Toggle navigation
Otsi
Publikatsioonid
Profiilid
Registrid
Abi ja info
Switch to English
Intranet
Publikatsioonid
Profiilid
Registrid
Abi ja info
English
Intranet
Andmebaasid
Publikatsioonid
Otsing
Valitud kirjed
0
high temperature (võtmesõna)
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Kõikidelt väljadelt
Autori otsing
Märksõna otsing
Pealkirja otsing
algab
sisaldab
täpne vaste
—
Lisa tingimus
Liitotsing
filter
Tühista
×
teaviku laadid
raamat
..
artikkel ajakirjas
..
artikkel ajalehes
..
artikkel kogumikus
..
dissertatsioon
..
Open Access
..
Teaduspublikatsioon
..
aasta
ilmumisaasta
Toon andmeid..
autor
Toon andmeid..
TTÜ struktuuriüksus
Toon andmeid..
märksõna
Toon andmeid..
seeria-sari
Toon andmeid..
tema kohta
Toon andmeid..
võtmesõna
Toon andmeid..
Kirjeid leitud
18
Vaata veel..
(5/1010)
Ekspordi
ekspordi kõik päringu tulemused
(18)
Salvesta TXT fail
Salvesta PDF fail
prindi
Märgitud kirjetega toimetamiseks ava
valitud kirjed
kuva
Bibliokirje
Lühikirje
reasta
autor kasvavalt
autor kahanevalt
ilmumisaasta kasvavalt
ilmumisaasta kahanevalt
pealkiri kasvavalt
pealkiri kahanevalt
1
artikkel ajakirjas
Annealing of frozen-in defects in ZnO
Nirk, Tiit
;
Lott, Kalju
;
Seeman, Viktor
;
Türn, Leo
;
Viljus, Mart
;
Öpik, Andres
Physica status solidi (c)
2016
/
p. 590-593 : ill
http://dx.doi.org/10.1002/pssc.201510244
artikkel ajakirjas
2
artikkel ajakirjas
Effect of oxidation on erosive wear behaviour of boiler steels
Antonov, Maksim
;
Veinthal, Renno
;
Huttunen-Saarivirta, E.
;
Hussainova, Irina
;
Vallikivi, Ahto
;
Lelis, Martynas
;
Priss, Jelena
Tribology international
2013
/
p. 35-44 : ill
artikkel ajakirjas
3
artikkel ajakirjas
Effect of temperature and load on three-body abrasion of cermets and steel
Antonov, Maksim
;
Hussainova, Irina
;
Veinthal, Renno
;
Pirso, Jüri
Tribology international
2012
/
p. 261-268 : ill
artikkel ajakirjas
4
artikkel ajakirjas
Gate and base drivers for silicon carbide power transistors : an overview
Peftitsis, Dimosthenis
;
Rabkowski, Jacek
IEEE transactions on power electronics
2016
/
p. 7194-7213 : ill
http://dx.doi.org/10.1109/TPEL.2015.2510425
artikkel ajakirjas
5
artikkel ajakirjas
High temperature electrical conductivity in hydrothermally grown ZnO
Lott, Kalju
;
Nirk, Tiit
;
Türn, Leo
;
Shinkarenko, Svetlana
;
Öpik, Andres
Physica status solidi (c)
2014
/
p. 1481-1484 : ill
artikkel ajakirjas
6
artikkel ajakirjas
High temperature erosion-corrosion of wear protection materials
Varga, Markus
;
Rojacz, Harald
;
Widder, Lukas
;
Antonov, Maksim
Journal of Bio- and Tribo-Corrosion
2021
/
art. 87
https://doi.org/10.1007/s40735-021-00504-9
artikkel ajakirjas
7
artikkel ajakirjas
High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions
Podgurski, Vitali
;
Yashin, Maxim
;
Jõgiaas, Taivo
;
Viljus, Mart
;
Alamgir, Asad
;
Danilson, Mati
;
Bogatov, Andrei
Coatings
2020
/
art. 175, 13 p. : ill
https://doi.org/10.3390/coatings10020175
artikkel ajakirjas
8
artikkel ajakirjas
High-temperature erosion of Fe-based coatings reinforced with cermet particles
Surženkov, Andrei
;
Antonov, Maksim
;
Goljandin, Dmitri
;
Kulu, Priit
;
Viljus, Mart
;
Traksmaa, Rainer
;
Mere, Arvo
Surface engineering
2016
/
p. 624-630 : ill
http://dx.doi.org/10.1080/02670844.2016.1145377
artikkel ajakirjas
9
artikkel ajakirjas
High-temperature wear performance of hBN-added Ni-W composites produced from combustion-synthesized powders
Kumar, Rahul, 1993-
;
Aydinyan, Sofiya
;
Ivanov, Roman
;
Liu, Le
;
Antonov, Maksim
;
Hussainova, Irina
Materials
2022
/
art. 1252
https://doi.org/10.3390/ma15031252
artikkel ajakirjas
10
artikkel ajakirjas
Hot sliding wear of 88 wt.% TiB-Ti composite from SHS produced powders
Kumar, Rahul, 1993-
;
Liu, Le
;
Ivanov, Roman
;
Hussainova, Irina
;
Antonov, Maksim
Materials
2021
/
art. 1242
https://doi.org/10.3390/ma14051242
artikkel ajakirjas
11
artikkel ajakirjas
Hot sliding wear of 88 wt.%TiB-Ti composites from SHS produced powders
Kumar, Rahul, 1993-
;
Liu, Le
;
Antonov, Maksim
;
Ivanov, Roman
;
Hussainova, Irina
Materials
2021
/
art. 1242
https://doi.org/10.3390/ma14051242
artikkel ajakirjas
12
artikkel ajakirjas
Microstructure and high temperature tribological behaviour of self-lubricating Ti-TiBx composite doped with Ni-Bi
Kumar, Rahul, 1993-
;
Torres, Hector
;
Aydinyan, Sofiya
;
Antonov, Maksim
;
Varga, Markus
;
RodrIguez Ripoll, Manel
;
Hussainova, Irina
Surface and coatings technology
2022
/
art. 128827
https://doi.org/10.1016/j.surfcoat.2022.128827
artikkel ajakirjas
13
artikkel ajakirjas
Oxidation-abrasion of TiC-based cermets in SiC medium
Antonov, Maksim
;
Hussainova, Irina
;
Kübarsepp, Jakob
;
Traksmaa, Rainer
Wear
2011
/
p. 23-31 : ill
artikkel ajakirjas
14
artikkel kogumikus
Raman spectroscopy of multilayered AlCrN coating under high temperature sliding/oxidation
Baroninš, Janis
;
Antonov, Maksim
;
Raadik, Taavi
;
Hussainova, Irina
;
Bereznev, Sergei
Modern Materials and Manufacturing 2019 : 12th International DAAAM Baltic Conference and 27th International Baltic Conference BALTMATTRIB 2019. Selected, peer reviewed papers from the conference Modern Materials and Manufacturing 2019 (MMM 2019), April 24-26, 2019, Tallinn, Estonia
2019
/
p. 9-14
https://www.scientific.net/KEM.799.9
https://www.ester.ee/record=b5235278*est
http://doi.org/10.4028/www.scientific.net/KEM.799.9
artikkel kogumikus
15
artikkel ajakirjas
Solid lubrication at high-temperatures—a review
Kumar, Rahul, 1993-
;
Hussainova, Irina
;
Rahmani Ahranjani, Ramin
;
Antonov, Maksim
Materials
2022
/
art. 1695
https://doi.org/10.3390/ma15051695
artikkel ajakirjas
16
artikkel ajakirjas
The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating
Antonov, Maksim
;
Afshari, Hosein
;
Baroninš, Janis
;
Adoberg, Eron
;
Raadik, Taavi
;
Hussainova, Irina
Tribology international
2018
/
p. 500-514 : ill
https://doi.org/10.1016/j.triboint.2017.05.035
artikkel ajakirjas
17
artikkel ajakirjas
Tribological behavior of Ni-based self-lubricating claddings containing sulfide of nickel, copper, or bismuth at temperatures up to 600 °C
Kumar, Rahul, 1993-
;
Torres, Hector
;
Aydinyan, Sofiya
;
Antonov, Maksim
;
Varga, Markus
;
Hussainova, Irina
;
RodrIguez Ripoll, Manel
Surface and coatings technology
2023
/
art. 129270, 14 p. : ill
https://doi.org/10.1016/j.surfcoat.2023.129270
artikkel ajakirjas
18
artikkel kogumikus
Wear rate of nanocrystalline diamond coating under high temperature sliding conditions
Yashin, Maxim
;
Baroninš, Janis
;
Menezes, Pradeep
;
Viljus, Mart
;
Raadik, Taavi
;
Bogatov, Andrei
;
Antonov, Maksim
;
Podgurski, Vitali
Materials Engineering 2017 : selected, peer reviewed papers from the 26th International Baltic Conference on Materials Engineering 2017, October 26-27, Kaunas, Lithuania
2017
/
p. 219-223 : ill
http://dx.doi.org/10.4028/www.scientific.net/SSP.267.219
artikkel kogumikus
Kirjeid leitud 18, kuvan
1 - 18
pealkiri
775
1.
High pressure high temperature consolidation of ZrC based ceramic composites
2.
ZrC based ceramics by high pressure high temperature SPS technique
3.
A high temperature corrosion resistance of boiler steels in the presence of chlorine-containing surface deposits
4.
Assessment of mechanically mixed layer developed during high temperature erosion of cermets
5.
Behaviour of tungsten alloy with iron and nickel under repeated high temperature plasma pulses
6.
Conducting polyparaphenylene prepared by high temperature doping
7.
Development of solid lubricated composites for high-temperature tribological applications = Tahkmäärdega komposiitide väljatöötamine kõrgtemperatuurseteks triborakendusteks
8.
Effect of graphite deposition on heat transfer in high-temperature helium flow
9.
Erosion testing of refractory cermets at high temperature [Electronic resource]
10.
Experimental setup for testing and mapping of high temperature abrasion and oxidation synergy
11.
