Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
high heating rate (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
Tühista
teaviku laadid
raamat
artikkel ajakirjas
artikkel ajalehes
artikkel kogumikus
dissertatsioon
Open Access
Teaduspublikatsioon
aasta
Kirjeid leitud
6
Vaata veel..
(4/1184)
Ekspordi
ekspordi kõik päringu tulemused
(6)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel ajakirjas
Joint reduction of NiO/WO3 pair and NiWO4 by Mg + C combined reducer at high heating rates
Zakaryan, Marieta
;
Nazaretyan, Khachik
;
Aydinyan, Sofiya
;
Kharatyan, Suren
Metals
2021
/
art. 1351, 13 p. : ill
https://doi.org/10.3390/met11091351
artikkel ajakirjas
2
artikkel ajakirjas
Kinetic highlights of the reduction of silver tungstate by Mg + C combined reducer
Zakaryan, Marieta
;
Nazaretyan, Khachik
;
Aydinyan, Sofiya
;
Kharatyan, Suren
Metals
2022
/
art. 1000
https://doi.org/10.3390/met12061000
artikkel ajakirjas
3
artikkel ajakirjas
NiO reduction by Mg plus C combined reducer at high heating rates
Zakaryan, Marieta
;
Nazaretyan, K.T.
;
Aydinyan, Sofiya
;
Kharatyan, Suren
Journal of thermal analysis and calorimetry
2021
/
p. 1811-1817 : ill
https://doi.org/10.1007/s10973-020-10148-5
artikkel ajakirjas
4
artikkel kogumikus
Preparation of nanosize MO2C by combining solution combustion synthesis with subsequent F
Nazaretyan, Khachik
;
Kirakosyan, Hasmik
;
Aydinyan, Sofiya
;
Kharatyan, Suren
JTACC+V4 : 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference : June 6–9, 2017, Budapest, Hungary : Book of Abstracts
2017
/
p. 58
https://static.akcongress.com/downloads/jtacc/jtacc2017-book-of-abstracts.pdf
artikkel kogumikus
5
artikkel ajakirjas
Reduction mechanism of WO3 + CuO mixture by combined Mg/C reducer : non-isothermal conditions-high heating rates
Aydinyan, Sofiya
;
Nazaretyan, Khachatur
;
Zargaryan, A.G.
;
Tumanyan, M.E.
;
Kharatyan, Suren
Journal of thermal analysis and calorimetry
2018
/
p. 261–269 : ill
https://doi.org/10.1007/s10973-018-6985-5
artikkel ajakirjas
6
artikkel ajakirjas
The interaction pathway in the mechano-ultrasonically assisted and carbon-nanotubes augmented nickel–aluminum system
Nazaretyan, Khachik
;
Kirakosyan, Hasmik
;
Volobujeva, Olga
;
Aydinyan, Sofiya
Metals
2022
/
art. 436
https://doi.org/10.3390/met12030436
artikkel ajakirjas
Kirjeid leitud 6, kuvan
1 - 6
pealkiri
866
1.
Study of reduction mechanism of WO3+CuO mixture by combined Mg/C reducer - influence of high heating rate
2.
NiO reduction by Mg plus C combined reducer at high heating rates
3.
Joint reduction of NiO/WO3 pair and NiWO4 by Mg + C combined reducer at high heating rates
4.
Amino acids are key substrates to Escherichia coli BW25113 for achieving high specific growth rate
5.
High temperature corrosion of boiler heating surfaces metal
6.
Specific nitrite oxidation rate on high surfaced biofilm carriers dependent on free ammonia and temperature
7.
The fouling of steam boiler heating surfaces in burning high calcium oxide content fuels
8.
Wear rate of nanocrystalline diamond coating under high temperature sliding conditions
9.
Cascade sub-low temperature district heating networks in existing district heating systems
10.
Comparison of different heart rate reconstruction algorithms for rate adaptive cardiac pacing
11.
Comparison of different physiological parameters for heart rate modelling in rate adaptive cardiac pacing
12.
Modelling of heart rate, based on measured physiological parameters for rate adaptive cardiac pacing
13.
Reduction of heating costs in district heating systems
14.
Energy cascade connection of a low-temperature district heating network to the return line of a high-temperature district heating network
15.
High gain DC-AC high-frequency link inverter with improved quasi-resonant modulation
16.
High pressure high temperature consolidation of ZrC based ceramic composites
17.
High-entropy eutectic composites with high strength and low Young's modulus
18.
Isolated high-frequency link PFC rectifier with high step-down factor and reduced energy circulation
19.
Multiphysic Analysis of High Power Microwave Filter Using High Performance Aluminium Alloy
20.
Multi-type dislocation substructure evolution in a high-strength and ductile duplex high-entropy nanocomposites
21.
New high-gain step-up DC/DC converter with high-frequency isolation
22.
Output rectifier for the high-voltage high-frequency isolated DC/DC converter
23.
Overcoming EMI problems in the high-power high-frequency DC/DC converters - a case study
24.
Prediction of semiconductor losses in a high-power high-voltage DC/DC converter
25.
Scintillators for high efficiency and high spatial resolution in - ray imaging applications
26.
ZrC based ceramics by high pressure high temperature SPS technique
27.
Heating rate efect on the thermal behaviour of some clays and their mixtures with oil shale ash additives
28.
Heating rate effect on the thermal behavior of ammonium nitrate and its blends with limestone and dolomite
29.
Heating rate effect on the thermal behavior of some clays and their blends with oil shale ash additives
30.
Heating rate effect on the thermal behaviour of ammonium nitrate and its blends with limestone and dolomite
31.
Demand controlled ventilation indoor climate and energy performance in a high performance building with air flow rate controlled chilled beams
32.
Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
33.
Research of specific nitrite oxidation rate on high surfaced biofilms carriers with free ammonia and temperature variations
34.
Basics of optimal design of district heating pipelines diameters and design examples of Estonian old non-optimised district heating networks
35.
Changes in the heating load of domestic hot water and its impact on the design of the district heating network
36.
Comparison of single-rate and two-rate neural control approaches for coaxial rotor/ducted-fan TUAV for situational awareness applications
37.
Dynamic heating control measured and simulated effects on power reduction, energy and indoor air temperature in an old apartment building with district heating
38.
5th generation district heating and cooling (5GDHC) implementation potential in urban areas with existing district heating systems
39.
Heating sizing power reduction in buildings connected to district heating with dynamically controlled DHW setback and flow limiters
40.
Single-Rate versus Three-Rate Neural Assisted Control Approaches for Coaxial Rotor Ducted Fan TUAV for Situation Awareness Applications
41.
The impact of building renovation with heat pumps to competitiveness of district heating : Estonian district heating pricing system needs more flexibility
42.
5th generation district heating and cooling (5GDHC) implementation potential in urban areas with existing district heating systems
43.
A frequency-controlled electrical drive for an additional water pump in a district heating plant
44.
A method of optimizing fenestration design for daylighting to reduce heating and cooling loads in offices
45.
Additional €10 million for universities could be spent on heating [Online resources]
46.
Advanced control of district heating processes in Estonia = Keskkütte soojuse tootmisprotsesside juhtimine
47.
Analysis of heating energy of ventilation and underground heat exchanger in North European passive houses
48.
Analysis of heating energy of ventilation systems in non-residental passive houses in Estonia
49.
Analysis of household electricity consumption patterns and economy of water heating shifting and saving bulbs
50.
Buildings' energy efficiency measures effect on CO2 emissions in combined heating, cooling and electricity production
51.
Chemical heating for non-instrumented nucleic acid amplification on lab-on-a-chip devices
52.
Climate change and energy demand for heating and cooling of buildings in Finland
53.
Comparison of district heating supply options for different CHP configurations
54.
Composition and properties of the heating products of calcium phosphate-aluminociliate mixtures
55.
Composition and properties of the heating products of calcium phosphate-aluminosilicate mixtures
56.
Composition and properties of the heating products of calcium phosphate-aluminosilicates mixtures
57.
Dealkylation kinetics of alkylresorcinols by shock heating pyrolysis
58.
Detailed and simplified window model and opening effects on optimal window size and heating need
59.
Determination of heating value of Estonian oil shale by laser-induced breakdown spectroscopy
60.
Development of Young's modulus of illitic clay during heating up to 1100 °C
61.
District heating and CHP in Estonia
62.
Economic dispatch of CHP units through District Heating Network’s demand-side management
63.
Effective universal water heating boiler for wood pellets
64.
Efficiency of pipes thermal insulation in Estonian district heating networks [Electronic resource]
65.
Efficient use of heat from CHP distributed by district heating system in district cooling networks
66.
Energy demand for the heating and cooling of residential houses in Finland in a changing climate
67.
Energy efficiency of hydronic space-heating distribution systems in super-insulated residential buildings
68.
Energy saving additional water pump in a district heating plant
69.
Estimating time constants for underfloor heating control
70.
Estimation of heat losses in district heating networks
71.
Estimation of thermal insulation efficiency of Estonian district heating networks
72.
Evaluation factor for district heating network heat loss with respect to network geometry
73.
Evolution of microstructure and properties in Ti-alloys during rapid electrocontact heating with SPD
74.
Experimental analysis of cost optimization for electrical floor heating systems in volatile energy markets
75.
Feasibility of thermal energy storage integration into biomass CHP-based district heating system
76.
Feasibility study of 8 megawatt frequency controlled pumping station of heating power plant
77.
Finite element modelling of the resistive heating of disposable molecular diagnostics devices
78.
GIS-based optimisation for district heating network planning
79.
Heat energy consumption in heating and hot tap water systems in apartment buildings
80.
Heat pump use in rural district heating networks in Estonia
81.
Heat recovery ventilation system heating energy weather normalization – calculation method and case study
82.
Heating system efficiency aspects in low-energy residential buildings = Küttesüsteemi efektiivsuse aspektid madalenergia eluhoonetes
83.
Heating system return temperature effect on heat pump performance
84.
Heating-induced transition of Potyvirus Potato Virus A coat protein into β-structure
85.
Improvement of district heating network energy efficiency by pipe insulation renovation with PUR foam shells
86.
