Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
surface currents (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
8
Vaata veel..
(3/444)
Ekspordi
ekspordi kõik päringu tulemused
(8)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel ajakirjas
A comparison of the motions of surface drifters with offshore wind properties in the Gulf of Finland, the Baltic Sea
Delpeche-Ellmann, Nicole Camille
;
Torsvik, Tomas
;
Soomere, Tarmo
Estuarine, coastal and shelf science
2016
/
p. 154-164 : ill
http://dx.doi.org/10.1016/j.ecss.2016.02.009
artikkel ajakirjas
2
raamat
Baltic Sea Remote Sensing
2021
https://www.mdpi.com/journal/remotesensing/special_issues/Baltic_RS#info
raamat
3
artikkel ajakirjas
Observations of surface drift and effects induced by wind and surface waves in the Baltic Sea for the period 2011–2018
Delpeche-Ellmann, Nicole Camille
;
Giudici, Andrea
;
Rätsep, Margus
;
Soomere, Tarmo
Estuarine, coastal and shelf science
2021
/
art. 107071, 13 p. : ill., map
https://doi.org/10.1016/j.ecss.2020.107071
artikkel ajakirjas
4
artikkel ajakirjas
Spatial pattern of current-driven hits to the nearshore from a major marine fairway in the Gulf of Finland
Viikmäe, Bert
;
Soomere, Tarmo
Journal of marine systems
2014
/
p. 106-117 : ill
artikkel ajakirjas
5
artikkel ajakirjas
Temporal scales for nearshore hits of current-driven pollution in the Gulf of Finland
Viikmäe, Bert
;
Soomere, Tarmo
Marine pollution bulletin
2016
/
p. 77-86 : ill
http://dx.doi.org/10.1016/j.marpolbul.2016.03.025
artikkel ajakirjas
6
artikkel kogumikus
Temporal scales for nearshore hits of current-driven pollution in the Gulf of Finland
Viikmäe, Bert
28th Nordic Seminar on Computational Mechanics, 22-23 October, Tallinn, 2015 : proceedings of the NSCM28
2015
/
p. 187-190
artikkel kogumikus
7
artikkel ajakirjas
Tracks of surface drifters from a major fairway to marine protected areas in the Gulf of Finland
Delpeche-Ellmann, Nicole Camille
;
Torsvik, Tomas
;
Soomere, Tarmo
Proceedings of the Estonian Academy of Sciences
2015
/
p. 226-233 : ill
artikkel ajakirjas
8
artikkel ajakirjas
Verification of modelled locations of coastal areas exposed to current-driven pollution in the Gulf of Finland by using surface drifters
Viikmäe, Bert
;
Torsvik, Tomas
;
Soomere, Tarmo
Proceedings of the Estonian Academy of Sciences
2015
/
p. 405-416 : ill
artikkel ajakirjas
Kirjeid leitud 8, kuvan
1 - 8
pealkiri
300
1.
Investigation of surface currents near Cape Kolka in the Gulf of Riga by use of surface drifters
2.
An assessment and quantification of sea surface currents using satellite altimetry, in-situ and hydrodynamic model data for the Gulf of Finland, Baltic Sea
3.
Generation of large pollution patches via collisions of sticky floating parcels driven by wind and surface currents
4.
On the finite-time compressibility of the surface currents in the Gulf of Finland, the Baltic Sea
5.
Optimising fairways in the Gulf of Finland using patterns of surface currents = Laevateede optimeerimine Soome lahel pinnahoovuste mustrite põhjal
6.
The impact of surface currents and sea level on the wave field evolution during St. Jude storm in the eastern Baltic Sea
7.
Compressibility of surface flows under the combined effect of currents and winds
8.
Patchiness of the sea surface under the combined effects of winds and currents
9.
Comparison of satellite sea surface temperature with in situ surface layer temperature
10.
The influence of surface-active contaminants to oxygen mass transfer through gas-liquid surface
11.
Thermomechanical surface instability at the origin of surface fissure patterns on heated circular MDF samples
12.