Fouling and heat effectiveness of convective heat surface on high temperature helium flow
12.
High temperature adsorption of sulphur dioxide
13.
High temperature antistructure disorder in undoped ZnS
14.
High temperature behavior of NiO-based oxygen carriers for chemical looping combustion
15.
High temperature conductivity and F-centres in ZnS
16.
High temperature conductivity and phase transitions of solid solutions CdSexTe1-x
17.
High temperature conductivity in the Cu solubility limit range in ZnS:Cu
18.
High temperature conductivity in the phase transition region
19.
High temperature corrosion and abrasive wear of boiler steels = Katlaterase kõrgtemperatuurse korrosiooni- ja kulumisuuringud
20.
High temperature corrosion of boiler heating surfaces metal
21.
High temperature corrosion of boiler steels in hydrochloric atmosphere under oil shale ashes
22.
High temperature corrosion of martensite alloy under oil shale fly ash
23.
High temperature corrosion of martensite steel under influence of chlorine
24.
High temperature corrosion resistance of boiler steels in the presence of chlorine-containing on-tube deposits
25.
High temperature cyclic impact/abrasion testing of boiler steels
26.
High temperature defect equilibrium in ZnS:Cu single crystals
27.
High temperature diffusion of halogens and alkali metals into polyparaphenylene
28.
High temperature diffusion of halogens in polyparaphenylene
29.
High temperature doped polyparaphenylene as electrode solutions
30.
High temperature electrical conductivity in Cu-doped ZnS
31.
High temperature electrical conductivity in donor-doped II-VI compounds
32.
High temperature electrical conductivity in Ga and In solubility limit region in ZnS
33.
High temperature electrical conductivity in hydrothermally grown ZnO
34.
High temperature electrical conductivity in ZnS:Al and in CdSe:Al
35.
High temperature electrical conductivity in ZnS:Cu ceramics and in CdSe-CdTe polycrystalline solid solutions
36.
High temperature electrical conductivity in ZnS:Cu:Cl ceramics and in CdSexTe1-x polycrystalline solid solutions
37.
High temperature electrical conductivity in ZnSe:In and in CdSe:In under selenium vapor pressure
38.
High temperature electrical conductivity in the Ag solubility limit region in ZnS and in CdSe
39.
High temperature electrical conductivity in the Cu solubility limit range in ZnS:Cu
40.
High temperature electrical conductivity in the Cu-doped ZnS
41.
High temperature electrical conductivity in the phase transition region
42.
High temperature electrical conductivity in undoped ceramic ZnO
43.
High temperature electrical conductivity of Zn:Cu:Cl ceramic in phase-transition region
44.
High temperature electrical conductivity of undoped ZnS
45.
High temperature erosion of Ti(Mo)C-Ni cermets
46.
High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings
47.
High temperature erosion-corrosion of wear protection materials
48.
High temperature investigation of ZnS:Ga and CdSe:Ga
49.
High temperature oxidation of CoAl(100)
50.
High temperature properties of CdTe crystals, doped by Sb
51.
High temperature tribological performance of adaptive hard nanocomposite coatings deposited on a WC-Co substrate
52.
High temperature tribological properties of Al2O3/NCD films investigated under ambient air conditions
53.
High temperature wear of cermet particle reinforced NiCrBSi hardfacing
54.
High-temperature chlorine corrosion in presence of sulfurcontaining and potassium external deposits
55.
High-temperature conductivity of CdSe and ZnSe in selenium atmosphere
56.
High-temperature conductivity of undoped and copper-doped cadmium selenide
57.
High-temperature conductivity relaxation in undoped CdS and CdSe single crystals
58.
High-temperature corrosion of superheater tubes in oil shale boilers
59.
High-temperature corrosive-erosive wear of boiler tubes
60.
High-temperature doping of polyparaphenylene with halogens
61.
High-temperature electrical conductivity of codoped ZnS and CdSe
62.
High-temperature erosion of Cr3-C2-based cermets
63.
High-temperature erosion of Cr3C2-based cermets [Electronic resource]
64.
High-temperature erosion of Fe-based coatings reinforced with cermet particles
65.
High-temperature liquid metal flowmeters of improved reliability
66.
High-temperature point defects in CdS:Cu
67.
High-temperature self disorder in CuInSe2
68.
High-temperature selfdisorders in CnInSe2
69.
High-temperature tribological performance of Al2O3/a-C:H:Si coating in ambient air
70.
High-temperature wear performance of hBN-added Ni-W composites produced from combustion-synthesized powders
71.
Influence of nickel and chromium contents on the boiler steels high temperature corrosion resistance
72.
Microstructure and high temperature tribological behaviour of self-lubricating Ti-TiBx composite doped with Ni-Bi
73.
Multifractal analysis of high-temperature plasma irradiated tungsten surfaces
74.
Peculiar high temperature corrosion of martensite alloy under impact of Estonian oil shale fly ash
75.
Raman spectroscopy of multilayered AlCrN coating under high temperature sliding/oxidation
76.
Recrystallization of CdTe film under conditions of high temperature and mechanical pressure
77.
Recrystallization of CdTe under conditions of high temperature and pressure
78.
Self-Propagating High-Temperature Synthesis of Silicon Carbide Using Reactions Thermokinetic Coupling Approach
79.
The aluminum based composite produced by Self propagating High temperature Synthesis
80.
The influence of chlorine in ash deposits on 12Cr1MoV alloy high temperature corrosion
81.
The kinetics of high temperature doping of the polyparaphenylene
82.
The wear of PVD coated elements in oscillation motion at high temperature
83.
Toward high temperature tough ceramics
84.
Tribological properties of nanocrystalline diamond coating at high temperature sliding conductions [Online resource]
85.
Wear rate of nanocrystalline diamond coating under high temperature sliding conditions
86.
Energy cascade connection of a low-temperature district heating network to the return line of a high-temperature district heating network
87.
Adhesion of AlCrN coating deposited on TiB2/Ti composites sinteredby SPS dedicated for high temperature tribological applications
88.
Assessment of metal condition and remaining life of in-service power plant components operating at high temperature = Elektrijaamade kõrgetemperatuursete seadmete metalli seisundi ja jääkressursi hindamine
89.
Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy
90.
Fabrication of Cu-W nanocomposites by integration of self-propagating high-temperature synthesis and hot explosive consolidation technologies
91.
Formation of structure of the CdTe film, recrystallized on Mo/glass substrate under high temperature and mechanical pressure
92.
High temperature corrosion and remaining lifetime assessment of ferritic steel 13CrMo4-4 tubes in a convective superheater of a CFB oil shale boiler
93.
High temperature corrosion resistance of the austenitic steels in the presence of chlorine-containing on-tube deposits
94.
High-temperature corrosion resistance of the austenitic steels in the presence of chlorine-containing on-tube deposits
95.
High-temperature tribological performance of hard multilayer TiN-AlTiN/nACo-CrN/AlCrN-AlCrO-AlTiCrN coating deposited on WC-Co substrate
96.
Influence of Cr, Ti and Zr oxides formation on high temperature sliding of NiAl-based plasma spray coatings
97.
Laboratory investigations of high temperature corrosion of boiler alloys under the impact of Estonian oil shale ash
98.
Laboratory tests of high-temperature corrosion of steels B-407, X8CrNiNb1613 and X8CrNiMoNb1616 under impact of ash formed at pulverized firing of oil shale
99.
Microstructural investigation of ni-based high temperature self-lubricating laser claddings containing sulfides of nickel, copper or bismuth
100.
Reactivity of oil shale ashes towards sulfur dioxide. 1, Activation of high-temperature ashes
101.
Some features of theory and calculations of the high temperature magnetohydrodynamic (MHD) devices with rotating magnetic field
102.
ZrC-based and ZrC-doped composites for high-temperature and wear applications = ZrC baasil ja ZrC-ga legeeritud komposiitmaterjalid rakendusteks kõrgtemperatuursetes ja kulumistingimustes
103.
The use of high-temperature superconducting cuprate as a dopant to the negative electrode in Ni-Zn batteries
104.
Verification of new 1000 [degree] C tester designed for investigation of wear-corrosion properties of advanced materials for high temperature applications
105.
Introducing interlayer electrolytes : toward room-temperature high-potential solid-state rechargeable fluoride ion batteries
106.
Investigation of temperature switching stability of AlGaAs/GaAs-based high-voltage subnanosecond optothyristor switch
107.
Nanostructural evolution in mesoporous networks using in situ high-speed temperature scanner
108.
Solid particle erosion behavior of ceramics at high and room temperature
109.
Specific nitrite oxidation rate on high surfaced biofilm carriers dependent on free ammonia and temperature
110.
Research of specific nitrite oxidation rate on high surfaced biofilms carriers with free ammonia and temperature variations
111.
Test setup for measuring medium voltage power cable and joint temperature in high current tests using thermocouples [Online resource]
112.
Behavior of wooden based insulations at high temperatures
113.
Effect of FeNiCrBSiC–MeB2 material composition on the oxidation behavior at high temperatures
114.
High phonon-drag thermoelectric efficiency of SiC at low temperatures
115.
Sliding wear performance of AlCrN coating on TiB2/Ti composites at high temperatures
116.
Solid lubrication at high-temperatures—a review
117.
Comparison of satellite sea surface temperature with in situ surface layer temperature
118.
Vertical temperature gradient and operative temperature with three heating systems in a low-energy building
119.
High gain DC-AC high-frequency link inverter with improved quasi-resonant modulation
120.
High-entropy eutectic composites with high strength and low Young's modulus
121.
Isolated high-frequency link PFC rectifier with high step-down factor and reduced energy circulation
122.
Multiphysic Analysis of High Power Microwave Filter Using High Performance Aluminium Alloy
123.
Multi-type dislocation substructure evolution in a high-strength and ductile duplex high-entropy nanocomposites
124.
New high-gain step-up DC/DC converter with high-frequency isolation
125.
Output rectifier for the high-voltage high-frequency isolated DC/DC converter
126.
Overcoming EMI problems in the high-power high-frequency DC/DC converters - a case study
127.