Influence of heating conditions on the formation of sol-gel derived calcium hydroxyapatite
87.
Influence of oil shale ash addition on thermophysical processes in an illitic clay during heating
88.
Influence of substrate plate heating on the fabrication of Al-12Si produced by selective laser melting
89.
Influence of time constants on low energy buildings' heating control
90.
Interaction of calcium polyphosphates with calcite and dolomite on heating
91.
Large-scale heat pumps for district heating systems in the Baltics : potential and impact
92.
Long-term policy recommendations for improving the efficiency of heating and cooling
93.
Low temperature radiator heating distribution and emission efficiency in residential buildings
94.
Low temperature radiator heating system detailed dynamic simulation - distribution and emission efficiency
95.
Machine learning approach for flexibility characterisation of residential space heating
96.
Method to divide heating energy in energy efficient building without direct measuring
97.
Methodological approach to determining the effect of parallel energy consumption on district heating system
98.
Methodology for evaluating the transition process dynamics towards 4th generation district heating systems
99.
Methodology for the improvement of large district heating networks
100.
Microgrid oriented modeling of space heating system based on neural networks
101.
Microstructure evolution in titanium alloys enforced by Joule heating and severe plastic deformation concurrently
102.
Model for energy management of residential building heating system
103.
Model-based control design for a district heating plant
104.
Modelling and experimental characterisation of self-regulating resistive heating elements for disposable medical diagnostics devices
105.
Modelling and experimental characterisation of thermoelectric heating for molecular diagnostics devices
106.
Modelling of wax actuators in underfloor heating manifolds
107.
Nanosize molybdenum carbide preparation by sol-gel combustion synthesis with subsequent fast heating
108.
Nearly zero energy office building without conventional heating
109.
Nitrogen oxide emisson studies in medium scale Estonian heating plants
110.
Optimal dimensioning of Estonian old non-optimised district heating networks
111.
Optimal PI control parameters for accurate underfloor heating temperature control
112.
Peculiarities of the formation of calcium hydroxyapatite, Ca10(PO4)6(OH)2, at different heating conditions
113.
Phase transformations in mixtures of calcite and dolomite with condensed phosphates of calcium during heating
114.
Phase transformations in titanium alloys by rapid electric conduction heating with SPD
115.
Physico-chemical transformations during heating of phosphorites
116.
Physico-chemical transformations during heating the phosphorites
117.
PI parameter influence on underfloor heating energy consumption and setpoint tracking in nZEBs
118.
Planning of district heating regions in Estonia
119.
Policy incentives for flexible district heating in the Baltic countries
120.
Predictive smart thermostat controller for heating, ventilation, and air-conditioning systems
121.
Primary energy factor for district heating networks in European Union member states
122.
Primary energy factors for different district heating networks: an Estonian example
123.
Promoting efficient district heating in Estonia
124.
Radiant panel and air heating performance in large industrial buildings
125.
Radiator, underfloor and air heating efficiency
126.
Rakvere Smart House Competence Centre nZEB office building without conventional heating
127.
review of low-temperature sub-networks in existing district heating networks : examples, conditions, replicability
128.
Self-heating phenomenon and current suppressing effect at 6H-SiC Schottky interfaces
129.
Self-heating phenomenon and current suppressing effect at the SiC Schottky interfaces
130.
Seminar on District Heating and Electricity Cogeneration, 20-21 May, 1999, Tallinn : proceedings
131.
Setback efficiency of limited-power heating systems in cold climate
132.
Small low-temperature district heating network development prospects
133.
Technical improvement potential of large district heating network : application to the case of Tallinn, Estonia
134.
The effect of the district heating return temperature reduction on flue gas condenser efficiency
135.
The impact of alternative heat supply options on CO2 emission and district heating system
136.
The impact of infiltration on heating systems dimensioning in Estonian climate
137.
The impact of parallel energy consumption on the district heating networks
138.
The influence of cleaning on corrosive-erosive wear of steam boiler heating surface tubes
139.
The influence of district heating on the emissions in Estonia
140.
The influence of domestic hot water maximum consumption on the district heating network dimensioning
141.
The major characteristic parameters and present efficiency of the Estonian district heating networks
142.
The major characteristic parameters of the Estonian district heating networks and their efficiency increasing potential
143.
The major characteristic parameters of the Estonian district heating networks, their problems and development
144.
The mechanism of fouling steam generator heating surfaces under the combustion products of solid fuels
145.
The new dimensioning method of the district heating network
146.
The peculiarities by firing oil shale fuel with different heating value nn CFB boilers
147.
The potential of thermal energy storage technologies in district heating system in Estonia
148.
The preliminary research of sea water district heating and cooling for Tallinn coastal area
149.
The renovation plan development example for old district heating network in Narva city [Electronic resource]
150.
The self-heating phenomenon in Schottky diode
151.
Thermal efficiency of heating surface with riblets
152.
Transformation of calcium dihydrogenphosphate in mixtures with apatite concentrate upon heating
153.
Transition towards university campus carbon neutrality by connecting to city district heating network
154.
Universal single-phase voltage converter for illumination, heating and ventilation systems
155.
Value stream mapping for evaluation of load scheduling possibilities in a district heating plant
156.
Value stream mapping for evaluation of load scheduling possibilities in a district heating plant [Electronic resource]
157.
Vertical temperature gradient and operative temperature with three heating systems in a low-energy building
158.
Why is the correct dimensioning of the water heating equipment necessary?
159.
Young’s modulus of different illitic clays during heating and cooling stage of firing
160.
A new method of continuous cultivation with computer controlled change of dilution rate
161.
Adaptive algorithms for heart rate reconstruction
162.
Adaptive-rate inductive impedance based coin validation
163.
Application of continuous cultivation at maximum growth rate for ethanol production
164.
Article 142 TFEU on the exchange-rate policy
165.
Asymmetric exchange rate exposure of stock returns : empirical evidence from Chinese industries
166.
Asymmetric exchange rate exposure of stock returns : empirical evidence from Chinese industries [Online resource]
167.
Bioimpedance based control of rate limit in artificial cardiac pacing
168.
Business schools' organizational learning rate dependence on the management system : example of Estonia
169.
Can pulse wave transit time as a control parameter be used for rate adaptive cardiac pacing?
170.
CAP waveform estimation from the measured electrical bioimpedance values : patient’s heart rate variability analysis
171.
Carbon accumulation rate in a raised bog in Latvia, NE Europe, in relation to climate warming
172.
Combined strain rate, mesh size and calibration test influence on structural failure : Miniature ship grounding test
173.
Comparative analysis of two methods for evaluating wear rate of nanocrystalline diamond films
174.
Comparison of ECG QT interval and monomorphic action potential duration dynamicity at heart rate variations
175.
Comparison of predictive equations for basal metabolic rate
176.
Continuous cultivation of insect and yeast cells at maximum specific growth rate
177.
Convergence rate of iterative process and weighted means
178.
Curing rate of urea-formaldehyde adhesives
179.
Current account drivers and exchange rate regimes in Central and Eastern Europe
180.
Current account dynamics and exchange rate regimes in Central and Eastern Europe
181.
Decentralization of stochastic multivariable discrete-time control systems on two-rate aggregative subsystems
182.
Decentralized partitioning and simulation of three-rate stochastic multidimensional continuous-time state-space models
183.
Decomposition of stochastic multivariable continuous-time control systems in state space on three-rate autonomous subsystems
184.
Deep habits and exchange rate pass-through
185.
Demand and supply chain simulation in telecommunication industry by multi-rate expert systems
186.
Demand and supply chain simulation in telecommunication industry by multi-rate expert systems [Electronic resource]
187.
Design of three-rate stochastic multivariable continuous-time control systems
188.
Design of two-rate decentralized linear quadratic regulators for continuous-time stochastic multivariable control systems
189.
Design of two-rate stochastic multivariable discrete-time control systems
190.
Detailed analysis of metabolism reveals growth-rate-promoting interactions between Anaerostipes caccae and Bacteroides spp
191.
Discrete control in three-rate nonlinear continuous-time systems
192.
Dissolution rate of oil shale thermobitumen in different solvents
193.
Economic policy uncertainty shocks, economic activity, and exchange rate adjustments
194.
Effect of solution spray rate on the properties of chemically sprayed ZnO:In thin films
195.
Electrical bio-impedance measurement in a rate-adaptive pacemaker
196.
Ergonomics in slowing down the human ageing rate and increasing the life expectancy
197.
Estimating total urea removal and protein catabolic rate by monitoring UV absorbance in spent dialysate
198.
Estimation of coastal dunes recession rate in the Russian part of the Curonian Spit
199.
Evaluation of condensation rate of methylolphenols
200.
Evaluation of the quality of rate adaption algorithms for cardiac pacing
201.
Evaluation of wear rate of nanocrystalline diamond films esing Abbott curve
202.
Exchange rate changes and stock returns in China : a Markov switching SVAR approach [Online resource]
203.
Exchange rate policies in the Baltic States : from extreme inflation to euro membership
204.
50 Hz electric field effect on heart rate variability
205.
50 Hz magnetic field affects heart rate variability - an experimental study
206.
Fingerprint recognition for distorted image applications using three-rate hybrid Kohonen neural network
207.
Fingerprint recognition for varied degrees of image distortion using three-rate hybrid Kohonen neural network
208.
Forecasting the Estonian rate of inflation using factor models
209.
Fuzzy logic control of three-rate decentralized optimal control submodels of the Lockheed L1011 Tristar aircraft
210.
Fuzzy logic in simulation of Lockheed L1011 aircraft three-rate model
211.
Generalized rate equation for one-substrate enzymatic reactions
212.
Has the relationship between the real exchange rate and its fundamentals changed over time?
213.
Heart rate variability in relation of autonomic dysfunctions of nervous system
214.
Heart rate, blood pressure and left ventricular hypertrophy in middle-aged Tallinn population
215.
Impedance controlled pacing rate limits in cardiac pacemakers
216.
Individualisation of model for reconstruction of heart rate
217.
Interest rate spreads in Estonia : different stories for different types of loan
218.