Classical electrodynamics, charge distributions of currents and the metal transistor
13.
Computation of MOS transistor channel currents using Gear methods in SPICE
14.
Currents
15.
Currents in the Suur Strait between the Gulf of Riga and the Baltic Proper
16.
Currents of the Gulf of Finland: instrumental measurements and numerical hydrodynamic modeling
17.
Dense gravity currents in rotating, up-sloping and converging channel
18.
Diagnostic possibilities of induction motor bearing currents
19.
Dynamics of dense gravity currents and mixing in an up-sloping and converging vee-shaped channel
20.
Experimental and analytical investigation of dense gravity currents in a rotating, up-sloping and converging channel
21.
Gravity currents in rotating, topographically-controlled channels
22.
Gravity currents in rotating, wedge-shaped, adverse channels
23.
Harmonic currents and voltages in industrial LV networks - case studies
24.
Harmonic currents and voltages in LV networks of Estonia : measurement results, case studies
25.
Harmonic voltages and currents in LV industrial power systems, shunt capacitors and additional power losses
26.
Implementation and analysis of rolling bearing faults caused by shaft currents
27.
Induction motor bearing currents - causes and damages
28.
Leakage currents in 4H-SiC JBS diodes
29.
Moufang transformations and Noether currents
30.
Note on Moufang-Noether currents
31.
Observed thermohaline fields and low-frequency currents in the Narva Bay
32.
On currents and symmetries associated with Mal'tsev algebras
33.
Polarization and depolarization currents in kaolin
34.
Possibilities of decreasing induction motor bearing currents
35.
Power factor correction of three-phase diode rectifiers using optimum ripple currents injection [Electronic resource]
36.
Reconstruction of currents in the Ordovician-Silurian Baltic Basin
37.
Resonant converter as a transformer for varying the ratio between input and output currents
38.
Short-circuit currents calculation algorithm in street lighting networks
39.
Short-circuit currents calculations in street lighting networks
40.
The BalticWay Project : the use of currents for environmental management of the Baltic Sea coasts
41.
The behaviour of dense gravity currents in a rotating channel with converging topography
42.
Variability of currents in the Suur Strait, Gulf of Riga
43.
Variability of low-frequency currents in the Gulf of Finland
44.
Wind forced currents over the shallow Naissaar Bank in the Gulf of Finland
45.
Wind-driven currents over the shallow Naissaare Bank in the Gulf of Finland
46.
Enhanced photocatalytic activity of ZnO nanorods by surface treatment with HAuCl4 : synergic effects through an electron scavenging, plasmon resonance and surface hydroxylation
47.
Observations of surface drift and effects induced by wind and surface waves in the Baltic Sea for the period 2011–2018
48.
Prostate specific antigen-imprinted film on SPR sensor surface by combining the microcontact imprinting method and the surface initiated photopolymerization
49.
Surface phase transformations, surface complexation and solubilities of hydroxyapatite in the absence/presence of Cd(II) and EDTA
50.
A high temperature corrosion resistance of boiler steels in the presence of chlorine-containing surface deposits
51.
A novel method for monitoring surface membrane trafficking on hippocampal acute slice preparation
52.
A study of the sea surface boundary layer dynamics
53.
A surface complexation and solubility study of hydroxyapatite in the presence of Cd(II) and EDTA
54.
Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlays
55.
Abrasive impact wear and surface fatigue wear behaviour of Fe–Cr–C PTA overlays
56.
Adhesion of zymomonas mobilis cell to glass surface
57.
AFM characterization of the surface morphology of the severe plastic deformed copper [Electronic resource]
58.
Airborne laser scanning derived sea surface height datasets in the Gulf of Finland (10.05.2018)
59.
Airborne laser scanning determination of sea surface heights [Electronic resource]
60.
An optimal control method for an autonomous surface vessel for environment monitoring and cargo transportation applications
61.
Analysis of oil shale high-selective mining with surface miner in Estonia
62.
Application of the Murakami approach for prediction of surface fatique of cemented carbides
63.
