Interpolating generalized Shannon sampling operators, their norms and approximation properties
401.
Interpolating generalized Shannon sampling operators, their norms and approximation properties [Electronic resource]
402.
Investigation of electrical properties of cadmium sulfide thin films
403.
Investigation of physical properties of oil shale of Estonian deposits
404.
Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatings
405.
Investigation of some properties of brush-plated gold and silver galvanic coatings
406.
Investigation of the photodynamic and antineoplastic properties of lonidamine
407.
Investigation of the structural, optical and electrical properties of Cu3BiS3 semiconducting thin films
408.
Investigation of the structure, composition and sorption properties of Alder (Alnus) wood
409.
Investigations of structure and tribological properties of the lightweight c-BN-based composites
410.
Isolated Potato Virus A coat protein possesses unusual properties and forms different short virus-like particles
411.
Lie algebras with given properties of subalgebras and elements
412.
Magnetic properties of functional oxides = Funktsionaalsete oksiidide magnetilised omadused
413.
Magnetic properties of reduced Dy NdFeB permanent magnets and their usage in electrical machines
414.
Maintenance manual : necessary toolkit when managing properties
415.
Material properties for 3D printing electrical machines
416.
Material properties of clay and lime based plaster for sturctural design
417.
Material properties of clay and lime plaster for structural fire design
418.
Materials properties of magnesium and calcium hydroxides from first-principles calculations
419.
Mehanical properties of PVD coatings on TiC-based cermets
420.
Metal-binding properties of unique Cys-deficient mammalian metallothionein - sheep MT-3
421.
Methods of improving of carbide steel properties
422.
Microorganism polysaccharides for purposeful change of immunochemical properties of immobilized enzymes and other bioregulatory proteins
423.
Microstructural characteristics and properties of reactive sintered TiC-based cermets
424.
Microstructure and properties development of copper during severe plastic deformation
425.
Microstructure and properties development of copper during severe plastic deformation [Electronic resource]
426.
Microstructure and properties of reactive sintered TiC-based cermets
427.
Microstructure and properties of UFG metals and alloys
428.
Microstructure and properties that change during hard cyclic visco-plastic deformation of bulk high purity niobium
429.
Microstructure and thermal properties of quasi-equal rare earth substitution Y0.5Gd0.5Ba2Cu3O6.94 superconductor
430.
Microstructure, properties and atomic level strain in severely deformed rare metal niobium
431.
Microwave reflectance and transmittance properties of conductive composite materials
432.
Microwave reflection and absorption properties of wet snow
433.
Microwave reflection properties of building materials in the working environment
434.
Model checking emerging behavior properties of robot swarms
435.
Model checking of emergent behaviour properties of robot swarms
436.
Modelling and testing of the properties of recovered composite material
437.
Modification of conductive properties and processability of polyparaphenylene, polypyrrole and polyaniline
438.
Modification of low - density polyethylene : structure and properties
439.
Modification of the optoelectronic properties of Cu2CdSnS4 through low-temperature annealing
440.
Molecular mass characteristics and hydrodynamic and conformational properties of hyperbranched poly-L-lysines
441.
Molecular properties of comb-shaped maleimide copolymers in dilute solutions : effect of alkyl side chains
442.
Nanostructure and properties study of advanced high purity rare metals
443.
Nondestructive characterization of materials with variable properties
444.
Normalisation of vehicle acoustic properties and it units in Russia
445.
Numerical investigation of properties of small size Axial Flux Permanent Magnet Motors
446.
Of different approaches of calculations of the surface properties of wood
447.
Oil shale CFBC ash cementation properties in ash fields
448.
Oil shale waste rock aggregate properties which are depending on content of oil shale
449.
On approximation properties of generalized Kantorovich-type sampling operators
450.
On approximation properties of Kantorovich-type sampling operators
451.
On approximation properties of sampling operators defined by dilated kernels [Electronic resource]
452.
On approximation properties of Shannon sampling operators with averaged and dilated bandlimited kernels
453.
On approximation properties of Shannonn sampling operators with bandlimited kernels
454.
On approximation properties of the generalized sampling operators
455.
On approximation properties of the generalized Shannon sampling operators generated by band-limited kernels
456.
On dispersion properties of surface motions in the Gulf of Finland
457.