Intermittency and long-range structurization of heart rate = Südamerütmi pikamastaabiline kord ja juhumuutlikkus
219.
Intracardiac electrical bioimpedance as a basis for controlling of pacing rate limits
220.
Investigating the drop-out rate from a BIM course
221.
Investigating the drop-out rate from a BIM for infrastructure course
222.
Investigating the oil price-exchange rate nexus : evidence from Africa 1970-2004
223.
Low interest rate environment: inventory management in Finland and Baltic States
224.
Low-quality fingerprint recognition using three-rate hybrid Kohonen neural network [Electronic resource]
225.
Macroeconomic news and sovereign interest rate spreads before and during quantitative easing
226.
Mass-loss rate in EHB binary progenitors
227.
Measurement of correlation between heart rate and physiological parameters variations
228.
Measurement of intracardiac bioimpedance in rate adaptive pacemakers
229.
Microcanonical rate constant in case of intramolecular large amplitude vibrations
230.
Minimum weight problem of strain-rate sensitive circular plates, subjected to dynamic loading
231.
Modelling and simulation of two-rate state-space models for stochastic multivariable continuous-time control systems
232.
Multi-rate expert systems in supply chain simulation for telecommunication industry [Electronic resource]
233.
Noisy voice pattern recognition by three-rate hybrid neural network
234.
On the estimation of complex circuits functional failure rate by machine learning techniques
235.
Organizational learning rate dependence on national wealth : case study of business schools
236.
Organizational learning rate measurement instruments for business schools
237.
Organizational learning rate measurement instruments for business schools [Electronic resource]
238.
Pilot study for estimating physical fatigue based on heart rate variability and reaction time
239.
PLC-based flow rate control system for centrifugal pumps
240.
Power plant fuel consumption rate during load cycling
241.
Processing of blurred image by the two-rate hybrid Kohonen neural network
242.
Processing of distorted fingerprints with use of three-rate hybrid kohonen neural networks
243.
Processing of distorted fingerprints with use of three-rate hybrid kohonen neural networks [Electronic resource]
244.
Processing of two-dimensional data with use of two-rate Kohonen's neural networks [Electronic resource]
245.
Protein catabolic rate estimated by on-line monitoring of the UV-absorbance in the spent dialysate
246.
Proteome reallocation in Escherichia coli with increasing specific growth rate
247.
Rate adaptive pacemaker
248.
Real exchange rate misalignments in CEECs : Have they hindered growth?
249.
Recommendation for temperature calibration of fast scanning calorimeters (FSCs) for sample mass and scan rate
250.
Regression models and fuzzy logic prediction of TBM penetration rate
251.
Simulation of missile autopilot with two-rate hybrid neural network system
252.
Simulation of noise-cancelling in the cocpit of an aircraft using two-rate hybrid neural network
253.
Simulation of three-rate decentralized LQG control for Lockheed L1011 aircraft
254.
Simulation of three-rate neural network control for stochastic model of a fighter aircraft
255.
Simulation of two-rate hybrid control for nonlinear stochastic model of a diesel engine actuator
256.
Simulation of two-rate hybrid control for stochastic model of missile autopilot
257.
Simulation of two-rate neural network control for stochastic model of an experimental aircraft
258.
Simulation of two-rate neural network control for stochastic model of missile autopilot
259.
Simulation of two-rate neural network control stochastic model of missile autopilot
260.
Simultaneous measurement of rate adaptive heart pacemaker sensing parameters
261.
Specific growth rate dependent transcriptiome profiling of Escherichia coli K12 MG1655 in accelerostat cultures
262.
System of electrically measured physiological parameters for reconstruction of heart rate
263.
The choise of exchange rate regime in emerging-market and transition economies
264.
The discrete control of two-rate nonlinear multivariable continuous-time systems
265.
The effect of erosion parameters on the erosion rate of ceramics
266.
The effect of growth temperature and spraying rate on the properties of ZnO:In films
267.
The effect of static magnetic field on heart rate variability - an experimental study
268.
The effect of static magnetic field on heart rate variability - an experimental study [Electronic resource]
269.
The present state and long-rate development of sanitary hygienic aspects of water quality
270.
The rate and degree of proteolysis is determined by cheesemaking conditions
271.
The rate of bone mineralization in birds is directly related to alkaline phosphatase activity
272.
The state-space description of two-rate nonlinear multivariable discrete systems
273.
Two-rate LQG control of VTAV for enhanced situational awareness
274.
Two-rate neural predictive control of coaxial rotor/ducted-fan TUAV for enhanced situational awareness
275.
Two-rate neuro-fuzzy hybrid control for model of an experimental aircraft
276.
Two-rate state-space continuous-time models for subsystems of stochastic multivariable control systems
277.
Unemployment rate cycles in Europe
278.
Use of changestat for growth rate studies of gut microbiota
279.
Use of slow dilution rate changes in the study of bacterial growth characteristics
280.
Ventilation rate and room size effects on infection risk of COVID-19
281.
50 Hz electric field effect on heart rate variability
282.
50 Hz magnetic field affects heart rate variability - an experimental study
283.
Comparison of 2- and 3-level Half-Bridge DC/DC converters for high-voltage high-power applications
284.
Comparison of control methods for high-voltage high-power three-level half-bridge DC/DC converters [Electronic resource]
285.
Evaluation of different high-voltage switch solutions for high-power converters used in rolling stock [Electronic resource]
286.
Evaluative analysis of 2- and 3-level DC/DC converters for high-voltage high-power applications [Electronic resource]
287.
Feasibility study of half- and full-bridge isolated DC/DC converters in high-voltage high-power applications
288.
Feasibility study of half- and full-bridge isolated DC/DC converters in high-voltage high-power applications [Electronic resource]
289.
High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
290.
High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering
291.
Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
292.
Mechanical properties and self-healing capacity of ultra high performance fibre reinforced concrete with alumina nano-fibres : tailoring ultra high durability concrete for aggressive exposure scenarios
293.
Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
294.
Research and development of digital control systems and algorithms for high power, high voltage isolated DC/DC converters = Võimsate kõrgepingeliste alalisvoolumuundurite arvjuhtimissüsteemide ja -algoritmide uurimine ni
295.
Research and development of high-power high-voltage DC/DC converters = Võimsate kõrgepingeliste alalispingemuundurite uurimine ja välmimine
296.
Some design considerations for high-power high-voltage DC/DC converter with improved power density and efficiency
297.
The effect of modality on linear low-density polyethylene crystallization behaviour at high and very high supercoolings
298.
A global methodology for test program generation starting from high level specifications
299.
A high temperature corrosion resistance of boiler steels in the presence of chlorine-containing surface deposits
300.
A high-frequency small-geometry MOSFET model
301.
A high-performance MEMRISTOR-based Smith-Waterman DNA sequence alignment using FPNI structure
302.
A High-performance open-source finite element analysis library for magnetics in MATLAB
303.
A low voltage high input bandwidth downconversion mixer
304.
A model for high Reynolds number vortex rings
305.
A MPPT control method for full soft-switching high step-up current-fed DC-DC converter
306.
A new high power factor single-phase diode rectifier with optimum ripple-power conversion
307.
A new high step-up switched-capacitor/inductor based DC-DC converter
308.
A new high-power DC/DC converter for residential fuel cell power systems [Electronic resource]
309.
A new type of compact silencer for high requency noise
310.
A novel extendable high gain step up DC-DC converter
311.
A novel high-voltage half-bridge converter with phase-shifted active rectifier [Electronic resource]
312.
A simplified peak current mode control algorithm for special purpose high voltage IGBT converters
313.
A synthesis-agnostic behavioral fault model for high gate-level fault coverage
314.
A theorem for methods with high-order convergence
315.
A tool for random test generation targeting high diagnostic resolution
316.
A typical wave wake from high-speed vessels : its group structure and run-up
317.
ABB YuMi high-speed pick and place game in action
318.
Achieving a high level of open market-information symmetry with decentralised insurance marketplaces on blockchains
319.
Acoustical barriers for a high speed line "Moscow-St.Petersburg"
320.
Additive manufacturing of CoCrFeMnNi high-entropy alloy/AISI 316L stainless steel bimetallic structures
321.
Additive manufacturing of high-entropy alloys
322.
Advanced condition monitoring method for high voltage overhead lines based on visual inspection
323.
Alalisvooluülekanne [Võrguteavik] : sõnastik = High-voltage direct current (HVDC) transmission : vocabulary (IEC 60633:2019)
324.
Al-SiC nanocomposites produced by high-energy milling and hot pressing
325.
An approach for PSL assertion coverage analysis with high-level decision diagrams
326.
An ignored key to high productivity and quality
327.
An improved high-power DC/DC converter for distributed power Generation [Electronic resource]
328.
An improved high-voltage IGBT-based half-bridge converter for railway applications
329.
An improved high-voltage IGBT-based half-bridge DC/DC converter for railway applications
330.
An improved ZVS high step-up converter based on coupled inductor and built-in transformer
331.
An interleaved ZVS high step-up converter for renewable energy systems applications
332.
Anaerobic mesophilic digestion of sludge with extra-thermophilic and high pH pre-treatment
333.
Analysis and comparison of high-frequency link converter topologies
334.
Analysis of current doubler rectifier based high frequency isolation stage for intelligent transformer [Electronic resource]
335.
Analysis of extracellular polymeric substances from pre-treated sludge by high-performance size exclusion chromatography
336.
Analysis of oil shale high-selective mining with surface miner in Estonia
337.
Analysis of oscillation suppression methods in the AC-AC stage of high frequency link converters
338.
Analysis of switching properties of different high voltage IGBTs operating under hard-switching conditions
339.
Annealing effect for SnS thin films prepared by high-vacuum evaporation
340.
Application of high-level decision diagrams for simulation-based verification tasks
341.
Architecture of high-throughput telecommunication network
342.
Aspects of high availability and load balancing in logging infrastructure
343.
Assembling low-level tests to high-level symbolic test frames
344.
Assertion checking with PSL and high-level decision diagrams
345.
Assessment of mechanically mixed layer developed during high temperature erosion of cermets
346.
Assessment of transmission network voltage unbalance in connection of high-speed electrical railway connection
347.