Applications of airborne laser scanning for determining marine geoid and surface waves properties
64.
Assimilation of observed sea surface temperature and salinity, using subregional EOF patterns from models
65.
Barotropic effects on surface layer on water exchange through horizontal channels with quadratic-shape cross-sections
66.
Baseline Surface Radiation Network (BSRN) : structure and data description (1992-2017)
67.
Bioreactivity, guttation and agents influencing surface tension of water emitted by actively growing indoor mould isolates
68.
Blast vibrations in oil shale surface mining
69.
Boiler surface cleaning from friable ash deposits by acoustic waves
70.
Boiling on porous surface
71.
Bulk and surface characterisation techniques of solar absorbers : general discussion
72.
Cartography of the Apollo 12 landing site from photogrammetric analysis of surface imagery
73.
Cemented carbides surface fatigue prediction using Murakami approach
74.
Cermets surface transformation under erosive and abrasive wear
75.
Characteristics of sub-surface chlorophyll maxima observed in the Gulf of Finland in July 2006
76.
Chemical analysis of bivalent trace metals in the surface layer of raised bogs
77.
Chemical changes of the surface of the weathered wood
78.
Chemistry at the surface New organic/mineral hybrid compounds: apatites as chiral ruthenium complexes support
79.
Coatings and surface engineering. Industry oriented research
80.
Comparison of entrance surface dose in patients undergoing spot film fluorography and conventional radiography
81.
Controlled nanocrystalline precipitation of hydroxyapatite on the surface of microfibrillated cellulose fibers
82.
Correlation between measured surface and endocardial electrical signals of heart
83.
Correlation between surface fatigue and microstructural defects of cemented carbides
84.
Correlation between surface fatigue and microstructural defects of cemented carbides : experimental validation
85.
Covalent modification of calcium hydroxyapatite surface by grafting phenyl phosphonate moities
86.
Covalent surface imprinting strategy of electrosynthesized PEDOT films for protein recognition
87.
Deposition of solid particles at streamlined surface in turbulent flow
88.
Depth induced breaking of wind generated surface gravity waves in Estonian coastal waters
89.
Design and testing of an universal autonomous surface vehicle
90.
Design of a new oil shale surface mine
91.
Design of new oil shale surface mine
92.
Determination of surface tension and contact angle for the porous substrates by meniscus shape analysis
93.
Determining regional sea surface topography by GNSS surveys on ice
94.
Determining sea surface heights using small footprint airborne laser scanning
95.
Development of a flexible, extendable, and low-cost control unit for surface drifters
96.
Development of a strategy for preparation of protein surface imprinted electrosynthesized conducting polymer thin films
97.
Development of a surface imprinting strategy based on a covalently immobilized protein
98.
Digital Object Memory integration into indirect surface roughness measurement in turning
99.
Dioxins and furans in surface sediment of NW Estonian coastal sea [Online resource]
100.
Double-curved surface forming process modeling
101.
Duplex TiN coating on stainless steel : an electrochemical and surface analysis study : doctoral thesis
102.
Duplex treatment of steel surface = Terase pinna duplekstöötlus
103.
Dynamics of phytoplankton pigments in water and surface sediments of a large shallow lake
104.
Ecotoxicity profiling of a library of 24 l-phenylalanine derived surface-active ionic liquids (SAILs)
105.
Effect cleaning procedure of Mo surface to the properties of MoSe2
106.
Effect of absorber surface modification on the optoelectronic properties of Cu2CdGeSe4 solar cells
107.
Effect of carbide phase and binder chemical composition on surface fatigue of carbide composites [Electronic resource]
108.
Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
109.
Effect of residual stresses on the surface fatigue of TiC-based carbide composites
110.
Effect of sintering method on surface fatigue of carbide composites
111.
Effect of steam activation on oil shale semi-coke surface properties
112.
Effect of surface irregularities in noise levels caused by air flowing
113.
Effect of the substrate surface on properties of RF sputtered magnetronantimony selenide (Sb2Se3) for thin-films
114.