Prediction of semiconductor losses in a high-power high-voltage DC/DC converter
128.
Scintillators for high efficiency and high spatial resolution in - ray imaging applications
129.
Keevitus [Võrguteavik] : juhised eelkuumutustemperatuuri, läbimitevahelise temperatuuri ja eelkuumutuse hoidmistemperatuuri mõõtmiseks = Welding : guidance on the measurement of preheating temperature, interpass temperat
130.
Radiator and floor heating operative temperature and temperature variation corrections for EN 15316-2 heat emission standard
131.
Temperatuurimeerikud temperatuuritundlike kaupade transpordil, ladustamisel ja levitamisel [Võrguteavik] : katsed, toimimine, sobivus = Temperature records forthe transport, storage and distribution of temperature sensit
132.
A research project on the temperature and humidity conditions, ventilation and airtightness of Finnish detached houses
133.
About thermal low-temperature processing of oil shale by solid heat carrier method
134.
Acidic dissolution of magnetite: experimental study on the effects of acid concentration and temperature
135.
Advances in room temperature fluoride-ion batteries
136.
ALD applied to conformal rare-earth coating of ZnO nanoparticles for low temperature thermal imaging applications
137.
Analysis of building sensor data to explain the experienced indoor room temperature
138.
Analysis of torque distribution in ball-screw mechanisms under extreme temperature conditions
139.
Annual variation of air-water temperature difference at three Estonian coastal stations
140.
Assimilation of observed sea surface temperature and salinity, using subregional EOF patterns from models
141.
Behaviour of the very-low-temperature crystallization peak of linear low-density polyethylene
142.
Cascade sub-low temperature district heating networks in existing district heating systems
143.
Characteristics and inter-annual changes in temperature, salinity and density distribution in the Gulf of Riga
144.
Chiral hemicucurbit[8]uril complexation with anionic guests : an NMR titration and variable temperature NMR study
145.
Comparison of deep learning models for multivariate prediction of time series wind power generation and temperature
146.
Compensation of the baseline temperature fluctuations for autonomous CE–C4D instrument working in harsh environments
147.
Computation of the temperature field in the furnace of aluminothermal reduction
148.
Constructive role of temperature in ratchets driven by trichotomous noise
149.
Contact temperature distribution between sliding bodies
150.
Critical values for the temperature factor to assess thermal bridges
151.
Dehydration of AlPO4-34 studied by variable-temperature NMR, XRD and first-principles calculations
152.
Development of room temperature secondary fluoride ion batteries = Toatemperatuursete fluoriidioon akude väljaarendamine
153.
Development of temperature control solutions for non-instrumented nucleic acid amplification tests (NINAAT)
154.
Double temperature-enhanced occupancy of metastable states in fluctuating bistable potentials
155.
Eddy current electrical conductivity measurements for temperature measurements
156.
Effect of different temperature-time combinations in kerogen pyrolysis to thermobitumen and oil
157.
Effect of temperature and load on three-body abrasion of cermets and steel
158.
Effect of temperature on erosive and abrasive wear of carbide reinforced powder steels
159.
Effect of temperature on sliding and erosive wear of fiber reinforced polyimide hybrids
160.
Effect of temperature on the equilibrium in system apatite - SO2 (thermodynamical calculations)
161.
Effect of the growth temperature on chemical composition of spray-deposited CuInS2 thin films
162.
Effects of selenisation temperature on photoluminescence andphotoluminescence excitation spectra of ZnO/CdS/Cu2ZnSnSe4/Mo/glass
163.
Elevated temperature wear of chromium carbide based cermets
164.
Enhanced passivity of austenitic AISI 304 stainless steel by low-temperature ion nitriding
165.
Experimental analysis of cross-laminated timber rib panels at normal temperature and in fire
166.
Formation of thermobitumen from oil shale by low-temperature pyrolysis in an autoclave
167.
Guyer-Krumhansl-type heat conduction at room temperature
168.
Heating system return temperature effect on heat pump performance
169.
Humidity and temperature data logger
170.
Identification, implementation and simulation of ground source heat pump with ground temperature modeling
171.
Impact of the selenisation temperature on the structural and optical properties of CZTSe absorbers
172.
Indoor temperature and humidity conditions and the performance of ventilation in 27 detached houses
173.
Indoor temperature and humidity conditions in Finnish dwellings [Electronic resource]
174.
Indoor temperature and humidity conditions in modern Estonian apartment buildings
175.
Indoor temperature and humidity load in Finnish detached houses
176.
Indoor temperature conditions and energy demand of a Finnish detached house in a changing climate
177.
Influence of gelation temperature on the properties of sol-gel-derived calcium hydroxyapatite ceramics
178.
Influence of particle impact conditions and temperature on erosion–oxidation of steels at elevated temperatures
179.
Influence of temperature and medium on substituent effects in alkaline hydrolysis of phenyl benzoates
180.
Influence of temperature on the phototoxicity of hematoporphyrin derivative (HPD) towards tumor cells
181.
Influence of the end-temperature on the oil shale fast pyrolysis process and its products
182.
Influence of unpacking temperature on tensile strength of PA12 parts manufactured by SLS
183.
Intensification of low-temperature oxidation of low-density polyethylene be gas flame
184.
Inter-annual changes in temperature, salinity and density distribution in the Gulf of Riga
185.
Investigation of charge carrier lifetime temperature-dependence in 4H-SiC diodes
186.
Isothermal and two-temperature zone selenization of Mo layers
187.
Kinetics of kukersite low-temperature pyrolysis in autoclaves
188.
Kinetics of low-temperature retorting of kukersite oil shale
189.
Laser powder-bed fusion of Mo(Si,Al)2 – based composite for elevated temperature applications
190.
Low temperature air-annealing of Cu(InGa)Se2 single crystals
191.
Low temperature crystallization peak in Ziegler-Natta and single site based ethylene/a-olefin composites
192.
Low temperature pyrolysis of graptolite argillite (Dictyonema shale) in autoclaves
193.
Low temperature radiator heating distribution and emission efficiency in residential buildings
194.
Low temperature radiator heating system detailed dynamic simulation - distribution and emission efficiency
195.
Low temperature synthesized WC and its usability for fine-grained hardmetal
196.
Low temperature time resolved photoluminescence in ordered and disordered Cu2ZnSnS4 single crystals
197.
Low temperature, spark plasma sintering behavior of zirconia added by a novel type of alumina nanofibers
198.
Low-temperature annealing of lightly doped n-4H-SiC layers after irradiation with fast electrons
199.
Low-temperature oxidation of polyethylene
200.
Low-temperature oxidation of unstabilized low-density polyethylene
201.
Low-temperature supercritical conversion of Kukersite oil shale
202.
Low-temperature synthesis of ZnO layers assisted by chemical processes
203.
Low-temperature transition of bioaragonite of Tapes decussatus linnaeus (mollusca: bivalvia) [Electronic resource]
204.
Management study of low-temperature water in the urban environment as a potential thermal-energy source
205.
Measurement of charge carrier lifetime temperature-dependence in 4H-SiC power diodes
206.
Measurements of charge carrier lifetime temperature dependence in 4H-SiC power diodes
207.
Measuring temperature and water content in road structures with sensor equipped RFID tags
208.
Metal oxide nanoparticles embedded in rare-earth matrix for low temperature thermal imaging applications
209.
Modification of the optoelectronic properties of Cu2CdSnS4 through low-temperature annealing
210.
Multiple noise-enhanced stability versus temperature in asymmetric bistable potentials
211.
On temperature balancing in lightning [i.e. lighting] devices
212.
On temperature transfer in lighting devices
213.
Optimal PI control parameters for accurate underfloor heating temperature control
214.
Potential fluctuations in Cu2ZnSnSe4 solar cells studied by temperature dependence of quantum efficiency curves
215.
Recommendation for temperature calibration of fast scanning calorimeters (FSCs) for sample mass and scan rate
216.
Recycling of outworn tyres by grinding at normal temperature
217.
review of low-temperature sub-networks in existing district heating networks : examples, conditions, replicability
218.
Room temperature ferromagnetism in Ca and Mg stabilized cubic zirconia bulk samples and their thin films
219.
Room temperature ionic liquids as background electrolyte additives in capillary elecrophoretic separations
220.
Room temperature sensitivity of Ta doped nanocrystalline ZnO films to NH3 exposure
221.
Sea surface temperature variations in the south-eastern BalticSea in 1960–2015
222.
Self-lubricating materials for extreme temperature tribo-applications
223.
Sensitivity of ZnO films doped with Er, Ta and Co to NH3 at room temperature
224.
Short-term tests on firing oil shale fuel applying low-temperature vortex technology
225.
Simulation of breast tissues temperature measurement using Dicke radiometer by FDTD method
226.
Simulation of charge transfer in CCDs for low temperature applications
227.
Simulation of microwave radiometric temperature measurement inside biological tissues using FDTD method
228.
Sliding wear of composite stainless steel hardfacing under room and elevated temperature
229.
Small low-temperature district heating network development prospects
230.
Solvent swelling of Dictyonema oil shale : low temperature heat-treatment caused changes in swelling extent
231.
Solvent swelling of Estonian oil shales : low temperature termochemical conversion caused changes in swelling
232.
Spark plasma sintered ZrC-Mo cermets : influence of temperature and compaction pressure
233.
Spatial distribution and temporal changes in river water temperature in the Baltic States
234.
Spheroidization of quartz powder in a low temperature plasma jet
235.
Start-up of low-temperature anammox in UASB from mesophilic yeast factory anaerobic tank inoculum
236.
Statistics of different public forecast products of temperature and precipitation in Estonia
237.
Strained condition diagnosis and fatigue life prediction for metals under cyclic temperature oscillations
238.
Study of very low temperature crystallization process in ethylene/[alpha]-olefin copolymers
239.
Temperature and pressure dependence of density of a shale oil and derived thermodynamic properties
240.
Temperature calibration and Annual performance of cooling for ceiling panels
241.
Temperature changes accompanying signal propagation in axons
242.
Temperature conditions and slagging tendency in the combustion chamber of pulverized fuel equipment
243.