On information properties of covers
458.
On nonlinear waves in media with complex properties
459.
On some norms and approximation properties of Kantorovich-type sampling operators
460.
On the influence of material properties on the wave propagation in Mindlin-type microstructured solids
461.
On the properties of forward and backward shifts of vector fields
462.
On the statistical properties of tomlinson filters
463.
On the vibro-acoustic properties of a rotating perforated railway wheel
464.
Optical and photosensitive properties of lamellar nanocomposites obtained by Cd intercalation of GaTe
465.
Optical and structural properties of orthorhombic and tetragonal polymorphs of Cu2CdGeSe4
466.
Optical and structural properties of TiO2 thin films by chemical spray
467.
Optical properties of GaTe-ZnTe nanolamellae composite
468.
Optical properties of high quality Cu2ZnSnSe4 thin films
469.
Optical properties of multinary semiconductor compounds for photovoltaic applications = Päikesepatareides kasutatavate mitmikpooljuhtühendite optilised omadused
470.
Optical properties of sprayed ZnO thin films
471.
Optoelectronic properties of CdSe - CdTe solid solutions
472.
Optoelectronic properties of CdTe thin films
473.
Optoelectronic properties of chlorine and oxygen doped CdTe thin films
474.
Organic and carbon aerogels containing rare-earth metals : their properties and application as catalysts
475.
Oxime functionalized surfactants in pH-responsive mixed micellar assemblies : physicochemical properties and esterolytic reactivity
476.
Oxygen barrier properties of Al<sub>2</sub>O<sub>3</sub>- and TiO<sub>2</sub>-coated LDPE films
477.
Particle size and proportion influence to impact properties of particulate polymer composite
478.
Pharmacological properties of MM-706, a new prostacyclin derivate
479.
Phase evolution, microstructure characteristics and properties of Cr3C2-Ni cermets prepared by reactive sintering
480.
Phases properties of SC superalloy measured by nanoindentation
481.
Photoelectric and photoluminescence properties of CdTe-GaTe composite
482.
Photoelectrical properties of In(OH)xSy/PbS(O) structures deposited by SILAR on TiO2
483.
Photoluminescence properties of Ge-implanted CuGaSe2 crystals
484.
Photoluminescence properties of polycrystalline AgGaTe2
485.
Photoluminescence properties of stoichiometric CuInSe2 crystals
486.
Photoluminescence properties of Z-bands in CdTe
487.
Physical and chemical properties of Estonian balneological peat
488.
Physical and chemical properties of ozone [Electronic resource]
489.
Physical and chemical properties of shale oil
490.
Physical and thermodynamic properties of kukersite pyrolysis shale oil : literature overview
491.
Physical properties as a tool for quality assessment in fruit processing
492.
Physical properties of 7-Methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (mTBD)
493.
Physical properties of Estonian shale oils
494.
Physical properties of sea buckthorn fruits
495.
Physicochemical properties and esterolytic reactivity of oxime functionalized surfactants in pH-responsive mixed micellar system
496.
Potyvirus Potato Virus A coat protein posses unusual properties and forms short virus-like particles
497.
Pre- and posttreatment effect to the surface properties of thin hard coatings
498.
Predicting fuel properties from infrared spectra = Kütuse omaduste hindamine infrapunaspektrilt
499.
predictive approach towards using PC-SAFT for modeling the properties of shale oil
500.
Preliminary analysis of soft magnetic material properties for additive manufacturing of electrical machines
501.
Preparation and properties of CdTe films on Mo/glass substrates
502.
Preparation and thermoelectric properties of Bi2Te3-Sb2Te3 alloys
503.
Processing and properties of bulk ultrafine-grained pure niobium
504.
Processing and properties of zirconia toughened WC-based cermets
505.
Processing and tribological properties of chromium carbide based cermets
506.
Processing and tribological properties of Cr3C2
507.
Production and properties of microcrystalline cellulose (MCC)
508.
Properties and Application of DFK-Adhesives
509.
Properties and chemical composition of pinewood
510.
Properties and environmental impact of oil shale ash landfills
511.
Properties and performance of hard coatings on tool steels under cyclic indentation
512.
Properties and Use of Alkylresorcinol Adhesives in the Manufacture of Wooden Carrying Constructions
513.