Association of Longitudinal High-Sensitivity Troponin T with mortality in patients with chronic kidney disease
348.
Atomic layer deposition of high-k dielectrics on carbon nanoparticles
349.
At-speed self-testing of high-performance pipe-lined processing architectures [Electronic resource]
350.
Automated correction of design errors by edge redirection on high-level decision diagrams
351.
Automated design error debug using high-level decision diagrams and mutation operators
352.
Automated test bench generation for high-level synthesis flow ABELITE
353.
Automated test program synthesis for digital systems with high-level decision diagrams
354.
Automatic code generation for embedded systems from high-level models
355.
Autonomous vehicle safety evaluation through a high-fidelity simulation approach
356.
Back-tracing and event-driven techniques in high-level simulation with decision diagrams
357.
Behavior of wooden based insulations at high temperatures
358.
Behaviour of high carbonate content fuel in PF and FBC conditions
359.
Behaviour of tungsten alloy with iron and nickel under repeated high temperature plasma pulses
360.
Behaviour of uremic toxins and UV absorbance in respect to low and high flux dialyzers
361.
Bidirectional isolated ZVS DC-DC converter with auxiliary active switch for high-power energy storage applications
362.
BRCA1 mutations in Estonian high risk breast and ovarian cancer families
363.
Canonical representations of high-level decision diagrams
364.
Capillary zone electrophoresis of phenol and methylphenols at high pH in metanol
365.
Case studies related to power quality problems caused by high-power electrical arc furnaces
366.
Cell-level power supply for high-voltage modular multilevel converters [Electronic resource]
367.
Characterization of sediment pore-water dissolved organic matter of lakes by high performance size exclusion chromatography
368.
Characterization of sediment pore-water dissolved organic matter of lakes by high-performance size exclusion chromatography
369.
Charging of high power pulse capacitors from resonant converter of alternating parallel and series resonance
370.
Cheap euro keeps prices high at gas stations [Online resources]
371.
Chemistry and materials science - high level learning via research and practical training
372.
Code coverage analysis for concurrent programming languages using high-level decision diagrams
373.
Code coverage analysis on high level decision diagrams
374.
Code coverage analysis using high-level decision diagrams [Electronic resource]
375.
Combined biological treatment of high-sulphate wastewater from yeast production
376.
Combined FE and particle swarm algorithm for optimization of high speed PM synchronous machine
377.
Comparative analysis of high power density bidirectional DC-DC converters for portable energy storage applications
378.
Comparative characteristics of diffusion-welded high-voltage stacks and connected in series Schottky diodes
379.
Comparison of GaAs based high voltage diode stacks
380.
Comparison of soft switching methods of DC-AC full bridge high-frequency link converter
381.
Complex simulation of punchthrough, tunneling and high-speed characteristics of scaled bipolar devices and circuits
382.
Comprehensive analysis of proteolysis during 8 months of ripening of high-cooked Old Saare cheese
383.
Computer aided modeling of high frequency power M-S structures
384.
Conducting polyparaphenylene prepared by high temperature doping
385.
Constant phase element response of impedance spectra of high vacuum evaporated CuIn3Se5 photoabsorber layers [Eectronic resource]
386.
Controlled bidirectional DC circuit breaker with zero negative current for high load shift applications
387.
Controller synthesis in control and memory centric high level synthesis system
388.
Cooling methods for high voltage IGBTs
389.
Cooling methods for high-power electronic systems
390.
Correct reuse of complex design units during high level synthesis : verification issues
391.
Correction of the short-term forecast of high-voltage power consumption
392.
Crack formation and control in an AlCoCrFeNi high entropy alloy fabricated by selective laser melting
393.
Crest-trough asymmetry of waves generated by high-speed ferries
394.
Crystallisation behaviour of bimodal blends of high-density polyethylene
395.
Crystallisation behaviour of high density polyethylene blends with bimodal molar mass distribution
396.
Crystallization behavior of some unimodal and bimodal linear low-density polyethylenes at moderate and high supercooling
397.
Crystallization of multimodal polyethylene at high cooling rates by combined sals and ultrafast calorimetry methods
398.
Cubic iron core-shell nanoparticles functionalized to obtain high-performance MRI contrast agents
399.
Cubic Iron Core–Shell Nanoparticles Functionalized to Obtain High-Performance MRI Contrast Agents
400.
Culturally-sensitive cybersecurity awareness program design for Iranian high-school students
401.
Cycle-based simulation algorithms for digital systems using high-level decision diagrams
402.
Decomposition-oriented extraction of the control path from high-level behavioral descriptions
403.
Dependability evaluation in fault-tolerant systems with high-level decision diagrams
404.
Design of high frequency transformer for isolated bridge-type PFC converter
405.
Design of high-frequency transient current sensor for powerline on-line measurement
406.
Determination of high frequency parameters of an induction motor drive
407.
Development and verification of control and protection algorithms for the special purpose high power converters
408.
Development of 50-kW isolated DC/DC converter with high-voltage IGBTs
409.
Development of 50-kW isolated DC/DC converter with high-voltage IGBTs [Electronic resource]
410.
Development of cemented carbides with high chromium iron alloy binder = Kõrge kroomisisaldusega rauasulamsideainega kõvasulamite arendus
411.
Development of high definition protein from cheese whey
412.
Development of high fidelity liver and kidney phantom organs for use with robotic surgical systems
413.
Development of methodology and equipment for studying crystallization behaviour of novel PE materials at high supercooling
414.
Development of solid lubricated composites for high-temperature tribological applications = Tahkmäärdega komposiitide väljatöötamine kõrgtemperatuurseteks triborakendusteks
415.
Diagnostic modeling of digital systems with low- and high-level decision diagrams
416.
Diagnostic modeling of microprocessors with high-level decision diagrams
417.
Diagnostic modelling of digital systems with binary and high-level decision diagrams
418.
Digital current mode control algorithms for high-power half-bridge DC/DC converters
419.
Digitalization of high speed craft design and operation challenges and opportunities
420.
Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
421.
Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
422.
Does high-speed railway influence convergence of urban-rural income gap in China?
423.
Downward continuation of airborne gravity data using high-resolution global geopotential models
424.
Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools
425.
Drinking water production from well water with high sulfur and sulfur bacteria content
426.
Dry sliding wear of cermets under high-speed conditions
427.
EDLC durable electrodes and capacitor for high frequency applications
428.
Efect of ozonation on the thermal behaviour and morphology state of high-density polyethylene
429.
Effect of alkylsulfonate on thermal behavior and structure of high-density polyethylene
430.
Effect of FeNiCrBSiC–MeB2 material composition on the oxidation behavior at high temperatures
431.
Effect of graphite deposition on heat transfer in high-temperature helium flow
432.
Effect of imperfect CSI on interference alignment in multiple-high altitude platforms based communication
433.
Effect of pulsed deuterium plasma irradiation on dual-phase tungsten high-entropy alloys
434.
Effect of solvent treatment on crystallisation behaviour of high-density polyethylene
435.
Electric vehicle fast charger high voltage input multiport converter topology analysis [Electronic resource]
436.
Electro-deposited nano-Ni/reduced graphene oxide composite film of corrugated surface for high voltammetric sensitivity
437.
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
438.
EMC considerations on PCB design for a high-power converter control system [Electronic resource]
439.
EMI problems of current measurements in inverters with high switching frequency
440.
EMI problems of current measurements in inverters with high switching frequency [Electronic resource]
441.
EMI problems of the high frequency 3-phase rectifier
442.
Employees' psychological characteristics and sustainable leadership in firms with high and low entrepreneurial orientation
443.
Energy-efficient high-voltage switch based on parallel connection of IGBT and IGCT [Electronic resource]
444.
Enhanced mobility of high-frequency discrete breathers in a monatomic chain with odd anharmonicity
445.
Enhancement of Unmanned Aerial Vehicle photogrammetry by high-resolution airborne laser scanning data [Electronic resource]
446.
Enzymatic synthesis and polymerization of isosorbide-based monomethacrylates for high-Tg plastics
447.
Erosion testing of refractory cermets at high temperature [Electronic resource]
448.
Evaluation of different loss calculation methods for high-voltage IGBT-s under small load conditions
449.
Evaluation of GaN HEMTs for high-voltage stage of isolated DC-DC converters
450.
Evaluation of high performance aluminum for microwave filters
451.
Evaluation of high power factor three-phase diode rectifiers with parallel-resonant input filters
452.
Evaluation of low- and high-voltage GaN transistors in soft-switching DC-DC converter
453.
Event driven method for transient simulation of high frequency digital circuits
454.
Evolution of microstructure and hardness in aluminum processed by high pressure torsion extrusion
455.
Evolution of TiN coating surface roughness during physical vapor deposition on high speed steel substrate
456.
Experimental Investigation of high frequency 3L-NPC qZS inverter for photovoltaic application
457.
Experimental investigation of the high-speed combustion of different oil shales
458.
Experimental prototype of high-efficiency wind turbine based on Magnus effect
459.
Experimental setup for testing and mapping of high temperature abrasion and oxidation synergy
460.
Experimental study of high step-up quasi-Z-source DC-DC converter with synchronous rectification
461.
Experimental study of the high speed ultrasonic time-of-flight to digit converter
462.
Exploiting high-level descriptions for circuits fault tolerance assessments
463.
Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
464.
Fault detection and protection system for the power converters with high-voltage IGBTs [Electronic resource]
465.
Fault effect reasoning in digital systems by topological view on low- and high-level decision diagrams
466.
Fault modeling and test generation with low- and high-level decision diagrams
467.
Fault tolerant control of a grid-connected microgrid with high penetration of renewable energy
468.
Fault-tolerant high step-up DC-DC converters
469.
Feed-forward neural networks for smooth operation of the high-voltage power transmission network
470.
Floating high step-down stacked dc-dc converter based on buck-boost cells [Electronic resource]
471.
Formalization of finite state machines with data path for the verification of high-level synthesis
472.
Fouling and heat effectiveness of convective heat surface on high temperature helium flow
473.
Full soft-switching high step-up current-fed DC-DC converters with reduced conduction losses
474.