Temperature dependence of conductivity for polyparaphenylene
244.
Temperature dependence of Cu2ZnSn(SexS1-x)4 monograin solar cells
245.
Temperature dependency of electrical network load
246.
Temperature dependent current transport properties in Cu<sub>2</sub>ZnSnS<sub>4</sub> solar cells
247.
Temperature dependent electrical properties of kesterite monograin layer solar cells = Kesteriitsete monoterakihiliste päikesepatareide elektriliste omaduste temperatuursõltuvused
248.
Temperature dependent electroreflectance study of CdTe solar cells
249.
Temperature dependent electroreflectance study of Cu<sub>2</sub>ZnSnSe<sub>4</sub> solar cells
250.
Temperature dependent photoreflectance study of Cu2SnS3 thin films produced by pulsed laser deposition
251.
Temperature distribution and ventilation in large industrial halls
252.
Temperature extremes and detection of heat and cold waves at three sites in Estonia
253.
Temperature influence on current suppressing effect in SiC Schottky diode
254.
Temperature profile in tube wall by rapid water quenching
255.
Temperature, humidity and wind from Estonian and Finnish radiosonde data (1993-2009)
256.
Temperature-dependent conductivity of polyparaphenylene/polypyrrole multilayer structures
257.
Temperature-dependent photoreflectance of SnS crystals
258.
Temperature-induced changes in chrystal lattice of bioaragonite of Tapes decussatus linnaeus (mollusca: Bivalvia)
259.
Temperature-resolved photoluminescence studies of CuInSe2
260.
The chemosorption process forced by the oscillating temperature
261.
The effect of exhaust air heat pump on district heat energy use and return temperature
262.
The effect of growth temperature and spraying rate on the properties of ZnO:In films
263.
The effect of prestressing and temperature on tensile strength of basalt fiber-reinforced plywood
264.
The effect of temperature and humidity on the permanence of external thermal insulation composite systems
265.
The effect of the district heating return temperature reduction on flue gas condenser efficiency
266.
The effect of the firing temperature on the hardness of alumina porcelain
267.
The influence of energy renovation on the change of indoor temperature and energy use
268.
The influence of sintering temperature of reactive sintered (Ti, Mo)C-Ni cermets
269.
The influence of temperature and gas composition on the sintering of Estonian oil shale ash
270.
Thermobituminizing kinetics of Estonian oil shale at low-temperature pyrolysis
271.
Thermomechanical effects on the wear behavior of cermets : flash temperature
272.
Traceability of temperature measurements in Estonia
273.
Utilization of used tyres by grinding at normal temperature
274.
Validation of climate model-inferred regional temperature change for late-glacial Europe
275.
Variability in temperature, precipitation and river discharge in the Baltic States
276.
Wind-forced variability of vertical structure of temperature and salinity fields in the Gulf of Finland
277.
Young’s modulus of illitic clay in the temperature region of quartz transition
278.
Comparison of 2- and 3-level Half-Bridge DC/DC converters for high-voltage high-power applications
279.
Comparison of control methods for high-voltage high-power three-level half-bridge DC/DC converters [Electronic resource]
280.
Evaluation of different high-voltage switch solutions for high-power converters used in rolling stock [Electronic resource]
281.
Evaluative analysis of 2- and 3-level DC/DC converters for high-voltage high-power applications [Electronic resource]
282.
Feasibility study of half- and full-bridge isolated DC/DC converters in high-voltage high-power applications
283.
Feasibility study of half- and full-bridge isolated DC/DC converters in high-voltage high-power applications [Electronic resource]
284.
High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
285.
High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering
286.
Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
287.
Mechanical properties and self-healing capacity of ultra high performance fibre reinforced concrete with alumina nano-fibres : tailoring ultra high durability concrete for aggressive exposure scenarios
288.
Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
289.
Research and development of digital control systems and algorithms for high power, high voltage isolated DC/DC converters = Võimsate kõrgepingeliste alalisvoolumuundurite arvjuhtimissüsteemide ja -algoritmide uurimine ni
290.
Research and development of high-power high-voltage DC/DC converters = Võimsate kõrgepingeliste alalispingemuundurite uurimine ja välmimine
291.
Some design considerations for high-power high-voltage DC/DC converter with improved power density and efficiency
292.
The effect of modality on linear low-density polyethylene crystallization behaviour at high and very high supercoolings
293.
A global methodology for test program generation starting from high level specifications
294.
A high-frequency small-geometry MOSFET model
295.
A high-performance MEMRISTOR-based Smith-Waterman DNA sequence alignment using FPNI structure
296.
A High-performance open-source finite element analysis library for magnetics in MATLAB
297.
A low voltage high input bandwidth downconversion mixer
298.
A model for high Reynolds number vortex rings
299.
A MPPT control method for full soft-switching high step-up current-fed DC-DC converter
300.
A new high power factor single-phase diode rectifier with optimum ripple-power conversion
301.
A new high step-up switched-capacitor/inductor based DC-DC converter
302.
A new high-power DC/DC converter for residential fuel cell power systems [Electronic resource]
303.
A new type of compact silencer for high requency noise
304.
A novel extendable high gain step up DC-DC converter
305.
A novel high-voltage half-bridge converter with phase-shifted active rectifier [Electronic resource]
306.
A simplified peak current mode control algorithm for special purpose high voltage IGBT converters
307.
A synthesis-agnostic behavioral fault model for high gate-level fault coverage
308.
A theorem for methods with high-order convergence
309.
A tool for random test generation targeting high diagnostic resolution
310.
A typical wave wake from high-speed vessels : its group structure and run-up
311.
ABB YuMi high-speed pick and place game in action
312.
Achieving a high level of open market-information symmetry with decentralised insurance marketplaces on blockchains
313.
Acoustical barriers for a high speed line "Moscow-St.Petersburg"
314.
Additive manufacturing of CoCrFeMnNi high-entropy alloy/AISI 316L stainless steel bimetallic structures
315.
Additive manufacturing of high-entropy alloys
316.
Advanced condition monitoring method for high voltage overhead lines based on visual inspection
317.
Alalisvooluülekanne [Võrguteavik] : sõnastik = High-voltage direct current (HVDC) transmission : vocabulary (IEC 60633:2019)
318.
Al-SiC nanocomposites produced by high-energy milling and hot pressing
319.
Amino acids are key substrates to Escherichia coli BW25113 for achieving high specific growth rate
320.
An approach for PSL assertion coverage analysis with high-level decision diagrams
321.
An ignored key to high productivity and quality
322.
An improved high-power DC/DC converter for distributed power Generation [Electronic resource]
323.
An improved high-voltage IGBT-based half-bridge converter for railway applications
324.
An improved high-voltage IGBT-based half-bridge DC/DC converter for railway applications
325.
An improved ZVS high step-up converter based on coupled inductor and built-in transformer
326.
An interleaved ZVS high step-up converter for renewable energy systems applications
327.
Anaerobic mesophilic digestion of sludge with extra-thermophilic and high pH pre-treatment
328.
Analysis and comparison of high-frequency link converter topologies
329.
Analysis of current doubler rectifier based high frequency isolation stage for intelligent transformer [Electronic resource]
330.
Analysis of extracellular polymeric substances from pre-treated sludge by high-performance size exclusion chromatography
331.
Analysis of oil shale high-selective mining with surface miner in Estonia
332.
Analysis of oscillation suppression methods in the AC-AC stage of high frequency link converters
333.
Analysis of switching properties of different high voltage IGBTs operating under hard-switching conditions
334.
Annealing effect for SnS thin films prepared by high-vacuum evaporation
335.
Application of high-level decision diagrams for simulation-based verification tasks
336.
Architecture of high-throughput telecommunication network
337.
Aspects of high availability and load balancing in logging infrastructure
338.
Assembling low-level tests to high-level symbolic test frames
339.
Assertion checking with PSL and high-level decision diagrams
340.
Assessment of transmission network voltage unbalance in connection of high-speed electrical railway connection
341.
Association of Longitudinal High-Sensitivity Troponin T with mortality in patients with chronic kidney disease
342.
Atomic layer deposition of high-k dielectrics on carbon nanoparticles
343.
At-speed self-testing of high-performance pipe-lined processing architectures [Electronic resource]
344.
Automated correction of design errors by edge redirection on high-level decision diagrams
345.
Automated design error debug using high-level decision diagrams and mutation operators
346.
Automated test bench generation for high-level synthesis flow ABELITE
347.
Automated test program synthesis for digital systems with high-level decision diagrams
348.
Automatic code generation for embedded systems from high-level models
349.
Autonomous vehicle safety evaluation through a high-fidelity simulation approach
350.
Back-tracing and event-driven techniques in high-level simulation with decision diagrams
351.
Behaviour of high carbonate content fuel in PF and FBC conditions
352.
Behaviour of uremic toxins and UV absorbance in respect to low and high flux dialyzers
353.
Bidirectional isolated ZVS DC-DC converter with auxiliary active switch for high-power energy storage applications
354.
BRCA1 mutations in Estonian high risk breast and ovarian cancer families
355.
Canonical representations of high-level decision diagrams
356.
Capillary zone electrophoresis of phenol and methylphenols at high pH in metanol
357.
Case studies related to power quality problems caused by high-power electrical arc furnaces
358.
Cell-level power supply for high-voltage modular multilevel converters [Electronic resource]
359.
Characterization of sediment pore-water dissolved organic matter of lakes by high performance size exclusion chromatography
360.
Characterization of sediment pore-water dissolved organic matter of lakes by high-performance size exclusion chromatography
361.
Charging of high power pulse capacitors from resonant converter of alternating parallel and series resonance
362.
Cheap euro keeps prices high at gas stations [Online resources]
363.
Chemistry and materials science - high level learning via research and practical training
364.
Code coverage analysis for concurrent programming languages using high-level decision diagrams
365.
Code coverage analysis on high level decision diagrams
366.
Code coverage analysis using high-level decision diagrams [Electronic resource]
367.
Combined biological treatment of high-sulphate wastewater from yeast production
368.