Properties and use of industrial needlepunched textiles based on short flax fibres
514.
Properties development of ultrafine-grained copper under hard cyclic viscoplastic deformation
515.
Properties of chitin extracted from Estonian mushrooms
516.
Properties of clay plaster for the fire design of timber structures
517.
Properties of cocksfoot mottle sobemovirus (CfMV) proteins
518.
Properties of cocksfoot mottle virus proteins
519.
Properties of CuInS2 thin films prepared by spray pyrolysis from copper rich solution
520.
Properties of Cu-Sb-Se thin films deposited by magnetron co-sputtering for solar cell applications
521.
Properties of CuSbSe2 thin film solar cell absorbers deposited by magnetron co-sputtering
522.
Properties of dimension (facing) stone from Estonian dolostone
523.
Properties of Estonian stock market
524.
Properties of flax fiber reinforced polyethylene films
525.
Properties of flax fiber-reinforced polyethylene films
526.
Properties of fluidized bed burnt oil shale ashes
527.
Properties of frost-retted hemp fibres for the reinforcement of composites
528.
Properties of hardmetals influencing their adhesive wear in sheet metal blanking
529.
Properties of hardmetals influencing their durability
530.
Properties of humic substances from the Baltic Sea and Lake Ermistu mud
531.
Properties of integration formula based on extended Fourier series
532.
Properties of kukersite shale oil
533.
Properties of limestone from Selgase deposit
534.
Properties of NiO thin film deposited spray pyrolysis
535.
Properties of NiO thin films prepared by chemical spray pyrolysis
536.
Properties of particleboards prepared with modified urea binders
537.
Properties of retted hemp fibres for reinforcement of composites
538.
Properties of steel powder prepared from bearing steel turnings
539.
Properties of technical textiles based on low-melting PET and short flax fibre
540.
Properties of the CdCl2 air-annealed CSS CdTe thin films
541.
Properties of the CdCl2:O2 treated CSS CdTe thin films
542.
Properties of the CuInS2 surface and the effect of organic layers
543.
Properties of thermal probes with heat pipe cooling system
544.
Properties of TiO2 films prepared by spray pyrolysis method
545.
Properties of TiO2 films prepared by the spray pyrolysis method
546.
Properties of VPg and coat protein of sobemoviruses = Sobemoviiruste VPg ja kattevalgu omadused
547.
Purification, properties and use of cholesterol esterase from Pseudomonas mendocina 3121
548.
Purification, properties and use of glucose oxidase from Aspergillus niger 12
549.
Quantitative structure-activity relationships of environmentally relevant properties
550.
Rapid subunit exchange in dimeric lipoprotein lipase and properties of the inactive monomer
551.
Recycled hardmetal-based powder composite coatings : optimisation of composition, structure and properties
552.
Reflection and transmission properties of common construction materials at 2.4 GHz frequency
553.
Relationship between structure and properties of urea-formaldehyde resins
554.
Relationship between the chemical structure of urea-formaldehyde resins and properties of particleboards
555.
Reprocessing technology of composite plastic scrap and properties of materials from recycled plastics
556.
Reversibility of CdS film properties depending on the nature of annealing gas
557.
Review of - SiC wide-bandgap heterostructure properties as an alternate semiconductor material
558.
Rheological properties of gels formed with furcellaran and globular proteins bovine albumin and [beeta]-lactoglobulin
559.
Rheological properties of MWCNT-doped titanium-oxo-alkoxide gel materials for fiber drawing
560.
RNA binding properties of potato A potyvirus encoded structural and non-structural proteins
561.
Selective antibiofilm properties and biocompatibility of nano-ZnO and nano-ZnO/Ag coated surfaces
562.
Silver nanoparticles : synthesis, properties, and applications
563.
Simulation of RF noise propagation to relativistic electron beam properties in a linear accelerator
564.
Sintering technology and properties of TiC-base cermets
565.
Some comparative properties of diffusion-welded contacts to 6H and 4H silicon carbide
566.
Some of comparative properties of diffusion welded contacts to 6H- and 4H-silicon carbide
567.
Spatial variation of statistical properties of extreme water levels along the eastern Baltic Sea
568.
Spatial variation of statistical properties of extreme water levels along the eastern Baltic Sea coast
569.