Full soft-switching high step-up DC-DC converter for photovoltaic applications
475.
Functional self-test of high-performance pipe-lined signal processing architectures
476.
GaAs based diffusion welded high voltage diode stacks [Electronic resource]
477.
Gas-solid particle flow in horizontal channels at high mass loadings [Electronic resource]
478.
Half-bridge trans-Z-source inverter with high boost factor
479.
Harmonic suppression in high power DC controlled reactors for AC power transmission lines
480.
High accuracy filter transmission measurement for determination of the detection efficiency calibration of Si-SPAD detectors
481.
High ambient radiofrequency radiation in Stockholm city, Sweden
482.
High definition gelling agent from the local seaweed
483.
High efficiency cell-free protein biosynthesis
484.
High efficient photovoltaics in Estonia
485.
High energy milling of WС-FeСr cemented carbide
486.
High frequency intrinsic localized modes in solids: an example of metallic Ni
487.
High level decision diagrams and characteristic polynomials
488.
High level fault modeling in digital systems
489.
High order iterative methods for decomposition-coordination problems
490.
High order iterative methods for problems in mathematical modelling
491.
High performance GaAs power diodes
492.
High performance workplace design model
493.
High phonon-drag thermoelectric efficiency of SiC at low temperatures
494.
High photosensitivity monograin materials and devices
495.
High power DC controlled reactor for AC power transmission lines
496.
High power factor AC-DC line-frequency resonant converter for deeply varying loads
497.
High power factor converter for normalizing flicker of arc furnaces
498.
High power factor rectifiers for DC arc furnaces
499.
High power saturable reactors for AC power transmission lines
500.
High quality LPE GaAs power diodes with DLTS method
501.
High quality metal ceramic interfaces using diffusion welding technology
502.
High quality test generation for digital systems
503.
High reliability leadership : a conceptual framework
504.
High resolution multi-beam sonar [Electronic resource]
505.
High school students' acquisition of knowledge and skills through self-organization and collaboration
506.
High school students' acquisition of knowledge and skills through web-based collaboration
507.
High selective oil shale mining
508.
High speed data preprocessing for bioimpedance measurements : architectural exploration
509.
High strength ductile aluminium matrix composite = Kõrgtugev ja plastne alumiiniumkomposiitmaterjal
510.
High strength steel behaviour during hot dip galvanizing
511.
High temperature adsorption of sulphur dioxide
512.
High temperature antistructure disorder in undoped ZnS
513.
High temperature behavior of NiO-based oxygen carriers for chemical looping combustion
514.
High temperature conductivity and F-centres in ZnS
515.
High temperature conductivity and phase transitions of solid solutions CdSexTe1-x
516.
High temperature conductivity in the Cu solubility limit range in ZnS:Cu
517.
High temperature conductivity in the phase transition region
518.
High temperature corrosion and abrasive wear of boiler steels = Katlaterase kõrgtemperatuurse korrosiooni- ja kulumisuuringud
519.
High temperature corrosion of boiler steels in hydrochloric atmosphere under oil shale ashes
520.
High temperature corrosion of martensite alloy under oil shale fly ash
521.
High temperature corrosion of martensite steel under influence of chlorine
522.
High temperature corrosion resistance of boiler steels in the presence of chlorine-containing on-tube deposits
523.
High temperature cyclic impact/abrasion testing of boiler steels
524.
High temperature defect equilibrium in ZnS:Cu single crystals
525.
High temperature diffusion of halogens and alkali metals into polyparaphenylene
526.
High temperature diffusion of halogens in polyparaphenylene
527.
High temperature doped polyparaphenylene as electrode solutions
528.
High temperature electrical conductivity in Cu-doped ZnS
529.
High temperature electrical conductivity in donor-doped II-VI compounds
530.
High temperature electrical conductivity in Ga and In solubility limit region in ZnS
531.
High temperature electrical conductivity in hydrothermally grown ZnO
532.
High temperature electrical conductivity in ZnS:Al and in CdSe:Al
533.
High temperature electrical conductivity in ZnS:Cu ceramics and in CdSe-CdTe polycrystalline solid solutions
534.
High temperature electrical conductivity in ZnS:Cu:Cl ceramics and in CdSexTe1-x polycrystalline solid solutions
535.
High temperature electrical conductivity in ZnSe:In and in CdSe:In under selenium vapor pressure
536.
High temperature electrical conductivity in the Ag solubility limit region in ZnS and in CdSe
537.
High temperature electrical conductivity in the Cu solubility limit range in ZnS:Cu
538.
High temperature electrical conductivity in the Cu-doped ZnS
539.
High temperature electrical conductivity in the phase transition region
540.
High temperature electrical conductivity in undoped ceramic ZnO
541.
High temperature electrical conductivity of Zn:Cu:Cl ceramic in phase-transition region
542.
High temperature electrical conductivity of undoped ZnS
543.
High temperature erosion of Ti(Mo)C-Ni cermets
544.
High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings
545.
High temperature erosion-corrosion of wear protection materials
546.
High temperature investigation of ZnS:Ga and CdSe:Ga
547.
High temperature oxidation of CoAl(100)
548.
High temperature properties of CdTe crystals, doped by Sb
549.
High temperature tribological performance of adaptive hard nanocomposite coatings deposited on a WC-Co substrate
550.
High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions
551.
High temperature wear of cermet particle reinforced NiCrBSi hardfacing
552.
High vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid PV structures with conductive polymers
553.
High vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid structures
554.
High velocity thermal sprayed coatings from hardmetal powders
555.
High voltage diffusion‐welded stacks on the basis of SiC Schottky diodes
556.
High voltage GaAs diode stacks : the choice of epistructures for assembling
557.
High work ability in the scientific activity of older and experienced academics
558.
High-accuracy eddy current measurements of metals
559.
High-accuracy reference standards for quantitative two-photon absorption spectroscopy = Kõrgtäpsusega standardid kvantitatiivses kahefootonses neeldumisspektroskoopias
560.
High-attenuation tunnel-type detector for calibration of single-photon devices
561.
High-efficiency 312-kVA three-phase inverter using parallel connection of silicon carbide MOSFET power modules
562.
High-efficiency internal combustion engine for unmanned aircraft use
563.
High-efficiency internal combustion engine used in the unmanned aircraft
564.
High-efficiency predictive control of pumping
565.
High-efficiency quad-mode parallel PV power optimizer for DC microgrids
566.
High-efficiency single-stage onboard charger for electrical vehicles
567.
High-energy ball milling of Nd-Fe-B powders
568.
High-energy sources at low radio frequency : the Murchison Widefield Array view of Fermi blazars
569.
High-frequency current sensor for power network on-line mea[s]urements
570.
High-frequency split-bobbin transformer design with adjustable leakage inductance
571.
High-Gain Seven-Level Switched-Capacitor Two-Stage Multi-Level Inverter
572.
High-K ZrO2 thin films by chemical spray pyrolysis method [Online resource]
573.
High-key paljundus
574.
High-level axioms for graphical linear algebra
575.
High-level CERN delegation visiting Estonia [Online resource]
576.
High-level combined deterministic and pseudoexhuastive test generation for RISC processors
577.
High-Level Combined Deterministic and Pseudo-exhuastive Test Generation for RISC Processors
578.
High-level decision diagram based fault models for targeting FSMs
579.
High-Level Decision Diagram manipulations for code coverage analysis
580.
High-level decision diagram simulation for diagnosis and soft-error analysis
581.
High-level decision diagrams based coverage metrics for verification and test
582.
High-level decision diagrams for improving simulation performance of digital systems
583.
High-level design error diagnosis using backtrace on decision diagrams
584.
High-level fault diagnosis in RISC processors with Implementation-Independent Functional Test
585.
High-level functional test generation for microprocessor modules
586.
High-Level Implementation-Independent Functional Software-Based Self-Test for RISC Processors
587.
High-level intellectual property obfuscation via decoy constants
588.
High-level modeling and testing of multiple control faults in digital systems
589.
High-level path activation technique to speed up sequential circuit test generation
590.
High-level specification of games
591.
High-level synthesis and test in the MOSCITO-based virtual laboratory
592.
High-level synthesis of control and memory intensive communication systems
593.
High-level test data generation for software based self-test in microprocessors
594.
High-level test generation for processing elements in many-core systems
595.
High-level test synthesis with hierarchical test generation
596.
High-performance analogue measurement using internal enhanced PWM and ADC of a DSP-chip
597.
High-performance buck-boost partial power quasi-Z-source series resonance converter
598.
High-performance hardware accelerators for sorting and managing priorities
599.
High-performance information processing in distributed computing systems
600.
High-performance size exclusion chromatographic characterisation of dissolved organic matter from seawater using fluorescense detection
601.
High-performance size exclusion chromatography analysis of lake sediment pore-water dissolved organic matter
602.
High-performance size-exclusion chromatographic and spectrometric analysis of dissolved organic matter in lakewater samples
603.
High-Q active bandbass filters
604.
High-Q bandpass filters based on immittance converters
605.
High-quality consistent analysis-synthesis in sinusoidal coding
606.
High-quality organisation and management of urban life
607.
High-resolution ice dynamics in the Gulf of Finland
608.
High-resolution seismic imaging of Paleozoic rocks in the Mora area, Siljan Ring structure, central Sweden
609.
High-resolution trilobite stratigraphy of the Lower–Middle Ordovician Öland Series of Baltoscandia
610.
High‐resolution view on downwelling by underwater gliderin the Eastern Baltic Proper
611.
High-resolution view on the subsurface salinity maxima in the Gulf of Riga
612.
High-sensitive compact laser device for moving particle registration
613.
High-sensitivity compact moving particles detector with an external-cavity laser diode
614.
High-specific strength cermet for production of anti-skid studs
615.
High-speed asynchronous machines
616.
High-speed logic level fault simulation
617.
High-speed matrix processor for embedded systems
618.
High-speed thermogravimetric analysis of the combustion of wood and Ca-rich fuel
619.
High-speed thermogravimetric analysis of the combution of wood and Ca-rich fuel
620.
High-strength aluminum alloy of ultrafine grained by consolidation-ECAP
621.