Combined FE and particle swarm algorithm for optimization of high speed PM synchronous machine
369.
Comparative analysis of high power density bidirectional DC-DC converters for portable energy storage applications
370.
Comparative characteristics of diffusion-welded high-voltage stacks and connected in series Schottky diodes
371.
Comparison of GaAs based high voltage diode stacks
372.
Comparison of soft switching methods of DC-AC full bridge high-frequency link converter
373.
Complex simulation of punchthrough, tunneling and high-speed characteristics of scaled bipolar devices and circuits
374.
Comprehensive analysis of proteolysis during 8 months of ripening of high-cooked Old Saare cheese
375.
Computer aided modeling of high frequency power M-S structures
376.
Constant phase element response of impedance spectra of high vacuum evaporated CuIn3Se5 photoabsorber layers [Eectronic resource]
377.
Controlled bidirectional DC circuit breaker with zero negative current for high load shift applications
378.
Controller synthesis in control and memory centric high level synthesis system
379.
Cooling methods for high voltage IGBTs
380.
Cooling methods for high-power electronic systems
381.
Correct reuse of complex design units during high level synthesis : verification issues
382.
Correction of the short-term forecast of high-voltage power consumption
383.
Crack formation and control in an AlCoCrFeNi high entropy alloy fabricated by selective laser melting
384.
Crest-trough asymmetry of waves generated by high-speed ferries
385.
Crystallisation behaviour of bimodal blends of high-density polyethylene
386.
Crystallisation behaviour of high density polyethylene blends with bimodal molar mass distribution
387.
Crystallization behavior of some unimodal and bimodal linear low-density polyethylenes at moderate and high supercooling
388.
Crystallization of multimodal polyethylene at high cooling rates by combined sals and ultrafast calorimetry methods
389.
Cubic iron core-shell nanoparticles functionalized to obtain high-performance MRI contrast agents
390.
Cubic Iron Core–Shell Nanoparticles Functionalized to Obtain High-Performance MRI Contrast Agents
391.
Culturally-sensitive cybersecurity awareness program design for Iranian high-school students
392.
Cycle-based simulation algorithms for digital systems using high-level decision diagrams
393.
Decomposition-oriented extraction of the control path from high-level behavioral descriptions
394.
Dependability evaluation in fault-tolerant systems with high-level decision diagrams
395.
Design of high frequency transformer for isolated bridge-type PFC converter
396.
Design of high-frequency transient current sensor for powerline on-line measurement
397.
Determination of high frequency parameters of an induction motor drive
398.
Development and verification of control and protection algorithms for the special purpose high power converters
399.
Development of 50-kW isolated DC/DC converter with high-voltage IGBTs
400.
Development of 50-kW isolated DC/DC converter with high-voltage IGBTs [Electronic resource]
401.
Development of cemented carbides with high chromium iron alloy binder = Kõrge kroomisisaldusega rauasulamsideainega kõvasulamite arendus
402.
Development of high definition protein from cheese whey
403.
Development of high fidelity liver and kidney phantom organs for use with robotic surgical systems
404.
Development of methodology and equipment for studying crystallization behaviour of novel PE materials at high supercooling
405.
Diagnostic modeling of digital systems with low- and high-level decision diagrams
406.
Diagnostic modeling of microprocessors with high-level decision diagrams
407.
Diagnostic modelling of digital systems with binary and high-level decision diagrams
408.
Digital current mode control algorithms for high-power half-bridge DC/DC converters
409.
Digitalization of high speed craft design and operation challenges and opportunities
410.
Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
411.
Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
412.
Does high-speed railway influence convergence of urban-rural income gap in China?
413.
Downward continuation of airborne gravity data using high-resolution global geopotential models
414.
Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools
415.
Drinking water production from well water with high sulfur and sulfur bacteria content
416.
Dry sliding wear of cermets under high-speed conditions
417.
EDLC durable electrodes and capacitor for high frequency applications
418.
Efect of ozonation on the thermal behaviour and morphology state of high-density polyethylene
419.
Effect of alkylsulfonate on thermal behavior and structure of high-density polyethylene
420.
Effect of imperfect CSI on interference alignment in multiple-high altitude platforms based communication
421.
Effect of pulsed deuterium plasma irradiation on dual-phase tungsten high-entropy alloys
422.
Effect of solvent treatment on crystallisation behaviour of high-density polyethylene
423.
Electric vehicle fast charger high voltage input multiport converter topology analysis [Electronic resource]
424.
Electro-deposited nano-Ni/reduced graphene oxide composite film of corrugated surface for high voltammetric sensitivity
425.
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
426.
EMC considerations on PCB design for a high-power converter control system [Electronic resource]
427.
EMI problems of current measurements in inverters with high switching frequency
428.
EMI problems of current measurements in inverters with high switching frequency [Electronic resource]
429.
EMI problems of the high frequency 3-phase rectifier
430.
Employees' psychological characteristics and sustainable leadership in firms with high and low entrepreneurial orientation
431.
Energy-efficient high-voltage switch based on parallel connection of IGBT and IGCT [Electronic resource]
432.
Enhanced mobility of high-frequency discrete breathers in a monatomic chain with odd anharmonicity
433.
Enhancement of Unmanned Aerial Vehicle photogrammetry by high-resolution airborne laser scanning data [Electronic resource]
434.
Enzymatic synthesis and polymerization of isosorbide-based monomethacrylates for high-Tg plastics
435.
Evaluation of different loss calculation methods for high-voltage IGBT-s under small load conditions
436.
Evaluation of GaN HEMTs for high-voltage stage of isolated DC-DC converters
437.
Evaluation of high performance aluminum for microwave filters
438.
Evaluation of high power factor three-phase diode rectifiers with parallel-resonant input filters
439.
Evaluation of low- and high-voltage GaN transistors in soft-switching DC-DC converter
440.
Event driven method for transient simulation of high frequency digital circuits
441.
Evolution of microstructure and hardness in aluminum processed by high pressure torsion extrusion
442.
Evolution of TiN coating surface roughness during physical vapor deposition on high speed steel substrate
443.
Experimental Investigation of high frequency 3L-NPC qZS inverter for photovoltaic application
444.
Experimental investigation of the high-speed combustion of different oil shales
445.
Experimental prototype of high-efficiency wind turbine based on Magnus effect
446.
Experimental study of high step-up quasi-Z-source DC-DC converter with synchronous rectification
447.
Experimental study of the high speed ultrasonic time-of-flight to digit converter
448.
Exploiting high-level descriptions for circuits fault tolerance assessments
449.
Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
450.
Fault detection and protection system for the power converters with high-voltage IGBTs [Electronic resource]
451.
Fault effect reasoning in digital systems by topological view on low- and high-level decision diagrams
452.
Fault modeling and test generation with low- and high-level decision diagrams
453.
Fault tolerant control of a grid-connected microgrid with high penetration of renewable energy
454.
Fault-tolerant high step-up DC-DC converters
455.
Feed-forward neural networks for smooth operation of the high-voltage power transmission network
456.
Floating high step-down stacked dc-dc converter based on buck-boost cells [Electronic resource]
457.
Formalization of finite state machines with data path for the verification of high-level synthesis
458.
Full soft-switching high step-up current-fed DC-DC converters with reduced conduction losses
459.
Full soft-switching high step-up DC-DC converter for photovoltaic applications
460.
Functional self-test of high-performance pipe-lined signal processing architectures
461.
GaAs based diffusion welded high voltage diode stacks [Electronic resource]
462.
Gas-solid particle flow in horizontal channels at high mass loadings [Electronic resource]
463.
Half-bridge trans-Z-source inverter with high boost factor
464.
Harmonic suppression in high power DC controlled reactors for AC power transmission lines
465.
High accuracy filter transmission measurement for determination of the detection efficiency calibration of Si-SPAD detectors
466.
High ambient radiofrequency radiation in Stockholm city, Sweden
467.
High definition gelling agent from the local seaweed
468.
High efficiency cell-free protein biosynthesis
469.
High efficient photovoltaics in Estonia
470.
High energy milling of WС-FeСr cemented carbide
471.
High frequency intrinsic localized modes in solids: an example of metallic Ni
472.
High level decision diagrams and characteristic polynomials
473.
High level fault modeling in digital systems
474.
High order iterative methods for decomposition-coordination problems
475.
High order iterative methods for problems in mathematical modelling
476.
High performance GaAs power diodes
477.
High performance workplace design model
478.
High photosensitivity monograin materials and devices
479.
High power DC controlled reactor for AC power transmission lines
480.
High power factor AC-DC line-frequency resonant converter for deeply varying loads
481.
High power factor converter for normalizing flicker of arc furnaces
482.
High power factor rectifiers for DC arc furnaces
483.
High power saturable reactors for AC power transmission lines
484.
High quality LPE GaAs power diodes with DLTS method
485.
High quality metal ceramic interfaces using diffusion welding technology
486.
High quality test generation for digital systems
487.
High reliability leadership : a conceptual framework
488.
High resolution multi-beam sonar [Electronic resource]
489.
High school students' acquisition of knowledge and skills through self-organization and collaboration
490.
High school students' acquisition of knowledge and skills through web-based collaboration
491.
High selective oil shale mining
492.
High speed data preprocessing for bioimpedance measurements : architectural exploration
493.
High strength ductile aluminium matrix composite = Kõrgtugev ja plastne alumiiniumkomposiitmaterjal
494.
High strength steel behaviour during hot dip galvanizing
495.
High vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid PV structures with conductive polymers
496.
High vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid structures
497.
High velocity thermal sprayed coatings from hardmetal powders
498.
High voltage diffusion‐welded stacks on the basis of SiC Schottky diodes
499.
High voltage GaAs diode stacks : the choice of epistructures for assembling
500.
High work ability in the scientific activity of older and experienced academics
501.
High-accuracy eddy current measurements of metals
502.
High-accuracy reference standards for quantitative two-photon absorption spectroscopy = Kõrgtäpsusega standardid kvantitatiivses kahefootonses neeldumisspektroskoopias
503.
High-attenuation tunnel-type detector for calibration of single-photon devices
504.