Effects of surface with regular roughness on convective heat transfer
115.
Efficiency of convective heat surface : fouling and cleaning
116.
Electrochemical etching of copper indium diselenide surface
117.
Electrochemical methods to establish the surface roughness of solid surfaces
118.
Electro-deposited nano-Ni/reduced graphene oxide composite film of corrugated surface for high voltammetric sensitivity
119.
Electrosynthesized molecularly imprinted polymer films for surface acoustic wave detection of antibiotics
120.
Electrosynthesized surface-imprinted conducting polymer microrods for selective protein recognition
121.
Energy pile field simulation in large buildings: validation of surface boundary assumptions
122.
Enhancing the surface charge of BCTMP of aspen with supercritical CO2 treatment
123.
Environment friendly and materials saving surface technologies
124.
Estimation of buttons resistance to rock drilling using laboratory surface fatigue test
125.
Evaluating of sea surface heights from multi-mission satellite altimetry by utilizing hydrodynamic and geoid models
126.
Evolution of TiN coating surface roughness during physical vapor deposition on high speed steel substrate
127.
Examining Lagrangian surface transport during a coastal upwelling in the Gulf of Finland, Baltic Sea
128.
Experimental analysis of end mill axis inclination and its influence on 3D areal surface texture parameters
129.
Experimental estimation of solid surface free energy of different species of wood by meniscus shape analysis
130.
Experimental study of surface distortions in silicon carbide caused by diffusion welding
131.
Experimentally adjusted modelling and simulation technique for a catamaran autonomous surface vessel
132.
Exploring sea surface heights by using airborne laser scanning
133.
Extreme surface water and seawater levels in the administrative territory of Tallinn
134.
Finite element analysis wear simulation of a conical spinning contact considering surface topography
135.
Fouling and heat effectiveness of convective heat surface on high temperature helium flow
136.
Gas-phase photocatalytic and thermal oxidation of methyltertbutyl ether and tert-butyl alcohol at TiO2 surface
137.
Geoid profiles in the Baltic Sea determined using GPS and sea level surface
138.
Ground surface subsidence risk assessment by underground mining in Estonia
139.
Guidelines for surface and drainage water quality monitoring in agriculture dominated areas
140.
Heat surface fouling by graphite particles deposition from turbulent gas flow
141.
Heat transfer models for deposits on the inner surface of steam generator tubes
142.
Imaging Torfajökull's magmatic plumbing system with seismic interferometry and phase velocity surface wave tomography
143.
Impact deformations and stresses in target surface
144.
Implementation of surface EMG for rehabilitation studies
145.
Influence of pretreatment of substrate surface on residual stresses in different cold spray coatings
146.
Influence of surface morphology on the tribological behavior of diamond-like carbon coating
147.
Influence of surface roughness on the tribological behaviour of the PVD coatings
148.
Interaction of Chrysosporium merdarium with titanium oxide surface
149.
Interaction of fungus with titanium oxide surface
150.
Investigation of additional states in the silicon carbide surface after diffusion welding
151.
Investigation of surface morphology of Nd2Fe14B and Nd2Fe14B+DLC thin films
152.
Investigation of the surface fatigue of carbide composites and PVD hard coatings
153.
Iterative refinement of regional marine geoid models by using sea surface height and dynamic topography datasets
154.
Iterative refinement of regional marine geoid models using sea surface height and dynamic topography datasets
155.
Krowledge based system of the surface finishing processes
156.
Long surface wave dynamics along a convex bottom
157.
Macrophyte in the Estonian surface water biomonitoring system : Ph.D Thesis in Geography
158.
Measurement of spontaneous current-induced patch formation processes in the marine surface layer
159.
Measurement of surface energy at the adhesive/substrate interface
160.
Measurement uncertainty of surface contour with complicated form
161.
Metal oxide nanoparticles could enter into the cells modified by surface charge and Ph
162.
Micropatterned surface imprinted PEDOT films for selective protein recognition
163.
Microscopic characterization of surface morphology of nanostructured copper
164.