Specific statistical properties of the strength of links and nodes of the Estonian network of payments
570.
Spectral and temporal properties of Estonian palatalization
571.
Spectral properties of the phase-locked harmonic analyzer
572.
Spectroscopic and phase-stabilisation properties of pure and rare-earth ions activated ZrO2 and HfO2
573.
SSBDD model : advantageous properties and efficient simulation algorithms
574.
Strain relaxation mechanism in the Si-SiO2 system and its influence on the interface properties
575.
Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layers
576.
Structural and electrical properties of P-type NiO thin films deposited by spray pyrolysis
577.
Structural and optical properties of cadmium sulfide thin films modified by hydrogen annealing
578.
Structural and optical properties of CuInS2 thin films prepared by spray pyrolysis
579.
Structural and optical properties of sprayed CuInS2 films
580.
Structural and optical properties of ZnTe thin films
581.
Structural and optoelectronic properties of CdCl2 activated CdTe thin films modified by multiple thermal annealing
582.
Structural properties of apatites from Finland studied by FTIR spectroscopy
583.
Structure and properties evolution of superalloy in zone of uniform deformation by electroupsetting
584.
Structure and properties evolution of superalloy in zone of uniform deformation by electroupsetting [Electronic resource]
585.
Structure and properties of apatites
586.
Structure and properties of boron nitride based composite produced by SHS method
587.
Structure and properties of commercial urea-formaldehyde resins
588.
Structure and properties of oil-shale portland cement concrete
589.
Studies of oil shale properties variation in El Lajjun (Jordan) borehole
590.
Studies of structural and morphological properties of cuprate conductive ceramics after electrochemical treatment in alkaline electrolyte
591.
Study of properties of HVOF-sprayed coatings
592.
Study of technology and properties of PVD TiN coatings
593.
Study of the optical properties of Sb2(Se1-xSx)3 (x = 0–1) solid solutions
594.
Study of the properties of TiO2 thin films deposited by ultrasonic spray pyrolysis [Online resource]
595.
Study of the structure and optoelectronic properties of Cu2Ge(SexS1-x)3 microcrystalline powders
596.
Study of thermal properties of synthetic resins based on oil shale alkylresorcines
597.
Study on physico-chemical properties and some bioactive compounds of sea buckthorn (Hippophae rhamnoides L.)
598.
Study on the properties of TiO2 thin films deposited by ultrasonic spray pyrolysis
599.
Studying of internal and rheological properties of polyethylene-oil shale ash composites
600.
Superbasic system MNH(CH2)2NH2/H2N(CH2)2NH2, properties and using in organic synthesis
601.
Surface properties of birch false heartwood [Online resource]
602.
Surface properties of sprayed and electrodeposited ZnO rod layers
603.
Surface wetting properties of electrodeposited and sprayed ZnO nanorod layers [Online resource]
604.
Synergistic effects of fluorine and carbonate on Cd2+ binding properties of apatites
605.
Synthesis and electrical properties of potassium substituted hydrosodalites
606.
Synthesis and hydrodynamic and conformation properties of star-shaped polystyrene with calix[8]arene core
607.
Synthesis and optical properties of Ga2O3 nanowires grown on GaS substrate
608.
Synthesis and properties of CaS:Eu luminophors
609.
Synthesis and properties of oxa[4]calixarene [Online resource]
610.
Synthesis and properties of urea resins containing triazinone rings
611.
Synthesis and structural and conformational properties of hybrid polymers of styrene with perfluorinated compounds of germanium
612.
Synthesis and superconducting properties of Nd0.33Eu0.08Gd0.58Ba2Cu3Oz materials
613.
Synthesis of superhard lightweight composites and improvement of their properties via chemical processing
614.
Zn(II) ions co-secreted with insulin suppress inherent amyloidogenic properties of monomeric insulin
615.
ZnCdSeTe semiconductor compounds : preparation and properties
616.
Tailoring composition and properties of CuInSe2 materials for solar cell application
617.
Tailoring II/VI semiconductor materials properties to photochemical requirements
618.
Tailoring II/VI semiconductor materials properties to photoelectrochemical requirements
619.
Tailoring of magnetic properties of MnAl thin films by protons irradiation
620.