High-efficiency 312-kVA three-phase inverter using parallel connection of silicon carbide MOSFET power modules
505.
High-efficiency internal combustion engine for unmanned aircraft use
506.
High-efficiency internal combustion engine used in the unmanned aircraft
507.
High-efficiency predictive control of pumping
508.
High-efficiency quad-mode parallel PV power optimizer for DC microgrids
509.
High-efficiency single-stage onboard charger for electrical vehicles
510.
High-energy ball milling of Nd-Fe-B powders
511.
High-energy sources at low radio frequency : the Murchison Widefield Array view of Fermi blazars
512.
High-frequency current sensor for power network on-line mea[s]urements
513.
High-frequency split-bobbin transformer design with adjustable leakage inductance
514.
High-Gain Seven-Level Switched-Capacitor Two-Stage Multi-Level Inverter
515.
High-K ZrO2 thin films by chemical spray pyrolysis method [Online resource]
516.
High-key paljundus
517.
High-level axioms for graphical linear algebra
518.
High-level CERN delegation visiting Estonia [Online resource]
519.
High-level combined deterministic and pseudoexhuastive test generation for RISC processors
520.
High-Level Combined Deterministic and Pseudo-exhuastive Test Generation for RISC Processors
521.
High-level decision diagram based fault models for targeting FSMs
522.
High-Level Decision Diagram manipulations for code coverage analysis
523.
High-level decision diagram simulation for diagnosis and soft-error analysis
524.
High-level decision diagrams based coverage metrics for verification and test
525.
High-level decision diagrams for improving simulation performance of digital systems
526.
High-level design error diagnosis using backtrace on decision diagrams
527.
High-level fault diagnosis in RISC processors with Implementation-Independent Functional Test
528.
High-level functional test generation for microprocessor modules
529.
High-Level Implementation-Independent Functional Software-Based Self-Test for RISC Processors
530.
High-level intellectual property obfuscation via decoy constants
531.
High-level modeling and testing of multiple control faults in digital systems
532.
High-level path activation technique to speed up sequential circuit test generation
533.
High-level specification of games
534.
High-level synthesis and test in the MOSCITO-based virtual laboratory
535.
High-level synthesis of control and memory intensive communication systems
536.
High-level test data generation for software based self-test in microprocessors
537.
High-level test generation for processing elements in many-core systems
538.
High-level test synthesis with hierarchical test generation
539.
High-performance analogue measurement using internal enhanced PWM and ADC of a DSP-chip
540.
High-performance buck-boost partial power quasi-Z-source series resonance converter
541.
High-performance hardware accelerators for sorting and managing priorities
542.
High-performance information processing in distributed computing systems
543.
High-performance size exclusion chromatographic characterisation of dissolved organic matter from seawater using fluorescense detection
544.
High-performance size exclusion chromatography analysis of lake sediment pore-water dissolved organic matter
545.
High-performance size-exclusion chromatographic and spectrometric analysis of dissolved organic matter in lakewater samples
546.
High-Q active bandbass filters
547.
High-Q bandpass filters based on immittance converters
548.
High-quality consistent analysis-synthesis in sinusoidal coding
549.
High-quality organisation and management of urban life
550.
High-resolution ice dynamics in the Gulf of Finland
551.
High-resolution seismic imaging of Paleozoic rocks in the Mora area, Siljan Ring structure, central Sweden
552.
High-resolution trilobite stratigraphy of the Lower–Middle Ordovician Öland Series of Baltoscandia
553.
High‐resolution view on downwelling by underwater gliderin the Eastern Baltic Proper
554.
High-resolution view on the subsurface salinity maxima in the Gulf of Riga
555.
High-sensitive compact laser device for moving particle registration
556.
High-sensitivity compact moving particles detector with an external-cavity laser diode
557.
High-specific strength cermet for production of anti-skid studs
558.
High-speed asynchronous machines
559.
High-speed logic level fault simulation
560.
High-speed matrix processor for embedded systems
561.
High-speed thermogravimetric analysis of the combustion of wood and Ca-rich fuel
562.
High-speed thermogravimetric analysis of the combution of wood and Ca-rich fuel
563.
High-strength aluminum alloy of ultrafine grained by consolidation-ECAP
564.
High-strength fuel pellets made of flour milling and coal slack wastes
565.
High-throughput pipeline for polydisperse droplet analysis
566.
High-vacuum evaporation of n-CuIn3Se5 photoabsorber films for hybrid PV structures
567.
High-voltage diffusion‐welded stacks on the basis of SiC Schottky diodes
568.
High-voltage frequency converter with multiprocessor control system
569.
High-voltage half-bridge IGBT inverter [Electronic resource]
570.
High-voltage IGBT based converters for rolling stock : possibilities and challenges
571.
High‐voltage pulse transformer for IOT modulators
572.
High-voltage switch realization possibilities for the 3.0 kV DC fed voltage converters
573.
Holocene rapid climate changes and ice-rafting debris events reflected in high-resolution European charcoal records
574.
How to generate high quality tests for digital systems
575.
Human peripheral blood eosinophils express high levels of the purinergic receptor P2X4
576.
Identification of excitons and biexcitons in Sb2Se3 under high photoluminescence excitation density
577.
Impact of high energy milled activation on the thermal properties of Bulgarian and Estonian natural apatites
578.
Impedance measurement solution based on the high time resolution DSP
579.
Impedance-source inverter-based high-power DC/DC converter for fuel cell applications
580.
Implementation of high-voltage IGBTs in power electronic converters for the rolling stock
581.
Implementation of snubber circuits in power converters with high-voltage IGBTs
582.
Implementation possibilities of SMD capacitors for high power applications
583.
Improved high-power-factor three-phase diode rectifiers using ripple-power re-rectification
584.
Improved high-power-factor three-phase diode rectifiers using ripple-power re-rectification [Electronic resource]
585.
Improved VHDL input for high-level synthesis tool xTractor
586.
Indoor humidity load in dwellings with high occupancy
587.
Induction of resistance mechanisms in Rhodotorula toruloides for growth in sugarcane hydrolysate with high inhibitor content
588.
In-field detection of degradation on PCB assembly high-speed buses
589.
Influence of SiO2 on the thermal behavior of high-energy activated natural phosphorites
590.
Insights into the string-barrier interaction dynamics based on high-speed camera measurements
591.
INSL5 is a high affinity specific agonist for GPCR142(GPR100)
592.
Integration of high-level synthesis to the courses on reconfigurable digital systems
593.
Interlock delay time minimization and its impact on the high-voltage half-bridge DC/DC converter
594.
Investigation of anaerobic treatment of extremely high concentrated waste in the cheese industry
595.
Investigation of different free image analysis software for high-throughput droplet detection
596.
Investigation of the causes behind the vibrations of a high-speed solid-rotor induction motor
597.
Isolation and chemical treatment procedures for high quality carrageenans
598.
IT-enabled international promotion of technology transfer for high-tech enterprises
599.
Large area high quality interfaces to SiC substrates - technology and modelling
600.
Linear patterning of high entropy alloy by additive manufacturing
601.
Low-carbohydrate high-fat weight reduction diet induces changes in human gut microbiota
602.
Maarja Kruusmaa - transforming nature's design into high tech
603.
Magnetic current sensor stray components in high frequency operation and their effects
604.
Magnetically integrated high step-up resonant DC-DC converter for distributed photovoltaic systems
605.
Measurement and operation based condition monitoring methodology for high voltage circuit breakers
606.
Measuring crystallization kinetics of high density polyethylene by improved hot-stage polarized light microscopy
607.
Mechanical recycling of electronic wastes by high-energy disintegrator mills
608.
Mechanism for single crystal refinement in high purity niobium during equal-channel angular pressing
609.
Microcontroller control device for high speed control solenoids
610.
Microstructure and nanoindentation creep behavior of binary Al-Cu alloy synthesized at high pressure
611.
Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying
612.
Microstructure and properties that change during hard cyclic visco-plastic deformation of bulk high purity niobium
613.
Middle-frequency isolation transformer design issues for the high-voltage DC/DC converter
614.
MIMO reinforcement learning based approach for frequency support in microgrids with high renewable energy penetration
615.
Minimisation of higher harmonics in high power saturable reactors for AC power transmission lines
616.
Minimization of the high-level fault model for microprocessor control parts [Online resource]
617.
Modeling microprocessor faults on high-level decision diagrams [Electronic resource]
618.
Modeling of a vortex ring flow at high Reynolds number
619.
Modeling of high-concentration gas-particle flow in a horizontal channel
620.
Modeling of long waves from high speed ferries in coastal waters
621.
Modelling of high frequency voltage transients of electrical motors
622.
Modification of closure depths by synchronisation of severe seas and high water levels
623.
Modified high voltage gain soft-switched quasi-switched boost inverter
624.
Multi-cell DC-DC converter with high step-down voltage ratio [Electronic resource]
625.
Multiple control fault testing in digital systems with high-level decision diagrams
626.
Multiple fault testing in systems-on-chip with high-level decision diagrams
627.
Mutation analysis with high-level decision diagrams
628.
Nanoporous carbon-based electrodes for high strain ionomeric bending actuators
629.
Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation
630.
Nanostructure and properties study of advanced high purity rare metals
631.
New bi-directional DC/DC converter for supercapacitor interfacing in high-power applications
632.
New fault models and self-test generation for microprocessors using High-Level Decision Diagrams
633.
New high frequency surface fatigue wear tester : design and first results
634.
New high-gain non-inverting buck-boost converter
635.
New high-gain step-up DC/DC converter for a fuel cell interfacing in hydrogen buffer
636.
New high-gain transformerless DC/DC boost converter system
637.
New step-up DC/DC converter with high-frequency isolation
638.
NiO reduction by Mg plus C combined reducer at high heating rates
639.
Noise and vibration estimation on the territory near high speed trains railway
640.
Noise pollution problems of high-speed railway St.Petersburg-Moscow
641.
Novel thermochemical metal halide treatment to high-performance Sb2Se3 photocathode
642.