High-strength fuel pellets made of flour milling and coal slack wastes
622.
High-temperature chlorine corrosion in presence of sulfurcontaining and potassium external deposits
623.
High-temperature conductivity of CdSe and ZnSe in selenium atmosphere
624.
High-temperature conductivity of undoped and copper-doped cadmium selenide
625.
High-temperature conductivity relaxation in undoped CdS and CdSe single crystals
626.
High-temperature corrosion of superheater tubes in oil shale boilers
627.
High-temperature corrosive-erosive wear of boiler tubes
628.
High-temperature doping of polyparaphenylene with halogens
629.
High-temperature electrical conductivity of codoped ZnS and CdSe
630.
High-temperature erosion of Cr3-C2-based cermets
631.
High-temperature erosion of Cr3C2-based cermets [Electronic resource]
632.
High-temperature erosion of Fe-based coatings reinforced with cermet particles
633.
High-temperature liquid metal flowmeters of improved reliability
634.
High-temperature point defects in CdS:Cu
635.
High-temperature self disorder in CuInSe2
636.
High-temperature selfdisorders in CnInSe2
637.
High-temperature tribological performance of Al2O3/a-C:H:Si coating in ambient air
638.
High-temperature wear performance of hBN-added Ni-W composites produced from combustion-synthesized powders
639.
High-throughput pipeline for polydisperse droplet analysis
640.
High-vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid PV structures
641.
High-voltage diffusion‐welded stacks on the basis of SiC Schottky diodes
642.
High-voltage frequency converter with multiprocessor control system
643.
High-voltage half-bridge IGBT inverter [Electronic resource]
644.
High-voltage IGBT based converters for rolling stock : possibilities and challenges
645.
High‐voltage pulse transformer for IOT modulators
646.
High-voltage switch realization possibilities for the 3.0 kV DC fed voltage converters
647.
Holocene rapid climate changes and ice-rafting debris events reflected in high-resolution European charcoal records
648.
How to generate high quality tests for digital systems
649.
Human peripheral blood eosinophils express high levels of the purinergic receptor P2X4
650.
Identification of excitons and biexcitons in Sb2Se3 under high photoluminescence excitation density
651.
Impact of high energy milled activation on the thermal properties of Bulgarian and Estonian natural apatites
652.
Impedance measurement solution based on the high time resolution DSP
653.
Impedance-source inverter-based high-power DC/DC converter for fuel cell applications
654.
Implementation of high-voltage IGBTs in power electronic converters for the rolling stock
655.
Implementation of snubber circuits in power converters with high-voltage IGBTs
656.
Implementation possibilities of SMD capacitors for high power applications
657.
Improved high-power-factor three-phase diode rectifiers using ripple-power re-rectification
658.
Improved high-power-factor three-phase diode rectifiers using ripple-power re-rectification [Electronic resource]
659.
Improved VHDL input for high-level synthesis tool xTractor
660.
Indoor humidity load in dwellings with high occupancy
661.
Induction of resistance mechanisms in Rhodotorula toruloides for growth in sugarcane hydrolysate with high inhibitor content
662.
In-field detection of degradation on PCB assembly high-speed buses
663.
Influence of nickel and chromium contents on the boiler steels high temperature corrosion resistance
664.
Influence of SiO2 on the thermal behavior of high-energy activated natural phosphorites
665.
Insights into the string-barrier interaction dynamics based on high-speed camera measurements
666.
INSL5 is a high affinity specific agonist for GPCR142(GPR100)
667.
Integration of high-level synthesis to the courses on reconfigurable digital systems
668.
Interlock delay time minimization and its impact on the high-voltage half-bridge DC/DC converter
669.
Introducing interlayer electrolytes : toward room-temperature high-potential solid-state rechargeable fluoride ion batteries
670.
Investigation of anaerobic treatment of extremely high concentrated waste in the cheese industry
671.
Investigation of different free image analysis software for high-throughput droplet detection
672.
Investigation of temperature switching stability of AlGaAs/GaAs-based high-voltage subnanosecond optothyristor switch
673.
Investigation of the causes behind the vibrations of a high-speed solid-rotor induction motor
674.
Isolation and chemical treatment procedures for high quality carrageenans
675.
IT-enabled international promotion of technology transfer for high-tech enterprises
676.
Large area high quality interfaces to SiC substrates - technology and modelling
677.
Linear patterning of high entropy alloy by additive manufacturing
678.
Low-carbohydrate high-fat weight reduction diet induces changes in human gut microbiota
679.
Maarja Kruusmaa - transforming nature's design into high tech
680.
Magnetic current sensor stray components in high frequency operation and their effects
681.
Magnetically integrated high step-up resonant DC-DC converter for distributed photovoltaic systems
682.
Measuring crystallization kinetics of high density polyethylene by improved hot-stage polarized light microscopy
683.
Mechanical recycling of electronic wastes by high-energy disintegrator mills
684.
Mechanism for single crystal refinement in high purity niobium during equal-channel angular pressing
685.
Microcontroller control device for high speed control solenoids
686.
Microstructure and high temperature tribological behaviour of self-lubricating Ti-TiBx composite doped with Ni-Bi
687.
Microstructure and nanoindentation creep behavior of binary Al-Cu alloy synthesized at high pressure
688.
Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying
689.
Microstructure and properties that change during hard cyclic visco-plastic deformation of bulk high purity niobium
690.
Middle-frequency isolation transformer design issues for the high-voltage DC/DC converter
691.
MIMO reinforcement learning based approach for frequency support in microgrids with high renewable energy penetration
692.
Minimisation of higher harmonics in high power saturable reactors for AC power transmission lines
693.
Minimization of the high-level fault model for microprocessor control parts [Online resource]
694.
Modeling microprocessor faults on high-level decision diagrams [Electronic resource]
695.
Modeling of a vortex ring flow at high Reynolds number
696.
Modeling of high-concentration gas-particle flow in a horizontal channel
697.
Modeling of long waves from high speed ferries in coastal waters
698.
Modelling of high frequency voltage transients of electrical motors
699.
Modification of closure depths by synchronisation of severe seas and high water levels
700.
Modified high voltage gain soft-switched quasi-switched boost inverter
701.
Multi-cell DC-DC converter with high step-down voltage ratio [Electronic resource]
702.
Multifractal analysis of high-temperature plasma irradiated tungsten surfaces
703.
Multiple control fault testing in digital systems with high-level decision diagrams
704.
Multiple fault testing in systems-on-chip with high-level decision diagrams
705.
Mutation analysis with high-level decision diagrams
706.
Nanoporous carbon-based electrodes for high strain ionomeric bending actuators
707.
Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation
708.
Nanostructural evolution in mesoporous networks using in situ high-speed temperature scanner
709.
Nanostructure and properties study of advanced high purity rare metals
710.
New bi-directional DC/DC converter for supercapacitor interfacing in high-power applications
711.
New fault models and self-test generation for microprocessors using High-Level Decision Diagrams
712.
New high frequency surface fatigue wear tester : design and first results
713.
New high-gain non-inverting buck-boost converter
714.
New high-gain step-up DC/DC converter for a fuel cell interfacing in hydrogen buffer
715.
New high-gain transformerless DC/DC boost converter system
716.
New step-up DC/DC converter with high-frequency isolation
717.
Noise and vibration estimation on the territory near high speed trains railway
718.
Noise pollution problems of high-speed railway St.Petersburg-Moscow
719.
Novel thermochemical metal halide treatment to high-performance Sb2Se3 photocathode
720.
Novel welding of Al0.5CoCrFeNi high-entropy alloy: corrosion behavior
721.
NV-SP: A new high performance and low energy NVM-Based scratch pad
722.
Oil spray cooling with hairpin windings in high-performance electric vehicle motors
723.
On automatic software-based self-test program generation based on high-Level decision diagrams
724.
On evaluation of high frequency channel parameter
725.
On high order iterative methods for nonlinear problems
726.
On high order iterative methods for non-linear problems
727.
On the mass spectrum for some high-spin wave equations
728.
On the solution of nonlinear optimization problems of high dimension
729.
On the solution of nonlinear optimization problems of high dimension [Electronic resource]
730.
Open source hardware cost-effective imaging sensors for high-throughput droplet microfluidic systems
731.
Optical detection methods for high-throughput fluorescent droplet microflow cytometry
732.
Optical properties of high quality Cu2ZnSnSe4 thin films
733.
Optimal condition monitoring of high voltage circuit breakers
734.
Optimization and Design of Planar Transformer for the High Frequency Link Converter
735.
Optimizing ventricular fibers : uniform strain or stress, but not ATP consumption, leads to high efficiency
736.
Output filter for the high-voltage DC/DC converter
737.
Overview about low-level and high-level decision diagrams for diagnostic modeling of digital systems
738.
Overview about low-lewel and high-level decision diagrams for diagnostic modeling of digital systems
739.
Pantograph noise - a sound source relevant to high-speed trains?
740.
Parameters identification and modeling of high-frequency current transducer for partial discharge measurements
741.
Pb and Bi nanoclaster precipitation in high-dose implated and RTA Si: SEM and RHEED analyses
742.
Peculiar high temperature corrosion of martensite alloy under impact of Estonian oil shale fly ash
743.
Performance of polyimide and PTFE based composites under sliding, erosive and high stress abrasive conditions
744.
Photoluminescence study of B-trions in MoS2 monolayers with high density of defects
745.
Physical parameters for a class of high-spin wave equations
746.
Possibilities and limitations of liquid cooling systems for high power converters
747.
Possible high-pressure structures of sulfur trioxide
748.
Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy
749.
Power semiconductor devices for high-current electronic
750.
Prediction of high-frequency intrinsic localized modes in Ni and Nb
751.
Probabilistic equivalence checking based on high-level decision diagrams
752.
Profiles of waves from high-speed ferries in the coastal area of Tallinn Bay
753.
PSL assertion checking using temporally extended high-level decision diagrams
754.
PSL assertion checking with temporally extended high-level decision diagrams
755.
Quartz nonlinear high level signal modelling
756.
Raman spectroscopy of multilayered AlCrN coating under high temperature sliding/oxidation
757.