Tailoring the composition and properties of CuInSe2 materials for solar cell application
621.
Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion
622.
Temperature and pressure dependence of density of a shale oil and derived thermodynamic properties
623.
Temperature dependent current transport properties in Cu<sub>2</sub>ZnSnS<sub>4</sub> solar cells
624.
Temperature dependent electrical properties of kesterite monograin layer solar cells = Kesteriitsete monoterakihiliste päikesepatareide elektriliste omaduste temperatuursõltuvused
625.
Testrig for characterization of turbo-compressor acoustic properties [Electronic resource]
626.
Textural properties of estagar gels in the presence of potassium and calcium cations and saccharose
627.
Textural properties of furcellaran gels with milk and its components
628.
The adhesive properties of interlining materials
629.
The adhesive properties of interlinings
630.
The adhesive properties of interlinings [Electronic resource]
631.
The analyzes of limestone and dolostone aggregate properties for highway constructions
632.
The Baltic Basin : structure, properties of reservoir rocks, and capacity for geological storage of CO2
633.
The changes in the optical properties of Ehrlich carcinoma cells treated with hematoporphyrin derivative and light
634.
The complex method for investigation of thermophysical properties of kraft recovery boiler fireside deposits
635.
The composition and properties of ash in the context of the modernisation of oil shale industry
636.
The copper structure and properties evolution in zone of severe plastic deformation
637.
The effect of growth temperature and spraying rate on the properties of ZnO:In films
638.
The effect of ionic liquid on the properties of electrospun polyacrylonitrile membranes [Online resource]
639.
The effect of laser fluences on the structural and optoelectronic properties of Zn(O,Se) films
640.
The effect of sodium doping to CuInSe2 monograin powder properties
641.
The effect of surface pre-treatment and coating post-treatment to the properties of TiN coatings
642.
The effect of wood flour fraction size on the properties of wood-plastic composites
643.
The effects of impact variables and abrasive particle properties on the erosion of cermets
644.
The effects of impact variables and abrasive particle properties on the erosion of cermets [Electronic resource]
645.
The electrical and optical properties of kesterites
646.
The electrophoretical spectra of storage proteins and baking properties of rye, triticale and wheat
647.
The formation of structure and change of properties during heat treatment of boron carbide cermets
648.
The formation of structure and change of properties during heat treatment of boron carbide composites
649.
The formation of wear resistant properties of boron carbide cermet
650.
The influence of alumina and zirconia coats on the tribological properties of alumina nanofibers
651.
The influence of different packaging materials and atmospheric conditions on the properties of pork rinds
652.
The influence of doping with donor type impurities on the properties of CuInSe2
653.
The influence of oil shale ashes to the sedimentation properties of sludges in biotreatment
654.
The influence of reactive sintering parameters on the structure and properties of Cr3C2-Ni cermets
655.
The influence of refractory composition in binder phase on wear properties of boron carbide aluminium composites
656.
The influence of Sinter/HIP sintering on the properties of chromium carbide based cermets
657.
The influence of target surface alterations on pulsed laser deposited YBa2Cu3O7-x film properties
658.
The investigation of growth promoting/inhibiting properties of microalgal extracts on commercially valuable microorganisms
659.
The investigation of structure and properties of TiAl-Nb alloy
660.
The isolation and properties of phosphate solubilizing microorganisms
661.
The microstructure and properties of fine-grained cermets
662.
The optoelectonic properties of Sb2 (Se1-x, Sx)3 (x= 0 - 1) solid solutions
663.
The properties of different barrier coatings
664.
The properties of the adhesive bond formed by ozonized LDPE melt
665.
The resources and properties of Estonian balneological peat
666.
The role of Cl in the chemical bath on the properties of CdS thin films
667.
The role of structural properties on deep defect states in Cu2ZnSnS4 studied by photoluminescence spectroscopy
668.
The structure and magnetic properties of Co films on Ni3Al(0 0 1)
669.
The structure and properties forming in boron carbide aluminium composites during processing
670.
The structure and properties of recycled hardmetals
671.
The study of properties of aerogels derived from oil shale phenols
672.
The study of thermophysical properties of boiler furnace deposits
673.
The synthesis and investigation of physicochemical properties of polyaniline
674.