Novel welding of Al0.5CoCrFeNi high-entropy alloy: corrosion behavior
643.
NV-SP: A new high performance and low energy NVM-Based scratch pad
644.
Oil spray cooling with hairpin windings in high-performance electric vehicle motors
645.
On automatic software-based self-test program generation based on high-Level decision diagrams
646.
On evaluation of high frequency channel parameter
647.
On high order iterative methods for nonlinear problems
648.
On high order iterative methods for non-linear problems
649.
On the mass spectrum for some high-spin wave equations
650.
On the solution of nonlinear optimization problems of high dimension
651.
On the solution of nonlinear optimization problems of high dimension [Electronic resource]
652.
Open source hardware cost-effective imaging sensors for high-throughput droplet microfluidic systems
653.
Optical detection methods for high-throughput fluorescent droplet microflow cytometry
654.
Optical properties of high quality Cu2ZnSnSe4 thin films
655.
Optimal condition monitoring of high voltage circuit breakers
656.
Optimization and Design of Planar Transformer for the High Frequency Link Converter
657.
Optimizing ventricular fibers : uniform strain or stress, but not ATP consumption, leads to high efficiency
658.
Output filter for the high-voltage DC/DC converter
659.
Overview about low-level and high-level decision diagrams for diagnostic modeling of digital systems
660.
Overview about low-lewel and high-level decision diagrams for diagnostic modeling of digital systems
661.
Pantograph noise - a sound source relevant to high-speed trains?
662.
Parameters identification and modeling of high-frequency current transducer for partial discharge measurements
663.
Pb and Bi nanoclaster precipitation in high-dose implated and RTA Si: SEM and RHEED analyses
664.
Performance of polyimide and PTFE based composites under sliding, erosive and high stress abrasive conditions
665.
Photoluminescence study of B-trions in MoS2 monolayers with high density of defects
666.
Physical parameters for a class of high-spin wave equations
667.
Possibilities and limitations of liquid cooling systems for high power converters
668.
Possible high-pressure structures of sulfur trioxide
669.
Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy
670.
Power semiconductor devices for high-current electronic
671.
Prediction of high-frequency intrinsic localized modes in Ni and Nb
672.
Probabilistic equivalence checking based on high-level decision diagrams
673.
Profiles of waves from high-speed ferries in the coastal area of Tallinn Bay
674.
PSL assertion checking using temporally extended high-level decision diagrams
675.
PSL assertion checking with temporally extended high-level decision diagrams
676.
Quartz nonlinear high level signal modelling
677.
Reactive carburizing sintering - a novel production method for high quality chromium carbide-nickel cermets
678.
Reactive power control for bidirectional isolated high-frequency link converter
679.
Reactive sintering of (Ti,W)C-Ni and TiC-FeNiSi cermets from high-energy milled powders
680.
Recycling of reinforced acrylic plastic wastes by high energy mills
681.
Regenerative passive snubber circuit for high-frequency link converters
682.
Research of over-voltages and other high frequency phenomena in long cable AC drives
683.
Research of over-voltages and other high frequency phenomena in long cable AC drives [Electronic resource]
684.
Residential buildings with heat pumps peak power reduction with high performance insulation
685.
Results of measurements in high precision sonar systems
686.
Retreatment of industrial plastic wastes by high energy disintegrator mills
687.
Revolver : a high-performance MIMD architecture for collision free computing
688.
Safety performance in high reliability organizations (I) : the role of leadership
689.
Sandy coast cross-shore profile changes in a high wave energyenvironment, Palanga, Baltic Sea
690.
Sea state in the Baltic Sea from space-borne high-resolution synthetic aperture radar imagery
691.
Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy
692.
Selective laser melting of in-situ CoCrFeMnNi high entropy alloy : effect of remelting
693.
Selective laser melting of TiB2-Ti composite with high content of ceramic phase
694.
Self-adjusting resonant converters and application by high power electrical arc furnaces
695.
Sheppard-Taylor isolated high boost DC-DC converter [Electronic resource]
696.
Shoaling and runup of long waves induced by high-speed ferries in Tallinn Bay
697.
Sidescan sonar with high resolution
698.
Sidescan sonar with high resolution [Electronic resource]
699.
Simulation of digital systems with high-level decision diagrams
700.
Simulation of patterns of wakes from high-speed ferries in Tallinn Bay
701.
Simulation study of high step-up quasi-Z-source DC-DC converter with synchronous rectification
702.
Simulation-based hardware verification with high-level decision diagrams = Simuleerimisel põhinev riistvara verifitseerimine kõrgtaseme otsustusdiagrammidel
703.
Simulation-based verification with APRICOT framework using high-level decision diagrams
704.
Sintering and fouling characterization of ashes with high calcium oxide content
705.
Sintering of high Mn cemented carbides in Mn-rich environment
706.
6.5 kV IGBT switch realization possibilities and their feasibility study for high-power applications
707.
Software-based self-test generation for microprocessors with high-level decision diagrams
708.
Solidification of Al-xCu alloy under high pressures
709.
Solution combustion synthesis and spark plasma sintering of magnetic high entropy materials
710.
Solution processed high-K oxides for application as gate dielectric layer in thin film transistor
711.
Solving EMI problems of a high-frequency DC-DC converter
712.
Some research aspects of high noise reasons of buses
713.
Spark plasma sintered Nd-Fe-B magnets from high-energy ball milled powders
714.
Spatial mobilities in a ‘high-speed society’
715.
Starting from scratch : rewards of high public office in Estonia
716.
Stroboscopic sampling in comprehensive high-performance liquid chromatography-capillary electrophoresis via a pneumatic sampler
717.
Structure of solar radiation at high latitudes
718.
Study of activating treatment for glass/ITO/CdS/CdTe structures prepared by high vacuum evaporation
719.
Study of high brightness RGB light-emitting diode color control systems
720.
Sub 1-V low noise high PSRR LDO with improved load transient [Electronic resource]
721.
Sulfate-reducing anaerobic ammonium oxidation as a potential treatment method for high nitrogen-content wastewater
722.
Synthesis of high-level decision diagrams for functional test pattern generation
723.
Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion
724.
Temporally extended high-level decision diagrams for PSL assertions simulation
725.
Terahertz spectroscopy of spin excitations in magnetoelectric LiFePO4 in high magnetic fields
726.
The binding of polycyclic aromatic compounds to humic acid studied by high performance liquid chromatography
727.
The fouling of steam boiler heating surfaces in burning high calcium oxide content fuels
728.
The impedance spectroscopy of CuIn3Se5 photoabsorber films prepared by high vacuum evaporation technique
729.
The impedance spectroscopy of well-oriented CuIn3Se5 films prepared by high vacuum evaporation technique
730.
The investigation of distributed non-quasi-static high-current-density effects in advanced transistors
731.
The kinetics of enzymatic hydrolysis of concentrated sucrose solutions in high conversion case
732.
The methodology of high-voltage instrument transformers technical state index assessment
733.
The use of high-resolution bathymetry for circulation modelling in the Gulf of Finland
734.
Thermoreactive polymer composite with high particulate filler content = Suure pulbrilise täiteaine sisaldusega termoreaktiivne polümeerkomposiit
735.
TMS320F28335-based high-accuracy complex network analyzer instrument
736.
tool for model-order reduction of power systems with high penetration of power electronic devices
737.
Torwards high-quality engineering education in Estonia
738.
Toward automatic condition assessment of high-voltage transmission infrastructure using deep learning techniques
739.
Towards a high-level programming language for IoT and robotics
740.
Towards artificial intelligence based automatic adaptive response analyzer for high frequency analog BIST
741.
Towards high impact smart cities: a universal architecture based on connected intelligence spaces
742.
Traffic safety comparison of some post-socialist and high-developed countries [Electronic resource]
743.
Transient analysis of high-voltage half-bridge inverter during freewheeling states
744.
TransMem : a memory architecture to support dynamic remapping and parallelism in low power high performance CGRAs
745.
Transparent TiO2 thin films with high photocatalytic activity for indoor air purification
746.
Treatment of high-strength wastewater by Fe2+-activated persulphate and hydrogen peroxide
747.
Two new high power factor single-phase diode rectifiers using optimum ripple-power conversion [Electronic resource]
748.
2001. International diffusion of high technology : an IT supported training approach [Electronic resource]
749.
Ultra high-pressure spark plasma sintered ZrC-Mo and ZrC-TiC composites
750.
Ultra-High gain modified SCLN based DC-DC converter with reduced device current stress
751.
Ultra-high step-up DC-DC converters based on center-tapped inductors
752.
Unchanged mitochondrial organization and compartmentation of high-energy phosphates in creatine-deficient GAMT(-/-) mouse hearts
753.
Understanding MPSoCs: exploiting memory microarchitectural vulnerabilities of high performance NoC-based MPSoCs
754.
Use of atomic-force microscopy for characterization of silicon, implated with heavy ions at high doses
755.
Use of high resolution sea level measurements for height transfer in the West-Estonian archipelago
756.
Using high-resolution spectral models of gravity anomaly for computing stochastic modifications of Stokes's formula
757.
Using high-resolution tritium profiles to quantify the effects of melt on two Spitsbergen ice cores
758.
Using microcontrollers for high accuracy analogue measurements
759.
Using of ozone in high quality drinking water production
760.
Utilization of Estonian oil shale as high carbonates content fuel
761.
Utilization of high calcium oxide and alkali metal content fuel at the thermal power plants
762.
Utilization of high calcium oxide and alkali metal contentfuel at the thermal power plants
763.
Utilization of high speed steel grinding waste for cutting tools production
764.
Validation of multi-satellite altimetry data utilizing a high-resolution marine geoid for the Baltic Sea
765.
Variability in the properties of long waves generated by high-speed ferries in Tallinn Bay
766.
Variability in the properties of wakes generated by high-speed ferries
767.
Wear resistance of high velocity thermal sprayed coatings
768.
Verification and error correction on High-Level Decision Diagrams
769.
Very high-speed signal rectification using current conveyors
770.
VHDL front-end for high-level synthesis tool xTractor
771.
Wide input voltage range high step-up DC-DC vonverter with fault-tolerant operation capability
772.