Modeling and computerized investigation of surface Acoustic wave resonator sensors
165.
Modeling and realizations of surface acoustic wave devices
166.
Modelling of hydrogeological conditions in Estonian oil shale deposit - the case of dewatering a surface mine
167.
Modification of low-density polyethylene using surface-active substance
168.
Molecularly imprinted polymer integrated with a Surface Acoustic Wave technique for detection of sulfamethizole
169.
Monitoring of surface water quality in small agricultural watersheds : methodology and optimation of monitoring network
170.
Monitoring pesticides in surface waters of the country
171.
Motion control of an autonomous surface vessel for enhanced situational awareness
172.
Multifractal defects versus non-defects in surface analysis
173.
Multipole surface-mounted permanent magnet synchronous generators for wind applications
174.
Multiscale change detection in a supraglacial stream using surface drifters
175.
Nano-scale sulfurization of the Cu2ZnSnSe4 crystal surface for photovoltaic applications
176.
Natural convection heat transfer phenomena near the surface covered by riblets
177.
Nature of materials obtained by sorption of M2+ and M3+ metal ions on apatite surface
178.
New high frequency surface fatigue wear tester : design and first results
179.
Nitrogen surface water retention in the Baltic Sea drainage basin
180.
Nutrient retention and export to surface waters in Lithuanian and Estonian river basins
181.
Of different approaches of calculations of the surface properties of wood
182.
On dispersion properties of surface motions in the Gulf of Finland
183.
On the buoyant sub-surface salinity maxima in the Gulf of Riga
184.
On the uncertainty of measurement by measuring the form of a surface
185.
open surface drifter for river flow field characterization
186.
Operational monitoring of the surface waters of the Baltic Sea with SOOGuard system
187.
Optoelectronic surface emitters of terahertz radiation from copper chalcogenides
188.
Oxidation of reactive azo-dyes with pulsed corona discharge : surface reaction enhancement
189.
Peculiarities of surface of Karelia as sources of water-supply
190.
Performance analysis of freeware filtering algorithms for determining ground surface from airborne laser scanning data
191.
Perspectives for the mining of oil shale and limestone with surface miner in Estonia
192.
Pesticides banned in Estonia for decades detected in surface, groundwater [Online resources]
193.
Photogrammetry of Apollo 11 surface imagery
194.
Plasma transferred ARC (PTA) hardfacing of recycled hardmetal reinforced nickel-matrix surface composites
195.
Pre- and posttreatment effect to the surface properties of thin hard coatings
196.
Predicting characteristics of the surface roughness
197.
Preservation of historic wooden buildings with traditional surface finishes
198.
Principles of surface-specific tool selection
199.
Properties of CuInS2 free surface and the effect of conductive polymer layers on these properties
200.
Properties of the CuInS2 surface and the effect of organic layers
201.
Protein-imprinted polymer films as a biorecognition layer for surface acoustic wave sensing platform
202.
Rapid water quenching and formation of thermal fatigue cracks on tube surface
203.
Reflectionless surface wave dynamics in channels of variable depth and width [Online resource]
204.
Registration and analysis of surface electromyograms
205.
Reliability assessment of cutting tool materials using surface fatigue device
206.
Removal of mechanical additives from the surface of cast niobium
207.
Response surface method for optimization of synchronous reluctance motor rotor
208.
Review of surface treatment technology in Estonia
209.
Risk assessment of surface miner for Estonian oil shale mining industry
210.
Road surface surveying using terrestrial laser scanner and total station technologies
211.
Rough surface model using the potential function superpositions
212.
Run-up of surface waves on a sea wall built on a convex bottom profile
213.
Sea surface temperature variations in the south-eastern BalticSea in 1960–2015
214.
Shipborne GNSS acquisition of sea surface heights in the Baltic Sea
215.
Shipborne GNSS-determined sea surface heights using geoid model and realistic dynamic topography
216.
Simultaneous road edge and road surface markings detection using convolutional neural networks
217.
Skin surface vibration measurement by optical self mixing in a diode laser
218.