The technology and properties of sprayed coatings
675.
Thermal and rheological properties of composites based on poly(lactic acid) and cellulose derivatives
676.
Thermal annealing effect on structural and electrical properties of chemical bath-deposited CdS films
677.
Thermal properties of calcium-aluminate based materials
678.
Thermal properties of modified polyethylene
679.
Thermodynamic and transport properties of liquid products from oil shale pyrolysis
680.
Thermodynamics of adsorption - an expression of properties of solid materials
681.
Thermophysical properties and thermal shock resistance of chromium carbide based cermets
682.
Thermo-physical properties and thermal shock resistance of chromium carbide based cermets
683.
Thermophysical properties of ash deposit on boiler heat exchange surfaces
684.
Time-dependent properties of a viscous vortex ring
685.
Trend for production of (CaOH)2 and PCC with determined properties
686.
Tribological properties of nanocrystalline diamond coating at high temperature sliding conductions [Online resource]
687.
Tribological properties of PVD coatings with lubricating films
688.
Tribological properties of selective laser melted Al12Si alloy
689.
Tribological properties of the Cr3C2-Ni metal-matrix composites
690.
Tribological properties of the Cr3C2-Ni metal-matrix composites [Electronic resource]
691.
Uncertainty estimation of damage factor of materials properties under the plasma influence
692.
Urea-formaldehyde resins for wood agglomerisation : synthesis, structure and properties
693.
Using of small punch test for determination of tensile properties for power plant steels
694.
Vaporization related properties of pyrolysis oils/tars from kukersite oil shale
695.
Variability in the properties of long waves generated by high-speed ferries in Tallinn Bay
696.
Variability in the properties of wakes generated by high-speed ferries
697.
Water vapour transmission properties of linseed oil paint
698.
Wear properties of duplex treated surfaces
699.
Voltage withstand properties of the insulation of different types of medium voltage covered overhead line conductors
700.
Yields and properties of thermal bitumen obtained from combustible shale
701.
Puitkonstruktsioonid : ehituspuit ja liimpuit. Mõnede füüsikaliste ja mehaaniliste omaduste määramine = Timber stuctures : structural timber and glued laminated timber. Determination of some physical and mechanical prope
võtmesõna
95
1.
interlayer mechanical properties
2.
mechanical properties
3.
mechanical properties C
4.
mechanical properties of particle reinforced material
5.
microstructure and mechanical properties
6.
modification of mechanical properties
7.
mechanical and tribological properties
8.
biomechanical properties of arteries
9.
micromechanical properties
10.
electro-chemo-mechanical characterization (ECMD)
11.
magneto-mechanical
12.
magneto-mechanical effects
13.
mechanical activation
14.
mechanical alloying
15.
mechanical and thermal effects
16.
mechanical behaviour
17.
mechanical characteristics
18.
mechanical collection
19.
mechanical engineering
20.
mechanical engineering and energy technology
21.
mechanical engineering design
22.
mechanical nanostructuring
23.
mechanical oil recovery
24.
mechanical property
25.
mechanical recycling
26.
mechanical simulations
27.
mechanical stability
28.
mechanical strength
29.
mechanical stress
30.
mechanical testing
31.
mechanical wave
32.
mechanical waves
33.
mechanical waves in axoplasm
34.
mechanical waves in biomembrane
35.
mechanical ventilation
36.
mechanical ventilation system
37.
mechanical vibrations
38.
optimization of the mechanical design
39.
thermo-mechanical simulations
40.
thermo‐mechanical simulations
41.
thermo-mechanical treatment
42.
acoustic properties
43.
air permeability properties
44.
antifungal properties
45.
apparent optical properties
46.
binding properties
47.
biocidal properties
48.
boundary properties
49.
bulk properties
50.
cadmium chloride treatment structural properties
51.
chemical properties
52.
D. optical properties
53.
dielectric properties
54.
electrical properties
55.
electrical properties and parameters
56.
fatigue properties
57.
fluorescent properties
58.
functional properties
59.
hydraulic properties
60.
hygroscopic properties
61.
inherent optical properties
62.
local properties of timber
63.
magnetic properties
64.
Material Properties
65.
mechanism of changes in CdS properties
66.