Reactive carburizing sintering - a novel production method for high quality chromium carbide-nickel cermets
758.
Reactive power control for bidirectional isolated high-frequency link converter
759.
Reactive sintering of (Ti,W)C-Ni and TiC-FeNiSi cermets from high-energy milled powders
760.
Recrystallization of CdTe film under conditions of high temperature and mechanical pressure
761.
Recrystallization of CdTe under conditions of high temperature and pressure
762.
Recycling of reinforced acrylic plastic wastes by high energy mills
763.
Regenerative passive snubber circuit for high-frequency link converters
764.
Research of over-voltages and other high frequency phenomena in long cable AC drives
765.
Research of over-voltages and other high frequency phenomena in long cable AC drives [Electronic resource]
766.
Residential buildings with heat pumps peak power reduction with high performance insulation
767.
Results of measurements in high precision sonar systems
768.
Retreatment of industrial plastic wastes by high energy disintegrator mills
769.
Revolver : a high-performance MIMD architecture for collision free computing
770.
Safety performance in high reliability organizations (I) : the role of leadership
771.
Sandy coast cross-shore profile changes in a high wave energyenvironment, Palanga, Baltic Sea
772.
Sea state in the Baltic Sea from space-borne high-resolution synthetic aperture radar imagery
773.
Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy
774.
Selective laser melting of in-situ CoCrFeMnNi high entropy alloy : effect of remelting
775.
Selective laser melting of TiB2-Ti composite with high content of ceramic phase
776.
Self-adjusting resonant converters and application by high power electrical arc furnaces
777.
Self-Propagating High-Temperature Synthesis of Silicon Carbide Using Reactions Thermokinetic Coupling Approach
778.
Sheppard-Taylor isolated high boost DC-DC converter [Electronic resource]
779.
Shoaling and runup of long waves induced by high-speed ferries in Tallinn Bay
780.
Sidescan sonar with high resolution
781.
Sidescan sonar with high resolution [Electronic resource]
782.
Simulation of digital systems with high-level decision diagrams
783.
Simulation of patterns of wakes from high-speed ferries in Tallinn Bay
784.
Simulation study of high step-up quasi-Z-source DC-DC converter with synchronous rectification
785.
Simulation-based hardware verification with high-level decision diagrams = Simuleerimisel põhinev riistvara verifitseerimine kõrgtaseme otsustusdiagrammidel
786.
Simulation-based verification with APRICOT framework using high-level decision diagrams
787.
Sintering and fouling characterization of ashes with high calcium oxide content
788.
Sintering of high Mn cemented carbides in Mn-rich environment
789.
6.5 kV IGBT switch realization possibilities and their feasibility study for high-power applications
790.
Sliding wear performance of AlCrN coating on TiB2/Ti composites at high temperatures
791.
Software-based self-test generation for microprocessors with high-level decision diagrams
792.
Solid lubrication at high-temperatures—a review
793.
Solid particle erosion behavior of ceramics at high and room temperature
794.
Solidification of Al-xCu alloy under high pressures
795.
Solution combustion synthesis and spark plasma sintering of magnetic high entropy materials
796.
Solution processed high-K oxides for application as gate dielectric layer in thin film transistor
797.
Solving EMI problems of a high-frequency DC-DC converter
798.
Some research aspects of high noise reasons of buses
799.
Spark plasma sintered Nd-Fe-B magnets from high-energy ball milled powders
800.
Spatial mobilities in a ‘high-speed society’
801.
Starting from scratch : rewards of high public office in Estonia
802.
Stroboscopic sampling in comprehensive high-performance liquid chromatography-capillary electrophoresis via a pneumatic sampler
803.
Structure of solar radiation at high latitudes
804.
Study of activating treatment for glass/ITO/CdS/CdTe structures prepared by high vacuum evaporation
805.
Study of high brightness RGB light-emitting diode color control systems
806.
Sub 1-V low noise high PSRR LDO with improved load transient [Electronic resource]
807.
Sulfate-reducing anaerobic ammonium oxidation as a potential treatment method for high nitrogen-content wastewater
808.
Synthesis of high-level decision diagrams for functional test pattern generation
809.
Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion
810.
Temporally extended high-level decision diagrams for PSL assertions simulation
811.
Terahertz spectroscopy of spin excitations in magnetoelectric LiFePO4 in high magnetic fields
812.
The aluminum based composite produced by Self propagating High temperature Synthesis
813.
The binding of polycyclic aromatic compounds to humic acid studied by high performance liquid chromatography
814.
The impedance spectroscopy of CuIn3Se5 photoabsorber films prepared by high vacuum evaporation technique
815.
The impedance spectroscopy of well-oriented CuIn3Se5 films prepared by high vacuum evaporation technique
816.
The influence of chlorine in ash deposits on 12Cr1MoV alloy high temperature corrosion
817.
The investigation of distributed non-quasi-static high-current-density effects in advanced transistors
818.
The kinetics of enzymatic hydrolysis of concentrated sucrose solutions in high conversion case
819.
The kinetics of high temperature doping of the polyparaphenylene
820.
The methodology of high-voltage instrument transformers technical state index assessment
821.
The use of high-resolution bathymetry for circulation modelling in the Gulf of Finland
822.
The wear of PVD coated elements in oscillation motion at high temperature
823.
Thermoreactive polymer composite with high particulate filler content = Suure pulbrilise täiteaine sisaldusega termoreaktiivne polümeerkomposiit
824.
TMS320F28335-based high-accuracy complex network analyzer instrument
825.
tool for model-order reduction of power systems with high penetration of power electronic devices
826.
Torwards high-quality engineering education in Estonia
827.
Toward automatic condition assessment of high-voltage transmission infrastructure using deep learning techniques
828.
Toward high temperature tough ceramics
829.
Towards a high-level programming language for IoT and robotics
830.
Towards artificial intelligence based automatic adaptive response analyzer for high frequency analog BIST
831.
Towards high impact smart cities: a universal architecture based on connected intelligence spaces
832.
Traffic safety comparison of some post-socialist and high-developed countries [Electronic resource]
833.
Transient analysis of high-voltage half-bridge inverter during freewheeling states
834.
TransMem : a memory architecture to support dynamic remapping and parallelism in low power high performance CGRAs
835.
Transparent TiO2 thin films with high photocatalytic activity for indoor air purification
836.
Treatment of high-strength wastewater by Fe2+-activated persulphate and hydrogen peroxide
837.
Tribological properties of nanocrystalline diamond coating at high temperature sliding conductions [Online resource]
838.
Two new high power factor single-phase diode rectifiers using optimum ripple-power conversion [Electronic resource]
839.
2001. International diffusion of high technology : an IT supported training approach [Electronic resource]
840.
Ultra high-pressure spark plasma sintered ZrC-Mo and ZrC-TiC composites
841.
Ultra-High gain modified SCLN based DC-DC converter with reduced device current stress
842.
Ultra-high step-up DC-DC converters based on center-tapped inductors
843.
Unchanged mitochondrial organization and compartmentation of high-energy phosphates in creatine-deficient GAMT(-/-) mouse hearts
844.
Understanding MPSoCs: exploiting memory microarchitectural vulnerabilities of high performance NoC-based MPSoCs
845.
Use of atomic-force microscopy for characterization of silicon, implated with heavy ions at high doses
846.
Use of high resolution sea level measurements for height transfer in the West-Estonian archipelago
847.
Using high-resolution spectral models of gravity anomaly for computing stochastic modifications of Stokes's formula
848.
Using high-resolution tritium profiles to quantify the effects of melt on two Spitsbergen ice cores
849.
Using microcontrollers for high accuracy analogue measurements
850.
Using of ozone in high quality drinking water production
851.
Utilization of Estonian oil shale as high carbonates content fuel
852.
Utilization of high calcium oxide and alkali metal content fuel at the thermal power plants
853.
Utilization of high calcium oxide and alkali metal contentfuel at the thermal power plants
854.
Utilization of high speed steel grinding waste for cutting tools production
855.
Validation of multi-satellite altimetry data utilizing a high-resolution marine geoid for the Baltic Sea
856.
Variability in the properties of long waves generated by high-speed ferries in Tallinn Bay
857.
Variability in the properties of wakes generated by high-speed ferries
858.
Wear resistance of high velocity thermal sprayed coatings
859.
Verification and error correction on High-Level Decision Diagrams
860.
Very high-speed signal rectification using current conveyors
861.
VHDL front-end for high-level synthesis tool xTractor
862.
Wide input voltage range high step-up DC-DC vonverter with fault-tolerant operation capability
863.
Wide-range operation of high step-up DC-DC converters with multimode rectifiers
864.
Voltage gain extension techniques for high step-up galvanically isolated DC-DC converters
865.
Work-cells concept development for high mix low volume market conditions
866.
xTractor : an academic high-level synthesis tool for control and memory intensive applications
võtmesõna
283
1.
high heating rate
2.
heating rate
3.
High-Pressure High-Temperature Spark Plasma Sintering
4.
air heating
5.
ceiling radiant heating
6.
central heating
7.
conservation heating
8.
DHW heating load in educational buildings
9.
DHW heating load in public buildings
10.
dielectric heating
11.
district heating
12.
district heating
13.
district heating and cooling
14.
district heating electrification
15.
district heating networks
16.
domestic hot water (DHW) heating
17.
dynamic heating curve
18.
dynamic operation of heating systems
19.
electric floor heating expenditure cost optimization
20.
energy calculation for air heating
21.
EU heating and cooling strategy
22.
floor heating
23.
floor heating system
24.
fourth generation district heating
25.
heating
26.
heating and cooling energy cost
27.
heating cable
28.
heating curve
29.
heating diagram
30.
heating energy use
31.
heating load
32.
heating need reduction
33.
heating networks
34.
heating plant
35.
heating power
36.
heating sizing
37.
heating system
38.
heating value
39.
Heating, Ventilation, Air Conditioning (HVAC)
40.
heating-induced transition
41.