Solar radiation at the surface in the Baltic Proper
219.
Soluble CD44 interacts with intermediate filament protein vimentin on endothelial cell surface
220.
Solving contact problems with elastic foundation surface model
221.
Solving contact problems with the elastic foundation surface model
222.
Statistical characteristics of coefficients of a cubic approximation of isotherms of surface active substance films
223.
Study of ionic liquids used for silica surface modification by capillary electrophoresis
224.
Study of phase transitions within alumina grown on top of CoAl(100) surface
225.
Study of surface defects in 4H-SiC Schottky diodes using a scanning Kelvin probe
226.
Study of surface dressing in Estonia [Electronic resource]
227.
Study of surface fatigue of wear resistant powder materials
228.
Study of surface fatique of wear resistant powder metallurgical materials
229.
Study of surface parameters of vacuum dried wood
230.
Subharmonic resonant excitation of edge waves by breaking surface waves
231.
Surface active ionic liquids (SAILs) : to squeeze between biodegradability and toxicity constrains
232.
Surface analysis of spray deposited copper indium disulfide films
233.
Surface area of oil shale and its solid pyrolysis products depending on the particle size
234.
Surface characterisation of Estonian oil shale semi-coke
235.
Surface defect‐enhanced conductivity of calcium fluoride for electrochemical applications
236.
Surface degreasing and activation as important factors for Cu electroplating on ITO substrates
237.
Surface fatigue and wear of PVD coated punches during fine blanking operation
238.
Surface fatigue and wear resistance of thin and thick hard coatings
239.
Surface fatigue of Al-metal matrix composites at impact loading
240.
Surface fatique processes at impact wear of powder materials
241.
Surface imprinted conducting polymer microrods for selective protein recognition
242.
Surface imprinted microrods of nucleotide-conducting polymer composites for protein recognition
243.
Surface machined permanent magnets for electromagnetic microactuators
244.
Surface mass balance and stable oxygen isotope ratios from shallow firn cores on Fimbulisen, East Antarctica
245.
Surface Miner technology impact on the environment
246.
Surface mining technology in the zones of tectonic disturbances, Estonian oil shale deposit
247.
Surface molecularly imprinted polydopamine films for recognition of immunoglobulin G
248.
Surface plasmon resonance caused by gold nanoparticles formed on sprayed TiO2 films
249.
Surface plasmon resonance in ZnO nanorod arrays caused by gold nanoparticles for solar cell application
250.
Surface plasmon resonance studies of lipoprotein interactions
251.
Surface properties of birch false heartwood [Online resource]
252.
Surface properties of sprayed and electrodeposited ZnO rod layers
253.
Surface roughness measurement unsertainty estimation using random function
254.
Surface technology in Estonia
255.
Surface tensions of phenolic mixture separated from kukersite oil shale oil
256.
Surface treatment with excimer laser light - the Estonian opportunity
257.
Surface wave conversion analysis on a lengthwise soldered circular cylindrical shell
258.
Surface vessel localization from wake measurements using an array of pressure sensors in the littoral zone
259.
Surface wetting properties of electrodeposited and sprayed ZnO nanorod layers [Online resource]
260.
Surface-centred process planning conception
261.
Surface-imprinted poly-3,4-ethylenedioxythiophene : a new material for preparation of selective artificial receptors
262.
Surface-oriented tool set as a new environment for process planning and concurrent engineering
263.
Synthesis and characterization of pyrite FeS2 solar cell absorber crystals and modifying their surface
264.
Synthesis control of charge separation at anatase TiO2 thin films studied by transient surface photovoltage spectroscopy
265.
Synthesis of higher harmonics surface acoustic wave transducers
266.
The analysis of trace metals and sulfate in the surface layer of ombrothrophic bogs
267.
The chemical changes on the surface of the weathered wood
268.
The Development of surface impronted thin films for immunoglobulin G molecular recognition
269.
The effect of artificial solar light on wood and coatings on wood surface
270.
The effect of drying and artificial solar light on wood surface
271.