Optical properties
67.
optoelectronic properties
68.
peat physico-chemical properties
69.
photoelectric properties
70.
photoluminescence properties
71.
physical properties
72.
physicochemical and electrochemical properties
73.
physicochemical properties
74.
physio-chemical properties
75.
pozzolanic properties
76.
properties
77.
properties of SSBDDs
78.
rock engineering properties
79.
rock properties
80.
soil physical properties
81.
solution properties
82.
spectral properties
83.
Structural properties
84.
surface properties
85.
switching properties
86.
tensile properties
87.
thermal properties
88.
thermodynamic properties
89.
thermoelectric properties
90.
thermophysical properties
91.
tribological properties
92.
uremic solute removal properties
93.
water absorption properties
94.
wear properties
95.
wool felt properties
allikas
33
1.
Conference Proceedings : 2nd International Conference SSTT : Determination of mechanical properties of materials by small punch and other miniature testing techniques
2.
New Materials and Technologies in Mechanical Engineering : International Scientific Conference "New Materials and Technologies in Mechanical Engineering" (NMTME 2019)
3.
4th Mechanical and Manufacturing Engineering : selected, peer reviewed papers from the 4th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), December 17-18, 2013, Bangi-Putrajaya, Malaysia
4.
ASME 2018 International Mechanical Engineering Congress and Exposition : Pittsburgh, Pennsylvania, USA, November 9–15, 2018
5.
ASME 2018 International Mechanical Engineering Congress and Exposition, Pittsburgh, Pennsylvania, USA, November 9–15, 2018
6.
ASME 2019 International Mechanical Engineering Congress and Exposition : conference proceedings
7.
ASME 2021 International Mechanical Engineering Congress and Exposition
8.
ASME 2022 International Mechanical Engineering Congress and Exposition
9.
Evolutions in mechanical engineering
10.
International journal of automotive and mechanical engineering
11.
International journal of mechanical engineering and technology
12.
International journal of mechanical sciences
13.
International review of mechanical engineering
14.
International review of mechanical engineering (IREME)
15.
Journal of the Mechanical Behavior of Biomedical Materials
16.
Mechanical design and power engineering
17.
Mechanical systems and signal processing
18.
Periodica polytechnica. Mechanical engineering
19.
Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition
20.
Proceedings of the full papers of 13th international conference on Mechanical Engineering 2010 : Bratislava, October 2010
21.
Proceedings of the institution of mechanical engineers part L Journal of Materials Design and Applications
22.
Proceedings of the institution of mechanical engineers part M-journal of engineering for the maritime environment
23.
Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials : Design and Applications
24.
Conference: Progress in Computing of Physicochemical Properties : Warszawa, Poland, 18-20 Nov. 1999
25.
ECTP2014 - 20th European Conference on Thermophysical Properties : Porto, Portugal, August 31st-September 4th 2014 : abstracts
26.
International journal of microstructure and materials properties
27.
Materials for potential EMI shielding applications : processing, properties and current trends
28.
Materials science and engineering : A - structural materials: properties, microstructure and processing
29.
Milk proteins : structure and functional properties : 11-12 November, 1996, Lund, Sweden : abstract book
30.
Nano-architectured and nanostructured materials : fabrication, control and properties
31.
NorFa Workshop : Milk Proteins, Structure and Functional Properties, 28-30.11.1998, Naantali, Finland : abstracts
32.
Surface topography : metrology and properties
33.
19th European Conference on Thermophysical Properties : Thessaloniki, Greece, August 28-September 1
kirjastus/väljaandja
10
1.
Mechanical Engineering Publications, for the Institution of Mechanical Engineers
2.
American Society of Mechanical Engineers
3.
American Society of Mechanical Engineers (ASME)
4.
Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
5.
Institution of Mechanical Engineers
6.
Mechanical Engineering Department, Auburn University
7.
Scientific society of mechanical engineers
8.
Scientific-technical Union of Mechanical Engineering
9.
Scientific-technical Union of Mechanical Engineering "Industry 4.0"
10.
The Japan Society of Mechanical Engineers
seeria-sari
2
1.
Advances in mechatronics and mechanical engineering (AMME)
2.
Research report / University of Oulu, Department of Mechanical Engineering, ISSN 0357-0282 ; n:o 97
märksõna
1
1.
mechanical properties