Wide-range operation of high step-up DC-DC converters with multimode rectifiers
773.
Voltage gain extension techniques for high step-up galvanically isolated DC-DC converters
774.
Work-cells concept development for high mix low volume market conditions
775.
xTractor : an academic high-level synthesis tool for control and memory intensive applications
võtmesõna
200
1.
High-Pressure High-Temperature Spark Plasma Sintering
2.
C. high temperature corrosion
3.
high temperature
4.
high temperature corrosion
5.
high temperature fatigue
6.
high temperature impact-abrasion
7.
high temperature tribology
8.
high temperature wear
9.
high-temperature
10.
high-temperature ceramic superconductors
11.
high-temperature differential thermal analysis (HDTA)
12.
high-temperature wear
13.
self-propagating high temperature synthesized (SHS)
14.
Self-Propagating High-Temperature Synthesis
15.
high-speed temperature scanner
16.
high temperatures
17.
air–water temperature difference
18.
classroom temperature
19.
color temperature
20.
colour temperature
21.
crystallization temperature
22.
design outdoor temperature
23.
elevated temperature
24.
indoor air temperature gradient
25.
indoor temperature
26.
indoor temperature after renovation
27.
low temperature
28.
low temperature district heating
29.
low temperature heating
30.
low temperature pyrolysis
31.
low temperature synthesis
32.
low-temperature
33.
low-temperature heat sources
34.
low-temperature district heating
35.
low-temperature heat sources
36.
low-temperature plasma
37.
low-temperature sulphur corrosion
38.
magma temperature
39.
mean radiant temperature
40.
Negative bias temperature instability
41.
Negative Bias Temperature Instability (NBTI)
42.
operative temperature
43.
positive temperature coefficient
44.
pressing temperature
45.
pressure-temperature conditions
46.
pyrolysis end-temperature
47.
radiant temperature
48.
radiative temperature
49.
return temperature
50.
room and hot temperature pressing
51.
room temperature
52.
room-temperature fluoride ion batteries
53.
sea surface temperature
54.
sea surface temperature (SST)
55.
sintering temperature
56.
temperature
57.
temperature change
58.
temperature control
59.
temperature dependence
60.
temperature effect
61.
temperature effects
62.
temperature extremes
63.
temperature factor
64.
temperature forecast
65.
temperature gradient
66.
temperature in contact area
67.
temperature influence
68.
temperature measurement
69.
temperature measurements
70.
temperature metrology
71.
temperature proxy
72.
temperature scale
73.
temperature sensors
74.
temperature setback efficiency
75.
water temperature
76.
weld temperature
77.
Very-low temperature crystallization peak
78.
working temperature of luminaires
79.
Al0.1CoCrFeNi high-entropy alloy
80.
bimodal high-density polyethylene (HDPE) PE100
81.
dual-phase high-entropy alow
82.
effect of high bide
83.
eutectic high entropy alloys
84.
high
85.
high boost converter
86.
high context and low context cultures
87.
high cycle fatigue
88.
High Cycling Stability
89.
high efficiency
90.
high electricity consumption
91.
high energy ballmilling
92.
high energy milled activation
93.
high energy milling
94.
high entropy alloy
95.
high entropy alloys
96.
high frequency instability
97.
high frequency link
98.
high frequency link converters
99.
high frequency link DC-AC converter
100.
high gain boost converter (HGBC)
101.
high gain dc/dc converter
102.
High gain step up DC-DC converter
103.
high heating rate
104.
high level DD (HLDD)
105.
high level synthesis
106.
High Performance DSC (HPer DSC)
107.
high performance liquid chromatography (HPLC)
108.
high pressure liquid chromatography procedure
109.
high pressure torsion
110.
High Pressure Torsion Extrusion
111.
high reliability leadership
112.
high reliability management
113.
high reliability organizations
114.
high school
115.
high school student
116.
high schools
117.
high speed craft (HSC)
118.
high speed machining
119.
high speed measurement
120.
high step up/down
121.
high step-down conversion ratio
122.
high step-up
123.
high step-up converters
124.
high step-up power converter
125.
high strength
126.
high surface area carbon
127.
high switching frequency
128.
high tech industries
129.
High technologies park HTP
130.
high technology
131.
high throughput sequencing
132.
high voltage
133.
High voltage circuit breaker
134.
high voltage gain
135.
high voltage power converters
136.
high-cooked cheese
137.
high-density apolipoprotein A
138.
high-energy astrophysics
139.
high-energy ball milling
140.
high-entropy alloy
141.
high‐entropy alloy
142.
high-entropy alloys
143.
high-entropy nanocomposites
144.
high-fidelity simulator
145.
high-frequency data
146.
high-frequency link converter
147.
high-frequency model
148.
high-frequency sensor
149.
high-frequency transformer
150.
high-frequency transformers
151.
high-frequency transients
152.
high-gain non-inverting buck-boost converter
153.
high-intensity interval training
154.
high-level control fault model
155.
high-level control faults
156.
high-level decision diagram
157.
high-level decision diagrams
158.
high-level decision diagrams (HLDD) synthesis
159.
high-level expert group on AI
160.
high-level fault coverage
161.
high-level fault model
162.
high-level fault simulation
163.
high-level functional fault model
164.
High-Level Synthesis (HLS)
165.
high-level synthesis for test
166.
high-level test data generation
167.
high-penetration renewable energy
168.
high-penetration renewable energy sources (RESs)
169.
high-performance computer systems
170.
high-performance computing systems
171.
high-performance computing systems, Information processing
172.
high-performance liquid chromatography
173.
high-performance liquid chromatography-diode array detector-mass spectrometer
174.
high-performance photocathode
175.
high-performance ports
176.
high-precision levelling
177.
high-pressure annealing
178.
high-pressure solidification
179.
high-pressure torsion
180.
high-resolution (HR)-PWM
181.
high-resolution biostratigraphy
182.
high-schools
183.
high-spatial resolution
184.
high-speed
185.
high-speed MAS (magic angle spinning)
186.
high-speed planing crafts
187.
high-speed railway
188.
high-speed serial link test
189.
high-speed thermogravimetric analysis
190.
high-strength wastewater
191.
high-Tc superconductors
192.
high-throughput
193.
high-vacuum evaporation
194.
High-voltage techniques
195.
high-κ dielectrics
196.
logic level and high level BDDs
197.
low-context and high-context
198.
ultra high
199.
ultra High gain boost converter (UHGBC)
200.
very high-resolution numerical modelling
allikas
32
1.
Creep and Fracture in High Temperature Components : April 21-23, 2009, Zurich, Swizerland
2.
High temperature
3.
High temperature materials and processes
4.
High temperature processes in chemical engineering
5.
International Journal of Self-propagating High-temperature Synthesis
6.
E-MRS Spring Meeting 2004 : May 24-28, 2004. Symposium K, Solid state ionics : high temperature vs. low temperature defect chemistry
7.
Proceedings of 7th International Conference "Brazing, High Temperature Brazing and Diffusion Welding" : June 15-17, 2004, Aachen, Germany
8.
SHS 2017 : XIV International Symposium On Self-Propagating High Temperature Synthesis, September 25-28, 2017, Tblisi, Georgia : Book of Abstracts
9.
The International Conference Dedicated to the 50th Anniversary of Self-Propagating High Temperature Synthesis (SHS-50) : proceedings = Международная конференция СВС-50, приуроченная к 50-летнему юбилею научного открытия
10.
Journal of low temperature physics
11.
Low temperature physics
12.
Imaging, Multi-Scale and High Contrast Partial Differential Equations : Seoul ICM 2014 Satellite Conference Imaging, Multi-scale and High Contrast PDEs, August 7-9, 2014, Daejeon, Korea
13.
Dagstuhl Seminar 9509 : High Integrity Programmable Electronics Systems, February 27-March 03, 1995
14.
High Blood Pressure & Cardiovascular Prevention
15.
High Blood Pressure & Cardiovascular Prevention
16.
High integrity systems
17.
High performance and optimum design of structures and materials
18.
High performance structure and materials. VI
19.
HRC : Journal of high resolution chromatography
20.
HSMV 2020 : Proceedings of the 12th Symposium on High Speed Marine Vehicles
21.
International Conference High Speed Vessels : 1st-2nd July 2020, London, UK : papers [Online resource]
22.
Journal of high energy physics
23.
Performance Management : Designing the High-Performing Organization : 25-27 June 2014, Aarhus, Denmark : conference proceedings
24.
Precambrian high-grade mobile belts : extended abstracts
25.
Proceedings of the IEEE 13th Workshop on RTL and High Level Testing (WRTLT'12)
26.
Rewards for high public office in Europe and North America
27.
Roomvent&Ventilation 2018 : Excellent Indoor Climate and High Performing Ventilation : proceedings
28.
Special Edition of IEEE Transactions on Industrial Electronics on High Power Factor Rectifiers
29.
The Ninth IEEE Workshop on RTL and High Level Testing (WRTLT 2008), Sapporo, Japan
30.
11th International Conference on Solar Energy at High Latitudes NORTHSUN 2007 : abstract book
31.
29th International Symposium on High Performance liquid Phase Separations and Related Techniques
32.
3rd International Probiotic Conference : High Tatras, Slovakia, June 4-7, 2008 : abstract book
kirjastus/väljaandja
2
1.
Helsinki University of Technology. Low Temperature Laboratory
2.
High Education Press
seeria-sari
1
1.
Materials for low temperature electrochemical systems ; 8
×
vaste
algab
lõpeb
sisaldab
reasta
Relevantsuse alusel
kasvavalt
kahanevalt
ilmumisaasta
autor
TTÜ struktuuriüksus
märksõna
seeria-sari
tema kohta
võtmesõna
Otsing
Valikud
0
ilmumisaasta
AND
OR
NOT
autor
AND
OR
NOT
TTÜ struktuuriüksus
AND
OR
NOT
märksõna
AND
OR
NOT
seeria-sari
AND
OR
NOT
tema kohta
AND
OR
NOT
võtmesõna
AND
OR
NOT