HVAC (heating, ventilation, and air conditioning)
42.
individual metering of space heating
43.
intermittent heating
44.
joule heating
45.
large-scale district heating system
46.
low temperature district heating
47.
low temperature heating
48.
low-temperature district heating
49.
radiator heating
50.
radiator heating system
51.
resistance heating
52.
resistive heating
53.
self regulating heating
54.
self-heating phenomenon
55.
small district heating networks
56.
space heating
57.
thermoelectric heating
58.
underfloor heating
59.
4GDH (4th generation district heating)
60.
4th generation district heating
61.
5th generation district heating
62.
accident rate
63.
accumulation rate
64.
air change rate
65.
asymmetric exchange rate exposure
66.
basal metabolic rate
67.
bit error rate
68.
Bit Error Rate (BER)
69.
bit-error rate test
70.
business school learning rate dependence on GPD
71.
business school learning rate measurement instrument
72.
carbon accumulation rate
73.
carrier removal rate
74.
charring rate
75.
contamination propagation rate
76.
cooling rate
77.
data rate
78.
DHW Design Flow Rate
79.
drop-out rate
80.
exchange rate
81.
exchange rate changes
82.
exchange rate effect
83.
exchange rate pass-through
84.
exchange rate regime
85.
exchange rate system
86.
excise rate
87.
fermentation rate
88.
fixed exchange rate system
89.
flow rate control
90.
Functional Failure Rate (FFR)
91.
growth rate
92.
gut transit rate
93.
heart rate
94.
heart rate measurements
95.
heart rate recovery
96.
heart rate recovery cardiac activity
97.
heart rate variability
98.
heat release rate
99.
information rate
100.
interest rate margins
101.
interest rate spreads
102.
interest rate twist
103.
Internal Rate of Return (IRR)
104.
learning rate
105.
learning rate dependence on ownership form
106.
learning rate of organization
107.
Mass flow rate
108.
metabolic rate
109.
multi-rate control
110.
nominal exchange rate
111.
numerical rate of convergence
112.
onshore and offshore exchange rate
113.
organizational learning rate dependence on management
114.
organizational learning rate measurement
115.
overexpression of rate-limiting enzymes
116.
oxygen consumption rate
117.
oxygen transmission rate
118.
packet error rate
119.
packet reception rate (PRR)
120.
proportional rate constraint
121.
PRR (packet reception rate)
122.
pulse rate
123.
Quanta emission rate
124.
rate constant
125.
rate constants
126.
rate-corrected QT interval duration
127.
reaction rate
128.
real exchange rate
129.
real exchange rate misalignments
130.
respiratory rate
131.
resting metabolic rate
132.
sampling rate
133.
speaking rate
134.
specific growth rate
135.
specific nitrite oxidation rate
136.
spraying rate
137.
strain rate sensitivity
138.
strain-rate sensitivity
139.
symbol error rate
140.
symbol error rate (SER)
141.
total nitrogen removal rate
142.
two-rate
143.
variable-rate
144.
water flow rate
145.
wear rate
146.
word error rate
147.
work hardening rate
148.
yaw damping rate
149.
Al0.1CoCrFeNi high-entropy alloy
150.
bimodal high-density polyethylene (HDPE) PE100
151.
C. high temperature corrosion
152.
dual-phase high-entropy alow
153.
effect of high bide
154.
eutectic high entropy alloys
155.
high
156.
high boost converter
157.
high context and low context cultures
158.
high cycle fatigue
159.
High Cycling Stability
160.
high efficiency
161.
high electricity consumption
162.
high energy ballmilling
163.
high energy milled activation
164.
high energy milling
165.
high entropy alloy
166.
high entropy alloys
167.
high frequency instability
168.
high frequency link
169.
high frequency link converters
170.
high frequency link DC-AC converter
171.
high gain boost converter (HGBC)
172.
high gain dc/dc converter
173.
High gain step up DC-DC converter
174.
high level DD (HLDD)
175.
high level synthesis
176.
High Performance DSC (HPer DSC)
177.
high performance liquid chromatography (HPLC)
178.
high pressure liquid chromatography procedure
179.
high pressure torsion
180.
High Pressure Torsion Extrusion
181.
high reliability leadership
182.
high reliability management
183.
high reliability organizations
184.
high school
185.
high school student
186.
high schools
187.
high speed craft (HSC)
188.
high speed machining
189.
high speed measurement
190.
high step up/down
191.
high step-down conversion ratio
192.
high step-up
193.
high step-up converters
194.
high step-up power converter
195.
high strength
196.
high surface area carbon
197.
high switching frequency
198.
high tech industries
199.
High technologies park HTP
200.
high technology
201.
high temperature
202.
high temperature corrosion
203.
high temperature fatigue
204.
high temperature impact-abrasion
205.
high temperature tribology
206.
high temperature wear
207.
high temperatures
208.
high throughput sequencing
209.
high voltage
210.
high voltage gain
211.
high voltage power converters
212.
high-cooked cheese
213.
high-density apolipoprotein A
214.
high-energy astrophysics
215.
high-energy ball milling
216.
high-entropy alloy
217.
high‐entropy alloy
218.
high-entropy alloys
219.
high-entropy nanocomposites
220.
high-fidelity simulator
221.
high-frequency data
222.
high-frequency link converter
223.
high-frequency model
224.
high-frequency sensor
225.
high-frequency transformer
226.
high-frequency transformers
227.
high-frequency transients
228.
high-gain non-inverting buck-boost converter
229.
high-intensity interval training
230.
high-level control fault model
231.
high-level control faults
232.
high-level decision diagram
233.
high-level decision diagrams
234.
high-level decision diagrams (HLDD) synthesis
235.
high-level expert group on AI
236.
high-level fault coverage
237.
high-level fault model
238.
high-level fault simulation
239.
high-level functional fault model
240.
High-Level Synthesis (HLS)
241.
high-level synthesis for test
242.
high-level test data generation
243.
high-penetration renewable energy
244.
high-penetration renewable energy sources (RESs)
245.
high-performance computer systems
246.
high-performance computing systems
247.
high-performance computing systems, Information processing
248.
high-performance liquid chromatography
249.
high-performance liquid chromatography-diode array detector-mass spectrometer
250.
high-performance photocathode
251.
high-performance ports
252.
high-precision levelling
253.
high-pressure annealing
254.
high-pressure solidification
255.
high-pressure torsion
256.
high-resolution (HR)-PWM
257.
high-resolution biostratigraphy
258.
high-schools
259.
high-spatial resolution
260.
high-speed
261.
high-speed MAS (magic angle spinning)
262.
high-speed planing crafts
263.
high-speed railway
264.
high-speed serial link test
265.
high-speed temperature scanner
266.
high-speed thermogravimetric analysis
267.
high-strength wastewater
268.
high-Tc superconductors
269.
high-temperature
270.
high-temperature ceramic superconductors
271.
high-temperature differential thermal analysis (HDTA)
272.
high-temperature wear
273.
high-throughput
274.
high-vacuum evaporation
275.
High-voltage techniques
276.
high-κ dielectrics
277.
logic level and high level BDDs
278.
low-context and high-context
279.
self-propagating high temperature synthesized (SHS)
280.
Self-Propagating High-Temperature Synthesis
281.
ultra high
282.
ultra High gain boost converter (UHGBC)
283.
very high-resolution numerical modelling
allikas
33
1.
District Heating/Environment Protection : proceedings of Workshop, August 24-25, 1995, Helsinki
2.
Ogrzewanie i wentylacja w przemysle i rolnictwie = Heating and ventilation in industry and agriculture
3.
Seminar on District Heating and Electricity Cogeneration : 20-21 May 1999, Tallinn, Estonia : proceedings
4.
Seminar on District Heating and Electricity Cogeneration : 20-21 May, 1999, Tallinn : proceedings
5.
Seminar on District Heating and Electricity Cogeneration : 20-21 May, 1999, Tallinn, Estonia : proceedings
6.
Seminar on District Heating and Electricity Cogeneration, 20-21 May, 1999, Tallinn : proceedings
7.
The 11th International Symposium on District Heating and Cooling
8.
Imaging, Multi-Scale and High Contrast Partial Differential Equations : Seoul ICM 2014 Satellite Conference Imaging, Multi-scale and High Contrast PDEs, August 7-9, 2014, Daejeon, Korea
9.
Creep and Fracture in High Temperature Components : April 21-23, 2009, Zurich, Swizerland
10.
Dagstuhl Seminar 9509 : High Integrity Programmable Electronics Systems, February 27-March 03, 1995
11.
High Blood Pressure & Cardiovascular Prevention
12.
High Blood Pressure & Cardiovascular Prevention
13.
High integrity systems
14.
High performance and optimum design of structures and materials
15.
High performance structure and materials. VI
16.
High temperature
17.
High temperature materials and processes
18.
High temperature processes in chemical engineering
19.
HRC : Journal of high resolution chromatography
20.
HSMV 2020 : Proceedings of the 12th Symposium on High Speed Marine Vehicles
21.
International Conference High Speed Vessels : 1st-2nd July 2020, London, UK : papers [Online resource]
22.
International Journal of Self-propagating High-temperature Synthesis
23.
Journal of high energy physics
24.
Performance Management : Designing the High-Performing Organization : 25-27 June 2014, Aarhus, Denmark : conference proceedings
25.
Precambrian high-grade mobile belts : extended abstracts
26.
Proceedings of the IEEE 13th Workshop on RTL and High Level Testing (WRTLT'12)
27.
Rewards for high public office in Europe and North America
28.
Roomvent&Ventilation 2018 : Excellent Indoor Climate and High Performing Ventilation : proceedings
29.
Special Edition of IEEE Transactions on Industrial Electronics on High Power Factor Rectifiers
30.
The Ninth IEEE Workshop on RTL and High Level Testing (WRTLT 2008), Sapporo, Japan
31.
11th International Conference on Solar Energy at High Latitudes NORTHSUN 2007 : abstract book
32.
29th International Symposium on High Performance liquid Phase Separations and Related Techniques
33.
3rd International Probiotic Conference : High Tatras, Slovakia, June 4-7, 2008 : abstract book
kirjastus/väljaandja
2
1.
Federation of European Heating, Ventilation and Air Conditioning Associations
2.
High Education Press