The effect of surface pre-treatment and coating post-treatment to the properties of TiN coatings
272.
The effects of an iodine surface layer on Ru reactivity in air and during Cu
273.
The influence of cleaning on corrosive-erosive wear of steam boiler heating surface tubes
274.
The influence of drained peat soils on diffuse nitrogen pollution of surface water
275.
The influence of target surface alterations on pulsed laser deposited YBa2Cu3O7-x film properties
276.
The investigation of the structure of NdFeB surface, acted by laser irradiation
277.
The natural convection heat transfer phenomena near the surface covered by riblets
278.
The new analysing method for the surface EMG data
279.
The new methods for the analyzing of surface EMG signals
280.
The perspective of microbiotests application for the surface water monitoring and effluents control in Estonia
281.
The role of the polar surface and porosity in adsorption of organics by fly ash carbons
282.
The surface miner sustainable oil-shale mining technology testing results in Estonia
283.
The surface miner sustainable technology introduction for oil-shale mining in Estonia
284.
Theoretical study of adsorption of neopentne on the Pt(111) surface
285.
Thermal efficiency of heating surface with riblets
286.
Use of pavement surface texture characteristics measurement results in Estonia
287.
Validation of marine geoid models by profile-wise GNSS measurements on ice surface
288.
Water quenching and formation of thermal fatigue cracks on tube surface
289.
Wear simulation with the Winkler surface model
290.
Wear-resistant composite coatings, surface engineering
291.
Ventricular repolarization evaluation from surface ECG for identification of the patients with increased myocardial electrical instability
292.
A Novel vector control strategy for a six-phase induction motor with low torque ripples and harmonic currents
293.
A novel vector control strategy for six-phase induction motor with low torque ripples and harmonic currents
294.
A numerical study of circulation in the Gulf of Riga, Baltic Sea. Part I : Whole-basin gyres and mean currents
295.
Correlation of upper Llandovery-lower Wenlock bentonites in the När (Gotland, Sweden) and Ventspils (Latvia) drill cores: role of volcanic ash clouds and shelf sea currents in determining areal distribution of bentonite
296.
Currents in the Suur Strait and their role in the nutrient exchange between the Gulf of Riga and the Baltic Proper
297.
Joint impact of currents and winds on the patch formation near the coasts of the Gulf of Finland
298.
Structure and variability of currents in the stratified Gulf of Finland = Hoovuste muutlikkus ja struktuur stratifitseeritud Soome lahes
299.
2D estimation of velocity relative to water and tidal currents based on differential pressure for autonomous underwater vehicles
300.
2D estimation of velocity relative to water and tidal currents based on differential pressure for autonomous underwater vehicles
võtmesõna
116
1.
surface currents
2.
calculation of short-circuit currents
3.
coastal currents
4.
currents
5.
density currents
6.
eddy currents
7.
eddy-currents
8.
fault currents
9.
Geostrophic currents
10.
gravity currents
11.
harmonic currents
12.
harmonic voltages and currents
13.
leakage currents
14.
leakge currents
15.
membrane currents
16.
ocean currents
17.
sea currents
18.
seasonal currents
19.
statistics of currents
20.
antimicrobial surface
21.
Au surface
22.
autonomous surface vessel
23.
autonomous surface vessels
24.
body surface area
25.
bulk and surface damage
26.
digital surface model (DSM)
27.
fibre surface
28.
flat surface
29.
flotation and surface chemistry processes
30.
free-surface flow
31.
gas-liquid contact surface
32.
groundwater/surface water interactions
33.
high surface area carbon
34.
Hirshfeld surface
35.
indentational surface fatigue
36.
magnetization surface
37.
mapping of road surface
38.
pavement surface
39.
pavement surface characteristics
40.
powder surface cleaning
41.
response surface methodology
42.
Response Surface Methodology (RSM)
43.
response surface modelling
44.
road surface markings
45.
sea surface
46.
sea surface height
47.
sea surface heights
48.
sea surface observations
49.
sea surface salinity
50.
sea surface semperature (SST)
51.
sea surface temperature
52.
sea surface temperature (SST)
53.
sea surface topography
54.
sea-surface salinity
55.
specific surface area
56.
spherical surface harmonics
57.
sub-surface chlorophyll maxima
58.
surface acoustic wave
59.
surface acoustic wave sensor
60.
surface active ionic liquids
61.
surface active substances
62.
surface area
63.
surface basis-cubic spline
64.
surface characterization
65.
surface charge
66.
surface chemical composition
67.
surface clusters
68.
surface coating
69.
surface contamination
70.
surface defect
71.
surface deposition
72.
surface discharge
73.
surface drifters
74.
surface EMG
75.
surface engineering
76.
surface fatigue
77.
surface fatigue wear
78.
surface film
79.
surface fire
80.
surface gravity waves
81.
surface imprinting
82.
surface influence
83.
surface interactions
84.
surface models
85.
surface morphology
86.
surface permanent magnet machine (SPM)
87.
surface permanent magnet synchronous machines (SPMSM)
88.
surface photovoltage
89.
surface plasmon resonance
90.
surface plasmon resonance effect
91.
surface plasmon resonance imaging
92.
Surface pollution
93.
surface preparation
94.
surface pre-treatment
95.
surface properties
96.
surface roughness
97.
surface stress
98.
surface structure
99.
surface tension
100.
Surface topography
101.
surface treatment
102.
surface treatments
103.
surface water monitoring
104.
surface water-groundwater interactions
105.
surface wave analysis
106.
surface waves
107.
surface waves and tides
108.
surface waves in water
109.
surface wind
110.
surface vs. crown fires
111.
surface-mount technology
112.
Surface-sediment
113.
waves on the surface
114.
vertical surface well hydraulic fracturing
115.
3D areal surface texture parameters
116.
3D surface patterns
allikas
28
1.
Currents. Vol. 29/30, Currents goes east
2.
Surface 95 : 1st Central, Eastern and Northern Europe Regional Conference on Surface Treatment : Technologies, Environmental and Standardization, September 4-8, 1995, Palanga, Lithuania
3.
Surface modification technologies : proceedings of the 20th International Conference on Surface Modification Technologies : September 25-29, 2006, Vienna, Austria
4.
Surface Modification Technologies XXVIII : Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies : Tampere University of Technology, Tampere, Finland, June 16-18, 2014
5.
1st Mediterranean Conference on Heat Treatment and Surface Engineering : Heat Treatment and Surface Engineering in the Manufacturing of Metallic Engineering Components : December 1-3, 2009, Sharm El-Sheikh, Egypt
6.
1st Mediterranean Conference on Heat Treatment and Surface Engineering : Heat Treatment and Surface Engineering in the Manufacturing of Metallic Engineering Components : December 1-3, 2009, Sharm El-Skeikh, Egypt
7.
Advanced coatings & surface technology
8.
Agricultural effects on ground and surface waters : research at the edge of science and society
9.
Apollo 11 Lunar Surface Journal
10.
Applied surface science
11.
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII
12.
Computer methods and experimental measurements for surface effects and contact mechanics VIII
13.
Earth surface processes and landforms
14.
International heat treatment and surface engineering
15.
International journal of computational materials science and surface engineering
16.
J.Appl. surface science
17.
Modeling solar radiation at the Earth's surface : recent advances
18.
Proceedings : 8th International Symposium : Continous Surface Mining : Aachen, Germany, 24...27.09.2006
19.
Proceedings of International Surface Engineering Congress (ISEC) : 15-18 May 2006, Seattle, USA
20.
Proceedings of the Heat Treatment and Surface Engineering 19th Congress : Glasgow, Scotland, 17-20 October, 2011
21.
Surface & coatings technology
22.
Surface and coatings technology
23.
Surface and interface analysis
24.
Surface engineering
25.
Surface science
26.
Surface topography : metrology and properties
27.
Surface treatment VI
28.
4th International Conference on Adhesion and Surface Analysis, Loughborough University, UK, April 16-18, 1996